MITEL-PPPGROUP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
13

mitelPppGrpRemoteConfigTable

table
.1.3.6.1.4.1.1027.4.8.1.2.2 · 1 row entry · 5 columns
Open in standard view 
This table contains objects that pertain to the management of
remote LANs that use the PPP Internet standard link protocol.
mitelPppGrpRemoteConfigEntry entry .1.3.6.1.4.1.1027.4.8.1.2.2.1
A default entry at conceptual row zero does exist in this
table. The default entry can be used to specify the PPP
authentication protocol only.
Indexes
mitelRmtCfgTableIndex
Column Syntax OID
mitelRmtCfgTableIndex
This object uniquely identifies this object
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1027.4.8.1.2.2.1.1
mitelRmtCfgTableIpAddrHandling
This attribute determines wether the system can accept
or override the DNS IP address submitted by
a remote system. DEFAULT = accept.
Enumerationr/w
Enumerated Values:
1accept
2override
3assign
 .1.3.6.1.4.1.1027.4.8.1.2.2.1.2
mitelRmtCfgTableRemIpAddr
The IP address to assign to remote if mitelRmtCfgTableIPAddrHandling
is set to assign(3)
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.1027.4.8.1.2.2.1.3
mitelRmtCfgTableStatus
The current status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.1027.4.8.1.2.2.1.4
mitelRmtCfgTablePppMode
The mode PPP will be using for the given destination.
Enumerationr/w
Enumerated Values:
1client
2server
 .1.3.6.1.4.1.1027.4.8.1.2.2.1.5

mitelPppGrpPppOverEthernetTable

table
.1.3.6.1.4.1.1027.4.8.1.2.3 · 1 row entry · 8 columns
Open in standard view 
Table containing the configuration items needed by the
PPPoE stack.
mitelPppGrpPppOverEthernetEntry entry .1.3.6.1.4.1.1027.4.8.1.2.3.1
PPPoE information
Indexes
mitelPppOEthTableIndex
Column Syntax OID
mitelPppOEthTableIndex
Unique Identifier for an entry in PPP over Ethernet Table.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1027.4.8.1.2.3.1.1
mitelPppOEthTableEnabled
Is this PPPoE instance enabled or not.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.1027.4.8.1.2.3.1.2
mitelPppOEthTablePacketTimeout
The time to wait, in seconds, for a valid response to a
discovery packet before resending it.
Warning: this value is doubled ever time a packet is
resent.
Integer32r/w
Constraints:
range: 1-5
 .1.3.6.1.4.1.1027.4.8.1.2.3.1.3
mitelPppOEthTablePacketRetries
The number of times to resend discovery packets before
giving up on the negotiation.
Integer32r/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.1027.4.8.1.2.3.1.4
mitelPppOEthTableTotalRetries
The RFC states that failure to receive a valid PADS packet
should restart the negotiation. This count stops the system
retrying indefinitely on duff PADS packets by capping the
total number of retry attempts.
Integer32r/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.1027.4.8.1.2.3.1.5
mitelPppOEthTableServiceName
The service we wish to request from the remote access
concentrator. Examples of the use of the service name
are to indicate an ISP or a class or quality of
service.
An empty string indicates any service.
OctetStringr/w
Constraints:
range: 0-50
 .1.3.6.1.4.1.1027.4.8.1.2.3.1.6
mitelPppOEthTableACName
Description of the remote access concentrator we wish
to connect to.
An empty string indicates no preference.
OctetStringr/w
Constraints:
range: 0-50
 .1.3.6.1.4.1.1027.4.8.1.2.3.1.7
mitelPppOEthTableStatus
The entry's row status.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.1027.4.8.1.2.3.1.8