MICROSENS-G6-NOTIFICATION-MIB
Microsens private NOTIFICATION for Generation 6 Software Platform
microsens
1.3.6.1.4.1.3181
Imported Objects
| RFC-1215 | TRAP-TYPE |
| SNMPv2-SMI | enterprises Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString MacAddress |
Objects (21)
microsens
|
.1.3.6.1.4.1.3181 |
|
|
managedSwitches
|
.1.3.6.1.4.1.3181.10 |
|
|
g6
|
.1.3.6.1.4.1.3181.10.6 |
|
|
g6TrapGroup
|
.1.3.6.1.4.1.3181.10.6.1 |
|
|
g6Trap
|
.1.3.6.1.4.1.3181.10.6.1.1 |
|
|
g6TrapObjects
|
.1.3.6.1.4.1.3181.10.6.1.2 |
|
g6TrapObjEventName
|
SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.1.2.1 |
|
g6TrapObjDescription
|
SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.1.2.10 |
|
g6TrapObjMac
|
SNMPv2-TCMacAddress | .1.3.6.1.4.1.3181.10.6.1.2.11 |
|
g6TrapObjVlanId
|
Integer32 | .1.3.6.1.4.1.3181.10.6.1.2.12 |
|
g6TrapObjOfficeGroupName
|
SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.1.2.13 |
|
g6TrapObjAvgValue
|
SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.1.2.14 |
|
g6TrapObjTotalValue
|
SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.1.2.15 |
|
g6TrapObjGroupName
|
Enumeration | .1.3.6.1.4.1.3181.10.6.1.2.2 |
|
g6TrapObjRelevance
|
Enumeration | .1.3.6.1.4.1.3181.10.6.1.2.3 |
|
g6TrapObjSeverity
|
Enumeration | .1.3.6.1.4.1.3181.10.6.1.2.4 |
|
g6TrapObjSource
|
Enumeration | .1.3.6.1.4.1.3181.10.6.1.2.5 |
|
g6TrapObjSysName
|
SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.1.2.6 |
|
g6TrapObjPortId
|
Integer32 | .1.3.6.1.4.1.3181.10.6.1.2.7 |
|
g6TrapObjPortString
|
SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.1.2.8 |
|
g6TrapObjPortAlias
|
SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.1.2.9 |
Notifications / Traps (100)
| Name | OID | Description |
|---|---|---|
g6TrapFactoryReset
|
.1.3.6.1.4.1.3181.10.6.1.1.10 |
Configuration factory reset is executed via local push button on the device. |
|
g6TrapIncomingAlert
|
.1.3.6.1.4.1.3181.10.6.1.1.100 |
Externally received HTTP_GET_REQUEST or received SNMP TRAP. |
|
g6TrapCableTerminationEstablished
|
.1.3.6.1.4.1.3181.10.6.1.1.101 |
Cable termination established. Possible reason: A terminated remote device was connected to the cable. |
|
g6TrapCableTerminationLost
|
.1.3.6.1.4.1.3181.10.6.1.1.102 |
Cable termination lost. Possible reason: A terminated remote device was disconnected from the cable or the cable was locally unplugged. |
|
g6TrapTerminalServerConnected
|
.1.3.6.1.4.1.3181.10.6.1.1.103 |
Terminal server connected foreign host to local serial port. |
|
g6TrapTerminalServerDisconnected
|
.1.3.6.1.4.1.3181.10.6.1.1.104 |
Terminal server disconnected foreign host from local serial port. |
|
g6TrapTerminalServerFail
|
.1.3.6.1.4.1.3181.10.6.1.1.105 |
Terminal server failed in connecting foreign host to local serial port. |
|
g6TrapSensorGroupChange
|
.1.3.6.1.4.1.3181.10.6.1.1.108 |
Sensor group values have changed. |
|
g6TrapConfigurationLoaded
|
.1.3.6.1.4.1.3181.10.6.1.1.11 |
All or a specific configuration file(s) has been restored and activated. |
|
g6TrapActorGroupChangeRequest
|
.1.3.6.1.4.1.3181.10.6.1.1.110 |
Actor group is requested to change to a new value. |
|
g6TrapRegisterSmartDevice
|
.1.3.6.1.4.1.3181.10.6.1.1.111 |
A new smart device is registered. |
|
g6TrapUpdateSmartDevice
|
.1.3.6.1.4.1.3181.10.6.1.1.112 |
A smart device has changed its status. |
|
g6TrapRegisterSmartAttribute
|
.1.3.6.1.4.1.3181.10.6.1.1.115 |
A new smart attribute is registered. |
|
g6TrapUnregisterSmartDevice
|
.1.3.6.1.4.1.3181.10.6.1.1.117 |
A smart device is unregistered. |
|
g6TrapUnregisterSmartAttribute
|
.1.3.6.1.4.1.3181.10.6.1.1.118 |
A smart attribute is unregistered. |
|
g6TrapSingleActorChange
|
.1.3.6.1.4.1.3181.10.6.1.1.119 |
An individual actor is set to a new value. |
|
g6TrapChangeConfig
|
.1.3.6.1.4.1.3181.10.6.1.1.12 |
A configuration parameter has been modified and activated. |
|
g6TrapActorGroupChanged
|
.1.3.6.1.4.1.3181.10.6.1.1.120 |
An actor group has changed to a new value. |
|
g6TrapSmartOfficeInitializing
|
.1.3.6.1.4.1.3181.10.6.1.1.121 |
Smart Office is being initialized. |
|
g6TrapSmartOfficeStarted
|
.1.3.6.1.4.1.3181.10.6.1.1.122 |
Smart Office is started and ready. |
|
g6TrapSmartOfficeStopped
|
.1.3.6.1.4.1.3181.10.6.1.1.123 |
Smart Office is being stopped. |
|
g6TrapSmartOfficeError
|
.1.3.6.1.4.1.3181.10.6.1.1.124 |
A Smart Office error has occured. |
|
g6TrapOtdrMeasurements
|
.1.3.6.1.4.1.3181.10.6.1.1.125 |
An OTDR measurement has taken place and detected a change in the optical characteristics of the cable. |
|
g6TrapChangeOfflineConfig
|
.1.3.6.1.4.1.3181.10.6.1.1.13 |
An offline configuration parameter has been modified. The running system is not affected. |
|
g6TrapActionResponse
|
.1.3.6.1.4.1.3181.10.6.1.1.14 |
Not a customer event. Contains the reponse string to an action command. |
|
g6TrapCommitConfig
|
.1.3.6.1.4.1.3181.10.6.1.1.15 |
Not a customer event. Recent configuration changes should now be stored and activated. |
|
g6TrapPowerSupplyOk
|
.1.3.6.1.4.1.3181.10.6.1.1.16 |
Power supply has been restored. Applies to units with redundant supplies only. |
|
g6TrapPowerSupplyFail
|
.1.3.6.1.4.1.3181.10.6.1.1.17 |
Power supply has FAILED. Applies to units with redundant supplies only. |
|
g6TrapLogin
|
.1.3.6.1.4.1.3181.10.6.1.1.18 |
An operator has logged onto the system. |
|
g6TrapLogout
|
.1.3.6.1.4.1.3181.10.6.1.1.19 |
An operator has logged off from the system. |
|
g6TrapLoginAttempt
|
.1.3.6.1.4.1.3181.10.6.1.1.20 |
An operator login has failed due to invalid login or password. |
|
g6TrapLinkUp
|
.1.3.6.1.4.1.3181.10.6.1.1.21 |
A port has gone online and is ready to transport data. |
|
g6TrapLinkDown
|
.1.3.6.1.4.1.3181.10.6.1.1.22 |
A port has gone down. Data transport on this port is no longer possible. |
|
g6TrapRingNormal
|
.1.3.6.1.4.1.3181.10.6.1.1.23 |
A ring is back to normal operation. Protection is available. |
|
g6TrapRingBackup
|
.1.3.6.1.4.1.3181.10.6.1.1.24 |
A ring has switched to the redundant backup path. |
|
g6TrapRingFailure
|
.1.3.6.1.4.1.3181.10.6.1.1.25 |
A ring has FAILED. Normal and backup path are unavailable. |
|
g6TrapCouplingState
|
.1.3.6.1.4.1.3181.10.6.1.1.26 |
Coupling controller state change. |
|
g6TrapTemperatureOk
|
.1.3.6.1.4.1.3181.10.6.1.1.27 |
Operating temperature is within acceptable limits. |
|
g6TrapTemperatureWarning
|
.1.3.6.1.4.1.3181.10.6.1.1.28 |
Operating temperature is low or high. Performance my be degraded. Do not run under this condition for prolonged time. |
|
g6TrapTemperatureFailure
|
.1.3.6.1.4.1.3181.10.6.1.1.29 |
Operating temperature is too low or too high. The unit may switch itself off to protect itself anytime soon. |
|
g6TrapDebug
|
.1.3.6.1.4.1.3181.10.6.1.1.3 |
Internal Debug Messages. |
|
g6TrapMacAccepted
|
.1.3.6.1.4.1.3181.10.6.1.1.30 |
A MAC address has been authorized. |
|
g6TrapMacAuthError
|
.1.3.6.1.4.1.3181.10.6.1.1.31 |
MAC authorization error. |
|
g6TrapMacBlocked
|
.1.3.6.1.4.1.3181.10.6.1.1.32 |
A MAC address has been blocked. |
|
g6TrapMacBlockedVlan
|
.1.3.6.1.4.1.3181.10.6.1.1.33 |
A MAC address has been blocked. Assigned to unauthorized VLAN. |
|
g6TrapMacDisconnected
|
.1.3.6.1.4.1.3181.10.6.1.1.34 |
A MAC address has been disconnected. |
|
g6TrapSfpInserted
|
.1.3.6.1.4.1.3181.10.6.1.1.35 |
An SFP (pluggable optical or electrical port module) has been inserted. |
|
g6TrapSfpRemoved
|
.1.3.6.1.4.1.3181.10.6.1.1.36 |
An SFP (pluggable optical or electrical port module) has been removed from the device. |
|
g6TrapSfpSignalPresent
|
.1.3.6.1.4.1.3181.10.6.1.1.37 |
An SFP (pluggable optical or electrical port module) has detected an optical receive signal. |
|
g6TrapSfpSignalLoss
|
.1.3.6.1.4.1.3181.10.6.1.1.38 |
An SFP (pluggable optical or electrical port module) has lost its receive signal. |
|
g6TrapSfpSignalChange
|
.1.3.6.1.4.1.3181.10.6.1.1.39 |
An SFP (pluggable optical or electrical port module) has detected a change in the optical input power level. |
|
g6TrapAliveTest
|
.1.3.6.1.4.1.3181.10.6.1.1.4 |
Can be used to check out event and notification system with no effect to the system operation. |
|
g6TrapSfpMismatch
|
.1.3.6.1.4.1.3181.10.6.1.1.40 |
An SFP (pluggable optical or electrical port module) has been inserted which does not match the required feature(s). |
|
g6TrapPoeConnect
|
.1.3.6.1.4.1.3181.10.6.1.1.41 |
A POE (Power over Ethernet) device is connected an powered. |
|
g6TrapPoeVoltage
|
.1.3.6.1.4.1.3181.10.6.1.1.42 |
The POE (Power over Ethernet) operating voltage is too low. |
|
g6TrapPoeError
|
.1.3.6.1.4.1.3181.10.6.1.1.43 |
A POE (Power over Ethernet) error has occurred. |
|
g6TrapPoeClassmismatch
|
.1.3.6.1.4.1.3181.10.6.1.1.44 |
A POE (Power over Ethernet) powered device requires a power level not enabled or available at this port. |
|
g6TrapPoeDisconnect
|
.1.3.6.1.4.1.3181.10.6.1.1.45 |
A POE (Power over Ethernet) device has been disconnected. |
|
g6TrapNtpFail
|
.1.3.6.1.4.1.3181.10.6.1.1.46 |
The NTP client (Network Time Protocol) has a failure condition. |
|
g6TrapHardwareError
|
.1.3.6.1.4.1.3181.10.6.1.1.47 |
A hardware error has been detected. |
|
g6TrapSoftwareError
|
.1.3.6.1.4.1.3181.10.6.1.1.48 |
A software error has occured. |
|
g6TrapButtonPressed
|
.1.3.6.1.4.1.3181.10.6.1.1.49 |
System button pressed. |
|
g6TrapFirmwareUpdateOk
|
.1.3.6.1.4.1.3181.10.6.1.1.5 |
Firmware installation has successfully taken place. |
|
g6TrapFirmwareUpdateFail
|
.1.3.6.1.4.1.3181.10.6.1.1.6 |
Firmware installation has FAILED. |
|
g6TrapInputSignalNormal
|
.1.3.6.1.4.1.3181.10.6.1.1.67 |
An external input signal has been deactivated and returned to normal state. |
|
g6TrapInputSignalActivated
|
.1.3.6.1.4.1.3181.10.6.1.1.68 |
An external input signal has been activated. |
|
g6TrapOutputRelayNormal
|
.1.3.6.1.4.1.3181.10.6.1.1.69 |
A relay output signal has been deactivated and returned to normal state. |
|
g6TrapLicenseViolation
|
.1.3.6.1.4.1.3181.10.6.1.1.7 |
Firmware is used for which no license has been granted. Please contact sales representant. |
|
g6TrapOutputRelayActivated
|
.1.3.6.1.4.1.3181.10.6.1.1.70 |
An external input signal has been deactivated and returned to normal state. |
|
g6TrapPacketIntercepted
|
.1.3.6.1.4.1.3181.10.6.1.1.71 |
Special filter has intercepted a data packet. |
|
g6TrapScriptUnitPositive
|
.1.3.6.1.4.1.3181.10.6.1.1.72 |
A positive unit related user defined event created by script or app. |
|
g6TrapScriptUnitNegative
|
.1.3.6.1.4.1.3181.10.6.1.1.73 |
A negative unit related user defined event created by script or app. |
|
g6TrapScriptPortPositive
|
.1.3.6.1.4.1.3181.10.6.1.1.74 |
A positive port related user defined event created by script or app. |
|
g6TrapScriptPortNegative
|
.1.3.6.1.4.1.3181.10.6.1.1.75 |
A negative port related user defined event created by script or app. |
|
g6TrapScriptExecuted
|
.1.3.6.1.4.1.3181.10.6.1.1.76 |
A user defined script execution started. |
|
g6TrapScriptError
|
.1.3.6.1.4.1.3181.10.6.1.1.77 |
Script execution error of a user defined script. |
|
g6TrapLoopRemoved
|
.1.3.6.1.4.1.3181.10.6.1.1.78 |
Cable loop removed. Port unblocked. |
|
g6TrapLoopDetected
|
.1.3.6.1.4.1.3181.10.6.1.1.79 |
Cable loop detected. Port blocked. |
|
g6TrapColdStart
|
.1.3.6.1.4.1.3181.10.6.1.1.8 |
The device has booted. Data transmission was interrupted. |
|
g6TrapLacpConnect
|
.1.3.6.1.4.1.3181.10.6.1.1.80 |
Aggregated link established. |
|
g6TrapLacpDisconnect
|
.1.3.6.1.4.1.3181.10.6.1.1.81 |
Aggregated link down. |
|
g6TrapAppInstalled
|
.1.3.6.1.4.1.3181.10.6.1.1.82 |
App installed ok. |
|
g6TrapAppInstallationFail
|
.1.3.6.1.4.1.3181.10.6.1.1.83 |
App installation has failed. |
|
g6TrapAppDeinstalled
|
.1.3.6.1.4.1.3181.10.6.1.1.84 |
App deinstalled. |
|
g6TrapCableChangeDetected
|
.1.3.6.1.4.1.3181.10.6.1.1.85 |
Change in cable termination detected. |
|
g6TrapImplausibleConfig
|
.1.3.6.1.4.1.3181.10.6.1.1.86 |
Implausible configuration detected |
|
g6TrapNetworkAttack
|
.1.3.6.1.4.1.3181.10.6.1.1.87 |
Potential network attack detected |
|
g6TrapModuleInserted
|
.1.3.6.1.4.1.3181.10.6.1.1.88 |
A hardware module has been inserted into the system. |
|
g6TrapModuleRemoved
|
.1.3.6.1.4.1.3181.10.6.1.1.89 |
A hardware module has been removed from the system. |
|
g6TrapWarmStart
|
.1.3.6.1.4.1.3181.10.6.1.1.9 |
The device has (partially) booted without interupting data transmission services. |
|
g6TrapMsp1000UnitPositive
|
.1.3.6.1.4.1.3181.10.6.1.1.90 |
A positive MSP1000 unit related event has occured. |
|
g6TrapMsp1000UnitNegative
|
.1.3.6.1.4.1.3181.10.6.1.1.91 |
A negative MSP1000 unit related event has occured. |
|
g6TrapMsp1000PortPositive
|
.1.3.6.1.4.1.3181.10.6.1.1.92 |
A positive MSP1000 port related event has occured. |
|
g6TrapMsp1000PortNegative
|
.1.3.6.1.4.1.3181.10.6.1.1.93 |
A negative MSP1000 port related event has occured. |
|
g6TrapBackupTerminated
|
.1.3.6.1.4.1.3181.10.6.1.1.94 |
Backup path not required. |
|
g6TrapBackupEngaged
|
.1.3.6.1.4.1.3181.10.6.1.1.95 |
Backup path has been engaged. |
|
g6TrapBackupFailure
|
.1.3.6.1.4.1.3181.10.6.1.1.96 |
Backup path could not be completed. |
|
g6TrapFanOk
|
.1.3.6.1.4.1.3181.10.6.1.1.97 |
Cooling fan operating normally. |
|
g6TrapFanDegraded
|
.1.3.6.1.4.1.3181.10.6.1.1.98 |
Cooling fan degraded. Replace fan soon. |
|
g6TrapFanFailure
|
.1.3.6.1.4.1.3181.10.6.1.1.99 |
Cooling fan failed. Replace fan immediately |