MX-TELIF-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
8
Rows
8
Columns
34
.0.1775.1.200.100.300
·
1 row entry
·
4 columns
Specific User Gain
This table allows to configure the user gain for a specific
interface. All interfaces have the default configuration
unless the EnableConfig parameter is enabled.
A row in table Specific User Gain.
Indexes
specificCountryCustomizationUserGainInterfaceId
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
specificCountryCustomizationUserGainInterfaceId
Interface Identifier
String that identifies a interface in other tables. |
OctetString | .0.1775.1.200.100.300.1.100 |
||||
|
specificCountryCustomizationUserGainEnableConfig
Enable Configuration
Defines the configuration to use for a specific interface. * Disable: The interface uses the default configuration as defined in the DefaultCountryCustomizati… |
MX-TCMxEnableStater/w Textual Convention: MX-TCMxEnableState EnumerationType Values:
|
.0.1775.1.200.100.300.1.200 |
||||
|
specificCountryCustomizationUserGainInputOffset
Specific User Input Gain Offset
The user input gain offset is added to the base input gain to compute the total input gain on this specific telephony interface. The user input gain is in dB. … |
Integer32r/w Constraints: range: -12-12 |
.0.1775.1.200.100.300.1.300 |
||||
|
specificCountryCustomizationUserGainOutputOffset
Specific User Output Gain Offset
The user output gain offset is added to the base output gain to compute the total output gain on this specific telephony interface. The user output gain is in dB. … |
Integer32r/w Constraints: range: -12-12 |
.0.1775.1.200.100.300.1.400 |
.0.1775.1.200.400.400
·
1 row entry
·
7 columns
Specific Country Override Dialing.
This table allows to override the default country dialing
configuration for a specific interface. All interfaces have
the default configuration unless the EnableConfig parameter is
enabled.
A row in table Specific Country Override Dialing..
Indexes
specificCountryCustomizationDialingInterfaceId
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
specificCountryCustomizationDialingInterfaceId
Interface Identifier
String that identifies a Interface in other tables. |
OctetString | .0.1775.1.200.400.400.1.100 |
||||
|
specificCountryCustomizationDialingEnableConfig
Enable Configuration
Defines the configuration to use for a specific interface. * Disable: The interface uses the default configuration as defined in the DefaultCountryCustomizationDi… |
MX-TCMxEnableStater/w Textual Convention: MX-TCMxEnableState EnumerationType Values:
|
.0.1775.1.200.400.400.1.200 |
||||
|
specificCountryCustomizationDialingOverride
Specific Override Dialing Country Configuration
Allows to override the default country dialing setting. * Disable: The interface uses the default country dialing setting. * Enable: … |
MX-TCMxEnableStater/w Textual Convention: MX-TCMxEnableState EnumerationType Values:
|
.0.1775.1.200.400.400.1.300 |
||||
|
specificCountryCustomizationDialingInterDtmfDialDelay
Specific Delay Between Dialed DTMF
The delay between two DTMFs when dialing on the interface. This value is expressed in milliseconds (ms). This configuration is used only if… |
Unsigned32r/w Constraints: range: 50-600 |
.0.1775.1.200.400.400.1.400 |
||||
|
specificCountryCustomizationDialingDtmfDuration
Specific Dialed DTMF Duration
The duration of a DTMF when dialing on the interface. This value is expressed in milliseconds (ms). This configuration is used only if the Overr… |
Unsigned32r/w Constraints: range: 50-600 |
.0.1775.1.200.400.400.1.500 |
||||
|
specificCountryCustomizationDialingInterMfR1DialDelay
Specific Delay Between Dialed MFR1
The delay between two MFR1s when dialing on the interface. This value is expressed in milliseconds (ms). This configuration is used only if… |
Unsigned32r/w Constraints: range: 50-600 |
.0.1775.1.200.400.400.1.600 |
||||
|
specificCountryCustomizationDialingMfR1Duration
Specific Dialed MFR1 Duration
The duration of a MFR1 when dialing on the interface. This value is expressed in milliseconds (ms). This configuration is used only if the Overr… |
Unsigned32r/w Constraints: range: 50-600 |
.0.1775.1.200.400.400.1.700 |
countryToneStatusTable
table.0.1775.1.200.500.100
·
1 row entry
·
2 columns
Country Tone Status
This table displays the current tone pattern used (depends on
the CountrySelection parameter and the
CountryCustomizationTone table). The configuration applies to
all interfaces.
A row in table Country Tone Status.
Indexes
countryToneStatusTone
| Column | Syntax | OID | ||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
countryToneStatusTone
Tone
Tone. |
Enumeration Enumerated Values:
|
.0.1775.1.200.500.100.1.100 |
||||||||||||||||||||||||||||
|
countryToneStatusPattern
Pattern
Pattern description of the currently used tone. See the CountryCustomizationTone.Pattern parameter for a description of the syntax. |
OctetString Constraints: range: 0-512 |
.0.1775.1.200.500.100.1.300 |
.0.1775.1.200.500.200
·
1 row entry
·
3 columns
Country Customisation Tone
This table allows to override the default country tone
configuration. The configuration applies to all interfaces.
A row in table Country Customisation Tone.
Indexes
countryCustomizationToneTone
| Column | Syntax | OID | ||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
countryCustomizationToneTone
Tone
Tone to customise. |
Enumeration Enumerated Values:
|
.0.1775.1.200.500.200.1.100 |
||||||||||||||||||||||||||||
|
countryCustomizationToneOverride
Override Tone Country Configuration
Allows to override the default country tone setting. * Disable: The unit uses the default country dialing setting. * Enable: The unit uses the to… |
MX-TCMxEnableStater/w Textual Convention: MX-TCMxEnableState EnumerationType Values:
|
.0.1775.1.200.500.200.1.200 |
||||||||||||||||||||||||||||
|
countryCustomizationTonePattern
Pattern
Describes a tone pattern. A tone description contains frequencies, states and loops. Up to 4 frequencies (f1 to f4) each with a power level can be defined. At least one frequency/po… |
OctetStringr/w Constraints: range: 0-512 |
.0.1775.1.200.500.200.1.300 |
.0.1775.1.300.200
·
1 row entry
·
6 columns
Specific Voice Codec Configuration
specific configuration.
A row in table Specific Voice Codec Configuration .
Indexes
specificMachineDetectionInterfaceId
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
specificMachineDetectionInterfaceId
Interface Identifier
String that identifies a interface in other tables. |
OctetString | .0.1775.1.300.200.1.100 |
||||
|
specificMachineDetectionEnableConfig
Enable Configuration
Defines the configuration to use for a specific interface. * Disable: The interface uses the default configuration as defined in the DefaultMachineDetectionCngTon… |
MX-TCMxEnableStater/w Textual Convention: MX-TCMxEnableState EnumerationType Values:
|
.0.1775.1.300.200.1.200 |
||||
|
specificMachineDetectionCngToneDetection
Specific Enable/Disable CNG Tone Detection
Enables fax calling tone (CNG tone) detection. * Enable: Upon recognition of the CNG tone, the unit switches the communication from voice mo… |
MX-TCMxEnableStater/w Textual Convention: MX-TCMxEnableState EnumerationType Values:
|
.0.1775.1.300.200.1.300 |
||||
|
specificMachineDetectionCedToneDetection
Specific Enable/Disable CED Tone Detection
Enables CED tone detection. * Enable: Upon recognition of the CED tone, the unit behaves as defined in DefaultMachineDetectionBehaviorOn… |
MX-TCMxEnableStater/w Textual Convention: MX-TCMxEnableState EnumerationType Values:
|
.0.1775.1.300.200.1.310 |
||||
|
specificMachineDetectionV21ModulationDetection
Specific Enable/Disable V.21 Modulation Detection
Enables fax V.21 modulation detection. * Enable: Upon recognition of the V.21 modulation tone, the unit switches the communication fr… |
MX-TCMxEnableStater/w Textual Convention: MX-TCMxEnableState EnumerationType Values:
|
.0.1775.1.300.200.1.320 |
||||
|
specificMachineDetectionBehaviorOnCedToneDetection
Specific CED Tone Detection Behavior
Defines the behavior of the unit upon detection of a CED tone. * Passthrough: In passthrough mode the CED tone does not trigger a transition from … |
Enumerationr/w Enumerated Values:
|
.0.1775.1.300.200.1.400 |
.0.1775.1.500.100
·
1 row entry
·
3 columns
Distinctive Call Waiting Tone
This table allows to override the default country call waiting
tone configuration. The configuration applies to all
interfaces.
A row in table Distinctive Call Waiting Tone.
Indexes
distinctiveCallWaitingToneIndex
| Column | Syntax | OID |
|---|---|---|
|
distinctiveCallWaitingToneIndex
Row Index
Unique identifier of the row in the table. |
Unsigned32 Constraints: range: 1-4 |
.0.1775.1.500.100.1.100 |
|
distinctiveCallWaitingToneToneId
Tone ID
Identification of the distinctive call waiting tone. When the ToneId parameter is defined and the incoming call property 'distinctive-ring' matches with it, the corresponding tone pattern is used.… |
OctetStringr/w Constraints: range: 0-512 |
.0.1775.1.500.100.1.200 |
|
distinctiveCallWaitingTonePattern
Pattern
Pattern description of the custom tone. See the CountryCustomizationTone.Pattern parameter for syntax description. Note that only two frequencies can be used by the C… |
OctetStringr/w Constraints: range: 0-512 |
.0.1775.1.500.100.1.300 |
.0.1775.1.50000.100
·
1 row entry
·
7 columns
DTMF Detection Configuration
DTMF Detection Configuration
A row in table DTMF Detection Configuration.
Indexes
interopDtmfDetectionInterfaceId
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
interopDtmfDetectionInterfaceId
Interface Identifier
String that identifies an interface in other tables. |
OctetString | .0.1775.1.50000.100.1.100 |
||||
|
interopDtmfDetectionRiseTimeCriteria
Rise Time Criteria
Defines how the Rise Time criteria should be configured for DTMF detection. * CheckSr: Enable the Step Rise criteria and disable the Confirm DTMF SNR criteria. * … |
Enumerationr/w Enumerated Values:
|
.0.1775.1.50000.100.1.200 |
||||
|
interopDtmfDetectionPositiveTwist
Malformed DTMF Detection Method
Defines the value for the Positive Twist DTMF detection parameter. When the high-group frequency of a DTMF is more powerful than the low-group frequency, the… |
Unsigned32r/w Constraints: range: 1-14 |
.0.1775.1.50000.100.1.300 |
||||
|
interopDtmfDetectionNegativeTwist
Malformed DTMF Detection Method
Defines the value for the Negative Twist DTMF detection parameter. When the low-group frequency of a DTMF is more powerful than the high-group frequency, the… |
Unsigned32r/w Constraints: range: 1-14 |
.0.1775.1.50000.100.1.350 |
||||
|
interopDtmfDetectionMaxPowerThreshold
Maximum power for dual-tone detection
The average power of a DTMF must be below the value set in this parameter to be no longer detected. Raising this value increases the sensitivity of the DTMF detection… |
Integer32r/w Constraints: range: -20-1 |
.0.1775.1.50000.100.1.400 |
||||
|
interopDtmfDetectionMinPowerThreshold
Minimum power for dual-tone detection
The average power of a DTMF must be above the value set in this parameter for at least 30ms to be detected. Raising this value reduces the sensitivity to DTMF detecti… |
Integer32r/w Constraints: range: -45--10 |
.0.1775.1.50000.100.1.450 |
||||
|
interopDtmfDetectionBreakPowerThreshold
Power threshold not to be exceeded when looking for break
detection When the average power of a DTMF falls below the value set in this parameter for at least 20ms, it is considered that the DTMF ended. … |
Integer32r/w Constraints: range: -45--12 |
.0.1775.1.50000.100.1.500 |
.0.1775.1.50000.200
·
1 row entry
·
2 columns
Start Call In VBD
Start Call In VBD
A row in table Start Call In VBD.
Indexes
interopStartCallInVbdInterfaceId
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
interopStartCallInVbdInterfaceId
Interface Identifier
String that identifies an interface in other tables. |
OctetString | .0.1775.1.50000.200.1.100 |
||||
|
interopStartCallInVbdEnable
Enable
Indicates whether or not a call should be started in voiceband data mode. * Disable: Call is started in voice mode. A fax/modem tone detection triggers a transition from voice … |
MX-TCMxEnableStater/w Textual Convention: MX-TCMxEnableState EnumerationType Values:
|
.0.1775.1.50000.200.1.200 |