NAG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
27
Rows
27
Columns
168

sysPowerStateTable

table
.1.3.6.1.4.1.57206.7.100.1.7 · 1 row entry · 3 columns
Open in standard view 
the power supply status for hot-swap PSU switch
sysPowerStateEntry entry .1.3.6.1.4.1.57206.7.100.1.7.1
power supply status
Indexes
sysPowerSlotIndex
Column Syntax OID
sysPowerSlotIndex
Module model No.
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.57206.7.100.1.7.1.1
sysPowerState
if the power supply insert
Enumeration
Enumerated Values:
0sysPowerNotInstalled
1sysPowerInstalled
 .1.3.6.1.4.1.57206.7.100.1.7.1.2
sysPowerStatus
Power Status
Enumeration
Enumerated Values:
0normal
1abnormal
 .1.3.6.1.4.1.57206.7.100.1.7.1.5

sysFanTable

table
.1.3.6.1.4.1.57206.7.100.1.12 · 1 row entry · 3 columns
Open in standard view 
the state of fan.
sysFanEntry entry .1.3.6.1.4.1.57206.7.100.1.12.1
fan supply status
Indexes
sysFanIndex
Column Syntax OID
sysFanIndex
system fan entry index
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.57206.7.100.1.12.1.1
sysFanStatus
Whether the slot fan is error, normal or abnormal.
Enumeration
Enumerated Values:
0normal
1abnormal
2error
 .1.3.6.1.4.1.57206.7.100.1.12.1.3
sysFanSpeedRpm
Rpm of fan
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.57206.7.100.1.12.1.10

priPortTable

table
.1.3.6.1.4.1.57206.7.100.3.2 · 1 row entry · 18 columns
Open in standard view 
A list of port entries.
priPortEntry entry .1.3.6.1.4.1.57206.7.100.3.2.1
A port entry containing port information,
status, and control.
Indexes
portIndex
Column Syntax OID
portIndex
port No.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.57206.7.100.3.2.1.1
portName
Name of the port. exp:financial.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.57206.7.100.3.2.1.2
slotNum
This value is denoting the number of slot.
For the static slot,the value is 1,while for
the extended slot the value is real extended slot number.
Integer32
Constraints:
range: 0-16
 .1.3.6.1.4.1.57206.7.100.3.2.1.4
portType
Type of expansion module in this port.
Enumeration
Enumerated Values:
0typeSFP
1typeCombo
8typeElecGE
9typePortAGG
11typeOptXge
 .1.3.6.1.4.1.57206.7.100.3.2.1.5
bandwidthControlStatus
The bandwidth-control status of the port.
Its functionality is to stop the bandwidth control.
The only way to enable bandwidth control is to set receiveBandwidth or transmitBandwith.
Enumeration
Enumerated Values:
0ingress
1egress
2both
3none
 .1.3.6.1.4.1.57206.7.100.3.2.1.7
maxBandwidth
The max bandwidth of the port.
Enumeration
Enumerated Values:
0default
1bw100M
2bw1000M
3bw10000M
4bw40000M
5bw20000M
6bw25G
7bw100G
 .1.3.6.1.4.1.57206.7.100.3.2.1.8
receiveBandwidth
The recevice bandwidth of the port. Its unit is kbs.
The command 'bandwidth control 50 both' in console mode equals
setting both receiveBandwidth and transmitBandwidth to 50 kbs.
Set 0 is no bandwidth.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.57206.7.100.3.2.1.9
transmitBandwidth
The transmit bandwidth of the port. Its unit is kbs.
Set 0 is no bandwidth.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.57206.7.100.3.2.1.10
shutdown
Close or open to specify the port.
Enumerationr/w
Enumerated Values:
0shutDown
1noshutdown
 .1.3.6.1.4.1.57206.7.100.3.2.1.12
speedDuplex
The speed and duplex status of the port.
Enumerationr/w
Enumerated Values:
0auto
1half10
2full10
3half100
4full100
6full1000
7neg-10-1000-auto
8neg-10-1000-full
9neg-100-auto
10neg-100-full
11neg-100-half
12neg-1000-auto
13neg-1000-full
14neg-100-1000-auto
15neg-100-1000-full
16neg-10-auto
17neg-10-full
18neg-10-half
19neg-10-100-auto
20neg-10-100-full
21neg-10-100-half
22neg-10-100-1000-full
23neg-10-100-1000-half
25full-10g
26dac100cm
27dac300cm
28dac500cm
29dac50cm
30full2500
 .1.3.6.1.4.1.57206.7.100.3.2.1.14
portMode
port mode: 1 is access,2 is trunk,3 is hybrid, 4 is private-vlan host, 5 is private-vlan promiscuous
Enumerationr/w
Enumerated Values:
1access
2trunk
3hybrid
4private-vlan-host
5private-vlan-promiscuous
 .1.3.6.1.4.1.57206.7.100.3.2.1.15
pvid
port of native vlan No.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.57206.7.100.3.2.1.16
vctAction
This object indicates the VCT action of the port, the value 1 is permitted
when SET this entry though you can GET 1(processing) and 0(succeed);
The specified port will operate the virtual-cable-test when one sets 1 to …
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.57206.7.100.3.2.1.18
vctLastStatus
Indicates the last VCT status of the port.
OctetString
Constraints:
range: 0-1000
 .1.3.6.1.4.1.57206.7.100.3.2.1.19
portTrunkAllowedvlan
trunk port allowed vlan list string
OctetStringr/w .1.3.6.1.4.1.57206.7.100.3.2.1.20
portHybridTaggedAllowedvlan
hybrid port tagged allowed vlan list string
OctetStringr/w .1.3.6.1.4.1.57206.7.100.3.2.1.21
portHybridUntaggedAllowedvlan
hybrid port untagged allowed vlan list string
OctetStringr/w .1.3.6.1.4.1.57206.7.100.3.2.1.22
portComboMediaType
The media type of combo port
Enumerationr/w
Enumerated Values:
2phyModeCopperForced
4phyModeFiberForced
 .1.3.6.1.4.1.57206.7.100.3.2.1.31

stormControlTable

table
.1.3.6.1.4.1.57206.7.100.3.3 · 1 row entry · 5 columns
Open in standard view 
storm-contol table
stormControlEntry entry .1.3.6.1.4.1.57206.7.100.3.3.1
storm-control entry
Indexes
stormControlIndex stormControlType
Column Syntax OID
stormControlIndex
port index
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.57206.7.100.3.3.1.1
stormControlType
broadcast(broadcast rate suppression),multicast(multicast rate suppression),
unicast(unicast rate suppression),dlf(Destination Lookup Failure rate suppression),
brmc(broadcast and multicast rate suppression),brmcdlf(Bro…
Enumeration
Enumerated Values:
0broadcast
1multicast
2unicast
3dlf
4brmc
5brmcdlf
6all
 .1.3.6.1.4.1.57206.7.100.3.3.1.2
stormControlRate
the suppress rate.the value range at <1-1488095> or <1-1000000> on different devices.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.57206.7.100.3.3.1.3
stormControlStatus
Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry
Enumerationr/w
Enumerated Values:
0destroy
1active
 .1.3.6.1.4.1.57206.7.100.3.3.1.4
stormControlSuppressRateUnit
Suppress rate unit. Pps(1),kbps(2).
Enumerationr/w
Enumerated Values:
1pps
2kbps
 .1.3.6.1.4.1.57206.7.100.3.3.1.10

loopbackDetecCtrlTable

table
.1.3.6.1.4.1.57206.7.100.3.4.3 · 1 row entry · 2 columns
Open in standard view 
A table containing current configuration information for
the function of loopback detection control.
loopbackDetecCtrlEntry entry .1.3.6.1.4.1.57206.7.100.3.4.3.1
An entry in the loopback detection control table.
Indexes
lpbackDetecCtrlIndex
Column Syntax OID
lpbackDetecCtrlIndex
An unique value for each port.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.57206.7.100.3.4.3.1.1
lpbackDetecCtrlMode
Indicates the control type of the configuration of the loopback detection.
The default value is 1.
Enumerationr/w
Enumerated Values:
1shutdown
2block
 .1.3.6.1.4.1.57206.7.100.3.4.3.1.2

loopbackDetecShowTable

table
.1.3.6.1.4.1.57206.7.100.3.4.5 · 1 row entry · 2 columns
Open in standard view 
Show the config and state of loopback detection for the specified port.
loopbackDetecShowEntry entry .1.3.6.1.4.1.57206.7.100.3.4.5.1
An entry in the loopbackDetecShowTable.
Indexes
lpbackDetecShowPortIndex
Column Syntax OID
lpbackDetecShowPortIndex
An unique value for each port.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.57206.7.100.3.4.5.1.1
lpbackDetecShowInformation
The value display the configuration and state of loopback detection for the specified port.
OctetString
Constraints:
range: 1-1024
 .1.3.6.1.4.1.57206.7.100.3.4.5.1.2

loopbackDetectEnableTable

table
.1.3.6.1.4.1.57206.7.100.3.4.21 · 1 row entry · 2 columns
Open in standard view 
Loopback detection enable ports table.
loopbackDetectEnableEntry entry .1.3.6.1.4.1.57206.7.100.3.4.21.1
An entry in the loopbackDetectEnableTable.
Indexes
loopbackDetectEnableIndex
Column Syntax OID
loopbackDetectEnableIndex
An unique value for each port.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.57206.7.100.3.4.21.1.1
loopbackDetectEnablePort
Indicates the status of the loopback detection per port.
The default value is 0.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.57206.7.100.3.4.21.1.2

portClearCountTable

table
.1.3.6.1.4.1.57206.7.100.3.15 · 1 row entry · 2 columns
Open in standard view 
Clear port count table
portClearCountEntry entry .1.3.6.1.4.1.57206.7.100.3.15.1
Clear port count entry
Indexes
slotNum
Column Syntax OID
portClearCountAll
clear counters all
Enumerationr/w
Enumerated Values:
1clearCountAll
 .1.3.6.1.4.1.57206.7.100.3.15.1.1
portClearCountPortEth
clear counters port ethernet,for example: ge1
OctetStringr/w .1.3.6.1.4.1.57206.7.100.3.15.1.2

stormControlActionTable

table
.1.3.6.1.4.1.57206.7.100.3.20 · 1 row entry · 2 columns
Open in standard view 
storm-contol table
stormControlActionEntry entry .1.3.6.1.4.1.57206.7.100.3.20.1
A port entry containing storm control action status information
Indexes
stormControlActionIndex
Column Syntax OID
stormControlActionIndex
port index.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.57206.7.100.3.20.1.1
stormControlActionType
Type of action.Errdisable(1),log(2).
Integer32r/w
Constraints:
range: 1-2
 .1.3.6.1.4.1.57206.7.100.3.20.1.2

priIgmpSnoopingBindTable

table
.1.3.6.1.4.1.57206.7.100.8.3 · 1 row entry · 3 columns
Open in standard view 
IgmpSnoing bind configuration.
priIgmpSnoopingBindEntry entry .1.3.6.1.4.1.57206.7.100.8.3.1
IgmpSnooping bind configuration.
Indexes
priIgmpSnoopingVlanID priIgmpSnoopingGroupAddress
Column Syntax OID
priIgmpSnoopingVlanID
This value is vlan's ID.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.57206.7.100.8.3.1.1
priIgmpSnoopingGroupAddress
This value is group's ip address.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.57206.7.100.8.3.1.2
priIgmpSnoopingPortBitmap
Port's bitmap.
OctetString .1.3.6.1.4.1.57206.7.100.8.3.1.3

numAclGroupTable

table
.1.3.6.1.4.1.57206.7.100.10.1.3.1 · 1 row entry · 3 columns
Open in standard view 
this table is used for building a num-acl list.
numAclGroupEntry entry .1.3.6.1.4.1.57206.7.100.10.1.3.1.1
numAclGroup Table's Entry
Indexes
numAclGroupAclIndex
Column Syntax OID
numAclGroupAclIndex
the index of number acl,ip standard <1-99>,ip extern <100-199>,
ip standart expanded range <1300-1399>,ip extern expanded range <2000-2699>, mac-ip extern <3100-3199>
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.57206.7.100.10.1.3.1.1.1
numAclGroupStatus
the status of number acl.
Enumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
 .1.3.6.1.4.1.57206.7.100.10.1.3.1.1.4
numAclRemark
Acl remark.
OctetStringr/w
Constraints:
range: 100-100
 .1.3.6.1.4.1.57206.7.100.10.1.3.1.1.10

ipStandardAclTable

table
.1.3.6.1.4.1.57206.7.100.10.1.3.3 · 1 row entry · 6 columns
Open in standard view 
config ip Standard Acl
ipStandardAclEntry entry .1.3.6.1.4.1.57206.7.100.10.1.3.3.1
ip standard Table's Entry
Indexes
ipStandardIndex ipStandardSubIndex
Column Syntax OID
ipStandardIndex
The index of ip-standard-acl group.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.57206.7.100.10.1.3.3.1.1
ipStandardSubIndex
The index of ip-standard-acl rule.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.57206.7.100.10.1.3.3.1.2
ipStandardAct
The action of acl rule.
Enumerationr/w
Enumerated Values:
0deny
1permit
 .1.3.6.1.4.1.57206.7.100.10.1.3.3.1.4
ipStandardSrcIp
Source IP-address of basic acl rule.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.57206.7.100.10.1.3.3.1.5
ipStandardSrcIpWild
Source IP-address wild of basic acl rule.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.57206.7.100.10.1.3.3.1.6
ipStandardStatus
status of the ipStandardAclTable.
Enumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
 .1.3.6.1.4.1.57206.7.100.10.1.3.3.1.7

ipExternAclTable

table
.1.3.6.1.4.1.57206.7.100.10.1.3.4 · 1 row entry · 11 columns
Open in standard view 
ip extern Acl Table
ipExternAclEntry entry .1.3.6.1.4.1.57206.7.100.10.1.3.4.1
ip extern Table's Entry
Indexes
ipExternIndex ipExternSubIndex
Column Syntax OID
ipExternIndex
The index of ip-Extern-acl group .
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.57206.7.100.10.1.3.4.1.1
ipExternSubIndex
The index of ip-Extern-acl rule .
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.57206.7.100.10.1.3.4.1.2
ipExternAct
The action of acl rule.
Enumerationr/w
Enumerated Values:
0deny
1permit
 .1.3.6.1.4.1.57206.7.100.10.1.3.4.1.4
ipExternProtocol
The protocol number field in the IP header used to indicate
the higher layer protocol as specified in RFC 1700. A value
value of 65535 matches every IP packet.

For example :
1 is ICMP, 2 is IGMP, 4 is I…
Integer32r/w
Constraints:
range: 0-255
range: 65535-65535
 .1.3.6.1.4.1.57206.7.100.10.1.3.4.1.5
ipExternSrcIp
Source IP-address of advanced acl rule,for example 10.1.1.0 .
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.57206.7.100.10.1.3.4.1.6
ipExternSrcIpWild
Source IP-address wild of advanced acl rule,for example 0.0.0.255 .
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.57206.7.100.10.1.3.4.1.7
ipExternDstIp
Destination IP-address of advanced acl rule,for example 10.1.1.0 .
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.57206.7.100.10.1.3.4.1.8
ipExternDstIpWild
Destination IP-address wild of advanced acl rule,for example 0.0.0.255 .
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.57206.7.100.10.1.3.4.1.9
ipExternSrcPort1
The source port number of the TCP or UDP protocol.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.57206.7.100.10.1.3.4.1.12
ipExternDstPort1
The destination port number of the TCP or UDP protocol.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.57206.7.100.10.1.3.4.1.15
ipExternStatus
now state of the access-list.
Enumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
 .1.3.6.1.4.1.57206.7.100.10.1.3.4.1.17

macExternAclTable

table
.1.3.6.1.4.1.57206.7.100.10.1.3.6 · 1 row entry · 11 columns
Open in standard view 
mac extern Acl Table
macExternAclEntry entry .1.3.6.1.4.1.57206.7.100.10.1.3.6.1
mac extern Table's Entry
Indexes
macExternIndex macExternSubIndex
Column Syntax OID
macExternIndex
The index of Mac-Extern-acl group.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.57206.7.100.10.1.3.6.1.1
macExternSubIndex
The index of Mac-Extern-acl rule.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.57206.7.100.10.1.3.6.1.2
macExternAct
The action of acl rule.
Enumerationr/w
Enumerated Values:
0deny
1permit
 .1.3.6.1.4.1.57206.7.100.10.1.3.6.1.4
macExternSrcMac
Source Mac-address of advanced acl rule,for example :aaaa.aaaa.aaaa.
OctetStringr/w
Constraints:
range: 17-17
 .1.3.6.1.4.1.57206.7.100.10.1.3.6.1.5
macExternSrcMacWild
Source Mac-address's anti-mask of advanced acl rule,for example : ff-ff-ff-ff-00-00.
OctetStringr/w
Constraints:
range: 17-17
 .1.3.6.1.4.1.57206.7.100.10.1.3.6.1.6
macExternDstMac
Destination Mac-address of advanced acl rule,for example :aaaa.aaaa.aaaa.
OctetStringr/w
Constraints:
range: 17-17
 .1.3.6.1.4.1.57206.7.100.10.1.3.6.1.7
macExternDstMacWild
Destination Mac-address's anti-mask of advanced acl rule,for example : ff-ff-ff-ff-00-00.
OctetStringr/w
Constraints:
range: 17-17
 .1.3.6.1.4.1.57206.7.100.10.1.3.6.1.8
macExternEtherType
Value of the ethertype
Integer32r/w
Constraints:
range: 1536-65535
 .1.3.6.1.4.1.57206.7.100.10.1.3.6.1.10
macExternCos
value of the cos
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.57206.7.100.10.1.3.6.1.12
macExternVlanId
vlan id
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.57206.7.100.10.1.3.6.1.14
macExternStatus
now state of the access-list.
Enumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
 .1.3.6.1.4.1.57206.7.100.10.1.3.6.1.16

macIpExternAclTable

table
.1.3.6.1.4.1.57206.7.100.10.1.3.9 · 1 row entry · 20 columns
Open in standard view 
mac-ip extern Acl Table
macIpExternAclEntry entry .1.3.6.1.4.1.57206.7.100.10.1.3.9.1
mac-ip extern Table's Entry
Indexes
macIpExternIndex macIpExternSubIndex
Column Syntax OID
macIpExternIndex
The index of macIp-Extern-acl group .
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.57206.7.100.10.1.3.9.1.1
macIpExternSubIndex
The index of macIp-Extern-acl rule .
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.57206.7.100.10.1.3.9.1.2
macIpExternAct
The action of acl rule.
Enumerationr/w
Enumerated Values:
0deny
1permit
 .1.3.6.1.4.1.57206.7.100.10.1.3.9.1.4
macIpExternProtocol
The protocol number field in the IP header used to indicate
the higher layer protocol as specified in RFC 1700. A value
value of 65535 matches every IP packet.

For example :
1 is ICMP, 2 is IGMP, 4 is I…
Integer32r/w
Constraints:
range: 0-255
range: 65535-65535
 .1.3.6.1.4.1.57206.7.100.10.1.3.9.1.5
macIpExternSrcMac
Source Mac-address of advanced acl rule, for example: aa:aa:aa:aa:aa:aa.
OctetStringr/w
Constraints:
range: 17-17
 .1.3.6.1.4.1.57206.7.100.10.1.3.9.1.6
macIpExternSrcMacWild
Source Mac-address's anti-mask of advanced acl rule,for example : ff-ff-ff-ff-00-00.
OctetStringr/w
Constraints:
range: 17-17
 .1.3.6.1.4.1.57206.7.100.10.1.3.9.1.7
macIpExternDstMac
Destination Mac-address of advanced acl rule,for example :aa:aa:aa:aa:aa:aa.
OctetStringr/w
Constraints:
range: 17-17
 .1.3.6.1.4.1.57206.7.100.10.1.3.9.1.8
macIpExternDstMacWild
Destination Mac-address's anti-mask of advanced acl rule,for example : ff-ff-ff-ff-00-00.
OctetStringr/w
Constraints:
range: 17-17
 .1.3.6.1.4.1.57206.7.100.10.1.3.9.1.9
macIpExternSrcIp
Source IP-address of advanced acl rule,for example 10.1.1.0 .
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.57206.7.100.10.1.3.9.1.10
macIpExternSrcIpWild
Source IP-address wild of advanced acl rule,for example 0.0.0.255 .
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.57206.7.100.10.1.3.9.1.11
macIpExternDstIp
Destination IP-address of advanced acl rule,for example 10.1.1.0 .
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.57206.7.100.10.1.3.9.1.12
macIpExternDstIpWild
Destination IP-address wild of advanced acl rule,for example 0.0.0.255 .
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.57206.7.100.10.1.3.9.1.13
macIpExternSrcPort1
The source port number of the TCP or UDP protocol.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.57206.7.100.10.1.3.9.1.16
macIpExternDstPort1
The destination port number of the TCP or UDP protocol.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.57206.7.100.10.1.3.9.1.19
macIpExternPrecedence
The precedence of macIp-Extern-acl .
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.57206.7.100.10.1.3.9.1.21
macIpExternStatus
state of the access-list.
Enumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
 .1.3.6.1.4.1.57206.7.100.10.1.3.9.1.23
macIpExternVlanId
The vlan Id
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.57206.7.100.10.1.3.9.1.24
macIpExternDscp
Dscp
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.57206.7.100.10.1.3.9.1.40
macIpExternCos
Cos
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.57206.7.100.10.1.3.9.1.41
macIpExternEtherType
Value of the ethertype
Integer32r/w
Constraints:
range: 1536-65535
 .1.3.6.1.4.1.57206.7.100.10.1.3.9.1.50

aclActiveTable

table
.1.3.6.1.4.1.57206.7.100.10.1.4.1 · 1 row entry · 6 columns
Open in standard view 
bind  Acl in port or vlan.
aclActiveEntry entry .1.3.6.1.4.1.57206.7.100.10.1.4.1.1
Entry for aclActiveTable
Indexes
aclActiveBindType aclActiveIndex aclActiveType aclActiveDirection
Column Syntax OID
aclActiveBindType
point out the type of position of the bind-acl.
Enumeration
Enumerated Values:
0port
1vlan
 .1.3.6.1.4.1.57206.7.100.10.1.4.1.1.1
aclActiveIndex
The value of port id or vlan id .
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.57206.7.100.10.1.4.1.1.2
aclActiveType
the type of acl.
Enumeration
Enumerated Values:
1ip
5mac
8macIp
 .1.3.6.1.4.1.57206.7.100.10.1.4.1.1.3
aclActiveDirection
the direction of a binding acl.
Enumeration
Enumerated Values:
1in
 .1.3.6.1.4.1.57206.7.100.10.1.4.1.1.4
aclActiveAclIndex
the value of acl index,you have configured in aclNumAccessGroupTable
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.57206.7.100.10.1.4.1.1.5
aclActiveStatus
access or delete the bind-acl.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.57206.7.100.10.1.4.1.1.7

amPortInfoTable

table
.1.3.6.1.4.1.57206.7.100.10.4.2 · 1 row entry · 7 columns
Open in standard view 
Access Management information list of port.
amPortInfoEntry entry .1.3.6.1.4.1.57206.7.100.10.4.2.1
Indexes
amPortIndex amPortIp
Column Syntax OID
amPortIndex
port index
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.57206.7.100.10.4.2.1.1
amPortEnable
Enable or disable the Access Management on the port.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.57206.7.100.10.4.2.1.2
amPortForwardingType
Access Management forwarding type.
Enumerationr/w
Enumerated Values:
1ip-pool
2mac-ip-pool
 .1.3.6.1.4.1.57206.7.100.10.4.2.1.3
amPortIp
IP address of Access Management.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.57206.7.100.10.4.2.1.4
amPortMac
Mac address of Access Management.
MacAddressr/w
Textual Convention: MacAddress OctetString
Type Constraints:
range: 17
 .1.3.6.1.4.1.57206.7.100.10.4.2.1.5
amPortCount
Seriate IP address number.
Integer32r/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.57206.7.100.10.4.2.1.6
amPortStatus Enumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
 .1.3.6.1.4.1.57206.7.100.10.4.2.1.7

amPortStateTable

table
.1.3.6.1.4.1.57206.7.100.10.4.3 · 1 row entry · 3 columns
Open in standard view 
Access Management information list of port am..
amPortStateEntry entry .1.3.6.1.4.1.57206.7.100.10.4.3.1
entry for port am information.
Indexes
amIfIndex
Column Syntax OID
amIfIndex
interface NO.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.57206.7.100.10.4.3.1.1
amIfName
interface name.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.57206.7.100.10.4.3.1.2
amIfState
1:Enable;0:Disable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.57206.7.100.10.4.3.1.3

dhcpSnoopingPortConfigTable

table
.1.3.6.1.4.1.57206.7.100.13.3.17 · 1 row entry · 4 columns
Open in standard view 
After enable the dhcp snooping function, the administrator can configure the port information.
dhcpSnoopingPortConfigEntry entry .1.3.6.1.4.1.57206.7.100.13.3.17.1
A conceptual row of dhcpSnoopingPortConfigTable.
Indexes
dhcpSnoopingPortIndex
Column Syntax OID
dhcpSnoopingPortIndex
Configure the dhcp snooping function on the specified port.
Integer32
Constraints:
range: 0-1024
 .1.3.6.1.4.1.57206.7.100.13.3.17.1.1
dhcpSnoopingUserControlMaxNum
Configure the maximum of the binding users on a port, the range of binding users number is
0-254,the default number is 254.
Integer32r/w
Constraints:
range: 0-1024
 .1.3.6.1.4.1.57206.7.100.13.3.17.1.2
dhcpSnoopingUserControl
If set(0), not enable the user control function on a specified port,
if set(1), enable the user control function on a specified port,
the default value is set(0).
Enumerationr/w
Enumerated Values:
0notEnable
1enable
 .1.3.6.1.4.1.57206.7.100.13.3.17.1.3
dhcpSnoopingTrust
Configure trust function on a port or vlan list string.If input the string 'all', then trust
all the vlan. If input the string '1-2', then only trust the DHCP packets with that
vlan ID is 1 or 2. If input string '…
OctetStringr/w .1.3.6.1.4.1.57206.7.100.13.3.17.1.4

dcscmdcAclTable

table
.1.3.6.1.4.1.57206.7.100.20.2 · 1 row entry · 5 columns
Open in standard view 
dcscm dst control multicast
dcscmdcAclEntry entry .1.3.6.1.4.1.57206.7.100.20.2.1
dcscm dst control multicast entry
Indexes
dcscmdcAclNumber dcscmdcAclSubNumber
Column Syntax OID
dcscmdcAclNumber
Acl number of Dcscm destination control multicast,the range is 6000-7999.
Integer32r/w
Constraints:
range: 6000-7999
 .1.3.6.1.4.1.57206.7.100.20.2.1.1
dcscmdcAclSubNumber
Acl sub number of Dcscm destination control multicast,the range is <1-2147483645>.
Integer32r/w
Constraints:
range: 1-2147483645
 .1.3.6.1.4.1.57206.7.100.20.2.1.2
dcscmdcAclDestinationIp
Destination IP-address of multicast destination control acl rule.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.57206.7.100.20.2.1.5
dcscmdcAclDestinationMask
Destination Mask of acl entry. the destination mask should meet the request of muticast group address.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.57206.7.100.20.2.1.6
dcscmdcAclPermitOrDeny
acl entry permit or deny ; 0:deny; 1:permit; 2:del this acl entry
Enumerationr/w
Enumerated Values:
0deny
1permit
2deltheAcl
 .1.3.6.1.4.1.57206.7.100.20.2.1.7

dcscmdcPortbindingTable

table
.1.3.6.1.4.1.57206.7.100.20.5 · 1 row entry · 2 columns
Open in standard view 
dcscm destination control multicast, Acl is binded to Port
dcscmdcPortbindingEntry entry .1.3.6.1.4.1.57206.7.100.20.5.1
The index of this table is PortName
Indexes
dcscmdcPortbindingPortName
Column Syntax OID
dcscmdcPortbindingPortName
Dcscm destination control multicast,The Port index of rule
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.57206.7.100.20.5.1.1
dcscmdcPortbindingAclNumber
Dcscm destination control multicast,The Acl number of rule;0 means del the rule binded to port
Integer32r/w
Constraints:
range: 0-0
range: 6000-7999
 .1.3.6.1.4.1.57206.7.100.20.5.1.2

poePortConfigTable

table
.1.3.6.1.4.1.57206.7.100.26.10 · 1 row entry · 6 columns
Open in standard view 
The power inline port configuration table
poePortConfigEntry entry .1.3.6.1.4.1.57206.7.100.26.10.1
The power inline configuration in port.
Indexes
portIndex
Column Syntax OID
poePortStatus
The power inline port switch. Enable expresses it is turned on, while disable indicates that off.
Enumeration
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.57206.7.100.26.10.1.2
poePortPriority
The power inline port priority.
Enumeration
Enumerated Values:
0critical
1high
2low
 .1.3.6.1.4.1.57206.7.100.26.10.1.3
poePortCurrentPower
The power inline port used power. It is a real time value.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.57206.7.100.26.10.1.5
poePortCurrentCurrent
The power inline port export current. It is a real time value.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.57206.7.100.26.10.1.6
poePortCurrentVoltage
The power inline port export voltage. It is a real time value.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.57206.7.100.26.10.1.7
poePortPdClass
The connected PD class of power inline
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.57206.7.100.26.10.1.9

ddmTranscDiagnosisTable

table
.1.3.6.1.4.1.57206.7.100.30.1 · 1 row entry · 26 columns
Open in standard view 
A list of  ddm transceiver diagnosis information.
ddmTranscDiagnosisEntry entry .1.3.6.1.4.1.57206.7.100.30.1.1
entry for ddm transceiver diagnosis information.
Indexes
ddmDiagnosisIfIndex
Column Syntax OID
ddmDiagnosisIfIndex
interface NO.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.57206.7.100.30.1.1.1
ddmDiagnosisTemperature
current Temperature of the port,and the unit is C.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.57206.7.100.30.1.1.2
ddmDiagTempHighAlarmThreshold
High alarm threshold of Temperature.
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.57206.7.100.30.1.1.3
ddmDiagTempLowAlarmThreshold
Low alarm threshold of Temperature.
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.57206.7.100.30.1.1.4
ddmDiagTempHighWarnThreshold
High warn threshold of Temperature.
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.57206.7.100.30.1.1.5
ddmDiagTempLowWarnThreshold
Low warn threshold of Temperature.
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.57206.7.100.30.1.1.6
ddmDiagnosisVoltage
voltage of the port,and the unit is V.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.57206.7.100.30.1.1.7
ddmDiagVoltHighAlarmThreshold
High alarm threshold of Voltage.
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.57206.7.100.30.1.1.8
ddmDiagVoltLowAlarmThreshold
Low alarm threshold of Voltage.
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.57206.7.100.30.1.1.9
ddmDiagVoltHighWarnThreshold
High warn threshold of Voltage.
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.57206.7.100.30.1.1.10
ddmDiagVoltLowWarnThreshold
Low warn threshold of Voltage.
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.57206.7.100.30.1.1.11
ddmDiagnosisBias
bias of the port,the unit is mA.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.57206.7.100.30.1.1.12
ddmDiagBiasHighAlarmThreshold
High alarm threshold of Bias.
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.57206.7.100.30.1.1.13
ddmDiagBiasLowAlarmThreshold
Low alarm threshold of Bias.
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.57206.7.100.30.1.1.14
ddmDiagBiasHighWarnThreshold
High warn threshold of Bias.
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.57206.7.100.30.1.1.15
ddmDiagBiasLowWarnThreshold
Low warn threshold of Bias.
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.57206.7.100.30.1.1.16
ddmDiagnosisRXPower
RXPower of the port,and the unit is dBM,if the value of RXPower is infinitesimal,then set it to '-'.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.57206.7.100.30.1.1.17
ddmDiagRXPowerHighAlarmThreshold
High alarm threshold of RXPower.
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.57206.7.100.30.1.1.18
ddmDiagRXPowerLowAlarmThreshold
Low alarm threshold of RXPower.
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.57206.7.100.30.1.1.19
ddmDiagRXPowerHighWarnThreshold
High warn threshold of RXPower.
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.57206.7.100.30.1.1.20
ddmDiagRXPowerLowWarnThreshold
Low warn threshold of RXPower.
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.57206.7.100.30.1.1.21
ddmDiagnosisTXPower
TXPower of the port,and the unit is dBM,if the value of TXPoweris infinitesimal,then set it to '-'.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.57206.7.100.30.1.1.22
ddmDiagTXPowerHighAlarmThreshold
High alarm threshold of TXPower.
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.57206.7.100.30.1.1.23
ddmDiagTXPowerLowAlarmThreshold
k=Low alarm threshold of TXPower.
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.57206.7.100.30.1.1.24
ddmDiagTXPowerHighWarnThreshold
High warn threshold of TXPower.
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.57206.7.100.30.1.1.25
ddmDiagTXPowerLowWarnThreshold
Low warn threshold of TXPower.
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.57206.7.100.30.1.1.26

ddmTranscBasicInfoTable

table
.1.3.6.1.4.1.57206.7.100.30.3 · 1 row entry · 8 columns
Open in standard view 
Basic info of  ddm transceiver alarm information.
ddmTranscBasicInfoEntry entry .1.3.6.1.4.1.57206.7.100.30.3.1
entry for ddm transceiver basic information.
Indexes
ddmDiagnosisIfIndex
Column Syntax OID
ddmTransSerialIndex
ddm Trans Serial Index .
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.57206.7.100.30.3.1.1
ddmTransSerialName
ddm Trans Serial Name.
OctetString
Constraints:
range: 0-512
 .1.3.6.1.4.1.57206.7.100.30.3.1.2
ddmTransSerialNo
ddm transceiver Serial number.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.57206.7.100.30.3.1.3
ddmTransSerialVendorName
ddm transceiver Vendor Name.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.57206.7.100.30.3.1.4
ddmTransSerialModelName
ddm transceiver Model Name:SFP,SFP+,QSFP+,QSFP,XFP,etc.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.57206.7.100.30.3.1.5
ddmTransSerialTypeName
ddm transceiver Type Name:1000BASE-T,10GBASE-LR,etc.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.57206.7.100.30.3.1.6
ddmTransSerialBitRate
ddm transceiver bit rate:1300Mbit/s,10300Mbit/s,etc.
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.57206.7.100.30.3.1.7
ddmTransSerialWaveLength
ddm transceiver Wave Length:1310nm,etc.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.57206.7.100.30.3.1.8

newPortSecurityTable

table
.1.3.6.1.4.1.57206.7.100.32.1 · 1 row entry · 4 columns
Open in standard view 
The Port Security information table.
newPortSecurityEntry entry .1.3.6.1.4.1.57206.7.100.32.1.1
The index of this table is port index.
Indexes
portSecurityPortIndex
Column Syntax OID
portSecurityPortIndex
Secure Port Index.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.57206.7.100.32.1.1.1
portSecurityState
enable or disable port security on this port.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.57206.7.100.32.1.1.2
portSecurityMaxMacNum
The maximum number of security mac can be set or learned on the secure port.
Integer32r/w
Constraints:
range: 0-4096
 .1.3.6.1.4.1.57206.7.100.32.1.1.4
portSecurityVioMode
The violation mode of secure port mac count reach the threshold.The default mode is shutdown,if you want to disable violation mode,you can
config shutdown mode.
Enumerationr/w
Enumerated Values:
1protect
2restrict
3shutdown
 .1.3.6.1.4.1.57206.7.100.32.1.1.10

macNotificationIfConfigTable

table
.1.3.6.1.4.1.57206.7.100.33.1.2.1 · 1 row entry · 2 columns
Open in standard view 
This table enables or disables the generation of notification
at each interface when MAC address is learnt or removed.
macNotificationIfConfigEntry entry .1.3.6.1.4.1.57206.7.100.33.1.2.1.1
Each entry contains the configuration for enabling the
MAC notification at each interface that supports this
feature.
Indexes
portIndex
Column Syntax OID
macNotificationMacAddrLearntEnable
Indicates whether this interface is enabled to send
macNotificationMacChangedNotification when it learns a new MAC address. This
variable has no effect when the value of macNotificationGlobalFeatureEnabled
object is fa…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.57206.7.100.33.1.2.1.1.1
macNotificationMacAddrRemovedEnable
Indicates whether this interface is enabled to send
macNotificationMacChangedNotification when a MAC address which it learnt
previously is removed from the forwarding table. This variable
has no effect when the value o…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.57206.7.100.33.1.2.1.1.2

isolatePortCfgTable

table
.1.3.6.1.4.1.57206.7.100.100.1 · 1 row entry · 2 columns
Open in standard view 
The Port Security information table.
isolatePortCfgEntry entry .1.3.6.1.4.1.57206.7.100.100.1.1
Isolate-port information entry.
Indexes
isolatePortCfgIndex
Column Syntax OID
isolatePortCfgIndex
An unique value for each port.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.57206.7.100.100.1.1.1
isolatePortCfgPorts
It specifies the ports indexes to which traffic is prohibited from being sent.
Example: 5001 5002 5003 . Set empty value to remove OID.
DisplayStringr/w
Textual Convention: DisplayString OctetString
 .1.3.6.1.4.1.57206.7.100.100.1.1.2