OMNITRON-PTP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
4
Rows
4
Columns
33
.1.3.6.1.4.1.7342.14.2 · 1 row entry · 2 columns
This table supports the port PTP configurations. Rows in this table are
automatically created, one for each port in the module. For GM4 only.
ostPtpPortCfgEntry entry .1.3.6.1.4.1.7342.14.2.1
This is a PTP port configuration table entry.
Indexes
ostPtpPortCfgIndex
Column Syntax OID
ostPtpPortCfgIndex
An index that is used to identify a specific PTP port user.
OMNITRON-TC-MIBOstPortSingleIndex
Textual Convention: OMNITRON-TC-MIBOstPortSingleIndex Unsigned32
Type Constraints:
range: 10101..999999
.1.3.6.1.4.1.7342.14.2.1.1
ostPtpPortCfgMode
The PTP port mode.

notConfigured(1) Port does not participate in PTP
sourcePort(2) Source port of PTP PDUs
egressPort(3) Egress port for PTP PDUs

Ports defind as either…
Enumerationr/w
Enumerated Values:
1notConfigured
2sourcePort
3egressPort
.1.3.6.1.4.1.7342.14.2.1.2
.1.3.6.1.4.1.7342.14.3 · 1 row entry · 23 columns
This table supports the instance PTP configurations for the XM5.
          
Each row in this table indicates a different PTP instance. Each row is
created manually via the SNMP manager.
ostPtpInstanceCfgEntry entry .1.3.6.1.4.1.7342.14.3.1
This is a PTP instance configuration table entry.
Indexes
ostPtpInstanceCfgIndex
Column Syntax OID
ostPtpInstanceCfgIndex
An index that is used to identify a specific PTP instance.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.7342.14.3.1.1
ostPtpInstanceCfgRowStatus
The status of the row.

The writable columns in a row cannot be changed if the row
is active. All columns must have a valid value before a row
can be activated.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.7342.14.3.1.2
ostPtpInstanceCfgEnable
This object specifies whether the PTP instance is enabled.

The value 'true' indicates that the instance is enabled.

The value 'false' indicates that the instance is disabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.7342.14.3.1.3
ostPtpInstanceCfgEvc
This object defines which EVC that the PTP PDUs are transported on.
Only valid EVC names can be written to this object.
OMNITRON-TC-MIBOstEvcNameStringOrNoner/w
Textual Convention: OMNITRON-TC-MIBOstEvcNameStringOrNone OctetString
Type Constraints:
range: 0..45
.1.3.6.1.4.1.7342.14.3.1.4
ostPtpInstanceCfgPortNumber
The list of ports that are associated with the PTP instance. At least
one port must be selected. Management Ports are not included.
OMNITRON-TC-MIBOstPortListr/w
Textual Convention: OMNITRON-TC-MIBOstPortList OctetString
.1.3.6.1.4.1.7342.14.3.1.5
ostPtpInstanceCfgTransport
This object selects the specific type of PTP transport protocol for
the specific PTP instance.

l2Ethernet(1) Transport is Layer 2 only
ipMulticast(2) Transport is Layer 3 with IP multicast address
ipUnic…
Enumerationr/w
Enumerated Values:
1l2Ethernet
2ipMulticast
3ipUnicast
.1.3.6.1.4.1.7342.14.3.1.6
ostPtpInstanceCfgClockMode
This object selects the PTP clock mode for the specific PTP instance.

transparent(1) PTP transparent clock mode
master(2) PTP master clock
slave(3) PTP slave clock
boundary(4) PTP bo…
Enumerationr/w
Enumerated Values:
1transparent
2master
3slave
4boundary
.1.3.6.1.4.1.7342.14.3.1.7
ostPtpInstanceCfgClockType
This object selects the PTP clock type for the specific PTP instance.

typ1Step(1) One step clock type
typ2Step(2) Two step clock type
Enumerationr/w
Enumerated Values:
1typ1Step
2typ2Step
.1.3.6.1.4.1.7342.14.3.1.8
ostPtpInstanceCfgServerIp1
The clock source Server IP 1 address for the specific PTP instance.
This object only needs to be defined for IP based transport instances.
OMNITRON-TC-MIBOstIpAddrr/w
Textual Convention: OMNITRON-TC-MIBOstIpAddr OctetString
Type Constraints:
range: 0..39
.1.3.6.1.4.1.7342.14.3.1.9
ostPtpInstanceCfgServerIp2
The clock source Server IP 2 address for the specific PTP instance.
This object only needs to be defined for IP based transport instances.
OMNITRON-TC-MIBOstIpAddrr/w
Textual Convention: OMNITRON-TC-MIBOstIpAddr OctetString
Type Constraints:
range: 0..39
.1.3.6.1.4.1.7342.14.3.1.10
ostPtpInstanceCfgSourceIp
The PTP source IP address for the specific PTP instance.
This object only needs to be defined for IP based transport instances.
OMNITRON-TC-MIBOstIpAddrr/w
Textual Convention: OMNITRON-TC-MIBOstIpAddr OctetString
Type Constraints:
range: 0..39
.1.3.6.1.4.1.7342.14.3.1.11
ostPtpInstanceCfgDomain
The PTP clock domain for the specific PTP instance.
Unsigned32r/w
Constraints:
range: 0-128
.1.3.6.1.4.1.7342.14.3.1.12
ostPtpInstanceCfgPriority
The PTP clock domain priority 1 for the specific PTP instance.
Unsigned32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.7342.14.3.1.13
ostPtpInstanceCfgCtagVid
The C-TAG VID associated with this EVC on this interface. For
a NNI port it indicates the PTP frame is double tagged, with the
inner tag the value of the object. For a UNI port is indicates a
different C-TAG VID from th…
OMNITRON-TC-MIBOstVlanIdr/w
Textual Convention: OMNITRON-TC-MIBOstVlanId Integer32
Type Constraints:
range: 0..4095
.1.3.6.1.4.1.7342.14.3.1.14
ostPtpInstanceCfgOffset
This object specifies the clock offset to the automatically calculated
offset for this specific PTP instance.

The clock offset is in nanoseconds and ranges from 0 to +32768. Negative
values are not valid.
nanosecondsSNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7342.14.3.1.15
ostPtpInstanceCfgStatus
This object indicates the status of the PTP instance.
OctetStringr/w
Constraints:
range: 0-64
.1.3.6.1.4.1.7342.14.3.1.16
ostPtpInstanceCfgTxSourcePort
This object indicates the PTP transmission source port when operating
as a master or boundary clock instance.

A value of '0' indicates there is no specific PTP transmission port
or the transmission port i…
OMNITRON-TC-MIBOstPortNumberr/w
Textual Convention: OMNITRON-TC-MIBOstPortNumber Unsigned32
Type Constraints:
range: 0..99
.1.3.6.1.4.1.7342.14.3.1.17
ostPtpInstanceCfgPriority2
This object indicates the PTP clock domain priority 2 for the specific
PTP instance.
Unsigned32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.7342.14.3.1.18
ostPtpInstanceCfgSubnetMask
This object indicates the PTP IPv4 subnet mask for the specific PTP
instance.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.7342.14.3.1.19
ostPtpInstanceCfgAnnounceRate
This object specifies the PTP announce rate, where rate is equal to
one message every 2^[AnnounceRate] seconds.

The default value is 1 message per 2^1 seconds or 1 message/2 seconds
Integer32r/w
Constraints:
range: -3-4
.1.3.6.1.4.1.7342.14.3.1.20
ostPtpInstanceCfgAnnounceTimeout
This object specifies the PTP announce timeout, where the timeout is
equal to 2^[AnnounceTimeout] seconds.

The default value is a timout after per 2^3 secs, or 1 timeout/8 seconds
Integer32r/w
Constraints:
range: 0-10
.1.3.6.1.4.1.7342.14.3.1.21
ostPtpInstanceCfgSyncRate
This object specifies the PTP sync message announce rate, where rate
is equal to one message every 2^[SyncRate] seconds.

The default value is 1 message per 2^0 secs, or 1 messasge/second
Integer32r/w
Constraints:
range: -7-4
.1.3.6.1.4.1.7342.14.3.1.22
ostPtpInstanceCfgDelayRequestRate
This object specifies the PTP delay request message rate, where rate
is equal to one message every 2^[DelayRequestRate] seconds.

The default value is 1 message per 2^0 secs, or 1 message/second
Integer32r/w
Constraints:
range: -7-4
.1.3.6.1.4.1.7342.14.3.1.23
.1.3.6.1.4.1.7342.14.4 · 1 row entry · 2 columns
This table supports the PTP port instance status for the XM5.
          
Each row in this table is created autmotically when an instance is
created and ports are assigned to the instance. Rows in this table
are automatically deleted if the associated PTP instance is deleted.
ostPtpPortInstanceStatusEntry entry .1.3.6.1.4.1.7342.14.4.1
This is a PTP port instance status table entry.
Indexes
ostPtpInstanceCfgIndex ostPtpPortInstanceStatusIndex
Column Syntax OID
ostPtpPortInstanceStatusIndex
An index that is used to identify a specific PTP port number in an
instance.
OMNITRON-TC-MIBOstPortSingleIndex
Textual Convention: OMNITRON-TC-MIBOstPortSingleIndex Unsigned32
Type Constraints:
range: 10101..999999
.1.3.6.1.4.1.7342.14.4.1.1
ostPtpPortInstanceStatusValue
This object indicates the status of a port for the PTP instance.
OctetStringr/w
Constraints:
range: 0-64
.1.3.6.1.4.1.7342.14.4.1.2
.1.3.6.1.4.1.7342.14.5 · 1 row entry · 6 columns
This table supports the Clock I/O instance configurations for the XM5.
          
Each row in this table indicates a different Clock I/O instance. Each
row is created automatically by the SNMP Agent.
ostClockIoInstanceCfgEntry entry .1.3.6.1.4.1.7342.14.5.1
This is a Clock I/O instance configuration table entry.
Indexes
ostClockIoInstanceCfgIndex
Column Syntax OID
ostClockIoInstanceCfgIndex
An index that is used to identify a specific Clock I/O instance.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.7342.14.5.1.1
ostClockIoInstanceCfgEnable
This object specifies whether the Clock I/O instance is enabled.

The value 'true' indicates that the instance is enabled.

The value 'false' indicates that the instance is disabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.7342.14.5.1.2
ostClockIoInstanceCfgDirection
This object selects the Clock I/O instance direction type.

notAvailable(0) Direction is not supported
input(1) Clock is an input
output(2) Clock is an ouput
Enumerationr/w
Enumerated Values:
0notAvailable
1input
2output
.1.3.6.1.4.1.7342.14.5.1.3
ostClockIoInstanceCfgRate
This object selects the Clock I/O instance rate.

notAvailable(0) Rate selection is not supported
rate1pps(1) Clock rate is 1 pulse per second (PPS)
rate10mhz(2) Clock rate is 10 MHz
Enumerationr/w
Enumerated Values:
0notAvailable
1rate1pps
2rate10mhz
.1.3.6.1.4.1.7342.14.5.1.4
ostClockIoInstanceCfgTerm
This object selects the Clock I/O instance rate.

notAvailable(0) Rate selection is not supported
on(1) I/O is terminated
off(2) I/O is terminated
Enumerationr/w
Enumerated Values:
0notAvailable
1on
2off
.1.3.6.1.4.1.7342.14.5.1.5
ostClockIoInstanceStatus
This object indicates the Clock I/O instance status

notAvailable(0) Clock I/O status is not available
output(1) Clock I/O set to output
input(2) Clock I/O set to input, i…
Enumeration
Enumerated Values:
0notAvailable
1output
2input
3inputValid
4inputAcquiring
5inputLocked
6inputLockedHoldover
7inputHoldover
8inputFreerun
9inputNotLocked
.1.3.6.1.4.1.7342.14.5.1.6