PDN-CONTROL-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
6
Rows
6
Columns
51
devControlTestTable
table.1.3.6.1.4.1.1795.2.24.2.10.2
·
1 row entry
·
3 columns
A list of Device tests that may be run.
The device Test Table.
Indexes
devControlTest
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
devControlTest
An index into the test table that indicates which test
the row involves. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.1795.2.24.2.10.2.1.1 |
||||
|
devControlTestStatus
The test status on the device. This object indicates whether
the indexed test is currently active(1) or inactive(2). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.1795.2.24.2.10.2.1.2 |
||||
|
devControlTestCmd
Used to start or stop the indexed test.
When read, the value returned will be the next logical command. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.1795.2.24.2.10.2.1.3 |
devControlDownLoadTable
table.1.3.6.1.4.1.1795.2.24.2.10.3
·
1 row entry
·
4 columns
A list of the current Download Releases and their associated status. Each Download Release will be indexed by a number from 1 to N. The user will be able to view the Download Release String and Operational Status of the release (valid or invalid) and activate a valid Download Release by changing the Administration Status to active.
The Device DownLoad Release entry.
Indexes
devControlDownLoadIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
devControlDownLoadIndex
This object is used to index the download table (range 1 to N).
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1795.2.24.2.10.3.1.1 |
||||
|
devControlDownLoadRelease
This object indicates the Software Release for
this Download. If the Software Download is Operational Status is invalid, the Software Revision Number will be blank. |
OctetString Constraints: range: 1-16 |
.1.3.6.1.4.1.1795.2.24.2.10.3.1.2 |
||||
|
devControlDownLoadOperStatus
This object indicates whether or not the indexed
download entry contains a valid(1) or invalid(2) download. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.1795.2.24.2.10.3.1.3 |
||||
|
devControlDownLoadAdminStatus
This object indicates whether or not the indexed
download entry is active(1) or inactive(2). Writing active(1) will activate that software release and cause the unit to reset (response may timeout). Writing active(1) … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.1795.2.24.2.10.3.1.4 |
devSNSwitchFirmwareTable
table.1.3.6.1.4.1.1795.2.24.2.10.5
·
1 row entry
·
2 columns
A list of objects needed to switch bank and reset the Service Node (ASN).
The Service Node Switch Firmware table.
Indexes
devSNSwitchFirmwareIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
devSNSwitchFirmwareIndex
An index into the Service Node switch firmware table that
indicates which interface the row involves. This index corresponds to the entityPhysicalIndex of the entity MIB |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1795.2.24.2.10.5.1.1 |
||||
|
devSNSwitchFirmwareBank
Writing the value switch(2) to this object will
switch the banks to change the firmware being used on the service node. The firmware from the stand by (not active) bank will be used as the currently running firmware. T… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.1795.2.24.2.10.5.1.2 |
devFileXferConfigTable
table.1.3.6.1.4.1.1795.2.24.2.10.7.1
·
1 row entry
·
17 columns
The Paradyne FileXfer Client Config Table.
Use of the File Tranfer MIB could be used with other MIBS in
the following manner:
a) Use another MIB/means to verify available space /make room
for a file to be transfered to this device
b) Use this MIB …
the following manner:
a) Use another MIB/means to verify available space /make room
for a file to be transfered to this device
b) Use this MIB …
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
devFileXferFileName
This object contains the name of the filetransfer file.
|
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.1795.2.24.2.10.7.1.1.1 |
||||||||||||
|
devFileXferCopyProtocol
The transfer protocol that should be used to copy the file
across the network. If the file transfer is to occur locally on the SNMP agent, the method of transfer is left upto the implementation, and is not restricted … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.1795.2.24.2.10.7.1.1.2 |
||||||||||||
|
devFileXferFileType
Specifies the type of file your want to transfer.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.1795.2.24.2.10.7.1.1.3 |
||||||||||||
|
devFileXferServerIpAddress
This object contains the file transfer server's IP address.
|
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.1795.2.24.2.10.7.1.1.4 |
||||||||||||
|
devFileXferUserName
This object contains the username if a username is needed
to login to the server. |
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.1795.2.24.2.10.7.1.1.5 |
||||||||||||
|
devFileXferUserPassword
This object contains the password if a password is needed
to login to the server. This object will return null on a read operation. |
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.1795.2.24.2.10.7.1.1.6 |
||||||||||||
|
devFileXferOperation
This object contains the operation the file transfer wants to
perform. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.1795.2.24.2.10.7.1.1.7 |
||||||||||||
|
devFileXferPktsSent
This object contains the the number of packets sent to the
server at the time of interrogation. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1795.2.24.2.10.7.1.1.8 |
||||||||||||
|
devFileXferPktsRecv
This object contains the the number of packets received from the
server at the time of interrogation. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1795.2.24.2.10.7.1.1.9 |
||||||||||||
|
devFileXferOctetsSent
This object contains the the number of octets sent to the
server at the time of interrogation. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1795.2.24.2.10.7.1.1.10 |
||||||||||||
|
devFileXferOctetsRecv
This object contains the the number of octets received from the
server at the time of interrogation. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1795.2.24.2.10.7.1.1.11 |
||||||||||||
|
devFileXferOwnerString
The entity which currently has the 'ownership'
required to invoke the operation on this index. |
OctetStringr/w Constraints: range: 0-255 |
.1.3.6.1.4.1.1795.2.24.2.10.7.1.1.12 |
||||||||||||
|
devFileXferStatus
This object contains the status of the file transfer.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.1795.2.24.2.10.7.1.1.13 |
||||||||||||
|
devFileXferErrorStatus
This object contains the reason code of the failure determined in
devFileXferStatus. The reason code are specific to the file transfer protocol. Please refer to the file transfer protocols respective RFC… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1795.2.24.2.10.7.1.1.14 |
||||||||||||
|
devFileXferSendEvent
This object indicates whether or not to send the
devFileXferEvent event trap . |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.1795.2.24.2.10.7.1.1.15 |
||||||||||||
|
devFileXferRowStatus
This object is used to create
a new row or delete an existing row in this table. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.1795.2.24.2.10.7.1.1.16 |
||||||||||||
|
devFileXferXferTime
This object indicates the elapsed time
(in hundredths of a second) of the file transfer. |
SNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1795.2.24.2.10.7.1.1.17 |
pdnDevFileXferTable
table.1.3.6.1.4.1.1795.2.24.2.10.7.2
·
1 row entry
·
21 columns
The Paradyne FileXfer Image Client Config Table accessed by session id.
Use of the File Tranfer MIB could be used with other MIBS in
the following manner:
a) Use another MIB/means to verify available space /make room
for a file to be transfered to this device
b) Use this MIB …
the following manner:
a) Use another MIB/means to verify available space /make room
for a file to be transfered to this device
b) Use this MIB …
Indexes
pdnDevFileXferSessionID
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
pdnDevFileXferSessionID
This object is the session id. This object is used
by FileXfer Table to identify the row of this table. When creating the new row in the table the value of this object may be obtained by retreiving the value of pdnDev… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.1 |
||||||||||||
|
pdnDevFileXferifIndex
This object specifies the interface
number that corresponds to RFC1213. It this object is not used the value of this object should be zero. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.2 |
||||||||||||
|
pdnDevFileXferFileName
This object contains the name of the filetransfer file.
|
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.3 |
||||||||||||
|
pdnDevFileXferCopyProtocol
The transfer protocol that should be used to copy the file
across the network. If the file transfer is to occur locally on the SNMP agent, the method of transfer is left upto the implementation, and is not restricted … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.4 |
||||||||||||
|
pdnDevFileXferFileType
Specifies the type of file your want to transfer.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.5 |
||||||||||||
|
pdnDevFileXferServerIpAddress
This object contains the file transfer server's IP address.
|
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.6 |
||||||||||||
|
pdnDevFileXferUserName
This object contains the username if a username is needed
to login to the server. |
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.7 |
||||||||||||
|
pdnDevFileXferUserPassword
This object contains the password if a password is needed
to login to the server. This object will return null on a read operation. |
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.8 |
||||||||||||
|
pdnDevFileXferUserAccount
This object contains the name of the the user account information
that is stored on ftp server. Server would contain user name and password under this account name. This object will return null on a read operation. Th… |
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.9 |
||||||||||||
|
pdnDevFileXferOperation
This object contains the operation the file transfer wants to
perform. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.10 |
||||||||||||
|
pdnDevFileXferPktsSent
This object contains the the number of packets sent to the
server at the time of interrogation. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.11 |
||||||||||||
|
pdnDevFileXferPktsRecv
This object contains the the number of packets received from the
server at the time of interrogation. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.12 |
||||||||||||
|
pdnDevFileXferOctetsSent
This object contains the the number of octets sent to the
server at the time of interrogation. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.13 |
||||||||||||
|
pdnDevFileXferOctetsRecv
This object contains the the number of octets received from the
server at the time of interrogation. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.14 |
||||||||||||
|
pdnDevFileXferOwnerString
The entity which currently has the 'ownership'
required to invoke the operation on this index. |
OctetStringr/w Constraints: range: 0-255 |
.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.15 |
||||||||||||
|
pdnDevFileXferStatus
This object contains the status of the file transfer.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.16 |
||||||||||||
|
pdnDevFileXferApply
This object is configured to specify if the
firmware download will be applied immediatley after file transfer or not. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.17 |
||||||||||||
|
pdnDevFileXferErrorStatus
This object contains the reason code of the failure determined in
devFileXferStatus. The reason code are specific to the file transfer protocol. Please refer to the file transfer protocols respective RFC for clarifica… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.18 |
||||||||||||
|
pdnDevFileXferSendEvent
This object indicates whether or not to send the
pdnDevFileXferEvent event trap . |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.19 |
||||||||||||
|
pdnDevFileXferXferTime
This object indicates the elapsed time
(in hundredths of a second) of the file transfer. |
SNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.20 |
||||||||||||
|
pdnDevFileXferRowStatus
This object is used to create
a new row or delete an existing row in this table. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.21 |
devFirmwareControlTable
table.1.3.6.1.4.1.1795.2.24.2.10.9.1
·
1 row entry
·
4 columns
A list of the current Firmware Releases and their associated
status. Each Firmware Release will be indexed by a number
from 1 to N. The user will be able to view the Firmware
Release String and Operational Status of the release (valid
or invalid) and activate a valid Firmware Release by changing
the Administration Status to active.
The Device Firmware Release entry.
Indexes
devFirmwareControlIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
devFirmwareControlIndex
This object is used to index the Firmware table (range 1 to N).
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1795.2.24.2.10.9.1.1.1 |
||||||
|
devFirmwareControlRelease
This object indicates the Software Release for
this Firmware. If the Software Firmware is Operational Status is invalid, the Software Revision Number will be blank. |
OctetString Constraints: range: 1-16 |
.1.3.6.1.4.1.1795.2.24.2.10.9.1.1.2 |
||||||
|
devFirmwareControlOperStatus
This object indicates whether or not the indexed
Firmware entry contains a valid(1) or invalid(2) Firmware. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.1795.2.24.2.10.9.1.1.3 |
||||||
|
devFirmwareControlAdminStatus
This object indicates whether or not the indexed
Firmware entry is active(1) or inactive(2). Writing active(1) will activate that software release and cause the unit to reset (response may timeout). Writing active(1) to… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.1795.2.24.2.10.9.1.1.4 |