LUM-IP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
33

ipIfTable

table
.1.3.6.1.4.1.8708.2.14.2.2.1 · 1 row entry · 6 columns
Open in standard view 
The IP interface table.
ipIfEntry entry .1.3.6.1.4.1.8708.2.14.2.2.1.1
An entry in the IP interface table.
Indexes
ipIfIndex
Column Syntax OID
ipIfIndex
An arbitrary index assigned to each entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.14.2.2.1.1.1
ipIfName
The name of the object, for example 'eth1' or
'ppp-1-7'. For the latter the numbers indicate
the subrack and slot number.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.14.2.2.1.1.2
ipIfAddr
The destination IP address of this route.
Set to 0.0.0.0 if no address is assigned.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8708.2.14.2.2.1.1.3
ipIfNetMask
The subnet mask associated with the IP address
of this entry. The value of the mask is an IP
address with all the network bits set to 1 and
all the hosts bits set to 0.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8708.2.14.2.2.1.1.4
ipIfOperStatus
The operational state for the interface.

down - The interfaces is disabled.

up - The interface is ready to pass packages.
Enumeration
Enumerated Values:
1down
2up
 .1.3.6.1.4.1.8708.2.14.2.2.1.1.5
ipIfDstAddr
The destination IP address of this interface.
Set to 0.0.0.0 if no address is assigned.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8708.2.14.2.2.1.1.6

ipRouteTable

table
.1.3.6.1.4.1.8708.2.14.2.3.1 · 1 row entry · 10 columns
Open in standard view 
Statically configured IP routes.
ipRouteEntry entry .1.3.6.1.4.1.8708.2.14.2.3.1.1
An entry in the routing table.
Indexes
ipRouteIndex
Column Syntax OID
ipRouteIndex
An arbitrary index assigned to each entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.14.2.3.1.1.1
ipRouteDest
The destination IP address of this route.

This object may not take a Multicast (Class D)
address value.

Any assignment (implicit or otherwise) of an
instance of this object to a value x mu…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8708.2.14.2.3.1.1.2
ipRouteMask
Indicate the mask to be logical-ANDed with the
destination address before being compared to the
value in the ipRouteDest field. For those systems
that do not support arbitrary subnet masks, an
agent constructs the value…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8708.2.14.2.3.1.1.3
ipRouteNextHop
On remote routes, the address of the next system
en route; Otherwise, 0.0.0.0.

nextHop is restricted to the same sub-net as the
node belongs.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8708.2.14.2.3.1.1.4
ipRouteIfName
The name of the local interface through which the
next hop of this route should be reached.
The following interface names are permitted:

pn-n-n-n-n - In-band management wrapper channel or
optical supervis…
LUM-TCMgmtNameStringr/w
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.14.2.3.1.1.5
ipRouteRowStatus
Manages creation and deletion of conceptual rows.
See also SNMPv2-TC.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.8708.2.14.2.3.1.1.6
ipRouteProto
The routing mechanism via which this route was
learned. Inclusion of values for gateway routing
protocols is not intended to imply that hosts
should support those protocols.
Enumeration
Enumerated Values:
1system
2kernel
3connect
4static
5rip
6ripng
7ospf
8ospf6
9bgp
 .1.3.6.1.4.1.8708.2.14.2.3.1.1.7
ipRouteMetric
The routing metric for this route.
The semantics of this metric are determined by
the routing-protocol specified in the routes
ipRouteProto value.

Note, this value is not possible to change when
protocol …
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.8708.2.14.2.3.1.1.8
ipRouteOperStatus
The administrative state for the interface.

down - The route is in-active.

up - The route is active.
Enumeration
Enumerated Values:
1down
2up
 .1.3.6.1.4.1.8708.2.14.2.3.1.1.9
ipRouteName
Symbolic name of the route entry.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.14.2.3.1.1.10

ospfIfTable

table
.1.3.6.1.4.1.8708.2.14.2.5.1 · 1 row entry · 11 columns
Open in standard view 
The OSPF Interface Table describes the interfaces
from the viewpoint of OSPF.
ospfIfEntry entry .1.3.6.1.4.1.8708.2.14.2.5.1.1
The OSPF Interface Entry describes one interface
from the viewpoint of OSPF.
Indexes
ospfIfIndex
Column Syntax OID
ospfIfIndex
An arbitrary index assigned to each entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.14.2.5.1.1.1
ospfIfName
The name of the interface.
OSPF configuration is not permitted on the
following interfaces:

The following interface names are permitted:

eth1 - The management interface.

pn-n…
LUM-TCMgmtNameStringr/w
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.14.2.5.1.1.3
ospfIfAreaId
A 32-bit integer uniquely identifying the area
to which the interface connects.
Area ID 0.0.0.0 is used for the OSPF backbone.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8708.2.14.2.5.1.1.4
ospfIfMetric
The OSPF internal cost.
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.8708.2.14.2.5.1.1.5
ospfIfRtrPriority
The priority of this interface.
Used in multi-access networks, this field is used
in the designated router election algorithm.
The value 0 signifies that the router is not
eligible to become the designated router on thi…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.8708.2.14.2.5.1.1.6
ospfIfDesignatedRouterId
The router id of the designated router for the
network to which the interface connects.
0.0.0.0 means that there is no designated router.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8708.2.14.2.5.1.1.7
ospfIfBackupDesignatedRouterId
The router id of the backup designated router for
the network to which the interface connects.
0.0.0.0 means that there is no backup designated
router.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8708.2.14.2.5.1.1.8
ospfIfAdminStatus
The OSPF administrative status of the interface.
The value formed on the interface, and the
interface will be advertised as an internal route
to some area. The value 'down' denotes that the
interface is external to OS…
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.8708.2.14.2.5.1.1.9
ospfIfOperStatus
The OSPF operative status of the interface.
See also RFC 2328 'OSPF Version 2'.

down

loopback

waiting

ptp - point to point

dr - designated route…
Enumeration
Enumerated Values:
0undefined
1down
2loopback
3waiting
4ptp
5dr
6bdr
7odr
 .1.3.6.1.4.1.8708.2.14.2.5.1.1.10
ospfIfRowStatus
This variable displays the status of the entry.
Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.8708.2.14.2.5.1.1.11
ospfIfPassive
OSPF Passive mode.
If OSPF Passive mode is set to enable, OSPF will not
advertice itself on this interface. This interface
will however be adverticed on other interfaces.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.8708.2.14.2.5.1.1.12

ospfNbrTable

table
.1.3.6.1.4.1.8708.2.14.2.6.1 · 1 row entry · 6 columns
Open in standard view 
OSPF Neighbors.
ospfNbrEntry entry .1.3.6.1.4.1.8708.2.14.2.6.1.1
The OSPF Neighbor Table describes all neighbors in
the locality of the subject router.
Indexes
ospfNbrIndex
Column Syntax OID
ospfNbrIndex
An arbitrary index assigned to each entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.14.2.6.1.1.1
ospfNbrIpAddr
The IP address this neighbor is using in its
IP Source Address.

Note that, on addressless links, this will not be
0.0.0.0, but the address of another of the
neighbors interfaces.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8708.2.14.2.6.1.1.2
ospfNbrRtrId
An IP address uniquely identifying the
neighboring router in the Autonomous System.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8708.2.14.2.6.1.1.3
ospfNbrIfName
The name of the local interface the neighboring
router has been discovered on.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.14.2.6.1.1.4
ospfNbrOperStatus
The state of the relationship with this neighbor.
See also RFC 2328 'OSPF Version 2'.
Enumeration
Enumerated Values:
1down
2attempt
3init
4twoWay
5exchangeStart
6exchange
7loading
8full
 .1.3.6.1.4.1.8708.2.14.2.6.1.1.5
ospfNbrName
A symbolic name of the neighbor.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.14.2.6.1.1.6