OPTIX-TUNNEL-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
3
Rows
3
Columns
62
optixStaticUcTunnelTable
table.1.3.6.1.4.1.2011.2.25.4.50.9.1.7
·
1 row entry
·
37 columns
This table is used to configure and manage the static unicast MPLS tunnels. The tunnel must be configured on each node along the tunnel.
This entry indicates the parameter table for static unicast tunnels.
Indexes
optixStcUcTnlIndex
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
optixStcUcTnlIndex
This object indicates the tunnel index, ranging from 1 to 0x00ffffff,0 means auto.
|
Unsigned32 Constraints: range: 1-16777215 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.1 |
||||||||||||||||||
|
optixStcUcTnlPosition
This object indicates the tunnel node location. 1: ingress 2: transit 3: egress
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.2 |
||||||||||||||||||
|
optixStcUcTnldirection
This object indicates the tunnel direction. 0: uni 1: bi
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.3 |
||||||||||||||||||
|
optixStcUcTnlIngressId
This object indicates the source node ID, which is an unicast address but not a multicast/broadcast/network address/ NE address/loopback address/reserved address. If the values of them are all 0, this node ID is the nod…
|
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.4 |
||||||||||||||||||
|
optixStcUcTnlEgressId
This object indicates the sink node ID, which is an unicast address but not a multicast/broadcast/network address/ NE address/loopback address/reserved address. If the values of them are all 0, this node ID is the node …
|
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.5 |
||||||||||||||||||
|
optixStcUcTnlTunnelId
This object indicates the tunnel ID, ranging from 1 to 0xffff.
|
Unsigned32r/w Constraints: range: 1-65535 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.6 |
||||||||||||||||||
|
optixStcUcTnlInBid
This object indicates the input slot ID.
|
Unsigned32r/w Constraints: range: 1-65535 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.7 |
||||||||||||||||||
|
optixStcUcTnlInSubBid
This object indicates the input subboard ID. If no subboard is available, the value is 255.
|
Unsigned32r/w Constraints: range: 1-255 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.8 |
||||||||||||||||||
|
optixStcUcTnlInPortId
This object indicates the input port number.
|
Unsigned32r/w Constraints: range: 1-65535 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.9 |
||||||||||||||||||
|
optixStcUcTnlInLabel
This object indicates the forward ingress label. The corresponding spacecannot exceed that of the unicast label.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.10 |
||||||||||||||||||
|
optixStcUcTnlOutBid
This object indicates the output slot ID.
|
Unsigned32r/w Constraints: range: 1-65535 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.11 |
||||||||||||||||||
|
optixStcUcTnlOutSubBid
This object indicates the output subboard ID. If no subboard is available, the value is 255.
|
Unsigned32r/w Constraints: range: 1-255 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.12 |
||||||||||||||||||
|
optixStcUcTnlOutPortId
This object indicates the output port number.
|
Unsigned32r/w Constraints: range: 1-65535 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.13 |
||||||||||||||||||
|
optixStcUcTnlOutLabel
This object indicates the forward egress label.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.14 |
||||||||||||||||||
|
optixStcUcTnlNextHop
This object indicates the forward next hop address, which is an unicast address, but not a multicast/broadcast/0.0.0.0 address/loopback address/reserved address.
|
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.15 |
||||||||||||||||||
|
optixStcUcTnlRsvInLabel
This object indicates the backward ingress label. The corresponding space cannot exceed that of the unicast label.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.16 |
||||||||||||||||||
|
optixStcUcTnlRsvOutLabel
This object indicates the backward egress label.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.17 |
||||||||||||||||||
|
optixStcUcTnlRsvNextHop
This object indicates the backward next hop address, which is an unicast address, but not a multicast/broadcast/0.0.0.0 address/loopback address/reserved address.
|
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.18 |
||||||||||||||||||
|
optixStcUcTnlName
This object indicates the tunnel name. The tunnel name can be null, space, or chinese characters of a maximum of 64 bytes.
|
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.19 |
||||||||||||||||||
|
optixStcUcTnlBandwidthCIR
Indicates the CIR. 0: The bandwidth is not restricted.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.20 |
||||||||||||||||||
|
optixStcUcTnlBandwidthCBS
Indicates the CBS. 0: The bandwidth is not restricted.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.21 |
||||||||||||||||||
|
optixStcUcTnlBandwidthPIR
Indicates the PIR. 0: The bandwidth is not restricted.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.22 |
||||||||||||||||||
|
optixStcUcTnlBandwidthPBS
Indicates the PBS. 0: The bandwidth is not restricted.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.23 |
||||||||||||||||||
|
optixStcUcTnlDsType
This object indicates the tunnel schedualing type.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.24 |
||||||||||||||||||
|
optixStcUcTnlDsCos
This object indicates the tunnel COS value:1:be 2:af1 3:af2 4:af3 5:af4 6:ef 7:cs6 8:cs7 255:null
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.25 |
||||||||||||||||||
|
optixStcUcTnlExp
This object indicates the tunnel EXP value.
|
Unsigned32r/w Constraints: range: 255-255range: 0-7 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.26 |
||||||||||||||||||
|
optixStcUcTnlLspMode
This object indicates the LSP mode. 1: uniform 2: pipe
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.27 |
||||||||||||||||||
|
optixStcUcTnlEnable
Indicates whether an LSP is enabled. 1: enable 0: disable
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.28 |
||||||||||||||||||
|
optixStcUcTnlVlanId
This object indicates the VLAN ID. Valid values: 1-4094, 0xffff.
|
Unsigned32r/w Constraints: range: 65535-65535range: 1-4094 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.29 |
||||||||||||||||||
|
optixStcUcTnlVlanpri
This object indicates the VLAN priority. Valid values: 0xff
|
Unsigned32r/w Constraints: range: 255-255 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.30 |
||||||||||||||||||
|
optixStcUcTnlState
This object indicates the tunnel status. 0: up 1: down 2: fail (The tunnel cannot be created.)
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.31 |
||||||||||||||||||
|
optixStcUcTnlBwLimit
This object indicates the tunnel bandwidth limit state. 0:disabel 1:enable
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.32 |
||||||||||||||||||
|
optixStcUcTnlCheckRet
This object indicates the check result of tunnels.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.33 |
||||||||||||||||||
|
optixStcUcTnlCT
This object indicates the CT of tunnels.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.34 |
||||||||||||||||||
|
optixStcUcTnlSetupPri
This object indicates the setup priority of tunnels.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.35 |
||||||||||||||||||
|
optixStcUcTnlHoldPri
This object indicates the hold priority of tunnels.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.36 |
||||||||||||||||||
|
optixStcUcTnlRowStatus
This object indicates the row status. 1: active 4: createAndGo 6: destroy
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.255 |
optixTunnelCrossTable
table.1.3.6.1.4.1.2011.2.25.4.50.9.1.8
·
1 row entry
·
15 columns
This table is used to query the actual tunnel forwarding and cross-connect paths. For bidirectional tunnels, there are forward and backward cross-connections. For unidirectional tunnels, thereare only forward cross-connections.
This entry is used to query the parameter table for actualtunnel cross-connections.
Indexes
optixTunnelIndex optixTunneldirection
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
optixTunnelIndex
This object indicates the tunnel index, ranging from 1 to 0x00ffffff.
|
Unsigned32 Constraints: range: 1-16777215 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.8.1.1 |
||||
|
optixTunneldirection
This object indicates the cross-connect direction. 1: forward 2: backward
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.2.25.4.50.9.1.8.1.2 |
||||
|
optixTnlInBid
This object indicates the input slot ID.
|
Unsigned32 Constraints: range: 1-65535 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.8.1.3 |
||||
|
optixTnlInSubBid
This object indicates the input subboard ID. If no subboard is available, the value is 255.
|
Unsigned32 Constraints: range: 1-255 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.8.1.4 |
||||
|
optixTnlInPortId
This object indicates the input port number.
|
Unsigned32 Constraints: range: 1-65535 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.8.1.5 |
||||
|
optixTnlInLabel
This object indicates the forward ingress label. The corresponding space cannot exceed that of the unicast label.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.8.1.6 |
||||
|
optixTnlOutBid
This object indicates the output slot ID.
|
Unsigned32 Constraints: range: 1-65535 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.8.1.7 |
||||
|
optixTnlOutSubBid
This object indicates the output subboard ID. If no subboard is available, the value is 255.
|
Unsigned32 Constraints: range: 1-255 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.8.1.8 |
||||
|
optixTnlOutPortId
This object indicates the output port number.
|
Unsigned32 Constraints: range: 1-65535 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.8.1.9 |
||||
|
optixTnlOutLabel
This object indicates the forward egress label.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.8.1.10 |
||||
|
optixTnlNextHop
This object indicates the forward next hop address, which is an unicast address, but not a multicast/broadcast/0.0.0.0 address/loopback address/reserved address.
|
SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.8.1.11 |
||||
|
optixTnlIngressId
This object indicates the source node ID, which is an unicast address, but not a multicast/broadcast/network address/ NE address/loopback address/reserved address. If the values of them are all 0, this node ID is the no…
|
SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.8.1.12 |
||||
|
optixTnlEgressId
This object indicates the sink node ID, which is an unicast address, but not a multicast/broadcast/network address/ NE address/loopback address/reserved address. If the values of them are all 0, this node ID is the node…
|
SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.8.1.13 |
||||
|
optixTnlTunnelId
This object indicates the tunnel ID, ranging from 1 to 0xffff.
|
Unsigned32 Constraints: range: 1-65535 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.8.1.14 |
||||
|
optixTnlInstance
This object indicates the tunnel channel instance.
|
Unsigned32 Constraints: range: 1-65535 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.8.1.15 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.9
·
1 row entry
·
10 columns
This table is used to query the number of CES services that can be configured on the free bandwidth.
This entry is used to query theinformation table for PWs carried on the tunnel.
Indexes
optixCarryCESTunnelIndex optixCarryCESType optixCarryCESLevel optixCarryCESPathNumber optixCarryCESRTPEnable optixCarryCESLoadtime optixCarryCESIsmspw optixCarryCESSohThorough optixCarryCESLoadbytes
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
optixCarryCESTunnelIndex
This object indicates the tunnel index, ranging from 1 to 0x00ffffff.
|
Unsigned32 Constraints: range: 1-16777215 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.9.1.1 |
||||||||||
|
optixCarryCESType
This object indcates the PW type. 0x0010: SONET/SDH Circuit Emulation over Packet 0x0011: Structure-agnostic E1 over Packet 0x0015: CESoPSN basic mode
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.2.25.4.50.9.1.9.1.2 |
||||||||||
|
optixCarryCESLevel
This object indicates the service emulation level. 1: VC12 2: VC3 3: VC11 4: VC4 5: VC4 (3 x VC3)
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.2.25.4.50.9.1.9.1.3 |
||||||||||
|
optixCarryCESPathNumber
This object indicates the number of timeslots/channels.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.9.1.4 |
||||||||||
|
optixCarryCESRTPEnable
This object indicates the enable status of the RTP header encapsulation. 0: disable 1: enablehwrtp 2: enablestdrtp
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.2.25.4.50.9.1.9.1.5 |
||||||||||
|
optixCarryCESLoadtime
This object indicates the packet loading time. Valid values: 125-5000 us; step: 125.For VC4/VC4 (3VC3) CES packets, the loading time is not supported. The value is 0xffff.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.9.1.6 |
||||||||||
|
optixCarryCESIsmspw
This object is used to check whether the PW is an MS-PW. 0: no 1: yes
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.2.25.4.50.9.1.9.1.7 |
||||||||||
|
optixCarryCESSohThorough
This object indicates the enabled status of the transmission of section overheads. 0: disable 1: enable (Only for VC4 CES services)
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.2.25.4.50.9.1.9.1.8 |
||||||||||
|
optixCarryCESLoadbytes
This object indicates the number of load bytes. For VC4/VC4 (3 x VC3) CES packets, the loading time is not supported. The value is 0xffff.
|
Unsigned32 Constraints: range: 65535-65535 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.9.1.9 |
||||||||||
|
optixCarryCESNumber
This object indicates the number of CES services that can be configured on the free bandwidth of the tunnel/port.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.2.25.4.50.9.1.9.1.10 |