NORTEL-WLAN-AP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
13
Rows
13
Columns
68

ntWlanLineTable

table
.1.3.6.1.4.1.45.1.11.1.2.1 · 1 row entry · 5 columns
Open in standard view 
Table of descriptive and status information about
configuration of each RS-232 line in this system
ntWlanLineEntry entry .1.3.6.1.4.1.45.1.11.1.2.1.1
An entry in the table, containing information
about configuration in one RS232 line of the Access
Point.
Indexes
ntWlanLineIndex
Column Syntax OID
ntWlanLineIndex
This is defined as RS-232 index.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.45.1.11.1.2.1.1.1
ntWlanLineDataBits
This is defined as number of data bits for the RS232
interface.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.45.1.11.1.2.1.1.2
ntWlanLineParity
This is defined as parity of the RS232 interface.
Enumeration
Enumerated Values:
1odd
2even
99none
 .1.3.6.1.4.1.45.1.11.1.2.1.1.3
ntWlanLineSpeed
This is defined as the speed of the RS-232 interface.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.45.1.11.1.2.1.1.4
ntWlanLineStopBits
This is defined as the number of stop bits for the RS-232
interface.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.45.1.11.1.2.1.1.5

ntWlanPortTable

table
.1.3.6.1.4.1.45.1.11.1.3.1 · 1 row entry · 9 columns
Open in standard view 
Table of descriptive and status information about
configuration of each switch port (including expansion
slot) in this system. This table also contains information
about each trunk (similar to Cisco's EtherChannel).
ntWlanPortEntry entry .1.3.6.1.4.1.45.1.11.1.3.1.1
An entry in the table, containing information
about configuration in one switch port of the switch.
Indexes
ntWlanPortIndex
Column Syntax OID
ntWlanPortIndex
This is defined as ifIndex in the IF-MIB.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.45.1.11.1.3.1.1.1
ntWlanPortName
Indicates the port name. This is same as
ifAlias in the IF-MIB (RFC2863 or later).
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.45.1.11.1.3.1.1.2
ntWlanPortType
Indicates the port type.
Enumeration
Enumerated Values:
1other
2hundredBaseTX
3hundredBaseFX
4thousandBaseSX
5thousandBaseLX
6thousandBaseT
7thousandBaseGBIC
8thousandBaseMiniGBIC
 .1.3.6.1.4.1.45.1.11.1.3.1.1.3
ntWlanPortSpeedDpxCfg
Set the port speed and duplex mode as follows:
halfDuplex10(2) - 10Mbps and half duplex mode
fullDuplex10(3) - 10Mbps and full duplex mode
halfDuplex100(4) - 100Mbps and half duplex mode
fullDuplex100(5) - 100…
Enumeration
Enumerated Values:
1reserved
2halfDuplex10
3fullDuplex10
4halfDuplex100
5fullDuplex100
6halfDuplex1000
7fullDuplex1000
 .1.3.6.1.4.1.45.1.11.1.3.1.1.4
ntWlanPortFlowCtrlCfg
(1) Flow control mechanism is enabled.
If the port type is hundredBaseTX or thousandBaseSX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism. When
the port is operating in…
Enumeration
Enumerated Values:
1enabled
2disabled
3backPressure
4dot3xFlowControl
 .1.3.6.1.4.1.45.1.11.1.3.1.1.5
ntWlanPortCapabilities
Port capabilities.
Enumeration
Enumerated Values:
1portCap10full
2portCap100half
3portCap100full
4portCap1000half
5portCap1000full
6reserved6
7reserved7
8reserved8
9reserved9
10reserved10
11reserved11
12reserved12
13reserved13
14portCapSym
15portCapFlowCtrl
99portCap10half
 .1.3.6.1.4.1.45.1.11.1.3.1.1.6
ntWlanPortAutonegotiation
Whether autonegotiation is enabled.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.45.1.11.1.3.1.1.7
ntWlanPortSpeedDpxStatus
The operating speed and duplex mode of the
switched port. If this index is a trunk,
the speed is the speed of its individual members.
If this index is a trunk and the result
is inconsistent among its member ports, this …
Enumeration
Enumerated Values:
1error
2halfDuplex10
3fullDuplex10
4halfDuplex100
5fullDuplex100
6halfDuplex1000
7fullDuplex1000
 .1.3.6.1.4.1.45.1.11.1.3.1.1.8
ntWlanPortFlowCtrlStatus
(2) BackPressure flow control machanism is used.
(3) IEEE 802.3 flow control machanism is used.
(4) Flow control mechanism is disabled.
If this index is a trunk and the result
is inconsistent among its member ports, thi…
Enumeration
Enumerated Values:
1error
2backPressure
3dot3xFlowControl
4none
 .1.3.6.1.4.1.45.1.11.1.3.1.1.9

ntWlanDot11PhyOperationTable

table
.1.3.6.1.4.1.45.1.11.1.7.4.1 · 1 row entry · 5 columns
Open in standard view 
Table of descriptive and status information about
configuration of each radio of the AP.
ntWlanDot11PhyOperationEntry entry .1.3.6.1.4.1.45.1.11.1.7.4.1.1
An entry in the table, containing information
about configuration in one radio of the AP.
Indexes
ntWlanDot11Index
Column Syntax OID
ntWlanDot11Index
Radio index of the AP.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.45.1.11.1.7.4.1.1.1
ntWlanDot11TurboModeEnabled
This attribute, when true, shall indicate that the nortel's
propietory turbo mode option is enabled. The default value of
this attribute shall be false.
Enumeration
Enumerated Values:
1on
2off
99none
 .1.3.6.1.4.1.45.1.11.1.7.4.1.1.3
ntWlanDot11PreambleLength
This attribute determines whether or not a short or a long
preamble is used to delineate 802.11 frames.
Enumerationr/w
Enumerated Values:
1short
2long
99twelveSymbols
 .1.3.6.1.4.1.45.1.11.1.7.4.1.1.4
ntWlanDot11dWorldModeEnabled
This attribute determines whether 802.11d world mode is
enabled for this radio.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.45.1.11.1.7.4.1.1.5
ntWlanDot11ClosedSystem
This attribute determines whether the radio operates as a
closed system. When configured as a closed system, the
SSID is not included when broadcasting periodic beacon
frames.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.45.1.11.1.7.4.1.1.6

ntWlanDot11AuthenticationServerTable

table
.1.3.6.1.4.1.45.1.11.1.7.6 · 1 row entry · 11 columns
Open in standard view 
Table of descriptive and status information about
configuration of each authentication server.
ntWlanDot11AuthenticationServerEntry entry .1.3.6.1.4.1.45.1.11.1.7.6.1
An entry in the table, containing information
about configuration in one radio of the AP.
Indexes
ntWlanDot11ServerIndex
Column Syntax OID
ntWlanDot11ServerIndex
Radio index of the AP.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.45.1.11.1.7.6.1.1
ntWlanDot11AuthenticationServer
This values indicates the IP address of the
authentication server.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.45.1.11.1.7.6.1.2
ntWlanDot11AuthenticationPort
This values indicates the UDP Port used by the primary
authentication server.
Integer32r/w
Constraints:
range: 1024-65535
 .1.3.6.1.4.1.45.1.11.1.7.6.1.3
ntWlanDot11AuthenticationKey
This values indicates the shared key used by the
authentication server.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.45.1.11.1.7.6.1.4
ntWlanDot11AuthenticationRetransmit
This values indicates the retransmit timer length used by the
authentication server.
Integer32r/w
Constraints:
range: 1-30
 .1.3.6.1.4.1.45.1.11.1.7.6.1.5
ntWlanDot11AuthenticationTimeout
This values indicates the Timeout value(sec) used by the
authentication server.
SecondsInteger32r/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.45.1.11.1.7.6.1.6
ntWlanDot11SecondaryAuthServer
This values indicates the IP address of the
secondary authentication server.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.45.1.11.1.7.6.1.7
ntWlanDot11SecondaryAuthPort
This values indicates the UDP Port used by the primary
secondary authentication server.
Integer32r/w
Constraints:
range: 1024-65535
 .1.3.6.1.4.1.45.1.11.1.7.6.1.8
ntWlanDot11SecondaryAuthKey
This values indicates the shared key used by the
secondary authentication server.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.45.1.11.1.7.6.1.9
ntWlanDot11SecondaryAuthRetransmit
This values indicates the retransmit timer length used by the
secondary authentication server.
Integer32r/w
Constraints:
range: 1-30
 .1.3.6.1.4.1.45.1.11.1.7.6.1.10
ntWlanDot11SecondaryAuthTimeout
This values indicates the Timeout value(sec) used by the
secondary authentication server.
SecondsInteger32r/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.45.1.11.1.7.6.1.11

ntWlanDot11FilterTable

table
.1.3.6.1.4.1.45.1.11.1.7.7 · 1 row entry · 3 columns
Open in standard view 
Table of status information about
each configured MAC Address Filtering Entry.
ntWlanDot11FilterEntry entry .1.3.6.1.4.1.45.1.11.1.7.7.1
An entry in the table, containing information
about configuration in one radio of the AP.
Indexes
ntWlanDot11FilterIndex
Column Syntax OID
ntWlanDot11FilterIndex
Filter index.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.45.1.11.1.7.7.1.1
ntWlanDot11FilterAddress
This values indicates the MAC address of the
filter entry.
SNMPv2-TCPhysAddressr/w
Textual Convention: SNMPv2-TCPhysAddress OctetString
 .1.3.6.1.4.1.45.1.11.1.7.7.1.2
ntWlanDot11FilterStatus
This values indicates the Status of the filter entry.
Ifallowed, the client is allowed access to the network.
If disallowed, the no frames will be forwarded to the
network from the client.
Enumerationr/w
Enumerated Values:
30allowed
31denied
 .1.3.6.1.4.1.45.1.11.1.7.7.1.3

ntWlanDot11TrapTable

table
.1.3.6.1.4.1.45.1.11.1.7.9 · 1 row entry · 4 columns
Open in standard view 
Table of status information for Association and
Disassociation Trap
ntWlanDot11TrapEntry entry .1.3.6.1.4.1.45.1.11.1.7.9.1
An entry in the table, containing information
for the association and disassociation trap.
Indexes
ntWlanDot11InterfaceIndex
Column Syntax OID
ntWlanDot11InterfaceIndex
Interface index.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.45.1.11.1.7.9.1.1
ntWlanDot11AssociationStationAddress
This values indicates the MAC address of the Mobile Unit
associating with this Access Point.
SNMPv2-TCPhysAddress
Textual Convention: SNMPv2-TCPhysAddress OctetString
 .1.3.6.1.4.1.45.1.11.1.7.9.1.2
ntWlanDot11DisassociationStationAddress
This values indicates the MAC address of the Mobile Unit
no longer associated with this Access Point.
SNMPv2-TCPhysAddress
Textual Convention: SNMPv2-TCPhysAddress OctetString
 .1.3.6.1.4.1.45.1.11.1.7.9.1.3
ntWlanDot11AssociationMU
This values indicates the number of Mobile Units associated
on the Interface
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.45.1.11.1.7.9.1.4

ntWlanApRateSupportTable

table
.1.3.6.1.4.1.45.1.11.1.10.1 · 1 row entry · 3 columns
Open in standard view 
Table to configure which hardware-supported rates are
actively supported, and which are basic rates required
for an MU to connect to an AP.  Entries must exist in
this table for every hardware-supported rate for each
appropriate ifIndex value.
ntWlanApRateSupportEntry entry .1.3.6.1.4.1.45.1.11.1.10.1.1
An entry in the ntWlanApRateSupportTable.
Indexes
ntWlanApRateSupportIfIndex ntWlanApRateSupportSpeed
Column Syntax OID
ntWlanApRateSupportIfIndex
The ifIndex value of the radio.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.45.1.11.1.10.1.1.1
ntWlanApRateSupportSpeed
A supported data rate.
NtWlanApDataRate
Textual Convention: NtWlanApDataRate Integer32
Type Constraints:
range: 2..127
 .1.3.6.1.4.1.45.1.11.1.10.1.1.2
ntWlanApRateSupportLevel
This object indicates whether a specific rate is currently
supported, and if so, whether it is a basic rate.

off - indicates that this rate is not currently
supported.

supporte…
Enumerationr/w
Enumerated Values:
0off
1supported
2supportedBasic
 .1.3.6.1.4.1.45.1.11.1.10.1.1.3

ntWlanApSecurityTable

table
.1.3.6.1.4.1.45.1.11.1.11.1 · 1 row entry · 13 columns
Open in standard view 
Table to configure WEP and WPA security parameters.
Entries are per-radio.
ntWlanApSecurityEntry entry .1.3.6.1.4.1.45.1.11.1.11.1.1
An entry in the ntWlanApSecurityTable.
Indexes
ntWlanApSecurityIfIndex
Column Syntax OID
ntWlanApSecurityIfIndex
The ifIndex value of the radio.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.45.1.11.1.11.1.1.1
ntWlanApSecurityEnabled
Indicates whether security is enabled for a radio.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.45.1.11.1.11.1.1.2
ntWlanApSecurityWEPAuthType
The WEP authentication type.
Enumerationr/w
Enumerated Values:
0openSystem
1sharedKey
 .1.3.6.1.4.1.45.1.11.1.11.1.1.3
ntWlanApSecurityWEPKeyLength
Indicates the WEP key length being used.
Enumerationr/w
Enumerated Values:
0wepKey64
1wepKey128
2wepKey152
 .1.3.6.1.4.1.45.1.11.1.11.1.1.4
ntWlanApSecurityWEPActiveKey
Indicates which WEP key is currently in use.
Integer32r/w
Constraints:
range: 1-4
 .1.3.6.1.4.1.45.1.11.1.11.1.1.5
ntWlanApSecurityWEPKey1
The first WEP key. Retrieval of this object will
always return an empty string.
NtWlanApWEPKeyr/w
Textual Convention: NtWlanApWEPKey OctetString
Type Constraints:
range: 0
range: 5
range: 13
range: 16
 .1.3.6.1.4.1.45.1.11.1.11.1.1.6
ntWlanApSecurityWEPKey2
The second WEP key. Retrieval of this object will
always return an empty string.
NtWlanApWEPKeyr/w
Textual Convention: NtWlanApWEPKey OctetString
Type Constraints:
range: 0
range: 5
range: 13
range: 16
 .1.3.6.1.4.1.45.1.11.1.11.1.1.7
ntWlanApSecurityWEPKey3
The third WEP key. Retrieval of this object will
always return an empty string.
NtWlanApWEPKeyr/w
Textual Convention: NtWlanApWEPKey OctetString
Type Constraints:
range: 0
range: 5
range: 13
range: 16
 .1.3.6.1.4.1.45.1.11.1.11.1.1.8
ntWlanApSecurityWEPKey4
The fourth WEP key. Retrieval of this object will
always return an empty string.
NtWlanApWEPKeyr/w
Textual Convention: NtWlanApWEPKey OctetString
Type Constraints:
range: 0
range: 5
range: 13
range: 16
 .1.3.6.1.4.1.45.1.11.1.11.1.1.9
ntWlanApSecurityWPASupport
Indicates whether WPA security is supported.
Enumerationr/w
Enumerated Values:
1supported
2required
3wepOnly
 .1.3.6.1.4.1.45.1.11.1.11.1.1.10
ntWlanApSecurityWPAMode
The WPA mode.
Enumerationr/w
Enumerated Values:
0dynamic
1preSharedKey
 .1.3.6.1.4.1.45.1.11.1.11.1.1.11
ntWlanApSecurityWPAPreSharedKey
The WPA pre-shared key.
OctetStringr/w
Constraints:
range: 63-63
 .1.3.6.1.4.1.45.1.11.1.11.1.1.12
ntWlanApSecurityWPAMcastCypherMode
The multicast cypher mode.
Enumerationr/w
Enumerated Values:
0wep
1tkip
2aes
 .1.3.6.1.4.1.45.1.11.1.11.1.1.13

ntWlanApQoSEtherTypeToQueueTable

table
.1.3.6.1.4.1.45.1.11.1.12.2 · 1 row entry · 3 columns
Open in standard view 
Table to configure mappings from ethernet type
to queue number.
ntWlanApQoSEtherTypeToQueueEntry entry .1.3.6.1.4.1.45.1.11.1.12.2.1
An entry in the ntWlanApQoSTable.
Indexes
ntWlanApQoSEtherTypeToQueueIndex
Column Syntax OID
ntWlanApQoSEtherTypeToQueueIndex
An ethernet type, to be mapped to a queue.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.45.1.11.1.12.2.1.1
ntWlanApQoSEtherTypeToQueueNumber
The queue number to which the ether type is mapped.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.45.1.11.1.12.2.1.2
ntWlanApQoSEtherTypeToQueueRowStatus
This object is used to create and destroy entries in
this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.45.1.11.1.12.2.1.3

ntWlanApQoSMACToQueueTable

table
.1.3.6.1.4.1.45.1.11.1.12.3 · 1 row entry · 3 columns
Open in standard view 
Table to configure mappings from ethernet MAC address
to queue number.
ntWlanApQoSMACToQueueEntry entry .1.3.6.1.4.1.45.1.11.1.12.3.1
An entry in the ntWlanApQoSTable.
Indexes
ntWlanApQoSMACToQueueAddress
Column Syntax OID
ntWlanApQoSMACToQueueAddress
An ethernet MAC address, to be mapped to a queue.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.45.1.11.1.12.3.1.1
ntWlanApQoSMACToQueueNumber
The queue number to which the MAC address is mapped.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.45.1.11.1.12.3.1.2
ntWlanApQoSMACToQueueRowStatus
This object is used to create and destroy entries in
this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.45.1.11.1.12.3.1.3

ntWlanApVlanTable

table
.1.3.6.1.4.1.45.1.11.1.13.2 · 1 row entry · 2 columns
Open in standard view 
Table to configure the default VID per-radio.
ntWlanApVlanEntry entry .1.3.6.1.4.1.45.1.11.1.13.2.1
An entry in the ntWlanApVlanTable.
Indexes
ntWlanApVlanIfIndex
Column Syntax OID
ntWlanApVlanIfIndex
The ifIndex value of the radio.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.45.1.11.1.13.2.1.1
ntWlanApVlanDefaultVid
The default VID of the radio.
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.45.1.11.1.13.2.1.2

ntWlanApVlanMUMACToVidTable

table
.1.3.6.1.4.1.45.1.11.1.13.3 · 1 row entry · 2 columns
Open in standard view 
Table containing mappings from Mobile Unit MAC
addresses to VLAN ID values.
ntWlanApVlanMUMACToVidEntry entry .1.3.6.1.4.1.45.1.11.1.13.3.1
An entry in the ntWlanApVlanMUMACToVidTable.
Indexes
ntWlanApVlanMUMACToVidAddress
Column Syntax OID
ntWlanApVlanMUMACToVidAddress
The ethernet MAC address of a Mobile Unit.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.45.1.11.1.13.3.1.1
ntWlanApVlanMUMACToVidNumber
The VID to which this Mobile Unit's MAC is mapped.
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.45.1.11.1.13.3.1.2

ntWlanApMUStatsTable

table
.1.3.6.1.4.1.45.1.11.1.14.1 · 1 row entry · 5 columns
Open in standard view 
Table of per-Mobile Unit statistics.
ntWlanApMUStatsEntry entry .1.3.6.1.4.1.45.1.11.1.14.1.1
An entry in the ntWlanApMUStatsTable.
Indexes
ntWlanApMUStatsMUAddress
Column Syntax OID
ntWlanApMUStatsMUAddress
The ethernet MAC address of the Mobile Unit.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.45.1.11.1.14.1.1.1
ntWlanApMUStatsPacketsIn
A count of the packets received from this MU.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.45.1.11.1.14.1.1.2
ntWlanApMUStatsPacketsOut
A count of the packets sent to this MU.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.45.1.11.1.14.1.1.3
ntWlanApMUStatsOctetsIn
A count of the octets received from this MU.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.45.1.11.1.14.1.1.4
ntWlanApMUStatsOctetsOut
A count of the octets sent to this MU.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.45.1.11.1.14.1.1.5