PDN-ADSL-SELT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
13

pdnAdslSeltTable

table
.1.3.6.1.4.1.1795.2.24.2.6.31.1.2 · 1 row entry · 5 columns
Open in standard view 
This table allows initiation/termination of 
SELT Tests.
pdnAdslSeltEntry entry .1.3.6.1.4.1.1795.2.24.2.6.31.1.2.1
Each entry represents an instance of a SELT test
currently running or ever run (since last system reset)
on an ADSL interface.

There should be entries in this table for every
active running tests and test …
Indexes
IF-MIBifIndex pdnAdslSeltType
Column Syntax OID
pdnAdslSeltType
This object is used to specify the SELT test type
that will be initiated.

If a SELT Test is already running on the ADSL interface,
writing to this object is prohibited by the agent until
the previous test…
PdnSeltTypes
Textual Convention: PdnSeltTypes Enumeration
Type Values:
1loopCharacterization
2loopNoiseFloor
 .1.3.6.1.4.1.1795.2.24.2.6.31.1.2.1.1
pdnAdslSeltCmd
This object corresponds to the list of test operations
that can be performed.

The possible values are noOp(1), start(2), stop(3), or
clearResults(4).

Reading this object will always retu…
Enumerationr/w
Enumerated Values:
1noOp
2start
3stop
4clearResults
 .1.3.6.1.4.1.1795.2.24.2.6.31.1.2.1.2
pdnAdslSeltStatus
This object provides status about any SELT test
running or ever run (since last reset) on an ADSL
interface. This object can be read by NMS managers
to determine the status of a test; that is:

inProgress…
Enumeration
Enumerated Values:
1inProgress
2stoppedInProgress
3complete
4notStarted
5resultsCleared
 .1.3.6.1.4.1.1795.2.24.2.6.31.1.2.1.3
pdnAdslSeltDuration
This object provides the approximate time in Seconds that
the SELT test measurement will take.

This object should return 0 if no test is actively
running on the ADSL interface specified.
secondsSNMPv2-SMIUnsigned32r/w
Constraints:
range: 0-16
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.31.1.2.1.4
pdnAdslSeltTimeLeft
This object provides the approximate time left in Seconds
for the test running on this ADSL interface.

This object should return 0 if no test is actively
running on the ADSL interface specified.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.31.1.2.1.5

pdnAdslSeltLcTable

table
.1.3.6.1.4.1.1795.2.24.2.6.31.1.3 · 1 row entry · 4 columns
Open in standard view 
This table post results for loop
characterization tests completed.
pdnAdslSeltLcEntry entry .1.3.6.1.4.1.1795.2.24.2.6.31.1.3.1
Each entry represents the results of a loop
characterization test performed over an ADSL interface.
Indexes
IF-MIBifIndex pdnAdslSeltLcSegmentIndex
Column Syntax OID
pdnAdslSeltLcSegmentIndex
This object indicates the index of the segment being reported.
From no segments to a possible of 10 segments could be
identified in the loop topology.
Integer32
Constraints:
range: 0-9
range: 0-18
 .1.3.6.1.4.1.1795.2.24.2.6.31.1.3.1.1
pdnAdslSeltLcSegmentLength
This object indicates an estimate of the segment Length
being reported
Integer32
Constraints:
range: 0-65534
 .1.3.6.1.4.1.1795.2.24.2.6.31.1.3.1.2
pdnAdslSeltLcSegmentGauge
This object indicates the estimated Gauge of the segment
being reported. The gauge reported back is based on the
pdnAdslSeltWireSizeWireSize configuration parameter passed
when the test is started.
Enumeration
Enumerated Values:
1unknown
2awg26
3awg24
4awg22
5awg19
10metric32
11metric40
12metric50
13metric63
14metric90
20metricJapan32
21metricJapan40
22metricJapan50
23metricJapan65
24metricJapan90
 .1.3.6.1.4.1.1795.2.24.2.6.31.1.3.1.3
pdnAdslSeltLcSegmentType
This object indicates the segment type being reported.
Enumeration
Enumerated Values:
1notPresent
2inline
3bridgeTap
 .1.3.6.1.4.1.1795.2.24.2.6.31.1.3.1.4

pdnAdslSeltLnfTable

table
.1.3.6.1.4.1.1795.2.24.2.6.31.1.4 · 1 row entry · 4 columns
Open in standard view 
This table post results for loop
noise floor tests completed.
pdnAdslSeltLnfEntry entry .1.3.6.1.4.1.1795.2.24.2.6.31.1.4.1
Each entry represents the results of a Loop
Noise Floor test performed over an ADSL interface.
Indexes
IF-MIBifIndex pdnAdslSeltLnfSubCarrierIndex
Column Syntax OID
pdnAdslSeltLnfSubCarrierIndex
Identifies a row in the table based on a subcarrier.
The subcarrier index ranges from 0 to NSCus-1
(NSC is Number of Subcarriers) as specified in G.997.1
where NSCus is the higher subcarrier that can be transmitted
in…
Integer32
Constraints:
range: 0-63
range: 0-32
 .1.3.6.1.4.1.1795.2.24.2.6.31.1.4.1.1
pdnAdslSeltLnfPeakPsd
This object indicates the peak Psd of the tone indicated by
the sub-carrier index.

The value returned by the agent for this object is
expressed in units of 1/256 dBm.
Integer32
Constraints:
range: 0-65534
 .1.3.6.1.4.1.1795.2.24.2.6.31.1.4.1.2
pdnAdslSeltLnfTotalPsd
This object indicates the total Psd of the tone indicated by
the sub-carrier index.

The value returned by the agent for this object is
expressed in units of 1/256 dBm.
Integer32
Constraints:
range: 0-65534
range: 14-14
 .1.3.6.1.4.1.1795.2.24.2.6.31.1.4.1.3
pdnAdslSeltLnfSignalPsd
This object indicates the signal Psd of the tone indicated by
the sub-carrier index.

The value returned by the agent for this object is
expressed in units of 1/256 dBm.
Integer32
Constraints:
range: 0-65534
range: 0-32
 .1.3.6.1.4.1.1795.2.24.2.6.31.1.4.1.4