NETSCREEN-NAT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
35

nsNatMipTable

table
.1.3.6.1.4.1.3224.11.1 · 1 row entry · 7 columns
Open in standard view 
Mapped IP(MIP) is a direct one-to-one maping of traffic
destined  for one IP address ot another IP address. On
NetScreen device,  MIP addresses for tunnel and untrusted
interfaces can be created.
nsNatMipEntry entry .1.3.6.1.4.1.3224.11.1.1
An entry containing attributes of a mip address
Indexes
nsNatMipIndex
Column Syntax OID
nsNatMipIndex
A unique value for each address. Its value ranges between 0
and 65535 and may not be contingous.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.3224.11.1.1.1
nsNatMipIp
mip address. A MIP must be in the same subnet as the tunnel
interface to which it is linked to; however, for the untrusted
interface, a MIP does not need to be in the same subnet. In
either case, a MIP must not be the …
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.3224.11.1.1.2
nsNatMipNetmask
Subnet mask for this MIP.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.3224.11.1.1.3
nsNatMipHost
Host ip address mip mapping to.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.3224.11.1.1.4
nsNatMipIfIp
Interface's ip address that a MIP is linked to.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.3224.11.1.1.5
nsNatMipIfNetmask
Interface's netmask that a MIP is linked to.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.3224.11.1.1.6
nsNatMipVsys
Virtual system this mip belongs to.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3224.11.1.1.7

nsNatDipTable

table
.1.3.6.1.4.1.3224.11.2 · 1 row entry · 9 columns
Open in standard view 
A DIP(Dynamic IP) pool is a range of IP addresses from which
the NetScreen device can dynamically take addresses to use when
performing NAT on the source IP address of outgoing or incoming
IP packets.
nsNatDipEntry entry .1.3.6.1.4.1.3224.11.2.1
An entry containing attributes of a dynamic address
Indexes
nsNatDipIndex
Column Syntax OID
nsNatDipIndex
A unique value for each address. Its value ranges between 0
and 65535 and may not be contigous.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.3224.11.2.1.1
nsNatDipId
DIP pool id.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3224.11.2.1.2
nsNatDipLow
Start IP Address Range. The range of addresses in a DIP pool
must be in the same subnet as the interface IP address, but the
DIP pool should not contain the interface IP or any MIP or VIP
address that might on that sub…
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.3224.11.2.1.3
nsNatDipHigh
End IP Address Range. The range of addresses in a DIP pool
must be in the same subnet as the interface IP address, but the
DIP pool should not contain the interface IP or any MIP or VIP
address that might on that subne…
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.3224.11.2.1.4
nsNatDipIfIp
Interface's ip address that a DIP is linked to.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.3224.11.2.1.5
nsNatDipIfNetmask
interface's ip address that a DIP is linked to.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.3224.11.2.1.6
nsNatDipPTEnable
Enable Port Translation
Enumeration
Enumerated Values:
0disable
1enabled
 .1.3.6.1.4.1.3224.11.2.1.7
nsNatDipVsys
virtual system this dip belongs to
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3224.11.2.1.8
nsNatDipUtil
dip pool utilzation for this entry. Only applicable to fixed dip. If this is not a fixed dip this will return 0
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3224.11.2.1.9

nsNatVipCfgTable

table
.1.3.6.1.4.1.3224.11.3.1 · 1 row entry · 6 columns
Open in standard view 
VIP(Virtual IP) allows you to map routable IP addresses to
internal servers, therby providing transparent connections for
a NAT networks to the Internet. This table collects all VIP
configurations in NetScreen device.
nsNatVipCfgEntry entry .1.3.6.1.4.1.3224.11.3.1.1
Each entry in the nsNatVipCfgTable holds a set of
configuration parameters associated with an instance of VIP.
Indexes
nsNatVipCfgIndex
Column Syntax OID
nsNatVipCfgIndex
A unique value for each vip configuation. Its value ranges
between 1 and 65535 and may not be contingous.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.3224.11.3.1.1.1
nsNatVipCfgIp
The IP address for the VIP, which must be in the same subnet
as the untrusted interface and can even be the same address as
the untrusted interface.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.3224.11.3.1.1.2
nsNatVipCfgPort
The port number for communication between the trusted server
and the untrusted interfce on the NetScreen device.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3224.11.3.1.1.3
nsNatVipCfgService
Service for the server on the trusted interface.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.3224.11.3.1.1.4
nsNatVipCfgStatus
The status of the server on the trusted/DMZ interface.
Enumeration
Enumerated Values:
0not-available
1available
 .1.3.6.1.4.1.3224.11.3.1.1.5
nsNatVipCfgLoadBalance
Load balance algorithm for the Virtual IP servers.
Enumeration
Enumerated Values:
0null
1round-robin
2weighted-round-robin
3least-conns
4weighted-least-conns
 .1.3.6.1.4.1.3224.11.3.1.1.6

nsNatVipServerTable

table
.1.3.6.1.4.1.3224.11.3.2 · 1 row entry · 7 columns
Open in standard view 
Ballancing the loads on NetScreen servers allow traffic
intended for a server(one IP address on the untrusted network)
to be mapped to several different IP addresses on the DMZ or
trusted network. There can be up to eight servers in one load
balancing group, which apperas as a single virtual server.This
table collects all the  server pool configurations for the
virtual ip server.
nsNatVipServerEntry entry .1.3.6.1.4.1.3224.11.3.2.1
An entry containing attributes of a vip configuration's server
pool.
Indexes
nsNatVipServerIndex
Column Syntax OID
nsNatVipServerIndex
A unique value for each vip server configuation. Its value
ranges between 1 and 65535 and may not be contigous.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.3224.11.3.2.1.1
nsNatVipServerVIP
The IP address for the VIP.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.3224.11.3.2.1.2
nsNatVipServerService
Service provideing through the VIP.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3224.11.3.2.1.3
nsNatVipServerLoadBalance
Load balance algorithm for the vitural IP servers.
Enumeration
Enumerated Values:
0null
1round-robin
2weighted-round-robin
3least-conns
4weighted-least-conns
 .1.3.6.1.4.1.3224.11.3.2.1.4
nsNatVipServerIp
Virtual IP server's IP address.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.3224.11.3.2.1.5
nsNatVipServerWeight
Loadbalance algorithm weight.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3224.11.3.2.1.6
nsNatVipServerStatus
Virtual IP server's status.
Enumeration
Enumerated Values:
0down
1up
 .1.3.6.1.4.1.3224.11.3.2.1.7

nsNatDipPPortTable

table
.1.3.6.1.4.1.3224.11.4 · 1 row entry · 6 columns
Open in standard view 
show pseudo port allocated status of a dynamic address
nsNatDipPPortEntry entry .1.3.6.1.4.1.3224.11.4.1
An entry show pseudo port allocated status of a dynamic address
Indexes
nsNatDipPPortIndex
Column Syntax OID
nsNatDipPPortIndex
A unique value for each address. Its value ranges between 0
and 65535 and may not be contigous.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.3224.11.4.1.1
nsNatDipAllPort
All port of the dip
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3224.11.4.1.2
nsNatDipAllocatedPort
Allocated port of the dip
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3224.11.4.1.3
nsNatDipAvailablePort
Available port of the dip
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3224.11.4.1.4
nsNatDipAllocatedPairedPort
Allocated paired port of the dip
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3224.11.4.1.5
nsNatDipAvailablePairedPort
Available paired port of the dip
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3224.11.4.1.6