LLDP-EXT-MED-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
11
Rows
11
Columns
38
lldpXMedPortConfigTable
table.1.0.8802.1.1.2.1.5.4795.1.1.2
·
1 row entry
·
3 columns
A table that controls selection of LLDP TLVs to be transmitted on individual ports.
LLDP configuration information that controls the
transmission of the MED organizationally defined TLVs on
LLDP transmission capable ports.
This configuration object augments the lldpPortConfigEntry of
the L…
transmission of the MED organizationally defined TLVs on
LLDP transmission capable ports.
This configuration object augments the lldpPortConfigEntry of
the L…
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
lldpXMedPortCapSupported
The bitmap includes the MED organizationally defined set of LLDP
TLVs whose transmission is possible for the respective port on the LLDP agent of the device. Each bit in the bitmap corresponds to an LLDP-MED subtype ass… |
LldpXMedCapabilities Textual Convention: LldpXMedCapabilities BitsType Values:
|
.1.0.8802.1.1.2.1.5.4795.1.1.2.1.1 |
||||||||||||
|
lldpXMedPortConfigTLVsTxEnable
The lldpXMedPortConfigTLVsTxEnable, defined as a bitmap,
includes the MED organizationally defined set of LLDP TLVs whose transmission is allowed on the local LLDP agent by the network management. Each bit in the bitma… |
LldpXMedCapabilitiesr/w Textual Convention: LldpXMedCapabilities BitsType Values:
|
.1.0.8802.1.1.2.1.5.4795.1.1.2.1.2 |
||||||||||||
|
lldpXMedPortConfigNotifEnable
A value of 'true(1)' enables sending the topology change
traps on this port. A value of 'false(2)' disables sending the topology change traps on this port. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.0.8802.1.1.2.1.5.4795.1.1.2.1.3 |
.1.0.8802.1.1.2.1.5.4795.1.2.1
·
1 row entry
·
6 columns
This table contains one row per policy type per port of media policy information (as a part of the MED organizational extension) on the local system known to this agent.
Information about a particular policy on a specific
port component.
port component.
Indexes
LLDP-MIBlldpLocPortNum lldpXMedLocMediaPolicyAppType
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
lldpXMedLocMediaPolicyAppType
The media type that defines the primary function of the
application for the policy advertised by an endpoint. |
PolicyAppType Textual Convention: PolicyAppType BitsType Values:
|
.1.0.8802.1.1.2.1.5.4795.1.2.1.1.1 |
||||||||||||||||||
|
lldpXMedLocMediaPolicyVlanID
An extension of the VLAN Identifier for the port,
as defined in IEEE 802.1P-1998. A value of 1 through 4094 is used to define a valid PVID. A value of 0 shall be used if the device is using… |
Integer32 Constraints: range: 0-4095 |
.1.0.8802.1.1.2.1.5.4795.1.2.1.1.2 |
||||||||||||||||||
|
lldpXMedLocMediaPolicyPriority
This object contains the value of the 802.1p priority
which is associated with the given port on the local system. |
Integer32 Constraints: range: 0-7 |
.1.0.8802.1.1.2.1.5.4795.1.2.1.1.3 |
||||||||||||||||||
|
lldpXMedLocMediaPolicyDscp
This object contains the value of the Differentiated Service
Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475 which is associated with the given port on the local system. |
Dscp Textual Convention: Dscp Integer32Type Constraints: range: 0..63 |
.1.0.8802.1.1.2.1.5.4795.1.2.1.1.4 |
||||||||||||||||||
|
lldpXMedLocMediaPolicyUnknown
A value of 'true' indicates that the
network policy for the specified application type is currently unknown. In this case, the VLAN ID, the layer 2 priority and the DSCP value fields are ignored. A value of 'false' ind… |
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.0.8802.1.1.2.1.5.4795.1.2.1.1.5 |
||||||||||||||||||
|
lldpXMedLocMediaPolicyTagged
A value of 'true' indicates that the application is using a
tagged VLAN. A value of 'false' indicates that for the specific application the device either is using an untagged VLAN or does not support port based VLAN ope… |
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.0.8802.1.1.2.1.5.4795.1.2.1.1.6 |
lldpXMedLocLocationTable
table.1.0.8802.1.1.2.1.5.4795.1.2.9
·
1 row entry
·
2 columns
This table contains Location information as advertised
by the local system.
The information may be configured per port by a Location
Information Server (LIS) or other management application.
Multiple Location TLVs of different subtypes may be transmitted
in the same PDU.
The information in this table MUST be stored in non-volatile-memory
and persist over restart/reboot sequences.
Information about Location information for the local device.
Indexes
LLDP-MIBlldpLocPortNum lldpXMedLocLocationSubtype
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
lldpXMedLocLocationSubtype
The location subtype advertised by the local device.
|
LocationSubtype Textual Convention: LocationSubtype EnumerationType Values:
|
.1.0.8802.1.1.2.1.5.4795.1.2.9.1.1 |
||||||||
|
lldpXMedLocLocationInfo
The location information. Parsing of this information is
dependent upon the location subtype, as defined by the value of the lldpXMedLocLocationSubtype object. |
OctetStringr/w Constraints: range: 0-256 |
.1.0.8802.1.1.2.1.5.4795.1.2.9.1.2 |
.1.0.8802.1.1.2.1.5.4795.1.2.11
·
1 row entry
·
2 columns
This table contains one row per port of PSE PoE information on the local system known to this agent.
Information about a particular port PoE information.
Indexes
LLDP-MIBlldpLocPortNum
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
lldpXMedLocXPoEPSEPortPowerAv
This object contains the value of the power available from the
PSE via this port expressed in units of 0.1 watts. |
tenth of wattUnsigned32 Constraints: range: 0-1023 |
.1.0.8802.1.1.2.1.5.4795.1.2.11.1.1 |
||||||||
|
lldpXMedLocXPoEPSEPortPDPriority
Reflects the PD power priority that is being advertised on this
PSE port. If both locally configure priority and ldpXMedRemXPoEPDPowerPriority are available on this port, it is a matter of local policy wh… |
Enumeration Enumerated Values:
|
.1.0.8802.1.1.2.1.5.4795.1.2.11.1.2 |
.1.0.8802.1.1.2.1.5.4795.1.3.1
·
1 row entry
·
3 columns
A table that displays LLDP-MED capabilities of remote devices connected to individual ports.
LLDP-MED capabilities of remote devices connected to the device
ports and communicating via LLDP-MED.
The remote tables in the LLDP-MED MIB excepting this table may be
sparsely populate. An entry in one of …
ports and communicating via LLDP-MED.
The remote tables in the LLDP-MED MIB excepting this table may be
sparsely populate. An entry in one of …
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
lldpXMedRemCapSupported
The bitmap includes the MED organizationally defined set of LLDP
TLVs whose transmission is possible on the LLDP agent of the remote device connected to this port. Each bit in the bitmap corresponds to an LLDP-MED subty… |
LldpXMedCapabilities Textual Convention: LldpXMedCapabilities BitsType Values:
|
.1.0.8802.1.1.2.1.5.4795.1.3.1.1.1 |
||||||||||||
|
lldpXMedRemCapCurrent
The bitmap includes the MED organizationally defined set of LLDP
TLVs whose transmission is possible on the LLDP agent of the remote device connected to this port. Each bit in the bitmap corresponds to an LLDP-MED subty… |
LldpXMedCapabilities Textual Convention: LldpXMedCapabilities BitsType Values:
|
.1.0.8802.1.1.2.1.5.4795.1.3.1.1.2 |
||||||||||||
|
lldpXMedRemDeviceClass
Device Class as advertised by the device remotely connected to the
port. |
LldpXMedDeviceClass Textual Convention: LldpXMedDeviceClass EnumerationType Values:
|
.1.0.8802.1.1.2.1.5.4795.1.3.1.1.3 |
.1.0.8802.1.1.2.1.5.4795.1.3.2
·
1 row entry
·
6 columns
This table contains media policy information as advertised
by the remote system.
This table may be sparsely populated. Entries in this table are
relevant only if the networkPolicy(0) bits in the
lldpXMedRemCapSupported and lldpXMedRemCapCurrent objects of the
corresponding ports are set.
Information about the per port per policy type policy
information for a particular physical network connection.
information for a particular physical network connection.
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
lldpXMedRemMediaPolicyAppType
The media type that defines the primary function of the
application for the policy advertised by the endpoint connected remotely to this port. |
PolicyAppType Textual Convention: PolicyAppType BitsType Values:
|
.1.0.8802.1.1.2.1.5.4795.1.3.2.1.1 |
||||||||||||||||||
|
lldpXMedRemMediaPolicyVlanID
An extension of the VLAN Identifier for the remote system
connected to this port, as defined in IEEE 802.1P-1998. A value of 1 through 4094 is used to define a valid PVID. A value of 0 shal… |
Integer32 Constraints: range: 0-4095 |
.1.0.8802.1.1.2.1.5.4795.1.3.2.1.2 |
||||||||||||||||||
|
lldpXMedRemMediaPolicyPriority
This object contains the value of the 802.1p priority
which is associated with the remote system connected at given port. |
Integer32 Constraints: range: 0-7 |
.1.0.8802.1.1.2.1.5.4795.1.3.2.1.3 |
||||||||||||||||||
|
lldpXMedRemMediaPolicyDscp
This object contains the value of the Differentiated Service
Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475 which is associated with remote system connected at the port. |
Dscp Textual Convention: Dscp Integer32Type Constraints: range: 0..63 |
.1.0.8802.1.1.2.1.5.4795.1.3.2.1.4 |
||||||||||||||||||
|
lldpXMedRemMediaPolicyUnknown
A value of 'true' indicates that the
network policy for the specified application type is currently unknown. In this case, the VLAN ID, the layer 2 priority and the DSCP value fields are ignored. A value of 'false' ind… |
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.0.8802.1.1.2.1.5.4795.1.3.2.1.5 |
||||||||||||||||||
|
lldpXMedRemMediaPolicyTagged
A value of 'true' indicates that the application is using a
tagged VLAN. A value of 'false' indicates that for the specific application the device either is using an untagged VLAN or does not support port based VLAN ope… |
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.0.8802.1.1.2.1.5.4795.1.3.2.1.6 |
.1.0.8802.1.1.2.1.5.4795.1.3.3
·
1 row entry
·
7 columns
This table contains inventory information as advertised
by the remote system.
This table may be sparsely populated. Entries in this table are
relevant only if the inventory(2) bits in the
lldpXMedRemCapSupported and lldpXMedRemCapCurrent objects of the
corresponding ports are set.
Information about inventory information for the remote devices
connected to the ports.
connected to the ports.
| Column | Syntax | OID |
|---|---|---|
|
lldpXMedRemHardwareRev
The vendor-specific hardware revision string
as advertised by the remote endpoint. |
OctetString Constraints: range: 0-32 |
.1.0.8802.1.1.2.1.5.4795.1.3.3.1.1 |
|
lldpXMedRemFirmwareRev
The vendor-specific firmware revision string
as advertised by the remote endpoint. |
OctetString Constraints: range: 0-32 |
.1.0.8802.1.1.2.1.5.4795.1.3.3.1.2 |
|
lldpXMedRemSoftwareRev
The vendor-specific software revision string
as advertised by the remote endpoint. |
OctetString Constraints: range: 0-32 |
.1.0.8802.1.1.2.1.5.4795.1.3.3.1.3 |
|
lldpXMedRemSerialNum
The vendor-specific serial number
as advertised by the remote endpoint. |
OctetString Constraints: range: 0-32 |
.1.0.8802.1.1.2.1.5.4795.1.3.3.1.4 |
|
lldpXMedRemMfgName
The vendor-specific manufacturer name
as advertised by the remote endpoint. |
OctetString Constraints: range: 0-32 |
.1.0.8802.1.1.2.1.5.4795.1.3.3.1.5 |
|
lldpXMedRemModelName
The vendor-specific model name
as advertised by the remote endpoint. |
OctetString Constraints: range: 0-32 |
.1.0.8802.1.1.2.1.5.4795.1.3.3.1.6 |
|
lldpXMedRemAssetID
The vendor-specific asset tracking identifier
as advertised by the remote endpoint. |
OctetString Constraints: range: 0-32 |
.1.0.8802.1.1.2.1.5.4795.1.3.3.1.7 |
lldpXMedRemLocationTable
table.1.0.8802.1.1.2.1.5.4795.1.3.4
·
1 row entry
·
2 columns
This table contains Location information as advertised
by the remote system.
This table may be sparsely populated. Entries in this table are
relevant only if the Location(3) bits in the
lldpXMedRemCapSupported and lldpXMedRemCapCurrent objects of the
corresponding ports are set.
Information about Location information for the remote devices
connected to the ports.
connected to the ports.
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
lldpXMedRemLocationSubtype
The location subtype advertised by the remote endpoint.
|
LocationSubtype Textual Convention: LocationSubtype EnumerationType Values:
|
.1.0.8802.1.1.2.1.5.4795.1.3.4.1.1 |
||||||||
|
lldpXMedRemLocationInfo
The location information advertised by the remote endpoint.
Parsing of this information is dependent upon the location subtype, as defined by the value of the corresponding lldpXMedRemLocationSubType object. |
OctetString Constraints: range: 0-256 |
.1.0.8802.1.1.2.1.5.4795.1.3.4.1.2 |
lldpXMedRemXPoETable
table.1.0.8802.1.1.2.1.5.4795.1.3.5
·
1 row entry
·
1 columns
This table contains information about the PoE device type
as advertised by the remote system.
This table is densely populated.
Information about PoE type of the remote devices
connected to the ports.
connected to the ports.
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
lldpXMedRemXPoEDeviceType
Defines the type of Power-via-MDI (Power over Ethernet) advertised
by the remote device. A value pseDevice(2) indicates that the device is advertised as a Power Sourcing Entity (PSE). A val… |
Enumeration Enumerated Values:
|
.1.0.8802.1.1.2.1.5.4795.1.3.5.1.1 |
lldpXMedRemXPoEPSETable
table.1.0.8802.1.1.2.1.5.4795.1.3.6
·
1 row entry
·
3 columns
This table contains extended PoE information as advertised
by the remote devices of PSE type.
This table may be sparsely populated. Entries in this table are
relevant only if the extendedPSE(4) bits in the
lldpXMedRemCapSupported and lldpXMedRemCapCurrent objects of the
corresponding ports are set.
Information about Extended PoE PSE information for
the remote devices connected to the ports.
the remote devices connected to the ports.
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
lldpXMedRemXPoEPSEPowerAv
This object contains the value of the power available from the
PSE via this port expressed in units of 0.1 watts on the remote device. |
tenth of wattUnsigned32 Constraints: range: 0-1023 |
.1.0.8802.1.1.2.1.5.4795.1.3.6.1.1 |
||||||||
|
lldpXMedRemXPoEPSEPowerSource
Defines the type of PSE Power Source advertised
by the remote device. A value primary(2) indicates that the device advertises its power source as primary. A value backup(3) indicates that t… |
Enumeration Enumerated Values:
|
.1.0.8802.1.1.2.1.5.4795.1.3.6.1.2 |
||||||||
|
lldpXMedRemXPoEPSEPowerPriority
This object contains the value of the PSE power priority
advertised by the remote device. A value critical(2) indicates that the device advertises its power priority as critical, as per RFC 3621. … |
Enumeration Enumerated Values:
|
.1.0.8802.1.1.2.1.5.4795.1.3.6.1.3 |
lldpXMedRemXPoEPDTable
table.1.0.8802.1.1.2.1.5.4795.1.3.7
·
1 row entry
·
3 columns
This table contains extended PoE information as advertised
by the remote devices of PD type.
This table may be sparsely populated. Entries in this table are
relevant only if the extendedPD(5) bits in the
lldpXMedRemCapSupported and lldpXMedRemCapCurrent objects of the
corresponding ports are set.
Information about XPoEPD information for the remote devices
connected to the ports.
connected to the ports.
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
lldpXMedRemXPoEPDPowerReq
This object contains the value of the power required by a
PD connected remotely to the port expressed in units of 0.1 watts. |
tenth of wattUnsigned32 Constraints: range: 0-1023 |
.1.0.8802.1.1.2.1.5.4795.1.3.7.1.1 |
||||||||
|
lldpXMedRemXPoEPDPowerSource
Defines the type of Power Source advertised as being used
by the device connected remotely to the port. A value fromPSE(2) indicates that the device advertises its power source as received from a PSE. … |
Enumeration Enumerated Values:
|
.1.0.8802.1.1.2.1.5.4795.1.3.7.1.2 |
||||||||
|
lldpXMedRemXPoEPDPowerPriority
Defines the priority advertised as being required by the PD
connected remotely to the port. A value critical(2) indicates that the device advertises its power Priority as critical, as per RFC 3621. … |
Enumeration Enumerated Values:
|
.1.0.8802.1.1.2.1.5.4795.1.3.7.1.3 |