OPTIX-TUNNEL-OAM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
16

optixTunnelOamTable

table
.1.3.6.1.4.1.2011.2.25.4.50.10.1.2 · 1 row entry · 11 columns
Open in standard view 
This table is used to configuretunnel OAM attributes, includingthe tunnel OAM enable status, detection mode, CC detection mode, SD/SF thresholds, and query the OAM status.
optixTunnelOamEntry entry .1.3.6.1.4.1.2011.2.25.4.50.10.1.2.1
This entry is used to manage tunnel OAM attributes and status.
Indexes
optixTunnelOamIndex
Column Syntax OID
optixTunnelOamIndex
This object indicates the tunnel OAM index, ranging from 1 to 0x00ffffff.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.10.1.2.1.1
optixTunnelOamEnable
This object indicates whether the OAM is enabled. 1: enable 0: disable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.10.1.2.1.2
optixTunnelOamCheckWay
This object indicates the OAM detection mode. 1: self 2: manu 255: invalid detection mode This parameter is unconfigurable when the tunnel is a unidirectional ingress tunnel.The queried value is invalid.
Enumerationr/w
Enumerated Values:
1self
2manu
255invalid
 .1.3.6.1.4.1.2011.2.25.4.50.10.1.2.1.3
optixTunnelOamCcType
This object indicates the CC detection packet type. 1: cv (default value) 2: ffd
Enumerationr/w
Enumerated Values:
1cv
2ffd
 .1.3.6.1.4.1.2011.2.25.4.50.10.1.2.1.4
optixTunnelOamCcTime
This object indicates the CC detection packet frequency. When the packet type is cv, the frequency is an invalid value, 0xff. When the packet type is ffd, the valid value of the frequency is as follows: 1: 3.3 ms 2: 10 …
Unsigned32r/w
Constraints:
range: 1-7
range: 255-255
 .1.3.6.1.4.1.2011.2.25.4.50.10.1.2.1.5
optixTunnelOamCcSend
This object indicates the CC start/stop status. 0: disable1: enable 255: invalid This parameter is unconfigurable when the tunnel is a unidirectional egress node. The quried value is invalid.
Enumerationr/w
Enumerated Values:
0disable
1enable
255invalid
 .1.3.6.1.4.1.2011.2.25.4.50.10.1.2.1.6
optixTunnelOamSf
This object indicates the SF threshold (packet loss rate). Valid values range from 0 to 100.
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.2.25.4.50.10.1.2.1.7
optixTunnelOamSd
This object indicates the SD threshold (packet loss rate). Valid values range from 0 to 100.
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.2.25.4.50.10.1.2.1.8
optixTunnelOamRevTunnelindex
This object indicates the reverse tunnel index. This parameter is applicable to only when the tunnel serves as an egress node. When the value is 0xffffffff, the reverse tunnel index is not configured.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.10.1.2.1.9
optixTunnelOamStandard
This object indicates the OAM protocol standard  1: 1711 2: 1731
Enumerationr/w
Enumerated Values:
1y1711
2y1731
 .1.3.6.1.4.1.2011.2.25.4.50.10.1.2.1.10
optixTunnelOamRowStatus
This object indicates the row status. 1: active 6: destroy,destroy indicates clearing the instance's configure.createAndGo is not supported
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.2.25.4.50.10.1.2.1.255

optixTunnelOamStateTable

table
.1.3.6.1.4.1.2011.2.25.4.50.10.1.3 · 1 row entry · 5 columns
Open in standard view 
This table is used to query thetunnel OAM status.
optixTunnelOamStateEntry entry .1.3.6.1.4.1.2011.2.25.4.50.10.1.3.1
This entry is used tomanage the tunnel OAM status.
Indexes
optixTunnelOamIndex optixTunnelOamDirection
Column Syntax OID
optixTunnelOamDirection
For bidirectional tunnels, the status query is performaned in two directions, local and remote ends. This object indicates the direction of thetunnel OAM, localor remote end. For unidirectional ingress tunnels, only the…
Enumeration
Enumerated Values:
0farend
1nearend
 .1.3.6.1.4.1.2011.2.25.4.50.10.1.3.1.1
optixTunnelOamState
This object indicates the tunnel OAM status. 0: initialstate, 1: nearendavailable, 2: nearenddefectavailable, 3: nearenddefectunavailable, 4: nearendunavailable, 5: farendavailable, 6: farenddefectavailable, 7: farendde…
Enumeration
Enumerated Values:
0initialstate
1nearendavailable
2nearenddefectavailable
3nearenddefectunavailable
4nearendunavailable
5farendavailable
6farenddefectavailable
7farenddefectunavailable
8farendunavailable
 .1.3.6.1.4.1.2011.2.25.4.50.10.1.3.1.2
optixTunnelOamDefectType
This object indicates the defect type of the tunnel OAM. 1: dserver, 2: dpeerme, 3: dlocv, 4: dttsimismatch, 5: dttsimismerge, 6: dexcess, 7: dunknown, 255: invalid
Enumeration
Enumerated Values:
1dserver
2dpeerme
3dlocv
4dttsimismatch
5dttsimismerge
6dexcess
7dunknown
255invalid
 .1.3.6.1.4.1.2011.2.25.4.50.10.1.3.1.3
optixTunnelOamUnavailableTime
This object indicates the unavailable time of the tunnel. The time ranges from 0 to 300,000 ms. 4294967295: invalid
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.10.1.3.1.4
optixTunnelOamDefectPosition
This object indicates the position of the tunnel defect: a node identified by IP address.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.10.1.3.1.5