NEWTEC-BBFOVERIPIN-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
3
Rows
3
Columns
26
.1.3.6.1.4.1.5835.5.2.1200.1.3
·
1 row entry
·
8 columns
Configuration table
A conceptual row of the ntcConfigurationTableTable.
Indexes
ntcConfigurationTableName
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ntcConfigurationTableName
Name of the configuration
|
OctetString Constraints: range: 1-32 |
.1.3.6.1.4.1.5835.5.2.1200.1.3.1.1 |
||||||||||||
|
ntcConfigurationTableRowStatus
The status of this conceptual row. An existing conceptual row can be in any
one of the three states, 'notReady', 'notInService', or 'active'. If the manager wishes to add a row in a single shot with values for all the c… |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.5835.5.2.1200.1.3.1.2 |
||||||||||||
|
ntcBbfOIpInEpEnable
Enable or disable a BBF endpoint.
|
NEWTEC-TC-MIBNtcEnabler/w Textual Convention: NEWTEC-TC-MIBNtcEnable EnumerationType Values:
|
.1.3.6.1.4.1.5835.5.2.1200.1.3.1.3 |
||||||||||||
|
ntcBbfOIpInIpEpAddressType
Configuration of the IP address type for BBF over IP reception. (unicast or
multicast) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.5835.5.2.1200.1.3.1.4 |
||||||||||||
|
ntcBbfOIpInEpMulticastAddress
Multicast IP address used to receive the BBF over IP data. Regular expression
: (?-mix:^\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}$) |
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.5835.5.2.1200.1.3.1.5 |
||||||||||||
|
ntcBbfOIpInEpIpUdpPort
Configuration of the UDP port on which the BBF over IP is received
|
Unsigned32r/w Constraints: range: 1-65535 |
.1.3.6.1.4.1.5835.5.2.1200.1.3.1.6 |
||||||||||||
|
ntcBbfOIpInEpBbfType
Type of baseband frames which are received in the BBF over IP functionality.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.5835.5.2.1200.1.3.1.7 |
||||||||||||
|
ntcBbfOIpInEpSourceRedundancy
Enable or disable source redundancy.
|
NEWTEC-TC-MIBNtcEnabler/w Textual Convention: NEWTEC-TC-MIBNtcEnable EnumerationType Values:
|
.1.3.6.1.4.1.5835.5.2.1200.1.3.1.8 |
ntcMonitoringTableTable
table.1.3.6.1.4.1.5835.5.2.1200.1.4.11
·
1 row entry
·
13 columns
Monitoring table
A conceptual row of the ntcMonitoringTableTable.
Indexes
ntcMonitoringTableName
| Column | Syntax | OID |
|---|---|---|
|
ntcMonitoringTableName
Name of the output monitor
|
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.5835.5.2.1200.1.4.11.1.1 |
|
ntcBbfOIpInMonBbfInputBitRate
BBF over IP input bit rate in bps.
|
bpsSNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.5835.5.2.1200.1.4.11.1.2 |
|
ntcBbfOIpInMonSourceAddress
Source sending the traffic
|
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.5835.5.2.1200.1.4.11.1.3 |
|
ntcBbfOIpInMonBbfInCount
Number of received BBFs.
|
framesSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.5835.5.2.1200.1.4.11.1.4 |
|
ntcBbfOIpInMonBbfOutCount
Number of transmitted BBFs.
|
framesSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.5835.5.2.1200.1.4.11.1.5 |
|
ntcBbfOIpInMonBbfByteOutCount
This parameter counts the number of Baseband Frame bytes properly transmitted
in a stream. |
bytesSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.5835.5.2.1200.1.4.11.1.6 |
|
ntcBbfOIpInMonBbfDropCount
Number of dropped BBFs.
|
framesSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.5835.5.2.1200.1.4.11.1.7 |
|
ntcBbfOIpInMonBbfOverflowCount
Number of BBFs that are dropped for a specific BBF stream because the input
data buffer is full. |
framesSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.5835.5.2.1200.1.4.11.1.8 |
|
ntcBbfOIpInMonBbfInvFrameCount
Number of BBFs that are dropped because the received modulation type is not
active on the device. |
framesSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.5835.5.2.1200.1.4.11.1.9 |
|
ntcBbfOIpInMonBbfDiscontCount
When the sequence numbers are not continuous for a certain BBF stream this
counter will be incremented. |
framesSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.5835.5.2.1200.1.4.11.1.10 |
|
ntcBbfOIpInMonBbfModNS
Number of BBFs which are dropped because the received modcod is not licensed
for a specified BBF stream. |
framesSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.5835.5.2.1200.1.4.11.1.11 |
|
ntcBbfOIpInMonBbfByteCorCount
This parameter counts the number of corrupted Baseband Frame bytes that are
dropped for a certain BBF stream. |
bytesSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.5835.5.2.1200.1.4.11.1.12 |
|
ntcBbfOIpInMonBbfInvSignCount
This parameter counts the number of invalid Tellitec Signalling Frames that
are dropped for a certain BBF stream. |
framesSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.5835.5.2.1200.1.4.11.1.13 |
ntcAlarmStatusTableTable
table.1.3.6.1.4.1.5835.5.2.1200.1.4.12
·
1 row entry
·
5 columns
Alarm status table
A conceptual row of the ntcAlarmStatusTableTable.
Indexes
ntcStreamInx
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
ntcStreamInx
Name of the alarm monitor
|
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.5835.5.2.1200.1.4.12.1.1 |
||||
|
ntcBbfOIpInMonBbfNoInpDataError
This alarm is raised when no input data is received between a 1 second time
interval for 1 or more BBF streams. This variable indicates the current status of the alarm. |
NEWTEC-TC-MIBNtcAlarmState Textual Convention: NEWTEC-TC-MIBNtcAlarmState EnumerationType Values:
|
.1.3.6.1.4.1.5835.5.2.1200.1.4.12.1.2 |
||||
|
ntcBbfOverflowError
This alarm is raised when the input data buffer for 1 or more BBF streams is
full. This variable indicates the current status of the alarm. |
NEWTEC-TC-MIBNtcAlarmState Textual Convention: NEWTEC-TC-MIBNtcAlarmState EnumerationType Values:
|
.1.3.6.1.4.1.5835.5.2.1200.1.4.12.1.3 |
||||
|
ntcBbfDiscontinuityError
The alarm is raised when the sequence numbers are not continuous for a
specific ntS2BBF input stream for 5 sec. This variable indicates the current status of the alarm. |
NEWTEC-TC-MIBNtcAlarmState Textual Convention: NEWTEC-TC-MIBNtcAlarmState EnumerationType Values:
|
.1.3.6.1.4.1.5835.5.2.1200.1.4.12.1.4 |
||||
|
ntcBbfModcodNotSupportedError
This alarm is raised when Baseband frames are dropped due to receiving a non
licensed modcod. This variable indicates the current status of the alarm. |
NEWTEC-TC-MIBNtcAlarmState Textual Convention: NEWTEC-TC-MIBNtcAlarmState EnumerationType Values:
|
.1.3.6.1.4.1.5835.5.2.1200.1.4.12.1.5 |