NEWTEC-BANDWIDTH-CANCELLATION-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
3
Rows
3
Columns
17
ntcBwCCfgTable
table.1.3.6.1.4.1.5835.5.2.9100.1.2
·
1 row entry
·
8 columns
Configuration table
A conceptual row of the ntcBwCCfgTable.
Indexes
ntcBwCCfgName
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
ntcBwCCfgName
Name of the input configuration
|
OctetString Constraints: range: 1-32 |
.1.3.6.1.4.1.5835.5.2.9100.1.2.1.1 |
||||||
|
ntcBwCCfgEnable
Enable or disable bandwidth cancellation
|
NEWTEC-TC-MIBNtcEnabler/w Textual Convention: NEWTEC-TC-MIBNtcEnable EnumerationType Values:
|
.1.3.6.1.4.1.5835.5.2.9100.1.2.1.2 |
||||||
|
ntcBwCCfgExpRoundTripDelay
Set this to the round trip delay the carrier (that is uplinked, received and
cancelled out) will experience. The closer this value is to the actual delay, the faster the cancelling will start. Set this value to 0 when d… |
msUnsigned32r/w Constraints: range: 0-500 |
.1.3.6.1.4.1.5835.5.2.9100.1.2.1.3 |
||||||
|
ntcBwCCfgRoundTripDelayUncert
The delay search window that the cancellation function will use to try to
acquire full lock. Advised starting value is set to 20 ms but once the actual round trip delay is known, the search range can be decreased to red… |
msUnsigned32r/w Constraints: range: 1-100 |
.1.3.6.1.4.1.5835.5.2.9100.1.2.1.4 |
||||||
|
ntcBwCCfgLocalCenterFreqOffset
The center frequency offset of the received local carrier (that is uplinked,
received and cancelled out) |
HzInteger32r/w Constraints: range: -100000000-100000000 |
.1.3.6.1.4.1.5835.5.2.9100.1.2.1.5 |
||||||
|
ntcBwCCfgLocalCenterFreqUncert
The frequency search window in which the demodulator will search for the
received local carrier. By observing the local carrier center frequency offset, this value can be decreased to reduce search time and speed up ful… |
HzUnsigned32r/w Constraints: range: 50000-7500000 |
.1.3.6.1.4.1.5835.5.2.9100.1.2.1.6 |
||||||
|
ntcBwCCfgLocalSpectralInversion
In case an upconverter or the satellite transponder inverses the spectrum of
the carrier, the cancellation function needs to re-inverse the spectrum prior to actual cancellation. In case automatic is used, the canceller… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.5835.5.2.9100.1.2.1.7 |
||||||
|
ntcBwCCfgBandwidthMode
The Bandwidth Mode sets the range of parameters of the acquisition loops. Use
the bandwidth mode to balance search range versus acquisition time. Normal: standard settings for the acquisition loops. Robust: extended ran… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.5835.5.2.9100.1.2.1.8 |
ntcBwCMonTable
table.1.3.6.1.4.1.5835.5.2.9100.1.3
·
1 row entry
·
8 columns
Monitoring table
A conceptual row of the ntcBwCMonTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
ntcBwCMonState
The state of the bandwidth cancellation function can be off (in case bandwidth
cancellation is disabled), searching (when in the process of acquiring lock) or locked when the cancellation function is fully operational. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.5835.5.2.9100.1.3.1.1 |
||||||
|
ntcBwCMonRoundTripDelay
The measured round trip delay the carrier (that is uplinked and again
received) experiences. Use this value to fine tune the control parameter 'Expected round trip delay'. The round trip delay can slightly change due to… |
msFLOAT-TC-MIBFloat32TC Textual Convention: FLOAT-TC-MIBFloat32TC OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.5835.5.2.9100.1.3.1.2 |
||||||
|
ntcBwCMonLocalToTotalPowerRatio
The measured ratio between the total received power at the input of the modem
and the received local carrier power. |
dBFLOAT-TC-MIBFloat32TC Textual Convention: FLOAT-TC-MIBFloat32TC OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.5835.5.2.9100.1.3.1.3 |
||||||
|
ntcBwCMonLocalToRemotePowerRatio
The measured ratio between the remote carrier power and the received local
carrier power. |
dBFLOAT-TC-MIBFloat32TC Textual Convention: FLOAT-TC-MIBFloat32TC OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.5835.5.2.9100.1.3.1.4 |
||||||
|
ntcBwCMonLocalLevel
The power of the received local carrier (that is uplinked then received) prior
to actual cancellation. |
dBmFLOAT-TC-MIBFloat32TC Textual Convention: FLOAT-TC-MIBFloat32TC OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.5835.5.2.9100.1.3.1.5 |
||||||
|
ntcBwCMonLocalSymbolRate
The measured symbolrate of the local carrier (that is uplink, received and
cancelled out). |
baudUnsigned32 Constraints: range: 0-133000000 |
.1.3.6.1.4.1.5835.5.2.9100.1.3.1.6 |
||||||
|
ntcBwCMonLocalFreqOffset
The difference between the set local carrier frequency and the actual detected
local carrier frequency. |
HzFLOAT-TC-MIBFloat32TC Textual Convention: FLOAT-TC-MIBFloat32TC OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.5835.5.2.9100.1.3.1.7 |
||||||
|
ntcBwCMonLocalSpectralInversion
The spectral inversion of the local carrier (that is uplinked and again
received) that is applied. This can be either have been set manually or detected automatically (by using the 'automatic' setting in the 'Local carr… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.5835.5.2.9100.1.3.1.8 |
ntcBwCAlarmStateTable
table.1.3.6.1.4.1.5835.5.2.9100.1.4
·
1 row entry
·
1 columns
Alarm Status table
A conceptual row of the ntcBwCAlarmStateTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
ntcBwCASNoLock
This alarm is raised when the bandwidth canceller is enabled but not locked
This variable indicates the current status of the alarm. |
NEWTEC-TC-MIBNtcAlarmState Textual Convention: NEWTEC-TC-MIBNtcAlarmState EnumerationType Values:
|
.1.3.6.1.4.1.5835.5.2.9100.1.4.1.1 |