This trap signifies that the SNMP entity, acting
in an agent role, is reinitializing itself and that its
configuration may have been altered.

This trap signifies that the SNMP entity, acting
in an agent role, is reinitializing itself such that its
configuration is unaltered.

A mrvPortLinkDown trap signifies that the SNMP entity, acting in
agent role, has detected that the ifOperStatus object for
of its communication links is about to enter the down
from some other state (but not from the notPresent).
This other state is indicated by the included value of ifOperStatus.

A mrvPortLinkUp trap signifies that the SNMP entity, acting in an
role, has detected that the ifOperStatus object for
of its communication links left the down state and
transitioned into some other state (but not into the
notPresent state). This other state is indicated by the
included value of ifOperStatus.

An authenticationFailure trap signifies that the SNMP
entity, acting in an agent role, has received a protocol
message that is not properly authenticated.  While all
implementations of the SNMP must be capable of generating
this trap, the snmpEnableAuthenTraps object indicates
whether this trap will be generated.

The SNMP trap that is generated when
power supply unit changes it's state from notActive to active

The SNMP trap that is generated when one of the Ports in the LOS Group
became Active.
For example: port A and port B are the members of the LOS Group while
port A is a primary port and port B is the secondary port.

The SNMP trap that is generated when Dependent ports
[mrvPortLinSlavePorts] Link State became Down as result of
link reflection only.
It should not be sent, when port became Down by
physical disconnection or CLI command 'port state disable' -
unlike standard LinkDown.
In the case of [mrvPortLinSymmetricStatus]='nonSymmetric'
the Dependent ports are indeed the LIN Slave ports.
But in the case of [mrvPortLinSymmetricStatus]='symmetric'
the Dependent ports list has only one port which can be
Master port or Slave port, because in this case these both
ports are equivalent.

The SNMP trap that is generated when Dependent ports 
[mrvPortLinSlavePorts] Link State became Up.
as result of link reflection only.
It should not be sent, when port became Up by 
physical connection or CLI command 'port state enable' -
unlike standard LinkUp.
In the case of [mrvPortLinSymmetricStatus]='nonSymmetric'
the Dependent ports are indeed the LIN Slave ports.
But in the case of [mrvPortLinSymmetricStatus]='symmetric'
the Dependent ports list has only one port which can be
Master port or Slave port, because in this case these both
ports are equivalent.

The SNMP trap that is generated when
power supply unit changes it's state from active to notActive

The SNMP trap that is generated when
FAN unit changes it's state from notActive to active

The SNMP trap that is generated when
FAN unit changes it's state from active to notActive

The SNMP trap that is generated when
Device Temperature changes it's state from High to Normal

The SNMP trap that is generated when
Device Temperature changes it's state from Normal to High

A MEP has a persistent defect condition. A notification
(fault alarm) is sent to the management entity with the OID
of the MEP that has detected the fault

A MEP has a persistent defect condition. A notification
(recovery alarm) is sent to the management entity with the OID
of the MEP that has detected the recovery after a fault.

The SNMP trap that is generated when one of the Ports in the LOS Group
became Active.
For example: port A and port B are the members of the LOS Group while
port A is a primary port and port B is the secondary port.