OSA-TWAMP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
24

osaTwampResponderTable

table
.1.3.6.1.4.1.2544.8.2 · 1 row entry · 13 columns
Open in standard view 
This table contains TWAMP Responders.
osaTwampResponderEntry entry .1.3.6.1.4.1.2544.8.2.1
Contains an entry of the table.
Indexes
osaTwampResponderIndex
Column Syntax OID
osaTwampResponderIndex
An integer index used to uniquely identify a TWAMP Responder.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.2544.8.2.1.1
osaTwampResponderAlias
An alias associated with the TWAMP Responder.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2544.8.2.1.2
osaTwampResponderControlMode
Responder control mode. When ControlMode is set to
ControlDisabled - TWAMP Light Mode is used.
Enumerationr/w
Enumerated Values:
1controlDisabled
2controlEnabled
 .1.3.6.1.4.1.2544.8.2.1.3
osaTwampResponderIdleTimeout
When a TWAMP Test packet Is not received for this timeout period the
TWAMP Session will go to IDLE state where Aging timer is started. This
time is specified in seconds.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.8.2.1.4
osaTwampResponderAgingTimeout
After a Session goes into IDLE state this timer with this timeout
is started and on expiry the Session will terminate. This
time is specified in seconds.
Unsigned32r/w
Constraints:
range: 1-9000
 .1.3.6.1.4.1.2544.8.2.1.5
osaTwampResponderVlanTag
This is the outer VLAN ID of the received TWAMP test packets.
r/w .1.3.6.1.4.1.2544.8.2.1.6
osaTwampResponderSourceIpAddress
IPv4/IPv6 Address of the local Responder interface.
OctetStringr/w
Constraints:
range: 8-48
 .1.3.6.1.4.1.2544.8.2.1.7
osaTwampResponderRemoteClientIpAddress
IPv4/IPv6 Address of the remote client sender.
OctetStringr/w
Constraints:
range: 8-48
 .1.3.6.1.4.1.2544.8.2.1.8
osaTwampResponderSourceUdpPort
This is the UDP Port of the local Responder.
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2544.8.2.1.9
osaTwampResponderRemoteClientUdpPort
This is the UDP Port of the remote client. This UDP port
is used by the TWAMP sender as the source udp port
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2544.8.2.1.10
osaTwampResponderSequenceAction
Sequence number action clearSequenceNumber will reset the
reflector sequence numbering.
Enumerationr/w
Enumerated Values:
1noAction
2clearSequenceNumber
 .1.3.6.1.4.1.2544.8.2.1.11
osaTwampResponderState
This is the state describing the reflector status
Enumeration
Enumerated Values:
1init
2testReady
3waitingForTransitTimeout
4end
 .1.3.6.1.4.1.2544.8.2.1.12
osaTwampResponderRowStatus
The status of this row, by which new entries may be
created, or old entries deleted from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2544.8.2.1.13

osaTwampResponderSessionTable

table
.1.3.6.1.4.1.2544.8.3 · 1 row entry · 11 columns
Open in standard view 
This table contains TWAMP dynamic sessions related to specific responder.
osaTwampResponderSessionEntry entry .1.3.6.1.4.1.2544.8.3.1
Contains an entry of the table.
Indexes
osaTwampResponderServerIndex osaTwampResponderSessionIndex
Column Syntax OID
osaTwampResponderServerIndex
An integer index used to uniquely identify a TWAMP Responder.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.2544.8.3.1.1
osaTwampResponderSessionIndex
An integer index used to uniquely identify a TWAMP session.
Integer32
Constraints:
range: 1-500
 .1.3.6.1.4.1.2544.8.3.1.2
osaTwampResponderSessionIdleTimeout
When a TWAMP Test packet Is not received for this timeout period the
TWAMP Session will go to IDLE state where Aging timer is started. This
time is specified in seconds.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.8.3.1.3
osaTwampResponderSessionAgingTimeout
After a Session goes into IDLE state this timer with this timeout
is started and on expiry the Session will terminate. This
time is specified in seconds.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.8.3.1.4
osaTwampResponderSessionVlanTag
This is the outer VLAN ID of the received TWAMP test packets.
.1.3.6.1.4.1.2544.8.3.1.5
osaTwampResponderSessionSourceIpAddress
IPv4/IPv6 Address of the local Responder interface.
OctetString
Constraints:
range: 8-48
 .1.3.6.1.4.1.2544.8.3.1.6
osaTwampResponderSessionRemoteClientIpAddress
IPv4/IPv6 Address of the remote client sender.
OctetString
Constraints:
range: 8-48
 .1.3.6.1.4.1.2544.8.3.1.7
osaTwampResponderSessionSourceUdpPort
This is the UDP Port of the local Responder.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2544.8.3.1.8
osaTwampResponderSessionRemoteClientUdpPort
This is the UDP Port of the remote client. This UDP port
is used by the TWAMP sender as the source udp port
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2544.8.3.1.9
osaTwampResponderSessionSequenceNumber
Sequence number is the sequence number of the test packet
according to its transmit order.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.8.3.1.10
osaTwampResponderSessionState
This is the state describing the session status
Enumeration
Enumerated Values:
1init
2testInProgress
3idle
 .1.3.6.1.4.1.2544.8.3.1.11