LUM-IFSONET-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
22

ifSonetSectionTable

table
.1.3.6.1.4.1.8708.2.53.2.2.1 · 1 row entry · 13 columns
Open in standard view 
The section group contains information and
configuration for the section.
ifSonetSectionEntry entry .1.3.6.1.4.1.8708.2.53.2.2.1.1
An entry in the ifSonet section list.
Indexes
ifSonetSectionIndex
Column Syntax OID
ifSonetSectionIndex
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.53.2.2.1.1.1
ifSonetSectionName
The management name of the Sonet section, for example
'section:1:2:1-2', where the first number indicates
subrack, the second slot number and the third/fourth
are the physical port numbers.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.53.2.2.1.1.2
ifSonetSectionConnIfBasicIfIndex
An index that describes to which index in ifBasicIf table
this object is related.
LUM-TCUnsigned32WithNA
Textual Convention: LUM-TCUnsigned32WithNA Unsigned32
Type Constraints:
range: 0..4294967294
 .1.3.6.1.4.1.8708.2.53.2.2.1.1.3
ifSonetSectionOhTransparencyBitmask
The OH transparency bitmask.
Bits:
B1 = 0x01
E1 = 0x02
F1 = 0x04
D1-D3 = 0x08
J0 = 0x10
LUM-TCUnsigned32WithNA
Textual Convention: LUM-TCUnsigned32WithNA Unsigned32
Type Constraints:
range: 0..4294967294
 .1.3.6.1.4.1.8708.2.53.2.2.1.1.4
ifSonetSectionTraceTransmitted
The trace to be transmitted from this interface.

Default value: <IP address>:<subrack>:<slot>:<port>
Note that only the last part of the address is used.

The trace _notApplicable_ is used …
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.8708.2.53.2.2.1.1.5
ifSonetSectionTraceReceived
The received trace for this interface.

The trace _notApplicable_ is used to tell SNMP clients that
attribute is not used in current configuration.

The trace _notAvailable_ is used to tell S…
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.8708.2.53.2.2.1.1.6
ifSonetSectionTraceExpected
Trace used for matching against the received trace.

The trace _notApplicable_ is used to tell SNMP clients that
attribute is not used in current configuration.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.8708.2.53.2.2.1.1.7
ifSonetSectionTraceAlarmMode
Controls if the trace identifier mismatch alarm
should be raised if received trace and expected trace
differs.

disabled - The alarm is disabled.

enabled - The alarm is raised if expected tr…
LUM-TCEnabledDisabledWithNA
Textual Convention: LUM-TCEnabledDisabledWithNA Enumeration
Type Values:
1disabled
2enabled
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.53.2.2.1.1.8
ifSonetSectionTxSignalStatus
The state for outgoing (TX) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.
LUM-TCSignalStatusWithNA
Textual Convention: LUM-TCSignalStatusWithNA Enumeration
Type Values:
1down
2degraded
3up
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.53.2.2.1.1.9
ifSonetSectionRxSignalStatus
The state for incoming (RX) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.
LUM-TCSignalStatusWithNA
Textual Convention: LUM-TCSignalStatusWithNA Enumeration
Type Values:
1down
2degraded
3up
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.53.2.2.1.1.10
ifSonetSectionTraceMismatch
Trace identifier mismatch (TIM).

Indicates if the expected trace identifier differs from the
received trace identifier.

Reference: GR-253/6.2.1.1.9.

alarm: The received trace…
LUM-TCFaultStatusWithNA
Textual Convention: LUM-TCFaultStatusWithNA Enumeration
Type Values:
1ok
2alarm
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.53.2.2.1.1.11
ifSonetSectionLossOfFrame
Rx Section-Loss of frame (LOF).

Reference: GR-253/6.2.1.1.2

alarm: A SECTION frame cannot be located.

ok: A SECTION frame can be located.
LUM-TCFaultStatusWithNA
Textual Convention: LUM-TCFaultStatusWithNA Enumeration
Type Values:
1ok
2alarm
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.53.2.2.1.1.12
ifSonetSectionTxLossOfFrame
Tx Section-Loss of frame (LOF).

Reference: GR-253/6.2.1.1.2

alarm: A SECTION frame cannot be located.

ok: A SECTION frame can be located.
LUM-TCFaultStatusWithNA
Textual Convention: LUM-TCFaultStatusWithNA Enumeration
Type Values:
1ok
2alarm
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.53.2.2.1.1.13

ifSonetLineTable

table
.1.3.6.1.4.1.8708.2.53.2.3.1 · 1 row entry · 9 columns
Open in standard view 
The line group contains information and
configuration for the line overhead.
ifSonetLineEntry entry .1.3.6.1.4.1.8708.2.53.2.3.1.1
An entry in the ifSonet line list.
Indexes
ifSonetLineIndex
Column Syntax OID
ifSonetLineIndex
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.53.2.3.1.1.1
ifSonetLineName
The management name of the Sonet line, for example
'line:1:2:1-2', where the first number indicates
subrack, the second slot number and the third/fourth
are the physical port numbers.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.53.2.3.1.1.2
ifSonetLineConnIfBasicIfIndex
An index that describes to which index in ifBasicIf table
this object is related.
LUM-TCUnsigned32WithNA
Textual Convention: LUM-TCUnsigned32WithNA Unsigned32
Type Constraints:
range: 0..4294967294
 .1.3.6.1.4.1.8708.2.53.2.3.1.1.3
ifSonetLineOhTransparencyBitmask
The OH transparency bitmask.
Bits:
B2 = 0x01
E2 = 0x02
D4-D12 = 0x04
K1-K2 = 0x08
LUM-TCUnsigned32WithNA
Textual Convention: LUM-TCUnsigned32WithNA Unsigned32
Type Constraints:
range: 0..4294967294
 .1.3.6.1.4.1.8708.2.53.2.3.1.1.4
ifSonetLineTxSignalStatus
The state for outgoing (TX) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.
LUM-TCSignalStatusWithNA
Textual Convention: LUM-TCSignalStatusWithNA Enumeration
Type Values:
1down
2degraded
3up
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.53.2.3.1.1.5
ifSonetLineRxSignalStatus
The state for incoming (RX) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.
LUM-TCSignalStatusWithNA
Textual Convention: LUM-TCSignalStatusWithNA Enumeration
Type Values:
1down
2degraded
3up
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.53.2.3.1.1.6
ifSonetLineRxAlarmIndicationSignal
Rx Line alarm indication signal (AIS).

Reference: GR-253/6.2.1.2.1

alarm: An line AIS signal is detected.

ok: The line AIS is cleared.
LUM-TCFaultStatusWithNA
Textual Convention: LUM-TCFaultStatusWithNA Enumeration
Type Values:
1ok
2alarm
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.53.2.3.1.1.7
ifSonetLineRemoteDefectIndication
Rx Line remote defect indication (RDI).

Reference: GR-253/6.2.1.3

alarm: RDI indication (in frame) active.

ok: RDI indication inactive.
LUM-TCFaultStatusWithNA
Textual Convention: LUM-TCFaultStatusWithNA Enumeration
Type Values:
1ok
2alarm
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.53.2.3.1.1.8
ifSonetLineTxAlarmIndicationSignal
Tx Line alarm indication signal (AIS).

Reference: GR-253/6.2.1.2.1

alarm: An line AIS signal is detected.

ok: The line AIS is cleared.
LUM-TCFaultStatusWithNA
Textual Convention: LUM-TCFaultStatusWithNA Enumeration
Type Values:
1ok
2alarm
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.53.2.3.1.1.9