PDN-ENTITY-REDUNDANCY-MIB
This management information module supports the
objects to be used for redundancy of entities.
pdnEntRedunMIB
1.3.6.1.4.1.1795.2.24.2.41.1
Imported Objects
| ENTITY-MIB | entPhysicalIndex |
| PDN-HEADER-MIB | pdnEntityRedundancy |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | TEXTUAL-CONVENTION |
Type Definitions (4)
| PdnRedunAlarmStatus | Bits |
noAlarm(0)linkDefect(1)hwFailure(2)hwMissing(3)hwIncompatible(4)fwIncompatible(5)cfgIncompatible(6) |
| PdnRedunCmd | Enumeration |
noCmd(1)switch(2)forcedswitch(3) |
| PdnRedunGeneralAlarmStatus | Bits |
noAlarm(0)noActiveModule(1)standbyAlarmOrReset(2) |
| PdnRedunStates | Enumeration |
activeState(1)activeAlarmState(2)standbyState(3)standbyAlarmState(4) |
Objects (19)
|
|
.1.3.6.1.4.1.1795.2.24.2.41.1 |
|
|
|
.1.3.6.1.4.1.1795.2.24.2.41.1.1 |
|
|
|
Enumeration | .1.3.6.1.4.1.1795.2.24.2.41.1.1.1 |
|
|
Enumeration | .1.3.6.1.4.1.1795.2.24.2.41.1.1.2 |
|
|
PdnRedunGeneralAlarmStatus | .1.3.6.1.4.1.1795.2.24.2.41.1.1.3 |
|
|
.1.3.6.1.4.1.1795.2.24.2.41.1.1.4 |
|
|
|
ENTITY-MIBentPhysicalIndex | .1.3.6.1.4.1.1795.2.24.2.41.1.1.4.1 |
|
|
PdnRedunCmd | .1.3.6.1.4.1.1795.2.24.2.41.1.1.4.1.1 |
|
|
.1.3.6.1.4.1.1795.2.24.2.41.1.1.5 |
|
|
|
ENTITY-MIBentPhysicalIndex | .1.3.6.1.4.1.1795.2.24.2.41.1.1.5.1 |
|
|
PdnRedunStates | .1.3.6.1.4.1.1795.2.24.2.41.1.1.5.1.1 |
|
|
PdnRedunAlarmStatus | .1.3.6.1.4.1.1795.2.24.2.41.1.1.5.1.2 |
|
|
PdnRedunAlarmStatus | .1.3.6.1.4.1.1795.2.24.2.41.1.1.5.1.3 |
|
|
PdnRedunGeneralAlarmStatus | .1.3.6.1.4.1.1795.2.24.2.41.1.1.6 |
|
|
.1.3.6.1.4.1.1795.2.24.2.41.1.2 |
|
|
|
.1.3.6.1.4.1.1795.2.24.2.41.1.2.0 |
|
|
|
.1.3.6.1.4.1.1795.2.24.2.41.1.3 |
|
|
|
.1.3.6.1.4.1.1795.2.24.2.41.1.3.1 |
|
|
|
.1.3.6.1.4.1.1795.2.24.2.41.1.3.2 |
Notifications / Traps (8)
| Name | OID | Description |
|---|---|---|
|
|
.1.3.6.1.4.1.1795.2.24.2.41.1.2.0.1 |
This notification will be issued when no module is in the Active State. |
|
|
.1.3.6.1.4.1.1795.2.24.2.41.1.2.0.2 |
This notification will be issued when the modules in a redundancy configuration present hardware incompatibilities. |
|
|
.1.3.6.1.4.1.1795.2.24.2.41.1.2.0.3 |
This notification will be issued when one of the modules configured for redundancy is either in the Standby/Alarm or Reset Test state. |
|
|
.1.3.6.1.4.1.1795.2.24.2.41.1.2.0.4 |
This notification will be issued when the modules in a redundancy configuration present firmware incompatibilities. |
|
|
.1.3.6.1.4.1.1795.2.24.2.41.1.2.0.5 |
This notification will be issued when the modules in a redundancy configuration present configuration incompatibilities. |
|
|
.1.3.6.1.4.1.1795.2.24.2.41.1.2.0.6 |
This notification will be issued when a module in a redundancy configuration has a link condition. |
|
|
.1.3.6.1.4.1.1795.2.24.2.41.1.2.0.7 |
This notification will be issued when a module in a redundancy configuration has a hardware failure condition. |
|
|
.1.3.6.1.4.1.1795.2.24.2.41.1.2.0.8 |
This notification will be issued when a module in a redundancy configuration is expecting a piece of hw to be used for redundancy which can not be found or is not operational. |