OPTIX-SDH-OAM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
9
Rows
9
Columns
19

optixLoopTable

table
.1.3.6.1.4.1.2011.2.25.4.10.42.1.1 · 1 row entry · 1 columns
Open in standard view 
This table describes the basic port loopback configurations.
optixLoopEntry entry .1.3.6.1.4.1.2011.2.25.4.10.42.1.1.1
Thisentry describes the basic port loopback configurations.
Indexes
OPTIX-BOARD-MANAGE-MIBoptixLogBoardId OPTIX-BOARD-MANAGE-MIBoptixLogSubCardId OPTIX-PORT-MANAGE-MIBoptixPortId
Column Syntax OID
optixLoopMode
This object indicates the loopback mode of theport. 0: noloop, 1: inloop, 2: outloop
Enumerationr/w
Enumerated Values:
0noloop
1inloop
2outloop
 .1.3.6.1.4.1.2011.2.25.4.10.42.1.1.1.1

optixVC4LoopTable

table
.1.3.6.1.4.1.2011.2.25.4.10.42.1.2 · 1 row entry · 1 columns
Open in standard view 
This table describes the basic loopback configurations of the higher order path.
optixVC4LoopEntry entry .1.3.6.1.4.1.2011.2.25.4.10.42.1.2.1
Thisentry describes the basic loopback configurations of the higher order path.
Indexes
Column Syntax OID
optixVC4LoopMode
This object indicates the loopback mode of the higher order path. 0: noloop, 1: inloop, 2: outloop
Enumerationr/w
Enumerated Values:
0noloop
1inloop
2outloop
 .1.3.6.1.4.1.2011.2.25.4.10.42.1.2.1.1

optixOamLineFindTable

table
.1.3.6.1.4.1.2011.2.25.4.10.42.1.3 · 1 row entry · 9 columns
Open in standard view 
This table describes the basic configurations of fiber-searching function at the OAM port.
optixOamLineFindEntry entry .1.3.6.1.4.1.2011.2.25.4.10.42.1.3.1
Thisentry describes the basic configurations of fiber-searching function at the OAM port.
Indexes
optixOamLineFindInNeId optixOamLineFindInBid optixOamLineFindInSubCardId optixOamLineFindInPid
Column Syntax OID
optixOamLineFindInNeId
This object indicates the NE ID input for the fiber-searching. This parameter can be set to 0, indicating all fiber connections on an NE. NE IDs are used with ASON equipment. Therefore, ASON equipment can query all the …
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.42.1.3.1.1
optixOamLineFindInBid
This object indicates the slot ID input for thefiber-searching. This parameter can be set to 0. If the NE ID is 0, the value of this parameter must be 0. If the NE ID is not 0, the value 0 of this parameter indicates al…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.42.1.3.1.2
optixOamLineFindInSubCardId
This object indicates the subboard ID input for the fiber-searching. The parameter takes a fixed value of 255.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.42.1.3.1.3
optixOamLineFindInPid
This object indicates the port number input for the fiber-searching.This parameter can be set to 0. If the slot ID is 0, the value of this parameter must be 0. If the slot ID is not 0, the value 0 of this parameter indi…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.42.1.3.1.4
optixOamLineFindOutNeId
This object indicates the NE ID output after thefiber-searching.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.42.1.3.1.5
optixOamLineFindOutBid
This object indicates the slot ID output after thefiber-searching.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.42.1.3.1.6
optixOamLineFindOutSubCardId
This object indicates the subboard IDoutput after thefiber-searching.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.42.1.3.1.7
optixOamLineFindOutPid
This object indicates the port numberoutput after thefiber-searching.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.42.1.3.1.8
optixOamLineFindRowStatus
This object indicates the row the basic configurations of fiber-searching function at the OAM port.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.2.25.4.10.42.1.3.1.255

optixSdhAlm2AisTable

table
.1.3.6.1.4.1.2011.2.25.4.10.42.1.4 · 1 row entry · 2 columns
Open in standard view 
This table describes configurations of alarm management of the SDH board.
optixSdhAlm2AisEntry entry .1.3.6.1.4.1.2011.2.25.4.10.42.1.4.1
This entry describes configurations of alarm management of the SDH board.
Indexes
OPTIX-BOARD-MANAGE-MIBoptixLogBoardId OPTIX-BOARD-MANAGE-MIBoptixLogSubCardId OPTIX-PORT-MANAGE-MIBoptixPortId optixSdhAlmId
Column Syntax OID
optixSdhAlmId
This object indicates the alarm ID. 0: none, 1: rlos, 5: roof, 8: rlof, 12: b1exc, 33: msais, 34: msrdi, 35: b2exc, 36: b2sd, 66: aulop, 70: b3sd, 71: b3exc, 72: auais, 75: hpuneq, 76: hptim, 77: hpslm, 81: hplom, 87: j…
Enumeration
Enumerated Values:
0none
1rlos
5roof
8rlof
12b1exc
33msais
34msrdi
35b2exc
36b2sd
66aulop
70b3sd
71b3exc
72auais
75hpuneq
76hptim
77hpslm
81hplom
87j0mm
90lpuneq
91lptim
92lpslm
107talos
134plos
175b1sd
182bipsd
183bipexc
261linkerr
352tcltc
353tcuneq
354tcincais
357tctim
63594lpslmvc12
63596lptimvc12
63598lpuneqvc12
 .1.3.6.1.4.1.2011.2.25.4.10.42.1.4.1.1
optixSdhAlm2AisEnable
This object indicates the enable status of port alarm insert. 0: disable, 1: enable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.10.42.1.4.1.2

optixSdhJ1C2MonitorTable

table
.1.3.6.1.4.1.2011.2.25.4.10.42.1.5 · 1 row entry · 1 columns
Open in standard view 
This table describes configurations of J1C2 monitor management of the SDH board.
optixSdhJ1C2MonitorEntry entry .1.3.6.1.4.1.2011.2.25.4.10.42.1.5.1
This entry describes configurations of J1C2 monitor management of the SDH board.
Indexes
OPTIX-BOARD-MANAGE-MIBoptixLogBoardId OPTIX-BOARD-MANAGE-MIBoptixLogSubCardId OPTIX-PORT-MANAGE-MIBoptixPortId
Column Syntax OID
optixSdhJ1C2MonitorEnable
This object indicates the enable of J1C2 byte to be monitored. 0: disable, 1: enable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.10.42.1.5.1.1

optixSdhHsutTable

table
.1.3.6.1.4.1.2011.2.25.4.10.42.1.6 · 1 row entry · 2 columns
Open in standard view 
This table describes the unload path management for the SDH board.
optixSdhHsutEntry entry .1.3.6.1.4.1.2011.2.25.4.10.42.1.6.1
This entry describes the unload path management for the SDH board.
Indexes
OPTIX-BOARD-MANAGE-MIBoptixLogBoardId OPTIX-BOARD-MANAGE-MIBoptixLogSubCardId OPTIX-PORT-MANAGE-MIBoptixPortId optixSdhHsutAu4ID
Column Syntax OID
optixSdhHsutAu4ID
This object indicates the Au4ID of SDH board.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.42.1.6.1.1
optixSdhHsutEnable
This object indicates the enable state of unload path for SDH board. 0: disable, 1: enable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.10.42.1.6.1.2

optixSdhBoardTohTable

table
.1.3.6.1.4.1.2011.2.25.4.10.42.1.7 · 1 row entry · 1 columns
Open in standard view 
This table describes the enable status of send overhead byte management for the SDH board.
optixSdhBoardTohEntry entry .1.3.6.1.4.1.2011.2.25.4.10.42.1.7.1
Thisentry describes the enable status of send overhead byte management for the SDH board.
Indexes
OPTIX-BOARD-MANAGE-MIBoptixLogBoardId
Column Syntax OID
optixSdhBoardTohEnable
This object indicates the enabling status of sending overhead byte for the SDH board. 1/0 means respectively to enable/disable setting the sending overhead byte by the sending buffer of RAM
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.10.42.1.7.1.1

optixE1SrvModTable

table
.1.3.6.1.4.1.2011.2.25.4.10.42.1.8 · 1 row entry · 1 columns
Open in standard view 
This table describes the server mode for the E1 port.
optixE1SrvModEntry entry .1.3.6.1.4.1.2011.2.25.4.10.42.1.8.1
This entry describes the server mode for the E1 port.
Indexes
OPTIX-BOARD-MANAGE-MIBoptixLogBoardId OPTIX-BOARD-MANAGE-MIBoptixLogSubCardId OPTIX-PORT-MANAGE-MIBoptixPortId
Column Syntax OID
optixE1SrvMod
This object indicates the server mode for the E1 port.
Enumerationr/w
Enumerated Values:
0pdh
1ces
 .1.3.6.1.4.1.2011.2.25.4.10.42.1.8.1.1

optixSTM1SrvModTable

table
.1.3.6.1.4.1.2011.2.25.4.10.42.1.9 · 1 row entry · 1 columns
Open in standard view 
This table describes the server mode for the STM-1 port.
optixSTM1SrvModEntry entry .1.3.6.1.4.1.2011.2.25.4.10.42.1.9.1
This Entry describes the server mode for the STM-1 port.
Indexes
Column Syntax OID
optixSTM1SrvMod
This object indicates the server mode for the STM-1 port. 0: PDH, 1: CES
Enumerationr/w
Enumerated Values:
0tdm
1ces
 .1.3.6.1.4.1.2011.2.25.4.10.42.1.9.1.1