LENOVO-GbTOR-G8264CS-SIF-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

224

Rows

224

Columns

1,782

agCurCfgTrapHostTable

table

.1.3.6.1.4.1.20301.2.7.21.1.1.1.184 · 1 row entry · 3 columns

Open in standard view

The table of current trap hosts configure.

agCurCfgTrapHostEntry entry .1.3.6.1.4.1.20301.2.7.21.1.1.1.184.1

A trap host configuration on the switch.

Indexes

agCurCfgTrapHostIndex

Column	Syntax	OID
agCurCfgTrapHostIndex The trap host index. Valid range is 1-16	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.1.1.1.184.1.1`
agCurCfgTrapHostAddress The trap host address.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.1.1.1.184.1.2`
agCurCfgTrapHostCommStr The trap host community string.	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.20301.2.7.21.1.1.1.184.1.3`

agNewCfgTrapHostTable

table

.1.3.6.1.4.1.20301.2.7.21.1.1.1.185 · 1 row entry · 4 columns

Open in standard view

The table for trap host definitions in the new configuration block.

agNewCfgTrapHostEntry entry .1.3.6.1.4.1.20301.2.7.21.1.1.1.185.1

A row in the trap host definition table

Indexes

agNewCfgTrapHostIndex

Column Syntax OID

agNewCfgTrapHostIndex

The trap host index. Valid range is 1-16

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.1.1.1.185.1.1

agNewCfgTrapHostAddress

The trap host address in the new configuration block.
Setting IPv6 value is not supported in realease 7.9.x.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.1.1.1.185.1.2

agNewCfgTrapHostCommStr

The trap host community string in the new configuration block.

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.20301.2.7.21.1.1.1.185.1.3

agNewCfgTrapHostDelete

By setting the value to delete(2), the entire row is deleted.

Enumerationr/w

Enumerated Values:

1	other
2	delete

.1.3.6.1.4.1.20301.2.7.21.1.1.1.185.1.4

agPortCurCfgTable

table

.1.3.6.1.4.1.20301.2.7.21.1.1.2.2 · 1 row entry · 23 columns

Open in standard view

The table of port configuration in the current configuration block.

agPortCurCfgTableEntry entry .1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1

A row in the port table in the current configuration block.

Indexes

agPortCurCfgIndx

Column Syntax OID

agPortCurCfgIndx

The index of the row in port configurations table.

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.1

agPortCurCfgState

This is the state of the port.

Enumeration

Enumerated Values:

2	enabled
3	disabled

.1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.2

agPortCurCfgVlanTag

This is VLAN tag state of the port

Enumeration

Enumerated Values:

2	tagged
3	untagged

.1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.3

agPortCurCfgRmon

This object is used to turn RMON on or off on the port.

Enumeration

Enumerated Values:

2	on
3	off

.1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.5

agPortCurCfgPVID

The default VLAN ID for the port.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.6

agPortCurCfgGigEthAutoNeg

This object is used to turn the autonegotiation on or off
for gigabit Ethernet connection.

Enumeration

Enumerated Values:

2	on
3	off

.1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.11

agPortCurCfgGigEthFctl

This object is used to select port flow control for
gigabit Ethernet connection.

Enumeration

Enumerated Values:

2	transmit
3	receive
4	both
5	none

.1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.12

agPortCurCfgPortName

The switch port name.

OctetString

Constraints:
range: 0-63

.1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.13

agPortCurCfgLinkTrap

Indicates whether linkUp/linkDown traps should be
generated for this interface.

By default, this object should have the value
enabled(1) for interfaces which do not operate on
'top' of any other interface…

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.16

agPortCurCfgGigEthSpeed

Selects the port speed for Gigabit Ethernet connection.

Enumeration

Enumerated Values:

2	mbs10
3	mbs100
4	any
5	mbs1000
6	mbs10000
7	mbs40000

.1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.21

agPortCurCfgGigEthMode

This object is used to select port mode for Gigabit Ethernet connection.

Enumeration

Enumerated Values:

2	full-duplex
3	half-duplex
4	any

.1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.22

agPortCurCfgDscpRemarking

Enable or disable Dscp remarking for the switch port.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.23

agPortCurCfgPortAlias

The switch port alias.

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.24

agPortCurCfgTagPVID

This is PVID tag state of the port

Enumeration

Enumerated Values:

2	tagged
3	untagged

.1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.25

agPortCurCfgLearning

Enable or disable L2 (FDB) Learning for the switch port.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.26

agPortCurCfgType

The switch port type.

OctetString

Constraints:
range: 0-7

.1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.29

agPortCurCfgErrDisableRecovery

This object indicates whether the system will automatically
re-enable this port if it becomes error-disabled. This port
will be re-enabled after the time interval specified by the
agCurCfgErrDisableTimeout object has el…

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.35

agPortCurCfgTagiPVID

This is ingress PVID tag state of the port

Enumeration

Enumerated Values:

2	tagged
3	untagged

.1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.49

agPortCurCfgUcBw

Current value of unicast bandwidth

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.60

agPortCurCfgPrivateVlanStatus

Current state of Private VLAN on this port

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.61

agPortCurCfgMappedPrimaryVlans

Primary VLAN list mapped to port.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 8
|| ||
|| ||___ vlan 7
|| |____ vlan 6
|| . . .
…

OctetString

.1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.62

agPortCurCfgAssociatedSecondaryVlans

Secondary VLAN list associated to port.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 8
|| ||
|| ||___ vlan 7
|| |____ vlan 6
|| . …

OctetString

.1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.63

agPortCurCfgSpeed1G

Limit the port to 1G speed

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.69

agPortNewCfgTable

table

.1.3.6.1.4.1.20301.2.7.21.1.1.2.3 · 1 row entry · 27 columns

Open in standard view

The table of port configuration in the new configuration block.

agPortNewCfgTableEntry entry .1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1

A row in the port configuration table in the new configuration block.

Indexes

agPortNewCfgIndx

Column Syntax OID

agPortNewCfgIndx

The index of the row in port configurations table.

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.1

agPortNewCfgState

This is the state of the port.

Enumerationr/w

Enumerated Values:

2	enabled
3	disabled

.1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.2

agPortNewCfgVlanTag

This is VLAN tag state of the port

Enumerationr/w

Enumerated Values:

2	tagged
3	untagged

.1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.3

agPortNewCfgRmon

This object is used to turn RMON on or off on the port.

Enumerationr/w

Enumerated Values:

2	on
3	off

.1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.5

agPortNewCfgPVID

The default VLAN ID for the port.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.6

agPortNewCfgGigEthAutoNeg

This object is used to turn the autonegotiation on or off
for gigabit Ethernet connection.

Enumerationr/w

Enumerated Values:

2	on
3	off

.1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.11

agPortNewCfgGigEthFctl

This object is used to select port flow control for
gigabit Ethernet connection.

Enumerationr/w

Enumerated Values:

2	transmit
3	receive
4	both
5	none

.1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.12

agPortNewCfgPortName

The switch port name.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.13

agPortNewCfgLinkTrap

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.16

agPortNewCfgGigEthSpeed

Selects the port speed for Gigabit Ethernet connection.

Enumerationr/w

Enumerated Values:

2	mbs10
3	mbs100
4	any
5	mbs1000
6	mbs10000
7	mbs40000

.1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.21

agPortNewCfgGigEthMode

This object is used to select port mode for Gigabit Ethernet connection.

Enumerationr/w

Enumerated Values:

2	full-duplex
3	half-duplex
4	any

.1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.22

agPortNewCfgDscpRemarking

Enable or disable Dscp remarking for the switch port.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.23

agPortNewCfgTagPVID

This is PVID tag state of the port

Enumerationr/w

Enumerated Values:

2	tagged
3	untagged

.1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.25

agPortNewCfgLearning

Enable or disable L2 (FDB) Learning for the switch port.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.26

agPortNewCfgType

The switch port type.

OctetString

Constraints:
range: 0-7

.1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.29

agPortNewCfgErrDisableRecovery

This object specifies whether the system should automatically
re-enable this port when it becomes error-disabled. Use this
object to change the port-level setting of the error-disable
recovery action.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.35

agPortNewCfgTagiPVID

This is ingress PVID tag state of the port

Enumerationr/w

Enumerated Values:

2	tagged
3	untagged

.1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.49

agPortNewCfgUcBw

Set port unicast bandwidth

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.60

agPortNewCfgPrivateVlanStatus

Enable or disable the Private VLAN on this port

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.61

agPortNewCfgMappedPrimaryVlans

Primary VLAN list mapped to port.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 8
|| ||
|| ||___ vlan 7
|| |____ vlan 6
|| . . .
…

OctetString

.1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.62

agPortNewCfgAddPrimaryVlan

Adds the port to the specified primary VLAN. A '0' value is
returned when read.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.63

agPortNewCfgDelPrimaryVlan

Removes the port from the specified primary VLAN. A '0' value is
returned when read.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.64

agPortNewCfgAssociatedSecondaryVlans

Secondary VLAN list associated to port.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 8
|| ||
|| ||___ vlan 7
|| |____ vlan 6
|| . …

OctetString

.1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.65

agPortNewCfgAddSecondaryVlan

Adds the port to the specified secondary VLAN. A '0' value is
returned when read.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.66

agPortNewCfgDelSecondaryVlan

Removes the port from the secondary VLAN. A '0' value is
returned when read.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.67

agPortNewCfgPortAlias

The port alias.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.68

agPortNewCfgSpeed1G

Limit the port to 1G speed

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.69

ntpCurCfgMdkeyTable

table

.1.3.6.1.4.1.20301.2.7.21.1.1.4.28 · 1 row entry · 3 columns

Open in standard view

The table of NTP MD5/SHA-1 keys in the current configuration block.

ntpCurCfgMdkeyEntry entry .1.3.6.1.4.1.20301.2.7.21.1.1.4.28.1

Information about an NTP MD5/SHA-1 keys table.

Indexes

ntpCurCfgMdkeyIndex

Column Syntax OID

ntpCurCfgMdkeyIndex

The NTP MD5/SHA-1 Key number for which the NTP MdKey table is related.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.1.1.4.28.1.1

ntpCurCfgMdkeyKey

The character string representing the MD5/SHA-1 Key.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.20301.2.7.21.1.1.4.28.1.2

ntpCurCfgKeyType

The NTP Key type,0: MD5, 1: SHA-1.

Enumeration

Enumerated Values:

0	md5
1	sha-1

.1.3.6.1.4.1.20301.2.7.21.1.1.4.28.1.3

ntpNewCfgMdkeyTable

table

.1.3.6.1.4.1.20301.2.7.21.1.1.4.29 · 1 row entry · 4 columns

Open in standard view

The table of NTP MD5/SHA-1 keys in the current configuration block.

ntpNewCfgMdkeyEntry entry .1.3.6.1.4.1.20301.2.7.21.1.1.4.29.1

Information about an NTP MD5/SHA-1 keys table.

Indexes

ntpNewCfgMdkeyIndex

Column Syntax OID

ntpNewCfgMdkeyIndex

The NTP MD5/SHA-1 Key number for which the NTP MdKey table is related.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.1.1.4.29.1.1

ntpNewCfgMdkeyKey

The character string representing the MD5/SHA-1 Key.

OctetStringr/w

Constraints:
range: 0-20

.1.3.6.1.4.1.20301.2.7.21.1.1.4.29.1.2

ntpNewCfgMdkeyDelete

When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.

Enumerationr/w

Enumerated Values:

1	other
2	delete

.1.3.6.1.4.1.20301.2.7.21.1.1.4.29.1.3

ntpNewCfgKeyType

The NTP key type. 0: MD5, 1: SHA-1.

Enumerationr/w

Enumerated Values:

0	md5
1	sha-1

.1.3.6.1.4.1.20301.2.7.21.1.1.4.29.1.4

agSyslogMsgTable

table

.1.3.6.1.4.1.20301.2.7.21.1.1.5.11 · 1 row entry · 2 columns

Open in standard view

The table of syslog messages.

agSyslogMsgTableEntry entry .1.3.6.1.4.1.20301.2.7.21.1.1.5.11.1

A syslog message stored on the switch.

Indexes

agSyslogMsgIndex

Column	Syntax	OID
agSyslogMsgIndex The syslog message table index.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.1.1.5.11.1.1`
agSyslogMessage The syslog message.	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.20301.2.7.21.1.1.5.11.1.2`

agSyslogMsgTableFabric

table

.1.3.6.1.4.1.20301.2.7.21.1.1.5.30 · 1 row entry · 3 columns

Open in standard view

The table of syslog messages.

agSyslogMsgTableEntryRev entry .1.3.6.1.4.1.20301.2.7.21.1.1.5.30.1

A syslog message stored on the switch.

Indexes

agSyslogSwitchNumber agSyslogMsgIndexRev

Column	Syntax	OID
agSyslogSwitchNumber The configured switch number of any switch, which is part of the node.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.1.1.5.30.1.1`
agSyslogMsgIndexRev The syslog message table index.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.1.1.5.30.1.2`
agSyslogMessageRev The syslog message.	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.20301.2.7.21.1.1.5.30.1.3`

agApplyTable

table

.1.3.6.1.4.1.20301.2.7.21.1.1.8.5 · 1 row entry · 2 columns

Open in standard view

The table of failure reasons for an apply of current
configuration block changes.

agApplyTableEntry entry .1.3.6.1.4.1.20301.2.7.21.1.1.8.5.1

A row in the table of failure reasons for an apply
(information about a particular reason of failure).

Indexes

agApplyIndex

Column	Syntax	OID
agApplyIndex The table index.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.1.1.8.5.1.1`
agApplyString A string in the apply table.	OctetString	`.1.3.6.1.4.1.20301.2.7.21.1.1.8.5.1.2`

agTacacsUserMapCurCfgTable

table

.1.3.6.1.4.1.20301.2.7.21.1.1.11.39 · 1 row entry · 2 columns

Open in standard view

The table of tacacs+ user map current configuration.

agTacacsUserMapCurCfgTableEntry entry .1.3.6.1.4.1.20301.2.7.21.1.1.11.39.1

A row in the tacacs+ user mapping table.

Indexes

agTacacsUserMapCurCfgUId

Column Syntax OID

agTacacsUserMapCurCfgUId

The current config remote privilege identifier.
The identifier value corresponds to the remote privilege.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.1.1.11.39.1.1

agTacacsUserMapCurCfgMapping

Current Tacacs+ user privilege mappings.
The correspondence between the local privilege and the remote privilege is:
- The remote privilege is the privilege identifier value
- The local privilege is the mapped value(u…

Enumeration

Enumerated Values:

0	none
1	user
2	oper
3	admin

.1.3.6.1.4.1.20301.2.7.21.1.1.11.39.1.2

agTacacsUserMapNewCfgTable

table

.1.3.6.1.4.1.20301.2.7.21.1.1.11.40 · 1 row entry · 2 columns

Open in standard view

The table of tacacs+ user map new configuration.

agTacacsUserMapNewCfgTableEntry entry .1.3.6.1.4.1.20301.2.7.21.1.1.11.40.1

A row in the tacacs+ user mapping table.

Indexes

agTacacsUserMapNewCfgUId

Column Syntax OID

agTacacsUserMapNewCfgUId

The new config remote privilege identifier.
The identifier value corresponds to the remote privilege.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.1.1.11.40.1.1

agTacacsUserMapNewCfgMapping

Set new Tacacs+ user privilege mappings.
The correspondence between the local privilege and the remote privilege is:
- The remote privilege is the privilege identifier value
- The local privilege is the mapped value(u…

Enumerationr/w

Enumerated Values:

0	none
1	user
2	oper
3	admin

.1.3.6.1.4.1.20301.2.7.21.1.1.11.40.1.2

agCurCfgMgmtNetTable

table

.1.3.6.1.4.1.20301.2.7.21.1.1.12.2 · 1 row entry · 3 columns

Open in standard view

The table for Management Network definitions
in the current configuration block.

agCurCfgMgmtNetEntry entry .1.3.6.1.4.1.20301.2.7.21.1.1.12.2.1

A row in the management network definition table.

Indexes

agCurCfgMgmtNetIndex

Column	Syntax	OID
agCurCfgMgmtNetIndex The index of the Management Network Definition table.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.1.1.12.2.1.1`
agCurCfgMgmtNetSubnet The Management Network Address in the current configuration block.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.1.1.12.2.1.2`
agCurCfgMgmtNetMask The Management Network Mask/Prefix Length in the current configuration block.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.1.1.12.2.1.3`

agNewCfgMgmtNetTable

table

.1.3.6.1.4.1.20301.2.7.21.1.1.12.3 · 1 row entry · 4 columns

Open in standard view

The table for Management Network definitions
in the new configuration block.

agNewCfgMgmtNetEntry entry .1.3.6.1.4.1.20301.2.7.21.1.1.12.3.1

A row in the management network definition table.

Indexes

agNewCfgMgmtNetIndex

Column Syntax OID

agNewCfgMgmtNetIndex

The index of the Management Network Definition table.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.1.1.12.3.1.1

agNewCfgMgmtNetSubnet

The Management Network Address in the new configuration
block.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.1.1.12.3.1.2

agNewCfgMgmtNetMask

The Management Network Mask/Prefix length in the new configuration
block.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.1.1.12.3.1.3

agNewCfgMgmtNetDelete

By setting the value to delete(2), the entire row is deleted.

Enumerationr/w

Enumerated Values:

1	other
2	delete

.1.3.6.1.4.1.20301.2.7.21.1.1.12.3.1.4

agCfgBootCurTable

table

.1.3.6.1.4.1.20301.2.7.21.1.1.13.7 · 1 row entry · 3 columns

Open in standard view

The table of currently booted settings for the switches.

agCfgBootCurEntry entry .1.3.6.1.4.1.20301.2.7.21.1.1.13.7.1

Currently booted settings for a switches.

Indexes

agCfgBootCurSwNumIndx

Column Syntax OID

agCfgBootCurSwNumIndx

The number of the configured switch.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.1.1.13.7.1.1

agCfgBootCurMTM

This object specifies the current value for MTM.
The available MTM values are:
1455-64F (1)
7309-DFX (2)
7309-DRX (3)
7309-HCM (4)
7309-HCK (5)

Enumeration

Enumerated Values:

1	mtmValue1
2	mtmValue2
3	mtmValue3
4	mtmValue4
5	mtmValue5

.1.3.6.1.4.1.20301.2.7.21.1.1.13.7.1.2

agCfgBootCurESN

The current ESN of the switch.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.1.1.13.7.1.3

agCfgBootNewTable

table

.1.3.6.1.4.1.20301.2.7.21.1.1.13.8 · 1 row entry · 3 columns

Open in standard view

The table of the current booted settings saved for the next reboot.

agCfgBootNewEntry entry .1.3.6.1.4.1.20301.2.7.21.1.1.13.8.1

Current booted settings saved for the next reboot.

Indexes

agCfgBootNewSwNumIndx

Column Syntax OID

agCfgBootNewSwNumIndx

The number of the configured switch.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.1.1.13.8.1.1

agCfgBootNewMTM

This object specifies the current value for MTM.
The available MTM values are:
1455-64F (1)
7309-DFX (2)
7309-DRX (3)
7309-HCM (4)
7309-HCK (5)

Enumerationr/w

Enumerated Values:

1	mtmValue1
2	mtmValue2
3	mtmValue3
4	mtmValue4
5	mtmValue5

.1.3.6.1.4.1.20301.2.7.21.1.1.13.8.1.2

agCfgBootNewESN

Configure the ESN of the switch.

OctetStringr/w

Constraints:
range: 7-11

.1.3.6.1.4.1.20301.2.7.21.1.1.13.8.1.3

agAccessUserCurCfgTable

table

.1.3.6.1.4.1.20301.2.7.21.1.1.19.2 · 1 row entry · 5 columns

Open in standard view

The table of Access user configuration.

agAccessUserCurCfgTableEntry entry .1.3.6.1.4.1.20301.2.7.21.1.1.19.2.1

A row in the Access user configuration table.

Indexes

agAccessUserCurCfgUId

Column Syntax OID

agAccessUserCurCfgUId

The User identifier.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.1.1.19.2.1.1

agAccessUserCurCos

The user class of service.

Enumeration

Enumerated Values:

0	user
3	oper
6	admin

.1.3.6.1.4.1.20301.2.7.21.1.1.19.2.1.2

agAccessUserCurCfgName

The user name. Please note, the max length is 8 in fabric mode.

OctetString

Constraints:
range: 0-64

.1.3.6.1.4.1.20301.2.7.21.1.1.19.2.1.3

agAccessUserCurCfgPswd

The character string representing the user password.

OctetString

Constraints:
range: 0-128

.1.3.6.1.4.1.20301.2.7.21.1.1.19.2.1.4

agAccessUserCurCfgState

User validation (enabled or disabled) in current
configuration block.

Enumeration

Enumerated Values:

2	enabled
3	disabled

.1.3.6.1.4.1.20301.2.7.21.1.1.19.2.1.6

agAccessUserNewCfgTable

table

.1.3.6.1.4.1.20301.2.7.21.1.1.19.3 · 1 row entry · 6 columns

Open in standard view

The table of Access user configuration.

agAccessUserNewCfgTableEntry entry .1.3.6.1.4.1.20301.2.7.21.1.1.19.3.1

A row in the Access user configuration table.

Indexes

agAccessUserNewCfgUId

Column Syntax OID

agAccessUserNewCfgUId

The User identifier.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.1.1.19.3.1.1

agAccessUserNewCos

The user class of service.

Enumerationr/w

Enumerated Values:

0	user
3	oper
6	admin

.1.3.6.1.4.1.20301.2.7.21.1.1.19.3.1.2

agAccessUserNewCfgName

The user name. Please note, the max length is 8 in fabric mode.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.20301.2.7.21.1.1.19.3.1.3

agAccessUserNewCfgPswd

The character string representing the user password.

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.20301.2.7.21.1.1.19.3.1.4

agAccessUserNewCfgState

User validation (enabled or disabled) in new
configuration block.

Enumerationr/w

Enumerated Values:

2	enabled
3	disabled

.1.3.6.1.4.1.20301.2.7.21.1.1.19.3.1.7

agAccessUserNewCfgDelete

This is an action object to create or delete a User.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete a User

Enumerationr/w

Enumerated Values:

1	other
2	delete

.1.3.6.1.4.1.20301.2.7.21.1.1.19.3.1.8

ldapHostCurConfigTable

table

.1.3.6.1.4.1.20301.2.7.21.1.1.21.46 · 1 row entry · 4 columns

Open in standard view

The table for user specified host.

ldapHostCurConfigTableEntry entry .1.3.6.1.4.1.20301.2.7.21.1.1.21.46.1

A row in the user specified host table.

Indexes

ldapHostCurConfigIndex

Column Syntax OID

ldapHostCurConfigIndex

The index of the user specified host table.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.1.1.21.46.1.1

ldapHostCurAddr

Specify the group addr.

OctetString

Constraints:
range: 0-127

.1.3.6.1.4.1.20301.2.7.21.1.1.21.46.1.2

ldapHostCurPort

Specify the group port.

Integer32

Constraints:
range: 1-65000

.1.3.6.1.4.1.20301.2.7.21.1.1.21.46.1.3

ldapHostCurPortType

Specify the host port type.
data-port: Data port
mgt-port: Management port

Enumeration

Enumerated Values:

0	data-port
1	mgt-port

.1.3.6.1.4.1.20301.2.7.21.1.1.21.46.1.4

ldapHostNewConfigTable

table

.1.3.6.1.4.1.20301.2.7.21.1.1.21.47 · 1 row entry · 5 columns

Open in standard view

The table for user specified host.

ldapHostNewConfigTableEntry entry .1.3.6.1.4.1.20301.2.7.21.1.1.21.47.1

A row in the user specified host table.

Indexes

ldapHostNewConfigIndex

Column Syntax OID

ldapHostNewConfigIndex

The index of the user specified host table.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.1.1.21.47.1.1

ldapHostNewAddr

Specify the group addr.

OctetStringr/w

Constraints:
range: 0-127

.1.3.6.1.4.1.20301.2.7.21.1.1.21.47.1.2

ldapHostNewPort

Specify the host port.

Integer32r/w

Constraints:
range: 1-65000

.1.3.6.1.4.1.20301.2.7.21.1.1.21.47.1.3

ldapHostNewPortType

Specify the host port type.
data-port: Data port
mgt-port: Management port

Enumerationr/w

Enumerated Values:

0	data-port
1	mgt-port

.1.3.6.1.4.1.20301.2.7.21.1.1.21.47.1.4

ldapHostNewCfgDelete

This is an action object to create or delete a host.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete a host

Enumerationr/w

Enumerated Values:

1	other
2	delete

.1.3.6.1.4.1.20301.2.7.21.1.1.21.47.1.5

sshPubKeyConfigTable

table

.1.3.6.1.4.1.20301.2.7.21.1.1.22.15 · 1 row entry · 7 columns

Open in standard view

The table for ssh public keys and its users.

sshPubKeyConfigEntry entry .1.3.6.1.4.1.20301.2.7.21.1.1.22.15.1

A row in the ssh public keys tables.

Indexes

sshPubKeyConfigIndex

Column Syntax OID

sshPubKeyConfigIndex

The index of the ssh public key entry.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.1.1.22.15.1.1

sshPubKeyType

Specify the type of the public key.

Enumeration

Enumerated Values:

1	rsa
2	dsa

.1.3.6.1.4.1.20301.2.7.21.1.1.22.15.1.2

sshPubKeyHashValue

The hash value of a specific public key.

OctetString

.1.3.6.1.4.1.20301.2.7.21.1.1.22.15.1.3

sshPubkeyUserBmap

The user list in the key entry. The user are presented in bitmap format.
as follows:

OCTET 1 OCTET 2 OCTET 3 OCTET 4
xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx
|| | | |||| ||__…

OctetString

.1.3.6.1.4.1.20301.2.7.21.1.1.22.15.1.4

sshPubKeyAddUser

Add a new user to a particular public key.
Reminder: The user must be a valid system user.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.20301.2.7.21.1.1.22.15.1.5

sshPubKeyDelUser

Remove a user from the user list of the public key entry.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.20301.2.7.21.1.1.22.15.1.6

sshPubKeyRemEntry

Remove a public key entry.

Enumerationr/w

Enumerated Values:

1	other
2	delete

.1.3.6.1.4.1.20301.2.7.21.1.1.22.15.1.7

sflowCurPortCfgTable

table

.1.3.6.1.4.1.20301.2.7.21.1.1.24.7 · 1 row entry · 4 columns

Open in standard view

The table of sFlow port configuration.

sflowCurPortCfgTableEntry entry .1.3.6.1.4.1.20301.2.7.21.1.1.24.7.1

A row in the sFlow port configuration table.

Indexes

sflowCurPortCfgTableId

Column	Syntax	OID
sflowCurPortCfgTableId sFlow port number.	PortNumber Textual Convention: PortNumber `Unsigned32`	`.1.3.6.1.4.1.20301.2.7.21.1.1.24.7.1.1`
sflowCurPortSampling The current sFlow port sampling rate.	Integer32 Constraints: `range: 256-65536`	`.1.3.6.1.4.1.20301.2.7.21.1.1.24.7.1.2`
sflowCurPortPolling The current sFlow port polling interval.	Integer32 Constraints: `range: 5-60`	`.1.3.6.1.4.1.20301.2.7.21.1.1.24.7.1.3`
sflowCurPortCfgPortAlias The current sFlow port alias.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.1.1.24.7.1.4`

sflowNewPortCfgTable

table

.1.3.6.1.4.1.20301.2.7.21.1.1.24.8 · 1 row entry · 4 columns

Open in standard view

The table of sFlow port configuration.

sflowNewPortCfgTableEntry entry .1.3.6.1.4.1.20301.2.7.21.1.1.24.8.1

A row in the sFlow port configuration table.

Indexes

sflowNewPortCfgTableId

Column	Syntax	OID
sflowNewPortCfgTableId sFlow port number.	PortNumber Textual Convention: PortNumber `Unsigned32`	`.1.3.6.1.4.1.20301.2.7.21.1.1.24.8.1.1`
sflowNewPortSampling The new sFlow port sampling rate. Valid range: 256-65536\| 0 for disable	Integer32r/w Constraints: `range: 256-65536`	`.1.3.6.1.4.1.20301.2.7.21.1.1.24.8.1.2`
sflowNewPortPolling The new sFlow port polling interval. Valid range: 5-60\| 0 for disable	Integer32r/w Constraints: `range: 5-60`	`.1.3.6.1.4.1.20301.2.7.21.1.1.24.8.1.3`
sflowNewPortCfgPortAlias The new sFlow port alias.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.1.1.24.8.1.4`

agQsfp40GCfgTable

table

.1.3.6.1.4.1.20301.2.7.21.1.1.26.1 · 1 row entry · 4 columns

Open in standard view

The QSFP 40G ports configuration table

qsfp40GPortEntry entry .1.3.6.1.4.1.20301.2.7.21.1.1.26.1.1

A row in the QSFP 40G configuration table

Indexes

qsfpPortNumber

Column Syntax OID

qsfpPortNumber

The port number

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.1.1.26.1.1.1

qsfpPortBootedMode

The booted port configuration, either mode10G(1) for 10 G, or
mode40G(2) for 40 G mode.

Enumeration

Enumerated Values:

1	mode10G
2	mode40G

.1.3.6.1.4.1.20301.2.7.21.1.1.26.1.1.2

qsfpPortSavedMode

The saved port configuration, either mode10G(1) for 10 G, or
mode40G(2) for 40 G mode.

Enumerationr/w

Enumerated Values:

1	mode10G
2	mode40G

.1.3.6.1.4.1.20301.2.7.21.1.1.26.1.1.3

qsfpPortAlias

The port alias

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.1.1.26.1.1.4

agPortMapCfgTable

table

.1.3.6.1.4.1.20301.2.7.21.1.1.30.4 · 1 row entry · 3 columns

Open in standard view

The Port Map configuration table

portMapEntry entry .1.3.6.1.4.1.20301.2.7.21.1.1.30.4.1

A row in the Port Map configuration table

Indexes

pmapPortNumber

Column Syntax OID

pmapPortNumber

The port number

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.1.1.30.4.1.1

pmapPortState

The port configuration,
either unmapped(0) for ports that are not mapped, or
mapped(1) for mapped ports.

Enumerationr/w

Enumerated Values:

0	unmapped
1	mapped

.1.3.6.1.4.1.20301.2.7.21.1.1.30.4.1.3

pmapPortAlias

The Port Alias.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.1.1.30.4.1.4

agPortMapSwitchTable

table

.1.3.6.1.4.1.20301.2.7.21.1.1.30.5 · 1 row entry · 3 columns

Open in standard view

The Port Map per switch number information table

portMapSwitchEntry entry .1.3.6.1.4.1.20301.2.7.21.1.1.30.5.1

Port Map information for a switch number

Indexes

pmapSwNumber

Column	Syntax	OID
pmapSwNumber The configured switch number	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.1.1.30.5.1.1`
pmapSwMaxBandwidth The maximum allowed bandwidth	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.1.1.30.5.1.2`
pmapSwUsedBandwidth The bandwidth used in the saved configuration	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.1.1.30.5.1.4`

mpCpuStatsTable

table

.1.3.6.1.4.1.20301.2.7.21.1.2.2.1 · 1 row entry · 6 columns

Open in standard view

The table of CPU utilization statistics. It is deprecated.

mpCpuStatsTableEntry entry .1.3.6.1.4.1.20301.2.7.21.1.2.2.1.1

A row in the CPU utilization stats table. It is deprecated.

Indexes

mpCpuSwitchNumber

Column	Syntax	OID
mpCpuSwitchNumber The number of the configured switch.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.1.2.2.1.1.1`
mpCpuSwitchUUID The UUID of the chassis the embedded switch is in. An empty string is returned for Top of Rack switches.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.20301.2.7.21.1.2.2.1.1.2`
mpCpuStatsUtil1Second The utilization of MP CPU over 1 second. It shows the percentage.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.20301.2.7.21.1.2.2.1.1.3`
mpCpuStatsUtil5Seconds The utilization of MP CPU over 5 seconds. It shows the percentage.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.20301.2.7.21.1.2.2.1.1.4`
mpCpuStatsUtil1Minute The utilization of MP CPU over 1 minute. It shows the percentage.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.20301.2.7.21.1.2.2.1.1.5`
mpCpuStatsUtil5Minutes The utilization of MP CPU over 5 minutes. It shows the percentage.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.20301.2.7.21.1.2.2.1.1.6`

cpuUtilProcessStatsTable

table

.1.3.6.1.4.1.20301.2.7.21.1.2.2.5 · 1 row entry · 9 columns

Open in standard view

The table of CPU utilization per process statistics. It is deprecated.

cpuUtilProcessStatsTableEntry entry .1.3.6.1.4.1.20301.2.7.21.1.2.2.5.1

A row in the CPU utilization stats per process table. It is deprecated.

Indexes

processSwitchNumber processId

Column	Syntax	OID
processSwitchNumber The number of the configured switch.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.1.2.2.5.1.1`
processId The process ID.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.1.2.2.5.1.2`
processSwitchUUID The UUID of the chassis the embedded switch is in. An empty string is returned for Top of Rack switches.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.20301.2.7.21.1.2.2.5.1.3`
processName Process Name.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.20301.2.7.21.1.2.2.5.1.4`
cpuProcessUtil1Sec The utilization of MP CPU over 1 second. It shows the percentage.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.20301.2.7.21.1.2.2.5.1.5`
cpuProcessUtil5Sec The utilization of MP CPU over 5 seconds. It shows the percentage.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.20301.2.7.21.1.2.2.5.1.6`
cpuProcessUtil1Min The utilization of MP CPU over 1 min. It shows the percentage.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.20301.2.7.21.1.2.2.5.1.7`
cpuProcessUtil5Min The utilization of MP CPU over 5 min. It shows the percentage.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.20301.2.7.21.1.2.2.5.1.8`
processStatus Process Status	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.20301.2.7.21.1.2.2.5.1.9`

mpCpuStatsRevTable

table

.1.3.6.1.4.1.20301.2.7.21.1.2.2.7 · 1 row entry · 6 columns

Open in standard view

The table of CPU utilization statistics.

mpCpuStatsRevTableEntry entry .1.3.6.1.4.1.20301.2.7.21.1.2.2.7.1

A row in the CPU utilization stats table.

Indexes

mpCpuSwitchNumberRev

Column	Syntax	OID
mpCpuSwitchNumberRev The number of the configured switch.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.1.2.2.7.1.1`
mpCpuSwitchUUIDRev The UUID of the chassis the embedded switch is in. An empty string is returned for Top of Rack switches.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.20301.2.7.21.1.2.2.7.1.2`
mpCpuStatsUtil1SecondRev The utilization of MP CPU over 1 second. It shows the percentage.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.2.2.7.1.3`
mpCpuStatsUtil5SecondsRev The utilization of MP CPU over 5 seconds. It shows the percentage.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.2.2.7.1.4`
mpCpuStatsUtil1MinuteRev The utilization of MP CPU over 1 minute. It shows the percentage.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.2.2.7.1.5`
mpCpuStatsUtil5MinutesRev The utilization of MP CPU over 5 minutes. It shows the percentage.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.2.2.7.1.6`

cpuUtilProcessStatsRevTable

table

.1.3.6.1.4.1.20301.2.7.21.1.2.2.8 · 1 row entry · 9 columns

Open in standard view

The table of CPU utilization per process statistics.

cpuUtilProcessStatsRevTableEntry entry .1.3.6.1.4.1.20301.2.7.21.1.2.2.8.1

A row in the CPU utilization stats per process table.

Indexes

processSwitchNumberRev processIdRev

Column	Syntax	OID
processSwitchNumberRev The number of the configured switch.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.1.2.2.8.1.1`
processIdRev The process ID.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.1.2.2.8.1.2`
processSwitchUUIDRev The UUID of the chassis the embedded switch is in. An empty string is returned for Top of Rack switches.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.20301.2.7.21.1.2.2.8.1.3`
processNameRev Process Name.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.20301.2.7.21.1.2.2.8.1.4`
cpuProcessUtil1SecRev The utilization of MP CPU over 1 second. It shows the percentage.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.2.2.8.1.5`
cpuProcessUtil5SecRev The utilization of MP CPU over 5 seconds. It shows the percentage.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.2.2.8.1.6`
cpuProcessUtil1MinRev The utilization of MP CPU over 1 min. It shows the percentage.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.2.2.8.1.7`
cpuProcessUtil5MinRev The utilization of MP CPU over 5 min. It shows the percentage.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.2.2.8.1.8`
processStatusRev Process Status	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.20301.2.7.21.1.2.2.8.1.9`

portStatsTable

table

.1.3.6.1.4.1.20301.2.7.21.1.2.3.1 · 1 row entry · 39 columns

Open in standard view

The table of port statistics.

portStatsTableEntry entry .1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1

A row in the port stats table.

Indexes

portStatsIndx

Column Syntax OID

portStatsIndx

The port index.

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.1

portStatsPhyIfInOctets

The total number of octets received on the
interface, including framing characters.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.2

portStatsPhyIfInUcastPkts

The number of subnetwork-unicast packets
delivered to a higher-layer protocol.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.3

portStatsPhyIfInNUcastPkts

The number of non-unicast (i.e., subnetwork-
broadcast or subnetwork-multicast) packets
delivered to a higher-layer protocol.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.4

portStatsPhyIfInDiscards

The number of inbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being deliverable to a
higher-layer protocol. One possible reason for
discarding such a packet co…

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.5

portStatsPhyIfInErrors

The number of inbound packets that contained
errors preventing them from being deliverable to a
higher-layer protocol.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.6

portStatsPhyIfInUnknownProtos

The number of packets received via the interface
which were discarded because of an unknown or
unsupported protocol.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.7

portStatsPhyIfOutOctets

The total number of octets transmitted out of the
interface, including framing characters.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.8

portStatsPhyIfOutUcastPkts

The total number of packets that higher-level
protocols requested be transmitted to a
subnetwork-unicast address, including those that
were discarded or not sent.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.9

portStatsPhyIfOutNUcastPkts

The total number of packets that higher-level
protocols requested be transmitted to a non-
unicast (i.e., a subnetwork-broadcast or
subnetwork-multicast) address, including those
that were discarded or not sent.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.10

portStatsPhyIfOutDiscards

The number of outbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being transmitted. One
possible reason for discarding such a packet could
be to free up buffer s…

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.11

portStatsPhyIfOutErrors

The number of outbound packets that could not be
transmitted because of errors.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.12

portStatsPhyIfOutQLen

The length of the output packet queue (in
packets).

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.13

portStatsPhyIfInBroadcastPkts

The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
broadcast address at this sub-layer.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.14

portStatsPhyIfOutBroadcastPkts

The total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a broadcast address at this sub-layer,
including those that were discarded or not sent.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.15

portStatsClear

Setting this value to clear(2) clears the stats for this port.

Enumerationr/w

Enumerated Values:

1	ok
2	clear

.1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.16

portStatsPhyIfInMulticastPkts

The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
multicast address at this sub-layer.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.17

portStatsPhyIfOutMulticastPkts

The total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a multicast address at this sub-layer,
including those that were discarded or not sent.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.18

portStatsLinkStateChange

Number of link state changes.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.20

portStatsPhyIfInFctlPkts

The number of inbound flow control packets.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.21

portStatsPhyIfOutFctlPkts

The number of outbound flow control packets.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.22

portStatsPhyIfInFctlPktsRate

The number of inbound flow control packets per second.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.23

portStatsPhyIfOutFctlPktsRate

The number of outbound flow control packets per second.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.24

portStatsPhyIfIngDiscdVlan

The number of packets, discarded because of VLAN.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.25

portStatsPhyIfIngDiscdEgrMap

The number of packets, discarded because of empty egress portmap.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.26

portStatsPhyIfIngDiscdFilter

The number of packets, discarded because of filter.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.27

portStatsPhyIfIngDiscdPolicy

The number of packets, discarded because of policy.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.28

portStatsPhyIfIngDiscdNonFwdStat

The number of packets, discarded because of Non-Forwarding State.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.29

portStatsPhyIfIngDiscdIbpCbp

The number of packets discarded because of IBP/CBP.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.30

portStatsDot1PortInFrames

The number of IN frames per port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.31

portStatsDot1PortOutFrames

The number of OUT frames per port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.32

portStatsDot1PortInDiscards

The number of IN packets discarded per port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.33

portStatsDot1TpLearnedEntryDiscards

The number of Dot1Tp learned entries discarded.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.34

portStatsPhyIfEgrHOLBlockDiscd

The number of packets, discarded because of HOL Blocking.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.36

portStatsPhyIfEgrMMUDiscd

The number of packets, discarded by MMU because of zero port bitmap.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.37

portStatsPhyIfEgrCellErrDiscd

The number of packets, discarded because of Cell Errors or purging.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.38

portStatsPhyIfEgrMMUAgeDiscd

The number of packets, discarded because of MMU Aging. Applicable in
10/100 mode, incremented for frames aborted which were deferred for an
excessive period of time.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.39

portStatsPhyIfEgrOtherDiscd

The number of packets, discarded because of Other reasons.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.40

portStatsPortAlias

The port alias.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.41

portMgmtStatsTable

table

.1.3.6.1.4.1.20301.2.7.21.1.2.3.3 · 1 row entry · 16 columns

Open in standard view

The table of port statistics.

portMgmtStatsTableEntry entry .1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1

A row in the management port stats table.

Indexes

portMgmtStatsIndx

Column	Syntax	OID
portMgmtStatsIndx The management port index.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.1`
portMgmtStatsRxBytes The total number of bytes received.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.2`
portMgmtStatsTxBytes The total number of bytes transmitted.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.3`
portMgmtStatsRxpackets Total number of packet allocations from the packet buffer pool by the TCP/IP protocol stack.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.4`
portMgmtStatsTxpackets Total number of packet allocations from the packet buffer pool by the TCP/IP protocol stack.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.5`
portMgmtStatsRxErrors The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.6`
portMgmtStatsTxErrors The number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.7`
portMgmtStatsRxDropped The number of inbound packets that were dropped.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.8`
portMgmtStatsTxDropped The number of outbound packets that were dropped.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.9`
portMgmtStatsRxOverruns The number of data overruns over this link.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.10`
portMgmtStatsTxOverruns The number of data overruns over this link.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.11`
portMgmtStatsRxFrame The number of frames received on this link.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.12`
portMgmtStatsTxCarrier The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a this interface.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.13`
portMgmtStatsRxMulticast The total number of multicast packets received.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.14`
portMgmtStatsTxCollisions The number of collisions on this outbound segment.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.15`
portMgmtStatsPortAlias The port alias.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.16`

allportsStatsTable

table

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4 · 1 row entry · 42 columns

Open in standard view

The table of all ports statistics.

allportsStatsTableEntry entry .1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1

A row in the table of all ports statistics.

Indexes

allportsStatsIndx

Column Syntax OID

allportsStatsIndx

The port number.

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.1

allportsStatsDescr

The port description.

OctetString

Constraints:
range: 0-7

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.2

allportsStatsSpeed

The current operational speed of the port.

Enumeration

Enumerated Values:

2	mbs10
3	mbs100
4	mbs1000
5	any
6	mbs10000
7	mbs40000

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.3

allportsStatsPhysAddress

The port MAC Address.

SNMPv2-TCPhysAddress

Textual Convention: SNMPv2-TCPhysAddress OctetString

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.4

allportsStatsAdminStatus

The port Admin state.

Enumeration

Enumerated Values:

1	up
2	down
3	testing

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.5

allportsStatsOperStatus

The port Operational Status.

Enumeration

Enumerated Values:

1	up
2	down
3	testing

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.6

allportsStatsInOctets

Octets In for port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.7

allportsStatsOutOctets

Octets Out for port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.8

allportsStatsInPkts

Packets In for port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.9

allportsStatsOutPkts

Packets Out for port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.10

allportsStatsInUcast

Unicast Packets In for port.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.11

allportsStatsOutUcast

Unicast Packets Out for port.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.12

allportsStatsInBcast

Broadcasts Packets In for port.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.13

allportsStatsOutBcast

Broadcasts Packets Out for port.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.14

allportsStatsInMcast

Multicast Packets In for port.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.15

allportsStatsOutMcast

Multicast Packets Out for port.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.16

allportsStatsInDiscards

Discarded Packets for port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.17

allportsStatsOutDiscards

Outbound Packets for port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.18

allportsStatsInErrors

Error Packets for port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.19

allportsStatsOutErrors

Not sent packets due to error.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.20

allportsStatsInUnknownProtos

Unknown protocol packets.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.21

allportsStatsOutQLen

Outbound Packet Queue Length.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.22

allportsStatsipInReceives

Ip In Receives.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.23

allportsStatsipInHeaderErrors

Ip In Header Errors.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.24

allportsStatsipInDiscards

Ip In Discards.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.25

allportsStatsLinkStateChange

Number of link state changes.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.26

allportsStatsipInReceivesRate

Ip In Receives rate.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.27

allportsStatsipInHeaderErrorsRate

Ip In Header Errors rate.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.28

allportsStatsipInDiscardsRate

Ip In Discards rate.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.29

allportsStatsInOctetsRate

Octets In rate for port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.30

allportsStatsOutOctetsRate

Octets Out rate for port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.31

allportsStatsInUcastRate

Unicast Packets In rate for port.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.32

allportsStatsOutUcastRate

Unicast Packets Out rate for port.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.33

allportsStatsInBcastRate

Broadcasts Packets In rate for port.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.34

allportsStatsOutBcastRate

Broadcasts Packets Out rate for port.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.35

allportsStatsInMcastRate

Multicast Packets In rate for port.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.36

allportsStatsOutMcastRate

Multicast Packets Out rate for port.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.37

allportsStatsInDiscardsRate

Discarded In Packets rate for port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.38

allportsStatsOutDiscardsRate

Discarded Out Packets rate for port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.39

allportsStatsInErrorsRate

Erroneus inbound packets rate for port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.40

allportsStatsOutErrorsRate

Not sent packets due to error rate.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.41

allportsStatsPortAlias

The port alias.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.42

dot1RateStatsTable

table

.1.3.6.1.4.1.20301.2.7.21.1.2.3.7 · 1 row entry · 6 columns

Open in standard view

The table of bridging statistics per second.

dot1RateStatsTableEntry entry .1.3.6.1.4.1.20301.2.7.21.1.2.3.7.1

Bridging statistics per second.

Indexes

dot1RateStatsIndx

Column	Syntax	OID
dot1RateStatsIndx The port index.	PortNumber Textual Convention: PortNumber `Unsigned32`	`.1.3.6.1.4.1.20301.2.7.21.1.2.3.7.1.1`
dot1RatePortInFrames The number of frames that have been received per second by this port from its segment.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.2.3.7.1.2`
dot1RatePortOutFrames The number of frames that have been transmitted per second by this port to its segment.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.2.3.7.1.3`
dot1RatePortInDiscards Count of valid frames received which were discarded per second.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.2.3.7.1.4`
dot1RateTpLearnedEntryDiscards The number per second of Forwarding Database entries, which have been or would have been learnt, but have been discarded due to a lack of space to store them.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.2.3.7.1.5`
dot1RatePortAlias The port alias.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.1.2.3.7.1.9`

dot3RateStatsTable

table

.1.3.6.1.4.1.20301.2.7.21.1.2.3.8 · 1 row entry · 14 columns

Open in standard view

The table of Ethernet statistics per second.

dot3RateStatsTableEntry entry .1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1

Ethernet statistics per second.

Indexes

dot3RateStatsIndx

Column	Syntax	OID
dot3RateStatsIndx The port index.	PortNumber Textual Convention: PortNumber `Unsigned32`	`.1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.1`
dot3RateStatsAlignmentErrors A count of frames received per second on a particular interface that are not an integral number of octets in length and do not pass the FCS check.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.2`
dot3RateStatsFCSErrors A count of frames received per second on a particular interface that are an integral number of octets in length but do not pass the FCS check.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.3`
dot3RateStatsSingleCollisionFrames A count of successfully transmitted frames per second on a particular interface for which transmission is inhibited by exactly one collision.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.4`
dot3RateStatsMultipleCollisionFrames A count of successfully transmitted frames per second on a particular interface for which transmission is inhibited by more than one collision.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.5`
dot3RateStatsSQETestErrors A count of times that the SQE TEST ERROR message is generated per second by the PLS sublayer for a particular interface.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.6`
dot3RateStatsDeferredTransmissions A count per second of frames for which the first transmission attempt on a particular interface is delayed because the medium is busy.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.7`
dot3RateStatsLateCollisions The number of times per second that a collision is detected on a particular interface later than 512 bit-times into the transmission of a packet.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.8`
dot3RateStatsExcessiveCollisions A count per second of frames for which transmission on a particular interface fails due to excessive collisions.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.9`
dot3RateStatsInternalMacTransmitErrors A count per second of frames for which transmission on a particular interface fails due to an internal MAC sublayer transmit error.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.10`
dot3RateStatsCarrierSenseErrors The number of times per second that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particular interface.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.11`
dot3RateStatsFrameTooLongs A count per second of frames received on a particular interface that exceed the maximum permitted frame size.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.12`
dot3RateStatsInternalMacReceiveErrors A count per second of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.13`
dot3RatePortAlias The port alias.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.14`

aclStatsTable

table

.1.3.6.1.4.1.20301.2.7.21.1.2.11.1 · 1 row entry · 3 columns

Open in standard view

The table of ACL statistics.

aclStatsTableEntry entry .1.3.6.1.4.1.20301.2.7.21.1.2.11.1.1

Statistics about a particular ACL configuration entry.

Indexes

aclStatsIndex

Column Syntax OID

aclStatsIndex

The acl index.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.1.2.11.1.1.1

aclStatsHits

Total number of hits for this ACL entry

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.11.1.1.2

aclClearStats

Setting this value to clear(2) clears the stats for the ACL.

Enumerationr/w

Enumerated Values:

1	ok
2	clear

.1.3.6.1.4.1.20301.2.7.21.1.2.11.1.1.3

vmapStatsTable

table

.1.3.6.1.4.1.20301.2.7.21.1.2.11.2 · 1 row entry · 3 columns

Open in standard view

The table of VMAP statistics.

vmapStatsTableEntry entry .1.3.6.1.4.1.20301.2.7.21.1.2.11.2.1

Statistics about a particular VMAP configuration entry.

Indexes

vmapStatsIndex

Column Syntax OID

vmapStatsIndex

The vmap index.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.1.2.11.2.1.1

vmapStatsHits

Total number of hits for this VMAP entry

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.11.2.1.2

vmapClearStats

Setting this value to clear(2) clears the stats for the VMAP.

Enumerationr/w

Enumerated Values:

1	ok
2	clear

.1.3.6.1.4.1.20301.2.7.21.1.2.11.2.1.3

acl6StatsTable

table

.1.3.6.1.4.1.20301.2.7.21.1.2.11.3 · 1 row entry · 3 columns

Open in standard view

The table of IPv6 ACL statistics.

acl6StatsTableEntry entry .1.3.6.1.4.1.20301.2.7.21.1.2.11.3.1

Statistics about a particular IPv6 ACL configuration entry.

Indexes

aclStatsIndex

Column Syntax OID

acl6StatsIndex

The ipv6 acl index.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.1.2.11.3.1.1

acl6StatsHits

Total number of hits for this IPv6 ACL entry

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.2.11.3.1.2

acl6ClearStats

Setting this value to clear(2) clears the stats for the IPv6 ACL.

Enumerationr/w

Enumerated Values:

1	ok
2	clear

.1.3.6.1.4.1.20301.2.7.21.1.2.11.3.1.3

memoryStatsTable

table

.1.3.6.1.4.1.20301.2.7.21.1.2.12.1 · 1 row entry · 10 columns

Open in standard view

The table of memory statistics

memoryStatsEntry entry .1.3.6.1.4.1.20301.2.7.21.1.2.12.1.1

Statistics about of memory

Indexes

switchNumber

Column	Syntax	OID
switchNumber The number of the configured switch.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.1.2.12.1.1.1`
switchUUID The UUID of the chassis the embedded switch is in. An empty string is returned for Top of Rack switches.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.20301.2.7.21.1.2.12.1.1.2`
totalMemoryStats The total memory in bytes.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.20301.2.7.21.1.2.12.1.1.3`
memoryFreeStats The free memory in bytes.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.20301.2.7.21.1.2.12.1.1.4`
memorySharedStats The shared memory in bytes.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.20301.2.7.21.1.2.12.1.1.5`
memoryBufferStats The buffer memory in bytes.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.20301.2.7.21.1.2.12.1.1.6`
swapTotalStats The total swap memory in bytes.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.20301.2.7.21.1.2.12.1.1.7`
swapFreeStats The free swap memory in bytes.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.20301.2.7.21.1.2.12.1.1.8`
highTotalStats The total high memory in bytes.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.20301.2.7.21.1.2.12.1.1.9`
highFreeStats The free high memory in bytes.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.20301.2.7.21.1.2.12.1.1.10`

tcpControlBlocksTable

table

.1.3.6.1.4.1.20301.2.7.21.1.2.21.1 · 1 row entry · 8 columns

Open in standard view

All TCP allocated control blocks

tcpControlBlocksTableEntry entry .1.3.6.1.4.1.20301.2.7.21.1.2.21.1.1

A row in the TCP control blocks table.

Indexes

tcpControlBlocksIndx

Column	Syntax	OID
tcpControlBlocksIndx The TCP blocks index.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.1.2.21.1.1.1`
destAddr The TCP block destination address.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.1.2.21.1.1.2`
remotePort Tcp informations concerning the remote port	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.2.21.1.1.3`
sourceAddr IP address of the source of the Tcp block	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.1.2.21.1.1.4`
localPort Tcp informations concerning the local port	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.2.21.1.1.5`
state The state of the Tcp	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.1.2.21.1.1.6`
portType The type of the local port	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.1.2.21.1.1.7`
portState The state of the local port	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.1.2.21.1.1.8`

tcpMGMTControlBlocksTable

table

.1.3.6.1.4.1.20301.2.7.21.1.2.21.2 · 1 row entry · 6 columns

Open in standard view

All TCP allocated control blocks on MGMT port

tcpMGMTTableEntry entry .1.3.6.1.4.1.20301.2.7.21.1.2.21.2.1

A row in the TCP on MGMT port table.

Indexes

tcpMGMTIndx

Column	Syntax	OID
tcpMGMTIndx Index in the tcpMGMTControlBlocksTable table.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.1.2.21.2.1.1`
recvQ The size of the received TCP queue.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.1.2.21.2.1.2`
sentQ The size of the sent TCP blocks queue.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.1.2.21.2.1.3`
localAddress The local address for the TCP.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.1.2.21.2.1.4`
foreignAddress The remote address for the TCP.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.1.2.21.2.1.5`
stateMgmt The port's state.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.1.2.21.2.1.6`

udpControlBlocksTable

table

.1.3.6.1.4.1.20301.2.7.21.1.2.22.1 · 1 row entry · 2 columns

Open in standard view

All UDP control blocks in use

udpControlBlocksTableEntry entry .1.3.6.1.4.1.20301.2.7.21.1.2.22.1.1

A row in the UDP control blocks table.

Indexes

udpMpLocalPort

Column	Syntax	OID
udpMpLocalPort The current UDP local port.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.1.2.22.1.1.1`
udpMpState The port's state.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.1.2.22.1.1.2`

udpMGMTControlBlocksTable

table

.1.3.6.1.4.1.20301.2.7.21.1.2.22.2 · 1 row entry · 6 columns

Open in standard view

All UDP control blocks allocated  on MGMT port

udpMGMTTableEntry entry .1.3.6.1.4.1.20301.2.7.21.1.2.22.2.1

A row in the UDP on MGMT port table.

Indexes

udpMGMTIndx

Column	Syntax	OID
udpMGMTIndx Index in the udpMGMTControlBlocksTable table.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.1.2.22.2.1.1`
recvQUdp The size of the received UDP queue.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.1.2.22.2.1.2`
sentQUdp The size of the sent UDP blocks queue.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.1.2.22.2.1.3`
localAddressUdp The local address for the UDP.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.1.2.22.2.1.4`
foreignAddressUdp The remote address for the UDP.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.1.2.22.2.1.5`
stateMgmtUdp The port's state.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.1.2.22.2.1.6`

hwInfoTable

table

.1.3.6.1.4.1.20301.2.7.21.1.3.1.1 · 1 row entry · 25 columns

Open in standard view

The table with the hardware information for the switches in the fabric.

hwInfoTableEntry entry .1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1

Hardware related information for a switch in the fabric.

Indexes

hwInfoSwitchNumber

Column Syntax OID

hwInfoSwitchNumber

The number of the attached switch.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.1

hwInfoSwitchUUID

The UUID of the chassis the embedded switch is in.
An empty string is returned for Top of Rack switches.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.2

hwInfoPartNumber

The hardware part number of the Switch.

OctetString

Constraints:
range: 0-16

.1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.3

hwInfoRevision

The hardware revision. If the revision is not
available, a zero length string should be returned.

OctetString

Constraints:
range: 0-16

.1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.4

hwInfoLastBoot

Time and reason of the last boot.

OctetString

Constraints:
range: 0-64

.1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.5

hwInfoMACAddress

The MAC address.

SNMPv2-TCPhysAddress

Textual Convention: SNMPv2-TCPhysAddress OctetString

.1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.6

hwInfoSerialNumber

The switch serial number.

OctetString

Constraints:
range: 0-48

.1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.7

hwInfoSwitchSoftwareVersion

The switch software version.

OctetString

Constraints:
range: 0-128

.1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.8

hwInfoFlashConfiguration

The active flash configuration.

OctetString

Constraints:
range: 0-48

.1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.9

hwInfoManufacturingDate

The date of manufacturing.

OctetString

Constraints:
range: 0-48

.1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.10

hwInfoPanicDump

There is the panic dump file on the switch. yes -there is file, no - there is no file

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.11

hwInfoFanStatus

The fan status on the system.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.12

hwInfoFanSpeed

The fan speed on the system.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.13

hwInfoTempSensors

The temperature sensors on the system.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.14

hwInfoGlobalHealthStatus

This variable summarizes the statuses of several key elements of the device.
OK:
- All temperature sensors are below the warning threshold (eg. < 85 C);
- All fans are running at >= 100 RPMs;
- Both power suppl…

Enumeration

Enumerated Values:

1	ok
2	noncritical
3	critical

.1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.15

hwInfoPCBAPartNumber

The PCBA part number.

OctetString

Constraints:
range: 0-48

.1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.16

hwInfoHardwareRevision

The hardware revision. If the revision is not
available, a zero length string should be returned.

OctetString

Constraints:
range: 0-48

.1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.17

hwInfoPLDFirmwareVersion

The PLD Firmware Version.

OctetString

Constraints:
range: 0-48

.1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.18

hwInfoTemperatureWarn

The temperature Warning

OctetString

Constraints:
range: 0-48

.1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.20

hwInfoTemperatureShut

The temperature Shutdown

OctetString

Constraints:
range: 0-48

.1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.21

hwInfoTemperatureIn

The temperature Inlet

OctetString

Constraints:
range: 0-48

.1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.22

hwInfoTemperatureOut

The temperature Exhaust

OctetString

Constraints:
range: 0-48

.1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.23

hwInfoPowerConsumption

The switch power consumption.

OctetString

Constraints:
range: 0-48

.1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.24

hwInfoESN

The ESN of the switch.

OctetString

Constraints:
range: 0-12

.1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.25

hwInfoMTM

This object specifies the value for MTM.
The available MTM values are:
7159-DFX (1)
7159-DRX (2)
7159-HCM (3)
7159-HCK (4)
7120-64F (5)

OctetString

Constraints:
range: 0-7

.1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.26

hwPCIUnitTable

table

.1.3.6.1.4.1.20301.2.7.21.1.3.1.25 · 1 row entry · 2 columns

Open in standard view

The table with PCI units on board.

hwPCIUnitTableEntry entry .1.3.6.1.4.1.20301.2.7.21.1.3.1.25.1

A row in the PCI units table.

Indexes

hwPCIUnitId

Column	Syntax	OID
hwPCIUnitId The Unit identifier.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.1.3.1.25.1.1`
hwPCIInfo Unit information	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.1.3.1.25.1.2`

portInfoTable

table

.1.3.6.1.4.1.20301.2.7.21.1.3.2.1 · 1 row entry · 18 columns

Open in standard view

The table of port information.

portInfoTableEntry entry .1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1

A row in the port information table.

Indexes

portInfoIndx

Column Syntax OID

portInfoIndx

The port index.

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.1

portInfoSpeed

The current operational speed of the port.

Enumeration

Enumerated Values:

2	mbs10
3	mbs100
4	mbs1000
5	any
6	mbs10000
7	mbs40000

.1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.2

portInfoMode

The current operational mode of the port.

Enumeration

Enumerated Values:

2	full-duplex
3	half-duplex

.1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.3

portInfoFlowCtrl

The current operational flow control of the port.

Enumeration

Enumerated Values:

2	transmit
3	receive
4	both
5	none

.1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.4

portInfoLink

The current operational link status of the port.

Enumeration

Enumerated Values:

1	up
2	down
3	disabled
4	inoperative
5	errdisabled
6	detached

.1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.5

portInfoPhyIfDescr

A textual string containing information about the
interface. This string should include the name of
the manufacturer, the product name and the version
of the hardware interface.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.6

portInfoPhyIfType

The type of interface, distinguished according to
the physical/link protocol(s) immediately `below'
the network layer in the protocol stack.

Enumeration

Enumerated Values:

1	other
2	regular1822
3	hdh1822
4	ddn-x25
5	rfc877-x25
6	ethernet-csmacd
7	iso88023-csmacd
8	iso88024-tokenBus
9	iso88025-tokenRing
10	iso88026-man
11	starLan
12	proteon-10Mbit
13	proteon-80Mbit
14	hyperchannel
15	fddi
16	lapb
17	sdlc
18	ds1
19	e1
20	basicISDN
21	primaryISDN
22	propPointToPointSerial
23	ppp
24	softwareLoopback
25	eon
26	ethernet-3Mbit
27	nsip
28	slip
29	ultra
30	ds3
31	sip
32	frame-relay

.1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.7

portInfoPhyIfMtu

The size of the largest datagram which can be
sent/received on the interface, specified in
octets. For interfaces that are used for
transmitting network datagrams, this is the size
of the largest network datagram that …

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.8

portInfoPhyIfPhysAddress

The interface's address at the protocol layer
immediately `below' the network layer in the
protocol stack. For interfaces which do not have
such an address (e.g., a serial line), this object
should contain an octet stri…

SNMPv2-TCPhysAddress

Textual Convention: SNMPv2-TCPhysAddress OctetString

.1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.9

portInfoPhyIfOperStatus

The current operational state of the interface.
The testing(3) state indicates that no operational
packets can be passed.

Enumeration

Enumerated Values:

1	up
2	down
3	testing

.1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.10

portInfoPhyIfLastChange

The value of sysUpTime at the time the interface
entered its current operational state. If the
current state was entered prior to the last re-
initialization of the local network management
subsystem, then this object …

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.11

portInfoLearning

The port L2 (FDB) Learning state.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.18

portInfoType

The type of the port.

Enumeration

Enumerated Values:

1	fabric
2	remoteMgmt
3	localMgmt
4	mgmt
7	internal
8	external

.1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.19

portInfoPvid

This is the operational port vlan-id of the port. Typically,
the value of this object is the same as the value of the
agPortCurCfgPVID object. But if, for example, 802.1x is
enabled on the port and the port is assigned …

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.21

portInfoVlanTag

This is the operational VLAN tag state of the port. Typically,
the value of this object is the same as the value of the
agPortCurCfgVlanTag objec. But if, for example, 802.1x is
enabled on the port and if the port is as…

Enumeration

Enumerated Values:

0	untagged
1	tagged

.1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.22

portInfoErrDisableRecovery

This object indicates whether the system will automatically
re-enable an error-disabled port after the time interval
indicated by agCurCfgErrDisableTimeout has elapsed. A port
is in error-disabled state when it has been…

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.23

portInfoErrDisableTimeLeft

If the portInfoErrDisableRecovery object has a value of 'enable'
and the portInfoLink object has a value of 'errdisabled', the
value of this object indicates the remaining time, in seconds,
before the system automatical…

Integer32

Constraints:
range: 0-86400

.1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.24

portInfoAlias

The alias of the row in portInfo configuration table.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.27

agSwFeaturesTable

table

.1.3.6.1.4.1.20301.2.7.21.1.3.3.15 · 1 row entry · 2 columns

Open in standard view

The table for software key features.

agSwFeaturesEntry entry .1.3.6.1.4.1.20301.2.7.21.1.3.3.15.1

A row in the software key features table.

Indexes

agSwFeaturesSwitchNumber

Column	Syntax	OID
agSwFeaturesSwitchNumber The number of the software key features switch.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.1.3.3.15.1.1`
agSwFeatureKeys The software keys information on the switch.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.1.3.3.15.1.2`

agDiffTable

table

.1.3.6.1.4.1.20301.2.7.21.1.3.4.4 · 1 row entry · 2 columns

Open in standard view

The table of diff strings.

agDiffTableEntry entry .1.3.6.1.4.1.20301.2.7.21.1.3.4.4.1

An entry in the diff table.

Indexes

agDiffIndex

Column	Syntax	OID
agDiffIndex The table index.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.1.3.4.4.1.1`
agDiffString A string in the diff table.	OctetString	`.1.3.6.1.4.1.20301.2.7.21.1.3.4.4.1.2`

agCfgDumpTable

table

.1.3.6.1.4.1.20301.2.7.21.1.3.5.4 · 1 row entry · 2 columns

Open in standard view

The table of dump strings.

agCfgDumpTableEntry entry .1.3.6.1.4.1.20301.2.7.21.1.3.5.4.1

An entry in the dump table.

Indexes

agCfgDumpIndex

Column	Syntax	OID
agCfgDumpIndex The table index.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.1.3.5.4.1.1`
agCfgDumpString A string in the dump table.	OctetString	`.1.3.6.1.4.1.20301.2.7.21.1.3.5.4.1.2`

geaportInfoTable

table

.1.3.6.1.4.1.20301.2.7.21.1.3.9.1 · 1 row entry · 4 columns

Open in standard view

The table of gea port mapping.

geaportInfoTableEntry entry .1.3.6.1.4.1.20301.2.7.21.1.3.9.1.1

An entry in the geaport table mapping.

Indexes

geaportInfoLogicalIndex

Column	Syntax	OID
geaportInfoLogicalIndex The logical port index.	PortNumber Textual Convention: PortNumber `Unsigned32`	`.1.3.6.1.4.1.20301.2.7.21.1.3.9.1.1.1`
geaportInfoAlias The GEA Port Alias.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.1.3.9.1.1.2`
geaportInfoPort The GEA Port (0-based).	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.1.3.9.1.1.3`
geaportInfoUnit The GEA Unit.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.1.3.9.1.1.4`

chassisInfoTable

table

.1.3.6.1.4.1.20301.2.7.21.1.3.10.1 · 1 row entry · 18 columns

Open in standard view

The table of chassisInfo

chassisInfoEntry entry .1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1

Information about the chassis

Indexes

embeddedSwitchNumber

Column Syntax OID

embeddedSwitchNumber

The number of the attached embedded switch.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.1

chassisInfoSwitchModuleBay

Switch Module Bay Number.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.2

chassisInfoType

The Type of Chassis

Enumeration

Enumerated Values:

1	bladeCenterHT
2	bladeCenterST
3	bladeCenterT
4	bladeCenterH
5	bladeCenterS
6	flexEnterprise
7	harrier
8	pelican
9	bladeCenterE
10	flexCarrier
11	tracewell4
12	tracewell8
13	tracewell7

.1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.3

chassisInfoPOSTResults

POST Results.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.4

mmcDefaultConfiguration

Management Module Control's Default Configuration

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.5

mmcSkipExtendedMemoryTest

Management Module Control Skip Extended Memory Test.

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.6

mmcDisableNonCMMPorts

Management Module Control Disable Non-CMM Ports.

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.7

mmcPOSTDiagnosticsControl

Management Module Control POST Diagnostics Control.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.8

mmcControlRegister

Management Module Control Control Register.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.9

mmcExtendedControlRegister

Management Module Control Extended Control Register.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.10

mmspDevicePowerUpComplete

Management Module Status Reporting Device PowerUp Complete.

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.11

mmspOverCurrentFault

Management Module Status Reporting Over Current Fault.

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.12

mmspFaultLED

Management Module Status Reporting Fault LED.

Enumeration

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.13

mmspPrimaryTemperatureWarning

Management Module Status Reporting Primary Temperature Warning.

Enumeration

Enumerated Values:

1	exceeded
2	ok

.1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.14

mmspSecondaryTemperatureWarning

Management Module Status Reporting Secondary Temperature Warning.

Enumeration

Enumerated Values:

1	exceeded
2	ok

.1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.15

mmspStatusRegister

Management Module Status Reporting Status Register.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.16

mmspExtendedStatus

Management Module Status Reporting Extended Status.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.17

chassisInfoUUID

Chassis UUID

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.18

sfpInfoTable

table

.1.3.6.1.4.1.20301.2.7.21.1.3.11.1 · 1 row entry · 14 columns

Open in standard view

The table of external port SFP information.

sfpInfoTableEntry entry .1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1

A row in the external port SFP information table.

Indexes

sfpInfoIndx

Column Syntax OID

sfpInfoIndx

The external port SFX index.

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.1

sfpInfoPortAlias

External Port SFP/XFP alias.

OctetString

Constraints:
range: 0-6

.1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.2

sfpInfoDevice

External Port SFP/XFP Device.

OctetString

Constraints:
range: 0-6

.1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.3

sfpInfoTXEnable

External Port SFP/XFP TX-Enable.

Enumeration

Enumerated Values:

1	notInstalled
2	enabled
3	disabled
4	detached
5	notAvailable

.1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.4

sfpInfoRXSignal

External Port SFP/XFP RX-Signal.

Enumeration

Enumerated Values:

1	notInstalled
2	down
3	link
4	notAvailable
5	detached

.1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.5

sfpInfoTXFault

External Port SFP/XFP TX-Fault.

Enumeration

Enumerated Values:

1	notInstalled
2	fault
3	none
4	notAvailable
5	detached

.1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.6

sfpInfoApproved

External Port SFP/XFP Approval.

Enumeration

Enumerated Values:

1	notInstalled
2	notApproved
3	sfpApproved
4	detached
5	sfpAccepted
6	sfpRestrict
7	sfpUnsupprt

.1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.7

sfpInfoVendor

External Port SFP/XFP device vendor.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.8

sfpInfoSerial

External Port SFP/XFP device serial.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.9

sfpInfoPartNumber

External Port SFP/XFP device part number.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.10

sfpInfoRevision

External Port SFP/XFP device revision.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.11

sfpInfoVoltage

External Port SFP/XFP device voltage.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.12

sfpInfoTemperature

External Port SFP/XFP device temperature.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.13

sfpInfoWaveLength

External Port SFP/XFP device laser wave length.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.14

vmGroupInfoTbl

table

.1.3.6.1.4.1.20301.2.7.21.1.3.12.1 · 1 row entry · 14 columns

Open in standard view

Virtual MAC information table

vmGroupInfolistEntry entry .1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1

The run-time information about a virtual machine

Indexes

vmGroupInfoIdx

Column	Syntax	OID
vmGroupInfoIdx Table index, 1 based.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.1`
vmGroupInfoMac The virtual machine MAC address.	SNMPv2-TCPhysAddress Textual Convention: SNMPv2-TCPhysAddress `OctetString`	`.1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.2`
vmGroupInfoIP The virtual machine IP address.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.3`
vmGroupInfoPortIdx System port connected to the virtual machine.	PortNumber Textual Convention: PortNumber `Unsigned32`	`.1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.4`
vmGroupInfoGroup The virtual machine group.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.5`
vmGroupInfoVlan The virtual machine VLAN	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.6`
vmGroupInfoIsESXSvcCon Set to 1 if ESX Service Console Interface, else 0.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.7`
vmGroupInfoIsVMK Set to 1 if VM Kernel Interface, else 0.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.8`
vmGroupInfoName Virtual Machine Name, if available.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.9`
vmGroupInfoUUID Virtual Machine UUID, if available.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.10`
vmGroupInfoVSwitch Virtual Machine VSwitch, if available.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.11`
vmGroupInfoPortGroup Virtual Machine Port Group, if available.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.12`
vmGroupInfoHost Virtual Machine Host, if available.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.13`
vmGroupInfoPortAlias System port alias.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.14`

accessUserInfoTable

table

.1.3.6.1.4.1.20301.2.7.21.1.3.13.3 · 1 row entry · 4 columns

Open in standard view

The table of user information.

accessUserInfoTableEntry entry .1.3.6.1.4.1.20301.2.7.21.1.3.13.3.1

An entry in the user information table.

Indexes

accessUserInfoIndex

Column Syntax OID

accessUserInfoIndex

The table index. The index value corresponds to the same value
of agAccessUserCurCfgUId for the user.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.1.3.13.3.1.1

accessUserInfoLockState

Lock State of a specific user, unlocked(1) or locked(2).
When the state is locked the user is not allowed to login
until the account is unlocked by the administrator.

Enumeration

Enumerated Values:

1	unlocked
2	locked

.1.3.6.1.4.1.20301.2.7.21.1.3.13.3.1.2

accessUserInfoClearFailAttempts

Action Object. When set to clear(2), clears
the unsuccessful attempts of a particular user.
Otherwise nothing is done.
ok(1) is returned always when read.

Enumerationr/w

Enumerated Values:

1	ok
2	clear

.1.3.6.1.4.1.20301.2.7.21.1.3.13.3.1.3

accessUserInfoClearLock

Action Object. When set to clear(2), unlock a particular user.
Otherwise nothing is done.
ok(1) is returned always when read.

Enumerationr/w

Enumerated Values:

1	ok
2	clear

.1.3.6.1.4.1.20301.2.7.21.1.3.13.3.1.4

agPortOperTable

table

.1.3.6.1.4.1.20301.2.7.21.1.4.1 · 1 row entry · 5 columns

Open in standard view

The table of port operations.

agPortOperTableEntry entry .1.3.6.1.4.1.20301.2.7.21.1.4.1.1

A row in the port operations table.

Indexes

portOperIdx

Column Syntax OID

portOperIdx

The port index.

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.1.4.1.1.1

portOperState

Enable/Disable port.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.1.4.1.1.2

portOperRmon

Enable/Disable RMON for port.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.1.4.1.1.3

portOperLearning

Enable/Disable L2 (FDB) Learning for this port.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.1.4.1.1.4

portOperAlias

The port alias..

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.1.4.1.1.5

vlanCurCfgTable

table

.1.3.6.1.4.1.20301.2.7.21.2.1.1.2 · 1 row entry · 7 columns

Open in standard view

The table of VLAN configuration.

vlanCurCfgTableEntry entry .1.3.6.1.4.1.20301.2.7.21.2.1.1.2.1

A row in the VLAN configuration table.

Indexes

vlanCurCfgVlanId

Column Syntax OID

vlanCurCfgVlanId

The VLAN identifier.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.1.1.2.1.1

vlanCurCfgPorts

The port list in the VLAN. The ports are presented in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
…

OctetString

.1.3.6.1.4.1.20301.2.7.21.2.1.1.2.1.2

vlanCurCfgState

Enable or disable a VLAN

Enumeration

Enumerated Values:

2	enabled
3	disabled

.1.3.6.1.4.1.20301.2.7.21.2.1.1.2.1.3

vlanCurCfgVlanName

The VLAN name.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.20301.2.7.21.2.1.1.2.1.9

vlanCurCfgPrVlanType

The type of the Private VLAN.

Enumeration

Enumerated Values:

0	none
1	primary
2	isolated
3	community

.1.3.6.1.4.1.20301.2.7.21.2.1.1.2.1.10

vlanCurCfgPrVlanMapPriId

The primary vlan id

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.1.1.2.1.11

vlanCurCfgVports

Current list of vPorts in VLAN

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.1.1.2.1.22

vlanNewCfgTable

table

.1.3.6.1.4.1.20301.2.7.21.2.1.1.3 · 1 row entry · 14 columns

Open in standard view

The table of VLAN configuration.

vlanNewCfgTableEntry entry .1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1

A row in the VLAN configuration table.

Indexes

vlanNewCfgVlanId

Column Syntax OID

vlanNewCfgVlanId

The VLAN identifier.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.1

vlanNewCfgVlanName

The VLAN name.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.2

vlanNewCfgPorts

The port list in the VLAN. The ports are presented in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ po…

OctetString

.1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.3

vlanNewCfgState

Enable or disable a VLAN

Enumerationr/w

Enumerated Values:

2	enabled
3	disabled

.1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.4

vlanNewCfgAddPortIndex

The port to be added to the specified VLAN. A '0' value is
returned when read.

PortNumberr/w

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.5

vlanNewCfgRemovePortIndex

The port to be removed from the specified VLAN. A '0'
value is returned when read.

PortNumberr/w

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.6

vlanNewCfgDelete

This is an action object to create or delete a VLAN.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete a VLAN

Enumerationr/w

Enumerated Values:

1	other
2	delete

.1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.7

vlanNewCfgPrVlanType

The type of the Private VLAN.

Enumerationr/w

Enumerated Values:

0	none
1	primary
2	isolated
3	community

.1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.13

vlanNewCfgPrVlanMapPriId

The primary vlan id. To delete set 0.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.14

vlanNewCfgVports

List of vPorts in VLAN

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.25

vlanNewCfgAddVport

Add vPort in VLAN

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.26

vlanNewCfgRemoveVport

Remove vPort from VLAN

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.27

vlanNewCfgAddPortAlias

The port alias to be added to the specified VLAN. A '0' value is
returned when read.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.28

vlanNewCfgRemovePortAlias

The port alias to be removed from the specified VLAN. A '0'
value is returned when read.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.29

trunkGroupCurCfgTable

table

.1.3.6.1.4.1.20301.2.7.21.2.1.2.2 · 1 row entry · 3 columns

Open in standard view

The table of trunk group configuration.

trunkGroupCurCfgTableEntry entry .1.3.6.1.4.1.20301.2.7.21.2.1.2.2.1

A row in the trunk group configuration table.

Indexes

trunkGroupCurCfgIndex

Column Syntax OID

trunkGroupCurCfgIndex

The identifier of the trunk group.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.1.2.2.1.1

trunkGroupCurCfgPorts

The port list in the trunk group. The ports are presented in
bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||…

OctetString

.1.3.6.1.4.1.20301.2.7.21.2.1.2.2.1.2

trunkGroupCurCfgState

Enable or disable a trunk group.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.20301.2.7.21.2.1.2.2.1.3

trunkGroupNewCfgTable

table

.1.3.6.1.4.1.20301.2.7.21.2.1.2.3 · 1 row entry · 8 columns

Open in standard view

The table of trunk group configuration.

trunkGroupNewCfgTableEntry entry .1.3.6.1.4.1.20301.2.7.21.2.1.2.3.1

A row in the trunk group configuration table.

Indexes

trunkGroupNewCfgIndex

Column Syntax OID

trunkGroupNewCfgIndex

The identifier of the trunk group.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.1.2.3.1.1

trunkGroupNewCfgPorts

The port list in the trunk group. The ports are presented
in bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||…

OctetString

.1.3.6.1.4.1.20301.2.7.21.2.1.2.3.1.2

trunkGroupNewCfgAddPortIndex

The port to be added in the trunk group. When read, 0 is returned.

PortNumberr/w

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.2.1.2.3.1.3

trunkGroupNewCfgRemovePortIndex

The port to be deleted from the trunk group. when read, 0
is returned.

PortNumberr/w

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.2.1.2.3.1.4

trunkGroupNewCfgState

Enable or disable a trunk group.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.20301.2.7.21.2.1.2.3.1.5

trunkGroupNewCfgDelete

Setting the value to delete(2) will delete the entire
row. When read, other(1) is returned.

Enumerationr/w

Enumerated Values:

1	other
2	delete

.1.3.6.1.4.1.20301.2.7.21.2.1.2.3.1.6

trunkGroupNewCfgAddPortAlias

The port alias to be added in the trunk group. When read, 0 is returned.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.1.2.3.1.7

trunkGroupNewCfgRemovePortAlias

The port alias to be deleted from the trunk group. when read, 0
is returned.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.1.2.3.1.8

trunkLacpGroupCurCfgTable

table

.1.3.6.1.4.1.20301.2.7.21.2.1.2.5 · 1 row entry · 2 columns

Open in standard view

The table of LACP trunk group configuration.

trunkLacpGroupCurCfgTableEntry entry .1.3.6.1.4.1.20301.2.7.21.2.1.2.5.1

A row in the LACP trunk group configuration table.

Indexes

trunkLacpGroupCurCfgIndex

Column	Syntax	OID
trunkLacpGroupCurCfgIndex The identifier of the LACP trunk group.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.2.1.2.5.1.1`
trunkLacpGroupCurCfgAdminKey The administrative key of the LACP trunk group. Ports whose LACP key is same will be member ports of the trunk.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.2.1.2.5.1.2`

trunkLacpGroupNewCfgTable

table

.1.3.6.1.4.1.20301.2.7.21.2.1.2.6 · 1 row entry · 2 columns

Open in standard view

The table of LACP trunk group configuration.

trunkLacpGroupNewCfgTableEntry entry .1.3.6.1.4.1.20301.2.7.21.2.1.2.6.1

A row in the LACP trunk group configuration table.

Indexes

trunkLacpGroupNewCfgIndex

Column	Syntax	OID
trunkLacpGroupNewCfgIndex The identifier of the LACP trunk group.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.2.1.2.6.1.1`
trunkLacpGroupNewCfgAdminKey The administrative key of the LACP trunk group. Ports whose LACP key is same will be member ports of the trunk. Value 0 means LACP trunk group deletion.	Integer32r/w Constraints: `range: 0-65535`	`.1.3.6.1.4.1.20301.2.7.21.2.1.2.6.1.2`

pmCurCfgPortMonitorTable

table

.1.3.6.1.4.1.20301.2.7.21.2.1.4.1.3 · 1 row entry · 5 columns

Open in standard view

The table of monitoring ports.

pmCurCfgPortMonitorEntry entry .1.3.6.1.4.1.20301.2.7.21.2.1.4.1.3.1

A row in the monitoring port table.

Indexes

pmCurCfgPmirrMoniPortIndex pmCurCfgPmirrMirrPortIndex

Column Syntax OID

pmCurCfgPmirrMoniPortIndex

The monitoring port number.

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.2.1.4.1.3.1.1

pmCurCfgPmirrMirrPortIndex

The mirrored port number

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.2.1.4.1.3.1.2

pmCurCfgPmirrDirection

The type of traffic to be monitored with respect to the
mirrored port.

Enumeration

Enumerated Values:

1	in
2	out
3	both

.1.3.6.1.4.1.20301.2.7.21.2.1.4.1.3.1.3

pmCurCfgPmirrMoniPortAlias

The monitoring port alias.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.1.4.1.3.1.7

pmCurCfgPmirrMirrPortAlias

The mirrored port alias.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.1.4.1.3.1.8

pmNewCfgPortMonitorTable

table

.1.3.6.1.4.1.20301.2.7.21.2.1.4.1.4 · 1 row entry · 7 columns

Open in standard view

The table of monitoring ports.

pmNewCfgPortMonitorEntry entry .1.3.6.1.4.1.20301.2.7.21.2.1.4.1.4.1

A row in the monitoring port table.

Indexes

pmNewCfgPmirrMoniPortIndex pmNewCfgPmirrMirrPortIndex

Column Syntax OID

pmNewCfgPmirrMoniPortIndex

The monitoring port number.

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.2.1.4.1.4.1.1

pmNewCfgPmirrMirrPortIndex

The mirrored port number

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.2.1.4.1.4.1.2

pmNewCfgPmirrDirection

The type of traffic to be monitored with respect to the
mirrored port.

Enumerationr/w

Enumerated Values:

1	in
2	out
3	both

.1.3.6.1.4.1.20301.2.7.21.2.1.4.1.4.1.3

pmNewCfgPmirrDelete

Setting the value to delete(2) will delete the entire
row. When read, other(1) is returned.

Enumerationr/w

Enumerated Values:

1	other
2	delete

.1.3.6.1.4.1.20301.2.7.21.2.1.4.1.4.1.4

pmNewCfgPmonDelete

Setting the value to delete(2) will delete the monitor
port. When read, other(1) is returned.

Enumerationr/w

Enumerated Values:

1	other
2	delete

.1.3.6.1.4.1.20301.2.7.21.2.1.4.1.4.1.10

pmNewCfgPmirrMoniPortAlias

The monitoring port alias.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.1.4.1.4.1.11

pmNewCfgPmirrMirrPortAlias

The mirrored port alias.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.1.4.1.4.1.12

lacpCurPortCfgTable

table

.1.3.6.1.4.1.20301.2.7.21.2.1.5.7 · 1 row entry · 7 columns

Open in standard view

The table of LACP port configuration.

lacpCurPortCfgTableEntry entry .1.3.6.1.4.1.20301.2.7.21.2.1.5.7.1

A row in the LACP port configuration table.

Indexes

lacpCurPortCfgTableId

Column Syntax OID

lacpCurPortCfgTableId

LACP port number.

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.2.1.5.7.1.1

lacpCurPortState

LACP port state can be one of three states
off (Not participating in LACP)
Active (Initiates LACPDU updates)
Passive (Does not initiate LACPDU updates but responds to peer.

Enumeration

Enumerated Values:

1	off
2	active
3	passive

.1.3.6.1.4.1.20301.2.7.21.2.1.5.7.1.2

lacpCurPortActorPortPriority

The priority value assigned to this Aggregation Port.
This 16-bit value is read-only.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.20301.2.7.21.2.1.5.7.1.3

lacpCurPortActorAdminKey

The current administrative value of the Key for the
Aggregation Port. This is a 16-bit read-only value.
The meaning of particular Key values is of local
significance.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.20301.2.7.21.2.1.5.7.1.4

lacpCurPortActorMinLinks

The current minimum links for the Aggregation Port.
This is a 16-bit read-only value. The meaning of
particular Key values is of local significance.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.1.5.7.1.5

lacpCurPortSuspendIndividual

It indicates if the port can be treated as an individual
link when it does not get LACPDU from the peer port.
suspend (can't be treated as a normal link)
individual (can be treated as a normal link)

Enumeration

Enumerated Values:

1	suspend
2	individual

.1.3.6.1.4.1.20301.2.7.21.2.1.5.7.1.6

lacpCurPortAlias

LACP port alias.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.1.5.7.1.7

lacpNewPortCfgTable

table

.1.3.6.1.4.1.20301.2.7.21.2.1.5.8 · 1 row entry · 8 columns

Open in standard view

The table of LACP port configuration.

lacpNewPortCfgTableEntry entry .1.3.6.1.4.1.20301.2.7.21.2.1.5.8.1

A row in the LACP port configuration table.

Indexes

lacpNewPortCfgTableId

Column Syntax OID

lacpNewPortCfgTableId

LACP port number.

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.2.1.5.8.1.1

lacpNewPortState

LACP port state can be one of three states
off (Not participating in LACP)
Active (Initiates LACPDU updates)
Passive (Does not initiate LACPDU updates but responds to peer.

Enumerationr/w

Enumerated Values:

1	off
2	active
3	passive

.1.3.6.1.4.1.20301.2.7.21.2.1.5.8.1.2

lacpNewPortActorPortPriority

The priority value assigned to this Aggregation Port.
This 16-bit value is read-write.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.20301.2.7.21.2.1.5.8.1.3

lacpNewPortActorAdminKey

The current administrative value of the Key for the
Aggregation Port. This is a 16-bit read-write value.
The meaning of particular Key values is of local
significance.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.20301.2.7.21.2.1.5.8.1.4

lacpNewPortActorMinLinks

The current minimum links for the Aggregation Port.
This is a 16-bit read-write value. The meaning of
particular Key values is of local significance.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.1.5.8.1.5

lacpNewPortSetToDefault

When read, always returns none(1).
When setting setDefault(2) value, the LACP port settings
are set to the default values.

Enumerationr/w

Enumerated Values:

1	none
2	setDefault

.1.3.6.1.4.1.20301.2.7.21.2.1.5.8.1.6

lacpNewPortSuspendIndividual

It indicates if the port can be treated as an individual
link when it does not get LACPDU from the peer port.
suspend (can't be treated as a normal link)
individual (can be treated as a normal link)

Enumerationr/w

Enumerated Values:

1	suspend
2	individual

.1.3.6.1.4.1.20301.2.7.21.2.1.5.8.1.7

lacpNewPortAlias

LACP port alias.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.1.5.8.1.8

failoverCurCfgTriggerTable

table

.1.3.6.1.4.1.20301.2.7.21.2.1.10.6 · 1 row entry · 11 columns

Open in standard view

The Failover Trigger Table.

failoverCurCfgTriggerTableEntry entry .1.3.6.1.4.1.20301.2.7.21.2.1.10.6.1

A row in the Failover Trigger Table.

Indexes

failoverCurCfgTriggerId

Column Syntax OID

failoverCurCfgTriggerId

The Trigger identifier.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.1.10.6.1.1

failoverCurCfgTriggerState

Enable or disable Trigger state

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.1.10.6.1.2

failoverCurCfgTriggerLimit

Limit # of operational links

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.1.10.6.1.3

failoverCurCfgTriggerMmonPort

The Manual Monitor port list. The ports are presented in bitmap format:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .…

OctetString

.1.3.6.1.4.1.20301.2.7.21.2.1.10.6.1.6

failoverCurCfgTriggerMmonTrunk

The Manual Monitor trunk list. The trunks are presented in bitmap format:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . …

OctetString

.1.3.6.1.4.1.20301.2.7.21.2.1.10.6.1.7

failoverCurCfgTriggerMmonKey

The LACP admin key. This is an array of 16-bit read-only values.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.1.10.6.1.8

failoverCurCfgTriggerMconPort

The Manual Control port list. The ports are presented in bitmap format:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .…

OctetString

.1.3.6.1.4.1.20301.2.7.21.2.1.10.6.1.9

failoverCurCfgTriggerMconVport

The Manual Control vPort list

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.1.10.6.1.10

failoverCurCfgTriggerMconTrunk

The Manual Control trunk list. The trunks are presented in bitmap format:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . …

OctetString

.1.3.6.1.4.1.20301.2.7.21.2.1.10.6.1.11

failoverCurCfgTriggerMconKey

The LACP admin key. This is an array of 16-bit read-only values.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.1.10.6.1.12

failoverCurCfgFabricPathMonitor

Enable or disable Failover Fabric Path monitoring

Enumeration

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.20301.2.7.21.2.1.10.6.1.13

failoverNewCfgTriggerTable

table

.1.3.6.1.4.1.20301.2.7.21.2.1.10.7 · 1 row entry · 30 columns

Open in standard view

The Failover Trigger Table.

failoverNewCfgTriggerTableEntry entry .1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1

A row in the Failover Trigger Table.

Indexes

failoverNewCfgTriggerId

Column Syntax OID

failoverNewCfgTriggerId

The Trigger identifier.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.1

failoverNewCfgTriggerState

Enable or disable Trigger state

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.2

failoverNewCfgTriggerLimit

Limit # of operational links

Integer32r/w

Constraints:
range: 0-1024

.1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.3

failoverNewCfgTriggerMmonPort

The Manual Monitor port list. The ports are presented in bitmap format:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .…

OctetString

.1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.10

failoverNewCfgTriggerMmonPortIndexAdd

Add port to Manual Monitor. When read, 0 is returned.

PortNumberr/w

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.11

failoverNewCfgTriggerMmonPortIndexRem

Remove port from Manual Monitor. When read, 0 is returned.

PortNumberr/w

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.12

failoverNewCfgTriggerMmonTrunk

The Manual Monitor trunk list. The trunks are presented in bitmap format:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . …

OctetString

.1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.13

failoverNewCfgTriggerMmonTrunkAdd

Add trunk to Manual Monitor. When read, 0 is returned.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.14

failoverNewCfgTriggerMmonTrunkRem

Remove trunk from Manual Monitor. When read, 0 is returned.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.15

failoverNewCfgTriggerMmonKey

The LACP admin key. This is an array of 16-bit read-only values.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.16

failoverNewCfgTriggerMmonKeyAdd

Add LACP admin key to Manual Monitor. When read, 0 is returned.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.17

failoverNewCfgTriggerMmonKeyRem

Remove LACP admin key from Manual Monitor. When read, 0 is returned.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.18

failoverNewCfgTriggerMconPort

The Manual Control port list. The ports are presented in bitmap format:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .…

OctetString

.1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.19

failoverNewCfgTriggerMconPortIndexAdd

Add port to Manual Control. When read, 0 is returned.

PortNumberr/w

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.20

failoverNewCfgTriggerMconPortIndexRem

Remove port from Manual Control. When read, 0 is returned.

PortNumberr/w

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.21

failoverNewCfgTriggerMconVport

The Manual Control vPort list

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.22

failoverNewCfgTriggerMconVportAdd

Add vPort to Manual Control.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.23

failoverNewCfgTriggerMconVportRem

Remove vPort from Manual Control.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.24

failoverNewCfgTriggerMconTrunk

The Manual Control trunk list. The trunks are presented in bitmap format:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . …

OctetString

.1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.25

failoverNewCfgTriggerMconTrunkAdd

Add trunk to Manual Control. When read, 0 is returned.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.26

failoverNewCfgTriggerMconTrunkRem

Remove trunk from Manual Control. When read, 0 is returned.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.27

failoverNewCfgTriggerMconKey

The LACP admin key. This is an array of 16-bit read-only values.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.28

failoverNewCfgTriggerMconKeyAdd

Add LACP admin key to Manual Control. When read, 0 is returned.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.29

failoverNewCfgTriggerMconKeyRem

Remove LACP admin key from Manual Control. When read, 0 is returned.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.30

failoverNewCfgTriggerDelete

Setting the value to delete(2) will delete the entire
row. When read, other(1) is returned.

Enumerationr/w

Enumerated Values:

1	other
2	delete

.1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.31

failoverNewCfgFabricPathMonitor

Enable or disable Failover Fabric Path monitoring

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.32

failoverNewCfgTriggerMmonPortAliasAdd

Add port to Manual Monitor using its alias. When read, 0 is returned.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.33

failoverNewCfgTriggerMmonPortAliasRem

Remove port from Manual Monitor using its alias. When read, 0 is returned.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.34

failoverNewCfgTriggerMconPortAliasAdd

Add port to Manual Control using its alias. When read, 0 is returned.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.35

failoverNewCfgTriggerMconPortAliasRem

Remove port from Manual Control using its alias. When read, 0 is returned.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.36

hotlinksCurCfgTriggerTable

table

.1.3.6.1.4.1.20301.2.7.21.2.1.14.6 · 1 row entry · 16 columns

Open in standard view

The Hot Links Trigger Table.

hotlinksCurCfgTriggerTableEntry entry .1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1

A row in the Hot Links Trigger Table.

Indexes

hotlinksCurCfgTriggerId

Column Syntax OID

hotlinksCurCfgTriggerId

The Trigger identifier.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.1

hotlinksCurCfgTriggerName

A textual string containing the trigger name.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.2

hotlinksCurCfgTriggerState

Enable/disable Trigger state.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.3

hotlinksCurCfgTriggerPreemptState

Enable/disable Preemption state.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.4

hotlinksCurCfgTriggerFdelay

Forward Delay setting (in secs).

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.5

hotlinksCurCfgTriggerMasterPortIndex

The master interface port number.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.6

hotlinksCurCfgTriggerMasterTrunk

The master interface trunk number.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.7

hotlinksCurCfgTriggerBackupPortIndex

The backup interface port number.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.8

hotlinksCurCfgTriggerBackupTrunk

The backup interface trunk number.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.9

hotlinksCurCfgTriggerDelete

Delete a Hot Links trigger configuration.

Enumeration

Enumerated Values:

1	other
2	delete

.1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.10

hotlinksCurCfgTriggerMasterAdminkey

The master interface admin key number.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.11

hotlinksCurCfgTriggerBackupAdminkey

The backup interface admin key number.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.12

hotlinksCurCfgTriggerMode

The current mode of the Hot Links trigger entry:
portMode - either the master or the backup interface will be active
and forwarding traffic while the other interface will be
standby and not forward…

Enumeration

Enumerated Values:

1	portMode
2	autoVlanMode
3	preferVlanMode

.1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.13

hotlinksCurCfgTriggerBackupPreferVLANs

Trigger backup preferred VLANs. The value of this object identifies
one or more VLANs whose traffic will be carried by the backup
interface when the associated hotlinksCurCfgTriggerMode object value
is preferVlanMode.…

OctetString

.1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.14

hotlinksCurCfgTriggerMasterPortAlias

The master interface port alias.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.17

hotlinksCurCfgTriggerBackupPortAlias

The backup interface port alias.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.18

hotlinksNewCfgTriggerTable

table

.1.3.6.1.4.1.20301.2.7.21.2.1.14.7 · 1 row entry · 18 columns

Open in standard view

The Hot Links Trigger Table.

hotlinksNewCfgTriggerTableEntry entry .1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1

A row in the Hot Links Trigger Table.

Indexes

hotlinksNewCfgTriggerId

Column Syntax OID

hotlinksNewCfgTriggerId

The Trigger identifier.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.1

hotlinksNewCfgTriggerName

A textual string containing the trigger name.

OctetStringr/w

Constraints:
range: 0-33

.1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.2

hotlinksNewCfgTriggerState

Enable/disable Trigger state.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.3

hotlinksNewCfgTriggerPreemptState

Enable/disable Preemption state.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.4

hotlinksNewCfgTriggerFdelay

Forward Delay setting (in secs).

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.5

hotlinksNewCfgTriggerMasterPortIndex

The master interface port number.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.6

hotlinksNewCfgTriggerMasterTrunk

The master interface trunk number.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.7

hotlinksNewCfgTriggerBackupPortIndex

The backup interface port number.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.8

hotlinksNewCfgTriggerBackupTrunk

The backup interface trunk number.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.9

hotlinksNewCfgTriggerDelete

Delete a Hot Links trigger configuration.

Enumerationr/w

Enumerated Values:

1	other
2	delete

.1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.10

hotlinksNewCfgTriggerMasterAdminkey

The master interface admin key number.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.11

hotlinksNewCfgTriggerBackupAdminkey

The backup interface admin key number.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.12

hotlinksNewCfgTriggerMode

The new mode of the Hot Links trigger entry:
portMode - either the master or the backup interface will be active
and forwarding traffic while the other interface will be
standby and not forwarding …

Enumerationr/w

Enumerated Values:

1	portMode
2	autoVlanMode
3	preferVlanMode

.1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.13

hotlinksNewCfgTriggerBackupPreferVLANs

Trigger backup preferred VLANs. The value of this object identifies
one or more VLANs whose traffic will be carried by the backup
interface when the associated hotlinksNewCfgTriggerMode object value
is preferVlanMode.…

OctetStringr/w

.1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.14

hotlinksNewCfgTriggerBackupAddPreferVlan

Add a VLAN as the backup interface's preferred VLAN.
If read, it will always return value 0.

Integer32r/w

Constraints:
range: 1-4094

.1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.15

hotlinksNewCfgTriggerBackupRemovePreferVlan

Remove a VLAN from the backup interface's preferred VLANs.
If read, it will always return value 0.

Integer32r/w

Constraints:
range: 1-4094

.1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.16

hotlinksNewCfgTriggerMasterPortAlias

The master interface port alias.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.17

hotlinksNewCfgTriggerBackupPortAlias

The backup interface port alias.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.18

lldpCurCfgPortTable

table

.1.3.6.1.4.1.20301.2.7.21.2.1.15.2 · 1 row entry · 18 columns

Open in standard view

The table of LLDP port configuration in the current_configuration
block.

lldpCurCfgPortEntry entry .1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1

A row in the LLDP port configuration table in the
current_configuration block.

Indexes

lldpCurCfgPortIndx

Column Syntax OID

lldpCurCfgPortIndx

The index of the row in LLDP port configurations table.

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.1

lldpCurCfgPortAdmStat

This is the admin status of the LLDP port.

Enumeration

Enumerated Values:

1	enabledTxOnly
2	enabledRxOnly
3	enabledRxTx
4	disabled

.1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.2

lldpCurCfgPortSnmpTrap

This is the SNMP trap notification state of the LLDP port.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.3

lldpCurCfgPortportdesctlv

This is the Port Description TLV state of the LLDP port.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.4

lldpCurCfgPortsysnametlv

This is the System Name TLV state of the LLDP port.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.5

lldpCurCfgPortsysdescrtlv

This is the System Description TLV state of the LLDP port.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.6

lldpCurCfgPortsyscaptlv

This is the System Capabilities TLV state of the LLDP port.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.7

lldpCurCfgPortmgmtaddrtlv

This is the Management Address TLV state of the LLDP port.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.8

lldpCurCfgPortportvidtlv

This is the Port VLAN ID TLV state of the LLDP port.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.9

lldpCurCfgPortportprottlv

This is the Port and Protocol VLAN ID TLV state of the LLDP port.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.10

lldpCurCfgPortvlannametlv

This is the VLAN Name TLV state of the LLDP port.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.11

lldpCurCfgPortprotidtlv

This is the Protocol Identity TLV state of the LLDP port.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.12

lldpCurCfgPortmacphytlv

This is the MAC/PHY Configuration/Status TLV state of the LLDP port.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.13

lldpCurCfgPortpowermditlv

This is the Power Via MDI TLV state of the LLDP port.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.14

lldpCurCfgPortlinkaggrtlv

This is the Link Aggregation TLV state of the LLDP port.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.15

lldpCurCfgPortframesztlv

This is the Maximum Frame Size TLV state of the LLDP port.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.16

lldpCurCfgPortdcbxtlv

This is the DCBX TLV state of the LLDP port.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.17

lldpCurCfgPortAlias

The alias of the row in LLDP port configurations table.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.20

lldpNewCfgPortTable

table

.1.3.6.1.4.1.20301.2.7.21.2.1.15.3 · 1 row entry · 19 columns

Open in standard view

The table of LLDP port configuration in the new_configuration
block.

lldpNewCfgPortEntry entry .1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1

A row in the LLDP port configuration table in the
new_configuration block.

Indexes

lldpNewCfgPortIndx

Column Syntax OID

lldpNewCfgPortIndx

The index of the row in LLDP port configurations table.

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.1

lldpNewCfgPortAdmStat

This is the admin status of the LLDP port.

Enumerationr/w

Enumerated Values:

1	enabledTxOnly
2	enabledRxOnly
3	enabledRxTx
4	disabled

.1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.2

lldpNewCfgPortSnmpTrap

This is the SNMP trap notification state of the LLDP port

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.3

lldpNewCfgPortportdesctlv

This is the Port Description TLV state of the LLDP port.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.4

lldpNewCfgPortsysnametlv

This is the System Name TLV state of the LLDP port.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.5

lldpNewCfgPortsysdescrtlv

This is the System Description TLV state of the LLDP port.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.6

lldpNewCfgPortsyscaptlv

This is the System Capabilities TLV state of the LLDP port.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.7

lldpNewCfgPortmgmtaddrtlv

This is the Management Address TLV state of the LLDP port.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.8

lldpNewCfgPortportvidtlv

This is the Port VLAN ID TLV state of the LLDP port.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.9

lldpNewCfgPortportprottlv

This is the Port and Protocol VLAN ID TLV state of the LLDP port.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.10

lldpNewCfgPortvlannametlv

This is the VLAN Name TLV state of the LLDP port.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.11

lldpNewCfgPortprotidtlv

This is the Protocol Identity TLV state of the LLDP port.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.12

lldpNewCfgPortmacphytlv

This is the MAC/PHY Configuration/Status TLV state of the LLDP port.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.13

lldpNewCfgPortpowermditlv

This is the Power Via MDI TLV state of the LLDP port.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.14

lldpNewCfgPortlinkaggrtlv

This is the Link Aggregation TLV state of the LLDP port.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.15

lldpNewCfgPortframesztlv

This is the Maximum Frame Size TLV state of the LLDP port.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.16

lldpNewCfgPortalltlv

Set the corresponding state for all the LLDP port's TLVs.
other(3) is returned when the object is read.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
3	other

.1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.17

lldpNewCfgPortdcbxtlv

This is the DCBX TLV state of the LLDP port.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.18

lldpNewCfgPortAlias

The port of the row in LLDP port configurations table.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.20

lacpStatsTable

table

.1.3.6.1.4.1.20301.2.7.21.2.2.4.1 · 1 row entry · 11 columns

Open in standard view

The table of LACP Stats.

lacpStatsTableEntry entry .1.3.6.1.4.1.20301.2.7.21.2.2.4.1.1

Lacp status info.

Indexes

lacpStatsIndex

Column Syntax OID

lacpStatsIndex

Index

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.2.2.4.1.1.1

lacpdusRx

Valid LACPDUs received

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.2.4.1.1.2

markerpdusRx

Valid Marker PDUs received

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.2.4.1.1.3

markerresponsepdusRx

Valid Marker Rsp PDUs received

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.2.4.1.1.4

unknownRx

Unknown version/TLV type

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.2.4.1.1.5

illegalRx

Illegal subtype received

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.2.4.1.1.6

lacpdusTx

LACPDUs transmitted

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.2.4.1.1.7

markerpdusTx

Market PDUs transmitted

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.2.4.1.1.8

markerresponsepdusTx

Marker Rsp PDUs transmitted

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.2.4.1.1.9

lacpClearStats

Setting this to clear(2) results in clearing the LACP statistics.

Enumerationr/w

Enumerated Values:

1	ok
2	clear

.1.3.6.1.4.1.20301.2.7.21.2.2.4.1.1.10

lacpStatsPortAlias

Port Alias.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.2.4.1.1.11

hotlinksStatsTriggerTable

table

.1.3.6.1.4.1.20301.2.7.21.2.2.6.1 · 1 row entry · 6 columns

Open in standard view

The Hot Links Trigger Table Stats.

hotlinksStatsTriggerTableEntry entry .1.3.6.1.4.1.20301.2.7.21.2.2.6.1.1

A row in the Hot Links Trigger Table Stats.

Indexes

hotlinksStatsTriggerId

Column	Syntax	OID
hotlinksStatsTriggerId The Trigger identifier.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.2.2.6.1.1.1`
hotlinksStatsTriggerName A textual string containing the trigger name.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.2.2.6.1.1.2`
hotlinksStatsTriggerMasterActive The number of times the master interface was set to active.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.2.2.6.1.1.3`
hotlinksStatsTriggerBackupActive The number of times the backup interface was set to active.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.2.2.6.1.1.4`
hotlinksStatsTriggerFdbUpdate The number of times an FDB update was performed.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.2.2.6.1.1.5`
hotlinksStatsTriggerFdbFailed The number of times an FDB update failed.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.2.2.6.1.1.6`

lldpStatsTable

table

.1.3.6.1.4.1.20301.2.7.21.2.2.7.2 · 1 row entry · 9 columns

Open in standard view

The table of LLDP statistics.

lldpStatsTableEntry entry .1.3.6.1.4.1.20301.2.7.21.2.2.7.2.1

LLDP statistics info.

Indexes

lldpStatsIndex

Column Syntax OID

lldpStatsIndex

The index of the row in LLDP port statistics.

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.2.2.7.2.1.1

lldpStatsFramesOutTotal

The total number of LLDP frames transmitted in this port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.2.2.7.2.1.2

lldpStatsFramesInTotal

The total number of LLDP frames received in this port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.2.2.7.2.1.3

lldpStatsFramesInErrorsTotal

The total number of erroneous LLDP frames received in this port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.2.2.7.2.1.4

lldpStatsFramesDiscardedTotal

The total number of received LLDP frames discarded in this port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.2.2.7.2.1.5

lldpStatsTLVsUnrecognizedTotal

The total number of unrecognized TLVs in this port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.2.2.7.2.1.6

lldpStatsAgeoutsTotal

The total number of neighbor's information deleted in this port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.2.2.7.2.1.7

lldpStatsClear

Setting this to clear(2) results in clearing the LLDP statistics.

Enumerationr/w

Enumerated Values:

1	ok
2	clear

.1.3.6.1.4.1.20301.2.7.21.2.2.7.2.1.8

lldpStatsPortAlias

The alias of the row in LLDP port statistics.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.2.7.2.1.9

slpStatsTxCountersTable

table

.1.3.6.1.4.1.20301.2.7.21.2.2.12.1 · 1 row entry · 4 columns

Open in standard view

A table with all the SLP Send counters.

slpStatsTxCounterEntry entry .1.3.6.1.4.1.20301.2.7.21.2.2.12.1.1

The configuration objects for a SLP Send counter entry.

Indexes

slpTxCounterIndex

Column	Syntax	OID
slpTxCounterIndex The index of this counter.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.2.2.12.1.1.1`
slpTxCounterName The name of this counter.	OctetString Constraints: `range: 0-255`	`.1.3.6.1.4.1.20301.2.7.21.2.2.12.1.1.2`
slpTxCounterUnicast The unicast value of this counter.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.2.2.12.1.1.3`
slpTxCounterMulticast The multicast value of this counter.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.2.2.12.1.1.4`

slpStatsRxCountersTable

table

.1.3.6.1.4.1.20301.2.7.21.2.2.12.2 · 1 row entry · 4 columns

Open in standard view

A table with all the SLP Receive counters.

slpStatsRxCounterEntry entry .1.3.6.1.4.1.20301.2.7.21.2.2.12.2.1

The configuration objects for a SLP Receive counter entry.

Indexes

slpRxCounterIndex

Column	Syntax	OID
slpRxCounterIndex The index this counter.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.2.2.12.2.1.1`
slpRxCounterName The name of this counter.	OctetString Constraints: `range: 0-255`	`.1.3.6.1.4.1.20301.2.7.21.2.2.12.2.1.2`
slpRxCounterUnicast The unicast value of this counter.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.2.2.12.2.1.3`
slpRxCounterMulticast The multicast value of this counter.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.2.2.12.2.1.4`

fdbTable

table

.1.3.6.1.4.1.20301.2.7.21.2.3.1.2 · 1 row entry · 7 columns

Open in standard view

The table of FDB entries.

fdbEntry entry .1.3.6.1.4.1.20301.2.7.21.2.3.1.2.1

A row in the FDB table

Indexes

fdbMacAddr

Column Syntax OID

fdbMacAddr

The MAC address for the FDB entry.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.20301.2.7.21.2.3.1.2.1.1

fdbVlan

The VLAN ID for the FDB entry.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.1.2.1.2

fdbSrcPortIndex

Either the value '0', or the port number of the port on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the port
number has not bee…

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.2.3.1.2.1.3

fdbState

The state of the FDB entry. The meanings of the values are :
unknown(1) : the MAC address has not yet been learned by the switch
but has only been seen as a destination address
forward(2) : the MAC address …

Enumeration

Enumerated Values:

1	unknown
2	forward
3	trunk

.1.3.6.1.4.1.20301.2.7.21.2.3.1.2.1.4

fdbSrcTrunk

Either the value '0', or the trunk number of the trunk on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the source
address is not as…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.1.2.1.7

fdbStatus

'1' if it is permanent
'0' if it is not permanent

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.1.2.1.8

fdbSrcPortAlias

Either the value '0', or the port alias of the port on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the port
number has not been le…

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.3.1.2.1.9

lacpInfoAggrTable

table

.1.3.6.1.4.1.20301.2.7.21.2.3.3.1 · 1 row entry · 14 columns

Open in standard view

The table of LACP aggregator information.

lacpInfoAggrTableEntry entry .1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1

Information about a LACP aggregator.

Indexes

lacpInfoAggrIndex

Column Syntax OID

lacpInfoAggrIndex

The aggregator identifier.

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.1

lacpInfoAggrId

LACP aggregator ID

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.2

lacpInfoAggrMac

LACP aggregator MAC address

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.3

lacpInfoAggrActSysPrio

LACP aggregator actor system priority

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.4

lacpInfoAggrActSysId

LACP aggregator actor system ID

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.5

lacpInfoAggrIndivState

LACP aggregator individual state

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.6

lacpInfoAggrActAdminKey

LACP aggregator actor admin key

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.7

lacpInfoAggrActOperKey

LACP aggregator actor oper key

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.8

lacpInfoAggrPartSysPrio

LACP aggregator partner system priority

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.9

lacpInfoAggrPartSysId

LACP aggregator partner system ID

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.10

lacpInfoAggrPartOperKey

LACP aggregator partner oper key

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.11

lacpInfoAggrReadyState

LACP aggregator ready state

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.12

lacpInfoAggrNumPorts

Number of ports in aggregator

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.13

lacpInfoAggrMinLinks

Min Links of ports in aggregator

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.15

lacpInfoPortGeneralTable

table

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1 · 1 row entry · 25 columns

Open in standard view

The table of LACP port general information.

lacpInfoPortGeneralTableEntry entry .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1

General information about a LACP port.

Indexes

lacpInfoPortGeneralIndex

Column Syntax OID

lacpInfoPortGeneralIndex

The port identifier.

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.1

lacpInfoPortLacpEna

LACP enabled on port

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.2

lacpInfoPortAdminEna

LACP port admin enabled

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.3

lacpInfoPortActSysId

LACP port actor system ID

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.4

lacpInfoPortActSysPrio

LACP port actor system priority

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.5

lacpInfoPortActAdminKey

LACP port actor admin key

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.6

lacpInfoPortActOperKey

LACP port actor oper key

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.7

lacpInfoPortActPortNum

LACP port number

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.8

lacpInfoPortActPortPrio

LACP port priority

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.9

lacpInfoPortIndivState

LACP port individual state

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.10

lacpInfoSelAggrId

LACP port selected aggregator ID

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.11

lacpInfoAttAggrId

LACP port attached aggregator ID

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.12

lacpInfoPortReadyN

True value for Ready_N flag indicates that the wait while timer
has expired and it is waiting to attach to an aggregator.
There is one Ready_N value for each port.

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.13

lacpInfoPortNtt

Need to transmit flag. True indicates that there is new protocol
information that should be transmitted on the link.

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.14

lacpInfoPortSelected

Selected flag value indicates that the selection logic has selected
an appropriate Aggregator. A value of unselected indicates that no
aggregator is currently selected. A value of standby indicates that
although the se…

Enumeration

Enumerated Values:

1	selected
2	unselected
3	standby
4	suspended
5	individual

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.15

lacpInfoPortMoved

Port Moved flag is set to true if the receive machine for a port
is in the port_disabled state, and the combination of partner oper
system and partner oper port number in use by the port has been
used by received in a…

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.16

lacpInfoCollDetState

LACP port collision and detection state

Enumeration

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.17

lacpInfoPortRxState

LACP port RX machine state

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.18

lacpInfoPortMuxState

LACP port Mux machine state

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.19

lacpInfoPortPerState

LACP port periodic machine state

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.20

lacpInfoPortPerTraTimer

Periodic Transmit Timer

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.21

lacpInfoPortCurWhileTimer

Current While Timer

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.22

lacpInfoPortOperState

The current operational state of LACP on the port.

Enumeration

Enumerated Values:

1	disabled
2	up
3	down

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.23

lacpInfoPortGeneralPortAlias

The port alias.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.24

lacpInfoPortActPortAlias

LACP port alias.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.25

lacpInfoPortAdminTable

table

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.2 · 1 row entry · 11 columns

Open in standard view

The table of LACP port admin information.

lacpInfoPortAdminTableEntry entry .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.2.1

Admin information about a LACP port.

Indexes

lacpInfoPortAdminIndex

Column Syntax OID

lacpInfoPortAdminIndex

The port identifier.

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.2.1.1

lacpInfoPortActAdPortState

The state of Actor Administrator Port. This is a octet mask
with the following bits: Activity, Synchronization, Defaulted,
Timeout, Collecting, Expired, Aggregation and Distributing.
If all of them are 0 then the state…

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.2.1.7

lacpInfoPortActAdActiv

The state of Actor Administrator Port Activity

Enumeration

Enumerated Values:

1	active
2	passive

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.2.1.8

lacpInfoPortActAdSync

The state of Actor Administrator Port Synchronization

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.2.1.9

lacpInfoPortActAdDef

The state of Actor Administrator Port Defaulted

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.2.1.10

lacpInfoPortActAdTimeout

The state of Actor Administrator Port Timeout

Enumeration

Enumerated Values:

1	short
2	long

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.2.1.11

lacpInfoPortActAdColl

The state of Actor Administrator Port Collecting

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.2.1.12

lacpInfoPortActAdExp

The state of Actor Administrator Port Expired

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.2.1.13

lacpInfoPortActAdAggr

The state of Actor Administrator Port Aggregation

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.2.1.14

lacpInfoPortActAdDist

The state of Actor Administrator Port Distributing

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.2.1.15

lacpInfoPortAdminPortAlias

The port alias.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.2.1.25

lacpInfoPortOperTable

table

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3 · 1 row entry · 25 columns

Open in standard view

The table of LACP port oper information.

lacpInfoPortOperTableEntry entry .1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1

Oper information about a LACP port.

Indexes

lacpInfoPortOperIndex

Column Syntax OID

lacpInfoPortOperIndex

The port identifier.

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.1

lacpInfoPortPartOpSysPrio

The value of Partner Operator Port System Priority

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.2

lacpInfoPortPartOpSysId

The value of Partner Operator Port System ID

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.3

lacpInfoPortPartOpKey

The value of Partner Operator Port Key

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.4

lacpInfoPortPartOpPortNum

The Partner Operator Port Number

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.5

lacpInfoPortPartOpPortPrio

The value of Partner Operator Port Priority

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.6

lacpInfoPortActOpPortState

The state of Actor Operator Port. This is a octet mask
with the following bits: Activity, Synchronization, Defaulted,
Timeout, Collecting, Expired, Aggregation and Distributing.
If all of them are 0 then the state is s…

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.7

lacpInfoPortActOpActiv

The state of Actor Operator Port Activity

Enumeration

Enumerated Values:

1	active
2	passive

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.8

lacpInfoPortActOpSync

The state of Actor Operator Port Synchronization

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.9

lacpInfoPortActOpDef

The state of Actor Operator Port Defaulted

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.10

lacpInfoPortActOpTimeout

The state of Actor Operator Port Timeout

Enumeration

Enumerated Values:

1	short
2	long

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.11

lacpInfoPortActOpColl

The state of Actor Operator Port Collecting

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.12

lacpInfoPortActOpExp

The state of Actor Operator Port Expired

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.13

lacpInfoPortActOpAggr

The state of Actor Operator Port Aggregation

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.14

lacpInfoPortActOpDist

The state of Actor Operator Port Distributing

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.15

lacpInfoPortPartOpPortState

The state of Partner Operator Port. This is a octet mask
with the following bits: Activity, Synchronization, Defaulted,
Timeout, Collecting, Expired, Aggregation and Distributing.
If all of them are 0 then the state is…

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.16

lacpInfoPortPartOpActiv

The state of Partner Operator Port Activity

Enumeration

Enumerated Values:

1	active
2	passive

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.17

lacpInfoPortPartOpSync

The state of Partner Operator Port Synchronization

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.18

lacpInfoPortPartOpDef

The state of Partner Operator Port Defaulted

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.19

lacpInfoPortPartOpTimeout

The state of Partner Operator Port Timeout

Enumeration

Enumerated Values:

1	short
2	long

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.20

lacpInfoPortPartOpColl

The state of Partner Operator Port Collecting

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.21

lacpInfoPortPartOpExp

The state of Partner Operator Port Expired

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.22

lacpInfoPortPartOpAggr

The state of Partner Operator Port Aggregation

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.23

lacpInfoPortPartOpDist

The state of Partner Operator Port Distributing

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.24

lacpInfoPortOperPortAlias

The port alias.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.25

vlanInfoTable

table

.1.3.6.1.4.1.20301.2.7.21.2.3.5.1 · 1 row entry · 4 columns

Open in standard view

The table of VLAN information.

vlanInfoTableEntry entry .1.3.6.1.4.1.20301.2.7.21.2.3.5.1.1

Information about a particular VLAN.

Indexes

vlanInfoId

Column Syntax OID

vlanInfoId

The VLAN identifier.

Integer32

Constraints:
range: 1-4090

.1.3.6.1.4.1.20301.2.7.21.2.3.5.1.1.1

vlanInfoName

The VLAN name.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.20301.2.7.21.2.3.5.1.1.2

vlanInfoStatus

Enable or disable, VLAN state information

Enumeration

Enumerated Values:

2	enabled
3	disabled

.1.3.6.1.4.1.20301.2.7.21.2.3.5.1.1.3

vlanInfoPorts

The port list information in the VLAN. The ports are presented
in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|…

OctetString

.1.3.6.1.4.1.20301.2.7.21.2.3.5.1.1.7

trunkGroupInfoTable

table

.1.3.6.1.4.1.20301.2.7.21.2.3.9.1 · 1 row entry · 4 columns

Open in standard view

The table of trunk group information.

trunkGroupInfoTableEntry entry .1.3.6.1.4.1.20301.2.7.21.2.3.9.1.1

A row in trunk group information table.

Indexes

trunkGroupInfoIndex

Column Syntax OID

trunkGroupInfoIndex

The identifier of the trunk group.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.9.1.1.1

trunkGroupInfoState

Trunk group state.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.3.9.1.1.2

trunkGroupInfoPorts

The port list in the trunk group. The ports are presented in
bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
…

OctetString

.1.3.6.1.4.1.20301.2.7.21.2.3.9.1.1.3

trunkGroupInfoProtocol

Trunk group protocol
Static - static trunk group
Lacp - dynamic trunk group

Enumeration

Enumerated Values:

1	static
2	lacp

.1.3.6.1.4.1.20301.2.7.21.2.3.9.1.1.4

trunkGroupInfoPortTable

table

.1.3.6.1.4.1.20301.2.7.21.2.3.9.2 · 1 row entry · 4 columns

Open in standard view

The table of Trunk Group Info.

trunkGroupInfoPortTableEntry entry .1.3.6.1.4.1.20301.2.7.21.2.3.9.2.1

A row in the Trunk Info table.

Indexes

trunkGroupInfoPortTrunkId trunkGroupInfoPortPortId

Column Syntax OID

trunkGroupInfoPortTrunkId

The Trunk identifier.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.9.2.1.1

trunkGroupInfoPortPortId

The Port identifier.

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.2.3.9.2.1.2

trunkGroupInfoPortStatus

The Port Status.

Enumeration

Enumerated Values:

0	down
2	up
3	detached

.1.3.6.1.4.1.20301.2.7.21.2.3.9.2.1.3

trunkGroupInfoPortAlias

The Port alaias.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.3.9.2.1.4

hotlinksInfoTriggerTable

table

.1.3.6.1.4.1.20301.2.7.21.2.3.10.3 · 1 row entry · 8 columns

Open in standard view

The Hot Links Trigger Table Info.

hotlinksInfoTriggerTableEntry entry .1.3.6.1.4.1.20301.2.7.21.2.3.10.3.1

A row in the Hot Links Trigger Table Info.

Indexes

hotlinksInfoTriggerId

Column Syntax OID

hotlinksInfoTriggerId

The Trigger identifier.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.10.3.1.1

hotlinksInfoTriggerName

A textual string containing the trigger name.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.3.10.3.1.2

hotlinksInfoTriggerState

Enable/disable Trigger state info.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.3.10.3.1.3

hotlinksInfoTriggerPreemptState

Enable/disable Preemption state info.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.3.10.3.1.4

hotlinksInfoTriggerFdelay

Forward Delay setting info (in secs).

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.10.3.1.5

hotlinksInfoTriggerActive

A textual string containing the active interface info.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.3.10.3.1.6

hotlinksInfoTriggerMasterActiveVlans

The active VLANs on the master interface.

in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 8
|| ||
|| ||___ vlan 7
|| |____ vlan 6
|…

OctetString

.1.3.6.1.4.1.20301.2.7.21.2.3.10.3.1.7

hotlinksInfoTriggerBackupActiveVlans

The active VLANs on the backup interface.

in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 8
|| ||
|| ||___ vlan 7
|| |____ vlan 6
|…

OctetString

.1.3.6.1.4.1.20301.2.7.21.2.3.10.3.1.8

lldpInfoPortTable

table

.1.3.6.1.4.1.20301.2.7.21.2.3.11.1 · 1 row entry · 21 columns

Open in standard view

The table of LLDP Port Info.

lldpInfoPortEntry entry .1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1

LLDP Port Info.

Indexes

lldpInfoPortIndex

Column Syntax OID

lldpInfoPortIndex

The index of the row in LLDP info port table.

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.1

lldpInfoPortAlias

The port alias of the port in LLDP info port table.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.2

lldpInfoPortMacAddress

The mac address of the port in LLDP info port table.

SNMPv2-TCPhysAddress

Textual Convention: SNMPv2-TCPhysAddress OctetString

.1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.3

lldpInfoPortMtu

The MTU size of the port in LLDP info port table.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.4

lldpInfoPortEnabled

The PortEnabled field of the port in LLDP info port table.

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.5

lldpInfoPortAdminStatus

The Admin Status of the port in LLDP info port table.

Enumeration

Enumerated Values:

1	enabledTxOnly
2	enabledRxOnly
3	enabledRxTx
4	disabled

.1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.6

lldpInfoPortRxChanges

The rxChanges field of the port in LLDP info port table.

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.7

lldpInfoPortportdesctlv

This is the Port Description TLV state of the LLDP port.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.8

lldpInfoPortsysnametlv

This is the System Name TLV state of the LLDP port.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.9

lldpInfoPortsysdescrtlv

This is the System Description TLV state of the LLDP port.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.10

lldpInfoPortsyscaptlv

This is the System Capabilities TLV state of the LLDP port.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.11

lldpInfoPortmgmtaddrtlv

This is the Management Address TLV state of the LLDP port.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.12

lldpInfoPortportvidtlv

This is the Port VLAN ID TLV state of the LLDP port.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.13

lldpInfoPortportprottlv

This is the Port and Protocol VLAN ID TLV state of the LLDP port.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.14

lldpInfoPortvlannametlv

This is the VLAN Name TLV state of the LLDP port.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.15

lldpInfoPortprotidtlv

This is the Protocol Identity TLV state of the LLDP port.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.16

lldpInfoPortmacphytlv

This is the MAC/PHY Configuration/Status TLV state of the LLDP port.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.17

lldpInfoPortpowermditlv

This is the Power Via MDI TLV state of the LLDP port.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.18

lldpInfoPortlinkaggrtlv

This is the Link Aggregation TLV state of the LLDP port.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.19

lldpInfoPortframesztlv

This is the Maximum Frame Size TLV state of the LLDP port.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.20

lldpInfoPortdcbxtlv

This is the DCBX TLV state of the LLDP port.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.21

lldpInfoTxTable

table

.1.3.6.1.4.1.20301.2.7.21.2.3.11.2 · 1 row entry · 13 columns

Open in standard view

The table of LLDP Transmit State Machine Info.

lldpInfoTxEntry entry .1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1

LLDP Transmit State Machine Info.

Indexes

lldpInfoTxIndex

Column Syntax OID

lldpInfoTxIndex

The index of the row in LLDP Transmit State Machine info table.

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1.1

lldpInfoTxState

The transmit state of the port in LLDP Transmit State Machine.

Enumeration

Enumerated Values:

1	txLldpInitialize
2	txIdle
3	txShutdownFrame
4	txInfoFrame

.1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1.2

lldpInfoTxLocalChanged

The somethingChangedLocal field of the port in LLDP Transmit
State Machine.

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1.3

lldpInfoTxTTL

The txTTL timer of the port in LLDP Transmit State Machine.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1.4

lldpInfoTxTxTTR

The txTTR timer of the port in LLDP Transmit State Machine.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1.5

lldpInfoTxDelayWhile

The txDelayWhile timer of the port in LLDP Transmit State
Machine.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1.6

lldpInfoTxShutdownWhile

The txShutdownWhile timer of the port in LLDP Transmit State
Machine.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1.7

lldpInfoTxReinitDelay

The reinitDelay timer of the port in LLDP Transmit State
Machine.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1.8

lldpInfoTxHoldMultiplier

The msgTxHold timer of the port in LLDP Transmit State
Machine.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1.9

lldpInfoTxTransmitInterval

The msgTxInterval timer of the port in LLDP Transmit State
Machine.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1.10

lldpInfoTxTransmitDelay

The txDelay timer of the port in LLDP Transmit State Machine.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1.11

lldpInfoTxDMAC

The Destination MAC address of the LLDP remote devices.
Legend(possible values in DMAC column) :
NB - Nearest Bridge - 01-80-C2-00-00-0E
NnTB - Nearest non-TPMR Bridge - 01-80-C2-00-00-03
NCB - Nearest Custo…

OctetString

Constraints:
range: 1-128

.1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1.12

lldpInfoTxPortAlias

The alias of the row in LLDP Transmit State Machine info table.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1.13

lldpInfoRxTable

table

.1.3.6.1.4.1.20301.2.7.21.2.3.11.3 · 1 row entry · 12 columns

Open in standard view

The table of LLDP Receive State Machine Info.

lldpInfoRxEntry entry .1.3.6.1.4.1.20301.2.7.21.2.3.11.3.1

LLDP Receive State Machine Info.

Indexes

lldpInfoRxIndex

Column Syntax OID

lldpInfoRxIndex

The index of the row in LLDP Receive State Machine info table.

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.2.3.11.3.1.1

lldpInfoRxState

The receive state of the port in LLDP Receive State Machine.

Enumeration

Enumerated Values:

1	lldpWaitPortOperational
2	deleteAgedInfo
3	rxLldpInitialize
4	rxWaitForFrame
5	rxFrame
6	deleteInfo
7	updateInfo

.1.3.6.1.4.1.20301.2.7.21.2.3.11.3.1.2

lldpInfoRxBadFrame

The badFrame field of the port in LLDP Receive State Machine.

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.20301.2.7.21.2.3.11.3.1.3

lldpInfoRxRcvFrame

The rcvFrame field of the port in LLDP Receive State Machine.

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.20301.2.7.21.2.3.11.3.1.4

lldpInfoRxRxInfoAge

The rxInfoAge field of the port in LLDP Receive State Machine.

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.20301.2.7.21.2.3.11.3.1.5

lldpInfoRxRemoteChanged

The somethingChangedRemote field of the port in LLDP Receive
State Machine.

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.20301.2.7.21.2.3.11.3.1.6

lldpInfoRxTooManyNeighbors

The tooManyNeighbors field of the port in LLDP Receive
State Machine.

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.20301.2.7.21.2.3.11.3.1.7

lldpInfoRxSNMPNotify

The tooManyNeighbors field of the port in LLDP Receive
State Machine.

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.20301.2.7.21.2.3.11.3.1.8

lldpInfoRxRxTTL

The rxTTL timer of the port in LLDP Receive State Machine.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.11.3.1.9

lldpInfoRxTooManyNeighborTimer

The tooManyNeighborsTimer timer of the port in LLDP Receive State
Machine.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.11.3.1.10

lldpInfoRxDMAC

OctetString

Constraints:
range: 1-128

.1.3.6.1.4.1.20301.2.7.21.2.3.11.3.1.11

lldpInfoRxPortAlias

The alias of the row in LLDP Receive State Machine info table.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.3.11.3.1.12

lldpInfoRemoteDevicesTable

table

.1.3.6.1.4.1.20301.2.7.21.2.3.11.4 · 1 row entry · 14 columns

Open in standard view

The table of LLDP remote devices Info.

lldpInfoRemoteDevicesEntry entry .1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1

LLDP remote devices Info.

Indexes

lldpInfoRemoteDevicesIndex

Column Syntax OID

lldpInfoRemoteDevicesIndex

The index of the row in LLDP remote devices info table.

Integer32

Constraints:
range: 1-256

.1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.1

lldpInfoRemoteDevicesRemoteTTL

The remote TTL of the LLDP remote devices entry.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.3

lldpInfoRemoteDevicesRxChanges

The rxChanges field of the LLDP remote devices entry.

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.4

lldpInfoRemoteDevicesLocalPort

The local port alias of the LLDP remote devices entry.

OctetString

Constraints:
range: 1-128

.1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.5

lldpInfoRemoteDevicesChassisSubtype

The chassis ID subtype of the LLDP remote devices entry.

Enumeration

Enumerated Values:

1	chassisComponent
2	interfaceAlias
3	portComponent
4	macAddress
5	networkAddress
6	interfaceName
7	locallyAssigned

.1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.6

lldpInfoRemoteDevicesChassisId

The chassis ID of the LLDP remote devices entry.

OctetString

Constraints:
range: 1-255

.1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.7

lldpInfoRemoteDevicesPortSubtype

The port ID subtype of the LLDP remote devices entry.

Enumeration

Enumerated Values:

1	interfaceAlias
2	portComponent
3	macAddress
4	networkAddress
5	interfaceName
6	agentCircuitId
7	locallyAssigned

.1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.8

lldpInfoRemoteDevicesPortId

The port ID of the LLDP remote devices entry.

OctetString

Constraints:
range: 1-255

.1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.9

lldpInfoRemoteDevicesSystemName

The system name of the LLDP remote devices entry.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.10

lldpInfoRemoteDevicesSystemDescription

The system description of the LLDP remote devices entry.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.11

lldpInfoRemoteDevicesPortDescription

The port description of the LLDP remote devices entry.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.12

lldpInfoRemoteDevicesSystemCapSupported

The supported system capabilities of the LLDP remote devices entry.

OctetString

Constraints:
range: 0-64

.1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.13

lldpInfoRemoteDevicesSystemCapEnabled

The enabled system capabilities of the LLDP remote devices entry.

OctetString

Constraints:
range: 0-64

.1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.14

lldpInfoRemoteDMAC

OctetString

Constraints:
range: 1-128

.1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.15

lldpInfoRemoteDevicesManAddrTable

table

.1.3.6.1.4.1.20301.2.7.21.2.3.11.5 · 1 row entry · 5 columns

Open in standard view

The table of LLDP remote devices management address Info.

lldpInfoRemoteDevicesManAddrEntry entry .1.3.6.1.4.1.20301.2.7.21.2.3.11.5.1

LLDP remote devices management address Info.

Indexes

lldpInfoRemoteDevicesIndex lldpInfoRemoteDevicesManAddrSubtype lldpInfoRemoteDevicesManAddr

Column Syntax OID

lldpInfoRemoteDevicesManAddrSubtype

The management address subtype of the LLDP remote devices entry.

Enumeration

Enumerated Values:

0	other
1	ipV4
2	ipV6
3	nsap
4	hdlc
5	bbn1822
6	all802
7	e163
8	e164
9	f69
10	x121
11	ipx
12	appletalk
13	decnetIV
14	banyanVines
15	e164withNsap
16	dns
17	distinguishedname
18	asnumber
19	xtpoveripv4
20	xtpoveripv6
21	xtpnativemodextp
65535	reserved

.1.3.6.1.4.1.20301.2.7.21.2.3.11.5.1.1

lldpInfoRemoteDevicesManAddr

The management address of the LLDP remote devices entry.

OctetString

Constraints:
range: 1-64

.1.3.6.1.4.1.20301.2.7.21.2.3.11.5.1.2

lldpInfoRemoteDevicesManAddrIfSubtype

The interface numbering subtype of the LLDP remote devices
management address entry.

Enumeration

Enumerated Values:

1	unknown
2	ifIndex
3	systemPortNumber

.1.3.6.1.4.1.20301.2.7.21.2.3.11.5.1.3

lldpInfoRemoteDevicesManAddrIfId

The interface number of the LLDP remote devices management address
entry.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.11.5.1.4

lldpInfoRemoteDevicesManAddrOID

The object identifier of the LLDP remote devices management address
entry.

OctetString

Constraints:
range: 0-128

.1.3.6.1.4.1.20301.2.7.21.2.3.11.5.1.5

failoverInfoTriggerTable

table

.1.3.6.1.4.1.20301.2.7.21.2.3.14.3 · 1 row entry · 9 columns

Open in standard view

This table holds the information for individual triggers

failoverInfoTriggerEntry entry .1.3.6.1.4.1.20301.2.7.21.2.3.14.3.1

A row in the failover trigger table.

Indexes

failoverInfoTriggerId

Column Syntax OID

failoverInfoTriggerId

The trigger identifier.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.14.3.1.1

failoverInfoTriggerState

The trigger state.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.2.3.14.3.1.2

failoverInfoTriggerLimit

Limit number of operational links

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.14.3.1.3

failoverInfoTriggerMonitorState

The runtime monitor state

Enumeration

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.20301.2.7.21.2.3.14.3.1.4

failoverInfoTriggerMonitorPorts

The list of ports that are monitored. The ports are
represented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| …

OctetString

.1.3.6.1.4.1.20301.2.7.21.2.3.14.3.1.5

failoverInfoTriggerControlState

The runtime control state

Enumeration

Enumerated Values:

1	auto-controlled
2	auto-disabled

.1.3.6.1.4.1.20301.2.7.21.2.3.14.3.1.6

failoverInfoTriggerControlPorts

The list of ports that are controlled. The ports are
represented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| …

OctetString

.1.3.6.1.4.1.20301.2.7.21.2.3.14.3.1.7

failoverInfoTriggerControlVports

The list of vPorts that are monitored

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.3.14.3.1.8

failoverInfoTriggerFabricPathMonitor

The Fabric Path monitoring State

Enumeration

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.20301.2.7.21.2.3.14.3.1.9

failoverInfoMonPortStateTable

table

.1.3.6.1.4.1.20301.2.7.21.2.3.14.4 · 1 row entry · 4 columns

Open in standard view

This table holds the information for individual triggers

failoverInfoTriggerMonPortEntry entry .1.3.6.1.4.1.20301.2.7.21.2.3.14.4.1

A row in the failover trigger table.

Indexes

failoverInfoTriggerMonId failoverInfoTriggerMonPortId

Column Syntax OID

failoverInfoTriggerMonId

The trigger identifier.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.14.4.1.1

failoverInfoTriggerMonPortId

The Port identifier.

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.2.3.14.4.1.2

failoverInfoTriggerMonPortStatus

The Port Status.

Enumeration

Enumerated Values:

0	failed
1	operational
2	detached

.1.3.6.1.4.1.20301.2.7.21.2.3.14.4.1.3

failoverInfoTriggerMonPortAlias

The Port alias.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.3.14.4.1.4

failoverInfoCtlPortStateTable

table

.1.3.6.1.4.1.20301.2.7.21.2.3.14.5 · 1 row entry · 4 columns

Open in standard view

This table holds the information for individual triggers

failoverInfoTriggerCtlPortEntry entry .1.3.6.1.4.1.20301.2.7.21.2.3.14.5.1

A row in the failover trigger table.

Indexes

failoverInfoTriggerCtlId failoverInfoTriggerCtlPortId

Column Syntax OID

failoverInfoTriggerCtlId

The trigger identifier.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.14.5.1.1

failoverInfoTriggerCtlPortId

The Port identifier.

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.2.3.14.5.1.2

failoverInfoTriggerCtlPortStatus

The Port Status.

Enumeration

Enumerated Values:

0	failed
1	operational
2	detached

.1.3.6.1.4.1.20301.2.7.21.2.3.14.5.1.3

failoverInfoTriggerCtlPortAlias

The Port alias.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.3.14.5.1.4

failoverInfoCtlVportStateTable

table

.1.3.6.1.4.1.20301.2.7.21.2.3.14.6 · 1 row entry · 5 columns

Open in standard view

This table holds the information for individual triggers

failoverInfoTriggerCtlVportEntry entry .1.3.6.1.4.1.20301.2.7.21.2.3.14.6.1

A row in the failover trigger table.

Indexes

failoverInfoCtlVportTriggerId failoverInfoCtlVportPortId failoverInfoCtlVportId

Column Syntax OID

failoverInfoCtlVportTriggerId

The trigger identifier of vPort.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.14.6.1.1

failoverInfoCtlVportPortId

The Port identifier of vPort.

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.2.3.14.6.1.2

failoverInfoCtlVportId

The Index identifier of vPort.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.14.6.1.3

failoverInfoCtlVportStatus

The vPort Status.

Enumeration

Enumerated Values:

0	failed
1	operational
2	detached

.1.3.6.1.4.1.20301.2.7.21.2.3.14.6.1.4

failoverInfoCtlVportPortAlias

The Port alias of vPort.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.3.14.6.1.5

ecpChnlInfoTable

table

.1.3.6.1.4.1.20301.2.7.21.2.3.17.1 · 1 row entry · 14 columns

Open in standard view

The table of ECP channel Info.

ecpChnlInfoEntry entry .1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1

Information about ECP channel.

Indexes

ecpChnlInfoEntryIndex

Column Syntax OID

ecpChnlInfoEntryIndex

The index of the ecp chnl info table.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.1

ecpChnlPortIndex

The ecp channel port info.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.2

ecpChnlStag

The ecp channel stag info.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.3

ecpChnlSndlen

The ecp channel send length info.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.4

ecpChnlSndnxt

The ecp channel send next info.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.5

ecpChnlRcvlast

The ecp channel recv last sequence info.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.6

ecpChnlStateMachine

The ecp channel state machineinfo.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.7

ecpChnlRxCnt

The ecp channel Rx count info.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.8

ecpChnlTxCnt

The ecp channel Tx count info.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.9

ecpChnlRxDrop

The ecp channel RxDrop info.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.10

ecpChnlTxDrop

The ecp channel TxDrop info.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.11

ecpChnlState

The ecp channel state info.

Enumeration

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.12

ecpChnlAckErr

The ecp channel ACK error info.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.13

ecpChnlPortAlias

The ecp channel port alias info.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.14

slpInfoListeningIPInterfaceTable

table

.1.3.6.1.4.1.20301.2.7.21.2.3.18.1.3 · 1 row entry · 2 columns

Open in standard view

A table with all the SLP listening IP interfaces.

slpInfoListeningIPInterfaceEntry entry .1.3.6.1.4.1.20301.2.7.21.2.3.18.1.3.1

The configuration objects for a SLP listening IP interface.

Indexes

listeningIPInterfaceId

Column	Syntax	OID
listeningIPInterfaceId The identifier of this IP interface.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.2.3.18.1.3.1.1`
listeningIPInterfaceAddress The adddress of this IP interface.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.20301.2.7.21.2.3.18.1.3.1.2`

slpInfoDirectoryAgentsTable

table

.1.3.6.1.4.1.20301.2.7.21.2.3.18.2.1 · 1 row entry · 3 columns

Open in standard view

A table with all the SLP Directory Agents.

slpInfoDirectoryAgentEntry entry .1.3.6.1.4.1.20301.2.7.21.2.3.18.2.1.1

The configuration objects for a Directory Agent entry.

Indexes

directoryAgentAddress

Column	Syntax	OID
directoryAgentAddress The IP adddress of this Directory Agent.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.20301.2.7.21.2.3.18.2.1.1.1`
directoryAgentPort The port of this Directory Agent. Communication can be done using TCP or UDP.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.2.3.18.2.1.1.2`
directoryAgentTime The time elapsed from the moment when this Directory Agent was learned measured in seconds.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.2.3.18.2.1.1.3`

slpInfoUserAgentsTable

table

.1.3.6.1.4.1.20301.2.7.21.2.3.18.3.1 · 1 row entry · 3 columns

Open in standard view

A table with all the SLP User Agents.

slpInfoUserAgentEntry entry .1.3.6.1.4.1.20301.2.7.21.2.3.18.3.1.1

The configuration objects for a User Agent entry.

Indexes

userAgentAddress

Column	Syntax	OID
userAgentAddress The IP adddress of this User Agent.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.20301.2.7.21.2.3.18.3.1.1.1`
userAgentPort The port of this User Agent. Communication can be done using TCP or UDP.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.2.3.18.3.1.1.2`
userAgentTime The time elapsed from the moment when this User Agent was learned measured in seconds.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.2.3.18.3.1.1.3`

ipCurCfgDataIntfTable

table

.1.3.6.1.4.1.20301.2.7.21.3.1.1.2 · 1 row entry · 6 columns

Open in standard view

The table of data IPv4/IPv6 interface in the current configuration block.

ipCurCfgDataIntfEntry entry .1.3.6.1.4.1.20301.2.7.21.3.1.1.2.1

A row in the data IPv4/IPv6 interface configuration table

Indexes

ipCurCfgDataIntfIndex

Column Syntax OID

ipCurCfgDataIntfIndex

The interface number for which the data IPv4/IPv6 interface information is related.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.3.1.1.2.1.1

ipCurCfgDataIntfAddr

The data IPv4/IPv6 address of the interface

OctetString

Constraints:
range: 0-40

.1.3.6.1.4.1.20301.2.7.21.3.1.1.2.1.2

ipCurCfgDataIntfMask

The subnet mask as IPv4 dotted-quads OR
the IPv6 prefix length (integer in range 0..128)
associated with this IP address .

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.20301.2.7.21.3.1.1.2.1.3

ipCurCfgDataIntfBroadcast obsolete

The broadcast address of the data IP interface.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.20301.2.7.21.3.1.1.2.1.4

ipCurCfgDataIntfVlan

The VLAN associated with the data IPv4/IPv6 interface.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.3.1.1.2.1.5

ipCurCfgDataIntfState

The state of the data IPv4/IPv6 interface.

Enumeration

Enumerated Values:

2	enabled
3	disabled

.1.3.6.1.4.1.20301.2.7.21.3.1.1.2.1.6

ipNewCfgDataIntfTable

table

.1.3.6.1.4.1.20301.2.7.21.3.1.1.3 · 1 row entry · 6 columns

Open in standard view

The table of data IPv4/IPv6 interface in the new configuration block.

ipNewCfgDataIntfEntry entry .1.3.6.1.4.1.20301.2.7.21.3.1.1.3.1

A row in the data IPv4/IPv6 interface table

Indexes

ipNewCfgDataIntfIndex

Column Syntax OID

ipNewCfgDataIntfIndex

The interface number for which the data IPv4/IPv6 information is related.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.3.1.1.3.1.1

ipNewCfgDataIntfAddr

This field configures the new data IPv4/IPv6 addr of the interface.
Address should be IPv4 dotted-quads or IPv6 16-byte hexadecimal
colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx…

OctetStringr/w

Constraints:
range: 0-40

.1.3.6.1.4.1.20301.2.7.21.3.1.1.3.1.2

ipNewCfgDataIntfMask

The subnet mask as IPv4 dotted-quads OR
the IPv6 prefix length (integer in range 0..128)
associated with this IP address .

OctetStringr/w

Constraints:
range: 0-15

.1.3.6.1.4.1.20301.2.7.21.3.1.1.3.1.3

ipNewCfgDataIntfVlan

The VLAN associated with the data IPv4/IPv6 interface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.3.1.1.3.1.4

ipNewCfgDataIntfState

The state of the data IPv4/IPv6 interface.

Enumerationr/w

Enumerated Values:

2	enabled
3	disabled

.1.3.6.1.4.1.20301.2.7.21.3.1.1.3.1.5

ipNewCfgDataIntfDelete

When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.

Enumerationr/w

Enumerated Values:

1	other
2	delete

.1.3.6.1.4.1.20301.2.7.21.3.1.1.3.1.6

ip4CurCfgMgmtIntfTable

table

.1.3.6.1.4.1.20301.2.7.21.3.1.1.5 · 1 row entry · 5 columns

Open in standard view

The table of fabric units management IPv4 interface in the current configuration block.

ip4CurCfgMgmtIntfEntry entry .1.3.6.1.4.1.20301.2.7.21.3.1.1.5.1

A row in the fabric unit management IPv4 interface configuration table

Indexes

ip4CurCfgMgmtIntfMac

Column Syntax OID

ip4CurCfgMgmtIntfMac

MAC address of the unit.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.20301.2.7.21.3.1.1.5.1.1

ip4CurCfgMgmtIntfAddr

The management IPv4 address of the interface.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.20301.2.7.21.3.1.1.5.1.2

ip4CurCfgMgmtIntfMask

The managemnt IPv4 subnet mask of the interface.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.20301.2.7.21.3.1.1.5.1.3

ip4CurCfgMgmtIntfDHCPState

The management IPv4 DHCP state of the interface.

Enumeration

Enumerated Values:

2	enabled
3	disabled

.1.3.6.1.4.1.20301.2.7.21.3.1.1.5.1.4

ip4CurCfgMgmtIntfState

The management IPv4 interface state.

Enumeration

Enumerated Values:

2	enabled
3	disabled

.1.3.6.1.4.1.20301.2.7.21.3.1.1.5.1.5

ip4NewCfgMgmtIntfTable

table

.1.3.6.1.4.1.20301.2.7.21.3.1.1.6 · 1 row entry · 6 columns

Open in standard view

The table of fabric units management IPv4 interface in the new configuration block.

ip4NewCfgMgmtIntfEntry entry .1.3.6.1.4.1.20301.2.7.21.3.1.1.6.1

A row in the fabric unit management IPv4 interface configuration table

Indexes

ip4NewCfgMgmtIntfMac

Column Syntax OID

ip4NewCfgMgmtIntfMac

MAC address of the unit.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.20301.2.7.21.3.1.1.6.1.1

ip4NewCfgMgmtIntfAddr

The management IPv4 address of the interface.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.20301.2.7.21.3.1.1.6.1.2

ip4NewCfgMgmtIntfMask

The management IPv4 subnet mask of the interface.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.20301.2.7.21.3.1.1.6.1.3

ip4NewCfgMgmtIntfState

The state of the management IPv4 interface.

Enumerationr/w

Enumerated Values:

2	enabled
3	disabled

.1.3.6.1.4.1.20301.2.7.21.3.1.1.6.1.4

ip4NewCfgMgmtIntfDHCPState

The DHCP state of the management IPv4 interface.

Enumerationr/w

Enumerated Values:

2	enabled
3	disabled

.1.3.6.1.4.1.20301.2.7.21.3.1.1.6.1.5

ip4NewCfgMgmtIntfDelete

When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.

Enumerationr/w

Enumerated Values:

1	other
2	delete

.1.3.6.1.4.1.20301.2.7.21.3.1.1.6.1.6

ip6CurCfgMgmtIntfTable

table

.1.3.6.1.4.1.20301.2.7.21.3.1.1.8 · 1 row entry · 4 columns

Open in standard view

The table of fabric units management IPv6 interface in the current configuration block.

ip6CurCfgMgmtIntfEntry entry .1.3.6.1.4.1.20301.2.7.21.3.1.1.8.1

A row in the fabric unit management IPv6 interface configuration table

Indexes

ip6CurCfgMgmtIntfMac

Column Syntax OID

ip6CurCfgMgmtIntfMac

MAC address of the unit.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.20301.2.7.21.3.1.1.8.1.1

ip6CurCfgMgmtIntfAddr

The management IPv6 address of the interface.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.3.1.1.8.1.2

ip6CurCfgMgmtIntfMask

The managemnt IPv6 prefix length of the interface.

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.20301.2.7.21.3.1.1.8.1.3

ip6CurCfgMgmtIntfState

The state of the management IPv6 interface.

Enumeration

Enumerated Values:

2	enabled
3	disabled

.1.3.6.1.4.1.20301.2.7.21.3.1.1.8.1.4

ip6NewCfgMgmtIntfTable

table

.1.3.6.1.4.1.20301.2.7.21.3.1.1.9 · 1 row entry · 5 columns

Open in standard view

The table of fabric units management IPv6 interface in the new configuration block.

ip6NewCfgMgmtIntfEntry entry .1.3.6.1.4.1.20301.2.7.21.3.1.1.9.1

A row in the fabric unit management IPv6 interface configuration table

Indexes

ip6NewCfgMgmtIntfMac

Column Syntax OID

ip6NewCfgMgmtIntfMac

MAC address of the unit.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.20301.2.7.21.3.1.1.9.1.1

ip6NewCfgMgmtIntfAddr

This field configures the new management IPv6 addr of the interface.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.3.1.1.9.1.2

ip6NewCfgMgmtIntfMask

The management IPv6 prefix length of the interface.

Integer32r/w

Constraints:
range: 0-128

.1.3.6.1.4.1.20301.2.7.21.3.1.1.9.1.3

ip6NewCfgMgmtIntfState

The state of the management IPv6 interface.

Enumerationr/w

Enumerated Values:

2	enabled
3	disabled

.1.3.6.1.4.1.20301.2.7.21.3.1.1.9.1.4

ip6NewCfgMgmtIntfDelete

When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.

Enumerationr/w

Enumerated Values:

1	other
2	delete

.1.3.6.1.4.1.20301.2.7.21.3.1.1.9.1.5

ip4CurCfgDataGwTable

table

.1.3.6.1.4.1.20301.2.7.21.3.1.2.2 · 1 row entry · 6 columns

Open in standard view

The table of data IPv4 gateways in the current configuration block.

ip4CurCfgDataGwEntry entry .1.3.6.1.4.1.20301.2.7.21.3.1.2.2.1

A row in the data IPv4 default gateway table

Indexes

ip4CurCfgDataGwIndex

Column Syntax OID

ip4CurCfgDataGwIndex

The default gateway number for which the data IPv4 default gateway information is related.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.3.1.2.2.1.1

ip4CurCfgDataGwAddr

The data IPv4 address of the default gateway.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.20301.2.7.21.3.1.2.2.1.2

ip4CurCfgDataGwInterval

The interval between ping attempts.

Integer32

Constraints:
range: 0-60

.1.3.6.1.4.1.20301.2.7.21.3.1.2.2.1.3

ip4CurCfgDataGwRetry

The number of failed attempts to declare the default gateway DOWN.

Integer32

Constraints:
range: 1-120

.1.3.6.1.4.1.20301.2.7.21.3.1.2.2.1.4

ip4CurCfgDataGwState

The state of the data IPv4 default gateway.

Enumeration

Enumerated Values:

2	enabled
3	disabled

.1.3.6.1.4.1.20301.2.7.21.3.1.2.2.1.5

ip4CurCfgDataGwArp

The state of ARP only health checks.

Enumeration

Enumerated Values:

2	enabled
3	disabled

.1.3.6.1.4.1.20301.2.7.21.3.1.2.2.1.6

ip4NewCfgDataGwTable

table

.1.3.6.1.4.1.20301.2.7.21.3.1.2.3 · 1 row entry · 7 columns

Open in standard view

The table of data IPv4 default gateway in the new configuration block.

ip4NewCfgDataGwEntry entry .1.3.6.1.4.1.20301.2.7.21.3.1.2.3.1

A row in the data IPv4 default gateway configuration table

Indexes

ip4NewCfgDataGwIndex

Column Syntax OID

ip4NewCfgDataGwIndex

The default gateway number for which the data IPv4 default gateway information is related.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.3.1.2.3.1.1

ip4NewCfgDataGwAddr

The data IPv4 address of the default gateway.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.20301.2.7.21.3.1.2.3.1.2

ip4NewCfgDataGwInterval

The interval in seconds between ping attempts.

Integer32r/w

Constraints:
range: 0-60

.1.3.6.1.4.1.20301.2.7.21.3.1.2.3.1.3

ip4NewCfgDataGwRetry

The number of failed attempts to declare the default gateway DOWN.

Integer32r/w

Constraints:
range: 1-120

.1.3.6.1.4.1.20301.2.7.21.3.1.2.3.1.4

ip4NewCfgDataGwState

The state of the data IPv4 default gateway.

Enumerationr/w

Enumerated Values:

2	enabled
3	disabled

.1.3.6.1.4.1.20301.2.7.21.3.1.2.3.1.5

ip4NewCfgDataGwDelete

When set to the value of 2 (delete), the entire row is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the row.

Enumerationr/w

Enumerated Values:

1	other
2	delete

.1.3.6.1.4.1.20301.2.7.21.3.1.2.3.1.6

ip4NewCfgDataGwArp

The state of the ARP only health checks.

Enumerationr/w

Enumerated Values:

2	enabled
3	disabled

.1.3.6.1.4.1.20301.2.7.21.3.1.2.3.1.7

ip6CurCfgDataGwTable

table

.1.3.6.1.4.1.20301.2.7.21.3.1.2.5 · 1 row entry · 3 columns

Open in standard view

The table of data IPv6 gateways in the current configuration block.

ip6CurCfgDataGwEntry entry .1.3.6.1.4.1.20301.2.7.21.3.1.2.5.1

A row in the data IPv6 default gateway table

Indexes

ip6CurCfgDataGwIndex

Column Syntax OID

ip6CurCfgDataGwIndex

The default gateway number for which the data IPv6 default gateway information is related.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.3.1.2.5.1.1

ip6CurCfgDataGwAddr

The data IPv6 address of the default gateway.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.3.1.2.5.1.2

ip6CurCfgDataGwState

The state of the data IPv6 default gateway.

Enumeration

Enumerated Values:

2	enabled
3	disabled

.1.3.6.1.4.1.20301.2.7.21.3.1.2.5.1.3

ip6NewCfgDataGwTable

table

.1.3.6.1.4.1.20301.2.7.21.3.1.2.6 · 1 row entry · 4 columns

Open in standard view

The table of data IPv6 default gateway in the new configuration block.

ip6NewCfgDataGwEntry entry .1.3.6.1.4.1.20301.2.7.21.3.1.2.6.1

A row in the data IPv6 default gateway configuration table

Indexes

ip6NewCfgDataGwIndex

Column Syntax OID

ip6NewCfgDataGwIndex

The default gateway number for which the data IPv6 default gateway information is related.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.3.1.2.6.1.1

ip6NewCfgDataGwAddr

This field configures the new data IPv6 addr of the default gateway.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.3.1.2.6.1.2

ip6NewCfgDataGwState

The state of the data IPv6 default gateway.

Enumerationr/w

Enumerated Values:

2	enabled
3	disabled

.1.3.6.1.4.1.20301.2.7.21.3.1.2.6.1.3

ip6NewCfgDataGwDelete

When set to the value of 2 (delete), the entire row is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the row.

Enumerationr/w

Enumerated Values:

1	other
2	delete

.1.3.6.1.4.1.20301.2.7.21.3.1.2.6.1.4

ip4CurCfgMgmtGwTable

table

.1.3.6.1.4.1.20301.2.7.21.3.1.2.8 · 1 row entry · 5 columns

Open in standard view

The table of fabric units management IPv4 default gateway in
current configuration block.

ip4CurCfgMgmtGwEntry entry .1.3.6.1.4.1.20301.2.7.21.3.1.2.8.1

A row in the fabric unit management IPv4 default gateway configuration table

Indexes

ip4CurCfgMgmtGwMac

Column Syntax OID

ip4CurCfgMgmtGwMac

MAC address of the unit.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.20301.2.7.21.3.1.2.8.1.1

ip4CurCfgMgmtGwAddr

The management IPv4 address of the default gateway.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.20301.2.7.21.3.1.2.8.1.2

ip4CurCfgMgmtGwInterval

The interval between ping attempts.

Integer32

Constraints:
range: 0-60

.1.3.6.1.4.1.20301.2.7.21.3.1.2.8.1.3

ip4CurCfgMgmtGwRetry

The number of failed attempts to declare the gateway DOWN.

Integer32

Constraints:
range: 1-120

.1.3.6.1.4.1.20301.2.7.21.3.1.2.8.1.4

ip4CurCfgMgmtGwState

The state of the management IPv4 default gateway.

Enumeration

Enumerated Values:

2	enabled
3	disabled

.1.3.6.1.4.1.20301.2.7.21.3.1.2.8.1.5

ip4NewCfgMgmtGwTable

table

.1.3.6.1.4.1.20301.2.7.21.3.1.2.9 · 1 row entry · 6 columns

Open in standard view

The table of fabric units management IPv4 default gateway in the
new configuration block.

ip4NewCfgMgmtGwEntry entry .1.3.6.1.4.1.20301.2.7.21.3.1.2.9.1

A row in the fabric unit management IPv4 default gateway configuration table

Indexes

ip4NewCfgMgmtGwMac

Column Syntax OID

ip4NewCfgMgmtGwMac

MAC address of the unit.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.20301.2.7.21.3.1.2.9.1.1

ip4NewCfgMgmtGwAddr

The management IPv4 address of the default gateway.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.20301.2.7.21.3.1.2.9.1.2

ip4NewCfgMgmtGwInterval

The interval between ping attempts.

Integer32r/w

Constraints:
range: 0-60

.1.3.6.1.4.1.20301.2.7.21.3.1.2.9.1.3

ip4NewCfgMgmtGwRetry

The number of failed attempts to declare the gateway DOWN.

Integer32r/w

Constraints:
range: 1-120

.1.3.6.1.4.1.20301.2.7.21.3.1.2.9.1.4

ip4NewCfgMgmtGwState

The state of the management IPv4 default gateway.

Enumerationr/w

Enumerated Values:

2	enabled
3	disabled

.1.3.6.1.4.1.20301.2.7.21.3.1.2.9.1.5

ip4NewCfgMgmtGwDelete

When set to the value of 2 (delete), the entire row is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the row.

Enumerationr/w

Enumerated Values:

1	other
2	delete

.1.3.6.1.4.1.20301.2.7.21.3.1.2.9.1.6

ip6CurCfgMgmtGwTable

table

.1.3.6.1.4.1.20301.2.7.21.3.1.2.11 · 1 row entry · 3 columns

Open in standard view

The table of fabric units management IPv6 default gateway in
current configuration block.

ip6CurCfgMgmtGwEntry entry .1.3.6.1.4.1.20301.2.7.21.3.1.2.11.1

A row in the fabric unit management IPv6 default gateway configuration table

Indexes

ip6CurCfgMgmtGwMac

Column Syntax OID

ip6CurCfgMgmtGwMac

MAC address of the unit.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.20301.2.7.21.3.1.2.11.1.1

ip6CurCfgMgmtGwAddr

The management IPv6 address of the default gateway.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.3.1.2.11.1.2

ip6CurCfgMgmtGwState

The state of the management IPv6 default gateway.

Enumeration

Enumerated Values:

2	enabled
3	disabled

.1.3.6.1.4.1.20301.2.7.21.3.1.2.11.1.3

ip6NewCfgMgmtGwTable

table

.1.3.6.1.4.1.20301.2.7.21.3.1.2.12 · 1 row entry · 4 columns

Open in standard view

The table of fabric units management IPv6 default gateway in the
new configuration block.

ip6NewCfgMgmtGwEntry entry .1.3.6.1.4.1.20301.2.7.21.3.1.2.12.1

A row in the fabric unit management IPv6 default gateway configuration table

Indexes

ip6NewCfgMgmtGwMac

Column Syntax OID

ip6NewCfgMgmtGwMac

MAC address of the unit.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.20301.2.7.21.3.1.2.12.1.1

ip6NewCfgMgmtGwAddr

The management IPv6 address of the default gateway.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.3.1.2.12.1.2

ip6NewCfgMgmtGwState

The state of the management IPv6 default gateway.

Enumerationr/w

Enumerated Values:

2	enabled
3	disabled

.1.3.6.1.4.1.20301.2.7.21.3.1.2.12.1.3

ip6NewCfgMgmtGwDelete

When set to the value of 2 (delete), the entire row is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the row.

Enumerationr/w

Enumerated Values:

1	other
2	delete

.1.3.6.1.4.1.20301.2.7.21.3.1.2.12.1.4

igmpStaticMrtrCurCfgTable

table

.1.3.6.1.4.1.20301.2.7.21.3.1.19.10.1 · 1 row entry · 5 columns

Open in standard view

The IGMP Static Multicast Router table in the current configuration block.

igmpStaticMrtrCurCfgTableEntry entry .1.3.6.1.4.1.20301.2.7.21.3.1.19.10.1.1

A row in the Static Multicast Router table.

Indexes

igmpStaticMrtrCurCfgIndx

Column Syntax OID

igmpStaticMrtrCurCfgIndx

The IGMP Multicast Router table port index.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.3.1.19.10.1.1.1

igmpStaticMrtrCurCfgPortId

The IGMP Multicast Router port in the current configuration block.

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.3.1.19.10.1.1.2

igmpStaticMrtrCurCfgVlanId

The IGMP Multicast Router port in the current configuration block.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.3.1.19.10.1.1.3

igmpStaticMrtrCurCfgVersion

The IGMP version of the IGMP Static Multicast Router.

Enumeration

Enumerated Values:

1	version1
2	version2
3	version3

.1.3.6.1.4.1.20301.2.7.21.3.1.19.10.1.1.4

igmpStaticMrtrCurCfgPortAlias

The IGMP Multicast Router port alias in the current configuration block.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.3.1.19.10.1.1.5

igmpStaticMrtrNewCfgTable

table

.1.3.6.1.4.1.20301.2.7.21.3.1.19.10.2 · 1 row entry · 6 columns

Open in standard view

The IGMP Static Multicast Router table in the new configuration block.

igmpStaticMrtrNewCfgTableEntry entry .1.3.6.1.4.1.20301.2.7.21.3.1.19.10.2.1

A row in the Static Multicast Router table.

Indexes

igmpStaticMrtrNewCfgIndx

Column Syntax OID

igmpStaticMrtrNewCfgIndx

The IGMP Multicast Router table port index.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.3.1.19.10.2.1.1

igmpStaticMrtrNewCfgPortId

The IGMP Multicast Router port in the new configuration block.

PortNumberr/w

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.3.1.19.10.2.1.2

igmpStaticMrtrNewCfgVlanId

The IGMP Multicast Router port in the new configuration block.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.3.1.19.10.2.1.3

igmpStaticMrtrNewCfgVersion

The IGMP version of the IGMP Static Multicast Router.

Enumerationr/w

Enumerated Values:

1	version1
2	version2
3	version3

.1.3.6.1.4.1.20301.2.7.21.3.1.19.10.2.1.4

igmpStaticMrtrNewCfgDelete

When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.

Enumerationr/w

Enumerated Values:

1	other
2	delete

.1.3.6.1.4.1.20301.2.7.21.3.1.19.10.2.1.5

igmpStaticMrtrNewCfgPortAlias

The IGMP Multicast Router port alias in the new configuration block.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.3.1.19.10.2.1.6

igmpFltCurCfgTable

table

.1.3.6.1.4.1.20301.2.7.21.3.1.19.11.1 · 1 row entry · 5 columns

Open in standard view

The IGMP filtering table in the current configuration block.

igmpFltCurCfgTableEntry entry .1.3.6.1.4.1.20301.2.7.21.3.1.19.11.1.1

A row in the filtering table.

Indexes

igmpFltCurCfgIndx

Column Syntax OID

igmpFltCurCfgIndx

The IGMP filter table index.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.3.1.19.11.1.1.1

igmpFltCurCfgMcastIp1

Range1 Multicast IP address to be filtered.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.20301.2.7.21.3.1.19.11.1.1.2

igmpFltCurCfgMcastIp2

Range2 Multicast IP address to be filtered.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.20301.2.7.21.3.1.19.11.1.1.3

igmpFltCurCfgAction

The action for the IGMP filtering rule.

Enumeration

Enumerated Values:

1	allow
2	deny

.1.3.6.1.4.1.20301.2.7.21.3.1.19.11.1.1.4

igmpFltCurCfgState

The state of this IGMP filtering rule.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.3.1.19.11.1.1.5

igmpFltNewCfgTable

table

.1.3.6.1.4.1.20301.2.7.21.3.1.19.11.2 · 1 row entry · 6 columns

Open in standard view

The IGMP filtering table in the current configuration block.

igmpFltNewCfgTableEntry entry .1.3.6.1.4.1.20301.2.7.21.3.1.19.11.2.1

A row in the filtering table.

Indexes

igmpFltNewCfgIndx

Column Syntax OID

igmpFltNewCfgIndx

The IGMP filter table index.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.3.1.19.11.2.1.1

igmpFltNewCfgMcastIp1

Range1 Multicast source IP address to be filtered.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.20301.2.7.21.3.1.19.11.2.1.2

igmpFltNewCfgMcastIp2

Range2 Multicast source IP address to be filtered.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.20301.2.7.21.3.1.19.11.2.1.3

igmpFltNewCfgAction

The action for the IGMP filtering rule.

Enumerationr/w

Enumerated Values:

1	allow
2	deny

.1.3.6.1.4.1.20301.2.7.21.3.1.19.11.2.1.4

igmpFltNewCfgState

The state of this IGMP filtering rule.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.3.1.19.11.2.1.5

igmpFltNewCfgDelete

When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.

Enumerationr/w

Enumerated Values:

1	other
2	delete

.1.3.6.1.4.1.20301.2.7.21.3.1.19.11.2.1.6

igmpFltCurCfgPortTable

table

.1.3.6.1.4.1.20301.2.7.21.3.1.19.11.3 · 1 row entry · 4 columns

Open in standard view

The IGMP filtering port table in the current configuration block.

igmpFltCurCfgPortTableEntry entry .1.3.6.1.4.1.20301.2.7.21.3.1.19.11.3.1

A row in the IGMP filtering port table.

Indexes

igmpFltCurCfgPortIndx

Column Syntax OID

igmpFltCurCfgPortIndx

The port index.

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.3.1.19.11.3.1.1

igmpFltCurCfgPortState

Enable or disable IGMP filtering.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.3.1.19.11.3.1.2

igmpFltCurCfgPortFiltBmap

The IGMP filtering rules applied to the port. The filtering rules are
presented in bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ …

OctetString

Constraints:
range: 0-256

.1.3.6.1.4.1.20301.2.7.21.3.1.19.11.3.1.3

igmpFltCurCfgPortAlias

The port alias.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.3.1.19.11.3.1.4

igmpFltNewCfgPortTable

table

.1.3.6.1.4.1.20301.2.7.21.3.1.19.11.4 · 1 row entry · 6 columns

Open in standard view

The IGMP filtering port table in the new configuration block.

igmpFltNewCfgPortTableEntry entry .1.3.6.1.4.1.20301.2.7.21.3.1.19.11.4.1

A row in the IGMP filtering port table.

Indexes

igmpFltNewCfgPortIndx

Column Syntax OID

igmpFltNewCfgPortIndx

The port index.

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.3.1.19.11.4.1.1

igmpFltNewCfgPortState

Enable or disable IGMP filtering.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.3.1.19.11.4.1.2

igmpFltNewCfgPortFiltBmap

The IGMP filtering rules applied to the port. The filtering rules
are presented in bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ f…

OctetString

Constraints:
range: 0-256

.1.3.6.1.4.1.20301.2.7.21.3.1.19.11.4.1.3

igmpFltNewCfgPortAddFiltRule

This is an action object to add filtering rule to a port. The value
specified with this object is the index to the fltNewCfgTable for
which filtering rule to be added to the port. The range of the
valid index is betw…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.3.1.19.11.4.1.4

igmpFltNewCfgPortRemFiltRule

This is an action object to remove filtering rule from a port. The
value specified with this object is the index to the fltNewCfgTable
for which filtering rule to be removed from the port. The range of
the valid inde…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.3.1.19.11.4.1.5

igmpFltNewCfgPortAlias

The port alias.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.3.1.19.11.4.1.6

igmpSnoopStats

table

.1.3.6.1.4.1.20301.2.7.21.3.2.9.1 · 1 row entry · 18 columns

Open in standard view

Statistics for IGMP Snooping.

igmpSnoopStatsEntry entry .1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1

Statistics for IGMP Snooping.

Indexes

igmpSnoopVlanIndex

Column Syntax OID

igmpSnoopVlanIndex

The index of the VLAN for which these statistics apply.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.1

rxIgmpValidPkts

The total number of valid IGMP packets received
on this VLAN.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.2

rxIgmpInvalidPkts

The total number of invalid IGMP packets received
on this VLAN.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.3

rxIgmpGenQueries

The total number of IGMP General Query packets received
on this VLAN.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.4

rxIgmpGrpSpecificQueries

The total number of IGMP Group Specific Query packets received
on this VLAN.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.5

rxIgmpLeaves

The total number of IGMP Leave packets received
on this VLAN.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.6

rxIgmpReports

The total number of IGMP Report packets received
on this VLAN.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.7

txIgmpGrpSpecificQueries

The total number of IGMP Group Specific Query packets
transmitted on this VLAN.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.8

txIgmpReports

The total number of IGMP Report packets transmitted
on this VLAN.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.9

txIgmpLeaves

The total number of IGMP Leave packets transmitted
on this VLAN.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.10

rxIgmpGroupSourceSpecificQueries

The total number of IGMP Group Source Specific (GSSQ) Queries received
on this VLAN.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.11

rxIgmpV3CurrentStateRecords

The total number of IGMP Current State Records (CSRs) received
on this VLAN.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.12

rxIgmpV3SourceListChangeRecords

The total number of IGMP Source List Change Records (SLCRs) received
on this VLAN.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.13

rxIgmpV3FilterChangeRecords

The total number of IGMP Filter Mode Change Records (FMCRs) received
on this VLAN.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.14

txIgmpGenQueries

The total number of IGMP General Query packets send
on this VLAN.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.16

rxIgmpDiscardPkts

The total number of IGMP packets discarded
on this VLAN.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.17

rxIgmpPimHellos

The total number of Pim Hello packets received
on this VLAN.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.18

igmpClearVlanStats

Setting this to clear(1) results in clearing the statistics for this
snooping VLAN.

Enumerationr/w

Enumerated Values:

1	clear
2	ok

.1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.19

ip4DataGwInfoTable

table

.1.3.6.1.4.1.20301.2.7.21.3.3.5.1 · 1 row entry · 3 columns

Open in standard view

The table of data IPv4 gateway information.

ip4DataGwInfoEntry entry .1.3.6.1.4.1.20301.2.7.21.3.3.5.1.1

A row in the data IPv4 gateway information table

Indexes

ip4DataGwInfoIndex

Column Syntax OID

ip4DataGwInfoIndex

The default gateway number for which the data IPv4 default gateway information is related.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.3.3.5.1.1.1

ip4DataGwInfoAddr

The data IPv4 default gateway address.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.20301.2.7.21.3.3.5.1.1.2

ip4DataGwInfoStatus

The data IPv4 default gateway status.

Enumeration

Enumerated Values:

1	up
2	failed

.1.3.6.1.4.1.20301.2.7.21.3.3.5.1.1.3

ip6DataGwInfoTable

table

.1.3.6.1.4.1.20301.2.7.21.3.3.5.2 · 1 row entry · 3 columns

Open in standard view

The table of data IPv6 gateway information.

ip6DataGwInfoEntry entry .1.3.6.1.4.1.20301.2.7.21.3.3.5.2.1

A row in the data IPv6 gateway information table

Indexes

ip6DataGwInfoIndex

Column Syntax OID

ip6DataGwInfoIndex

The default gateway number for which the data IPv6 default gateway information is related.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.3.3.5.2.1.1

ip6DataGwInfoAddr

The data IPv6 default gateway address.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.3.3.5.2.1.2

ip6DataGwInfoState

The data IPv6 default gateway state.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.20301.2.7.21.3.3.5.2.1.3

ip4MgmtGwInfoTable

table

.1.3.6.1.4.1.20301.2.7.21.3.3.5.3 · 1 row entry · 3 columns

Open in standard view

The table of mgmt IPv4 gateway information.

ip4MgmtGwInfoEntry entry .1.3.6.1.4.1.20301.2.7.21.3.3.5.3.1

A row in the mgmt IPv4 gateway information table

Indexes

ip4MgmtGwInfoMac

Column Syntax OID

ip4MgmtGwInfoMac

MAC address of the unit.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.20301.2.7.21.3.3.5.3.1.1

ip4MgmtGwInfoAddr

The mgmt IPv4 default gateway address.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.20301.2.7.21.3.3.5.3.1.2

ip4MgmtGwInfoState

The mgmt IPv4 default gateway state.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.20301.2.7.21.3.3.5.3.1.3

ip6MgmtGwInfoTable

table

.1.3.6.1.4.1.20301.2.7.21.3.3.5.4 · 1 row entry · 3 columns

Open in standard view

The table of mgmt IPv6 gateway information.

ip6MgmtGwInfoEntry entry .1.3.6.1.4.1.20301.2.7.21.3.3.5.4.1

A row in the mgmt IPv6 gateway information table

Indexes

ip6MgmtGwInfoMac

Column Syntax OID

ip6MgmtGwInfoMac

MAC address of the unit.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.20301.2.7.21.3.3.5.4.1.1

ip6MgmtGwInfoAddr

The mgmt IPv6 default gateway address.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.3.3.5.4.1.2

ip6MgmtGwInfoState

The mgmt IPv6 default gateway state.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.20301.2.7.21.3.3.5.4.1.3

igmpInfoTable

table

.1.3.6.1.4.1.20301.2.7.21.3.3.6.1 · 1 row entry · 12 columns

Open in standard view

The table of IGMP group membership information.

igmpInfoEntry entry .1.3.6.1.4.1.20301.2.7.21.3.3.6.1.1

Information about an IGMP group member .

Indexes

igmpInfoIndex

Column Syntax OID

igmpInfoIndex

The igmp group number for which the IGMP info table is related.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.3.3.6.1.1.1

igmpInfoGroupId

The IP address of the IGMP group.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.20301.2.7.21.3.3.6.1.1.2

igmpInfoVlanId

The VLAN ID for this IGMP group.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.3.3.6.1.1.3

igmpInfoSrcTrunk

The downstream trunk number.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.3.3.6.1.1.4

igmpInfoSrcPortIndex

The downstream port number.

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.3.3.6.1.1.5

igmpInfoVersion

The Version of IGMP host.

Enumeration

Enumerated Values:

1	v3
2	v2
3	v1

.1.3.6.1.4.1.20301.2.7.21.3.3.6.1.1.6

igmpInfoExpires

The expiration time for this host.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.3.3.6.1.1.7

igmpInfoMode

The IGMPv3 filter-mode for this host.
Returned values:
exclude(1) - the IGMPv3 filter-mode is exclude.
include(2) - the IGMPv3 filter-mode is include.
na(3) - not applicable(v1 and v2).

Enumeration

Enumerated Values:

1	exclude
2	include
3	na

.1.3.6.1.4.1.20301.2.7.21.3.3.6.1.1.8

igmpInfoSourceIp

The source IP address of the IGMP group.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.20301.2.7.21.3.3.6.1.1.9

igmpInfoFwd

The IGMPv3 forwarding for this source/group IP for this host.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.20301.2.7.21.3.3.6.1.1.10

igmpInfoGrpExpires

The expiration time for the group.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.3.3.6.1.1.11

igmpInfoSrcPortAlias

The downstream port alias.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.3.3.6.1.1.12

igmpMrtrInfoTable

table

.1.3.6.1.4.1.20301.2.7.21.3.3.6.2 · 1 row entry · 10 columns

Open in standard view

The table of IGMP mrouters.

igmpMrtrInfoEntry entry .1.3.6.1.4.1.20301.2.7.21.3.3.6.2.1

Information about an IGMP mrouter.

Indexes

igmpMrtrInfoIndex

Column Syntax OID

igmpMrtrInfoIndex

The mrouter number for which the IGMP mrouter info table is related.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.3.3.6.2.1.1

igmpMrtrInfoVlanId

The VLAN ID on which this IGMP mrouter is attached.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.3.3.6.2.1.2

igmpMrtrInfoPortId

The port/portchannel alias on which this IGMP mrouter is attached.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.3.3.6.2.1.3

igmpMrtrInfoVersion

The version of this IGMP mrouter.

Enumeration

Enumerated Values:

1	v1
2	v2
3	v3
4	pim

.1.3.6.1.4.1.20301.2.7.21.3.3.6.2.1.4

igmpMrtrInfoExpires

The expiration time for this mrouter.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.3.3.6.2.1.5

igmpMrtrInfoMrt

The Maximum Query Response time of this IGMP mrouter.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.3.3.6.2.1.6

igmpMrtrInfoQrv

The Querier Robustness value of this IGMP mrouter.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.3.3.6.2.1.7

igmpMrtrInfoQqic

The Querier query interval code of this IGMP mrouter.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.3.3.6.2.1.8

igmpMrtrInfoSrcIp

The Source IP of this IGMP mrouter.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.20301.2.7.21.3.3.6.2.1.10

igmpMrtrInfoPortAlias

The port/portchannel alias on which this IGMP mrouter is attached.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.3.3.6.2.1.11

ipDataIntfInfoTable

table

.1.3.6.1.4.1.20301.2.7.21.3.3.9.1 · 1 row entry · 6 columns

Open in standard view

The table of data IPv4/IPv6 interface information.

ipDataIntfInfoEntry entry .1.3.6.1.4.1.20301.2.7.21.3.3.9.1.1

A row in the data IPv4/IPv6 interface information table.

Indexes

ipDataIntfInfoIndex

Column Syntax OID

ipDataIntfInfoIndex

The interface number for which the data IPv4/IPv6 interface information is related.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.3.3.9.1.1.1

ipDataIntfInfoAddr

The data IPv4/IPv6 address of the interface.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.3.3.9.1.1.2

ipDataIntfInfoMask

The subnet mask as IPv4 dotted-quads OR
the IPv6 prefix length (integer in range 0..128)
associated with this IP address.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.3.3.9.1.1.3

ipDataIntfInfoBcastAddr

The data IP broadcast address of the interface.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.3.3.9.1.1.4

ipDataIntfInfoVlan

The data IPv4/IPv6 VLAN state associated with the interface.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.3.3.9.1.1.5

ipDataIntfInfoStatus

The data IPv4/IPv6 interface state.

Enumeration

Enumerated Values:

1	up
2	down
3	disabled

.1.3.6.1.4.1.20301.2.7.21.3.3.9.1.1.6

ip4MgmtIntfInfoTable

table

.1.3.6.1.4.1.20301.2.7.21.3.3.9.2 · 1 row entry · 5 columns

Open in standard view

The table of fabric unit management IPv4 interface information.

ip4MgmtIntfInfoEntry entry .1.3.6.1.4.1.20301.2.7.21.3.3.9.2.1

A row in the fabric unit management IPv4 interface information table.

Indexes

ip4MgmtIntfInfoMac

Column Syntax OID

ip4MgmtIntfInfoMac

MAC address of the unit.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.20301.2.7.21.3.3.9.2.1.1

ip4MgmtIntfInfoAddr

The management IPv4 address of the interface.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.20301.2.7.21.3.3.9.2.1.2

ip4MgmtIntfInfoMask

The management IPv4 subnet mask of the interface.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.20301.2.7.21.3.3.9.2.1.3

ip4MgmtIntfInfoDHCPState

The management IPv4 DHCP state of the interface.

Enumeration

Enumerated Values:

2	enabled
3	disabled

.1.3.6.1.4.1.20301.2.7.21.3.3.9.2.1.4

ip4MgmtIntfInfoStatus

The management IPv4 interface state.

Enumeration

Enumerated Values:

1	up
2	down
3	disabled

.1.3.6.1.4.1.20301.2.7.21.3.3.9.2.1.5

ip6MgmtIntfInfoTable

table

.1.3.6.1.4.1.20301.2.7.21.3.3.9.3 · 1 row entry · 4 columns

Open in standard view

The table of fabric unit management IPv6 interface information.

ip6MgmtIntfInfoEntry entry .1.3.6.1.4.1.20301.2.7.21.3.3.9.3.1

A row in the fabric unit management IPv6 interface information table.

Indexes

ip6MgmtIntfInfoMac

Column Syntax OID

ip6MgmtIntfInfoMac

MAC address of the unit.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.20301.2.7.21.3.3.9.3.1.1

ip6MgmtIntfInfoAddr

The management IPv6 address of the interface.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.3.3.9.3.1.2

ip6MgmtIntfInfoMask

The management IPv6 prefix length of the interface.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.3.3.9.3.1.3

ip6MgmtIntfInfoStatus

The management IPv6 interface state.

Enumeration

Enumerated Values:

1	up
2	down
3	disabled

.1.3.6.1.4.1.20301.2.7.21.3.3.9.3.1.4

ip4MgmtEmbeddedIntfInfoTable

table

.1.3.6.1.4.1.20301.2.7.21.3.3.9.4 · 1 row entry · 5 columns

Open in standard view

The table of fabric unit internal management IPv4 interface information. These interfaces are only present on embedded members

ip4MgmtEmbeddedIntfInfoEntry entry .1.3.6.1.4.1.20301.2.7.21.3.3.9.4.1

A row in the fabric unit management IPv4 interface information table.

Indexes

ip4MgmtEmbeddedIntfInfoMac

Column Syntax OID

ip4MgmtEmbeddedIntfInfoMac

MAC address of the unit.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.20301.2.7.21.3.3.9.4.1.1

ip4MgmtEmbeddedIntfInfoAddr

The management IPv4 address of the interface.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.20301.2.7.21.3.3.9.4.1.2

ip4MgmtEmbeddedIntfInfoMask

The management IPv4 subnet mask of the interface.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.20301.2.7.21.3.3.9.4.1.3

ip4MgmtEmbeddedIntfInfoDHCPState

The management IPv4 DHCP state of the interface.

Enumeration

Enumerated Values:

2	enabled
3	disabled

.1.3.6.1.4.1.20301.2.7.21.3.3.9.4.1.4

ip4MgmtEmbeddedIntfInfoStatus

The management IPv4 interface state.

Enumeration

Enumerated Values:

1	up
2	down
3	disabled

.1.3.6.1.4.1.20301.2.7.21.3.3.9.4.1.5

qosCurCfgPortPriorityTable

table

.1.3.6.1.4.1.20301.2.7.21.8.1.1.1 · 1 row entry · 3 columns

Open in standard view

The table of QOS Port Priority configuration.

qosCurCfgPortPriorityEntry entry .1.3.6.1.4.1.20301.2.7.21.8.1.1.1.1

Information about a particular QOS Port Priority configuration.

Indexes

qosCurCfgPortIndex

Column	Syntax	OID
qosCurCfgPortIndex Switch Port Number	PortNumber Textual Convention: PortNumber `Unsigned32`	`.1.3.6.1.4.1.20301.2.7.21.8.1.1.1.1.1`
qosCurCfgPortPriority Switch Port Priority Should be between 0 and 7	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.20301.2.7.21.8.1.1.1.1.2`
qosCurCfgPortAlias Switch Port Alias	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.8.1.1.1.1.3`

qosNewCfgPortPriorityTable

table

.1.3.6.1.4.1.20301.2.7.21.8.1.1.2 · 1 row entry · 3 columns

Open in standard view

The table of QOS Port Priority configuration.

qosNewCfgPortPriorityEntry entry .1.3.6.1.4.1.20301.2.7.21.8.1.1.2.1

Information about a particular QOS Port Priority configuration.

Indexes

qosNewCfgPortIndex

Column	Syntax	OID
qosNewCfgPortIndex Switch Port Number	PortNumber Textual Convention: PortNumber `Unsigned32`	`.1.3.6.1.4.1.20301.2.7.21.8.1.1.2.1.1`
qosNewCfgPortPriority Switch Port Priority Should be between 0 and 7	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.20301.2.7.21.8.1.1.2.1.2`
qosNewCfgPortAlias Switch Port Alias	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.8.1.1.2.1.3`

qosCurCfgPriorityCoSTable

table

.1.3.6.1.4.1.20301.2.7.21.8.1.1.3 · 1 row entry · 2 columns

Open in standard view

The table of Frame Priority and COSq configuration.

qosCurCfgPriorityCoSEntry entry .1.3.6.1.4.1.20301.2.7.21.8.1.1.3.1

Information about a particular Frame Priority and COSq configuration.

Indexes

qosCurCfgPriorityIndex

Column	Syntax	OID
qosCurCfgPriorityIndex Frame priority Number	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.20301.2.7.21.8.1.1.3.1.1`
qosCurCfgPriorityCoSq CoSq for a Frame Priority Should be between 0 and 7	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.20301.2.7.21.8.1.1.3.1.2`

qosNewCfgPriorityCoSTable

table

.1.3.6.1.4.1.20301.2.7.21.8.1.1.4 · 1 row entry · 2 columns

Open in standard view

The table of Frame Priority and COSq configuration.

qosNewCfgPriorityCoSEntry entry .1.3.6.1.4.1.20301.2.7.21.8.1.1.4.1

Information about a particular Frame Priority and COSq configuration.

Indexes

qosNewCfgPriorityIndex

Column	Syntax	OID
qosNewCfgPriorityIndex Frame priority Number	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.20301.2.7.21.8.1.1.4.1.1`
qosNewCfgPriorityCoSq CoSq for a Frame Priority Should be between 0 and 7	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.20301.2.7.21.8.1.1.4.1.2`

qosCurCfgCosWeightTable

table

.1.3.6.1.4.1.20301.2.7.21.8.1.1.5 · 1 row entry · 2 columns

Open in standard view

The table of CoSq and Weight configuration.

qosCurCfgCosWeightEntry entry .1.3.6.1.4.1.20301.2.7.21.8.1.1.5.1

Information about a particular CoSq and Weight configuration.

Indexes

qosCurCfgCosIndex

Column	Syntax	OID
qosCurCfgCosIndex CoSq Number	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.20301.2.7.21.8.1.1.5.1.1`
qosCurCfgCosWeight Weight of CoSq	Integer32 Constraints: `range: 0-15`	`.1.3.6.1.4.1.20301.2.7.21.8.1.1.5.1.2`

qosNewCfgCosWeightTable

table

.1.3.6.1.4.1.20301.2.7.21.8.1.1.6 · 1 row entry · 2 columns

Open in standard view

The table of CoSq and Weight configuration.

qosNewCfgCosWeightEntry entry .1.3.6.1.4.1.20301.2.7.21.8.1.1.6.1

Information about a particular CoSq and Weight configuration.

Indexes

qosNewCfgCosIndex

Column	Syntax	OID
qosNewCfgCosIndex CoSq Number	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.20301.2.7.21.8.1.1.6.1.1`
qosNewCfgCosWeight Weight of CoSq	Integer32r/w Constraints: `range: 0-15`	`.1.3.6.1.4.1.20301.2.7.21.8.1.1.6.1.2`

qosCurCfgMcPriorityCoSTable

table

.1.3.6.1.4.1.20301.2.7.21.8.1.1.7 · 1 row entry · 2 columns

Open in standard view

The table of Frame Priority and Multicast COSq configuration.

qosCurCfgMcPriorityCoSEntry entry .1.3.6.1.4.1.20301.2.7.21.8.1.1.7.1

Information about a particular Frame Priority and Multicast COSq configuration.

Indexes

qosCurCfgMcPriorityIndex

Column	Syntax	OID
qosCurCfgMcPriorityIndex Frame priority Number	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.20301.2.7.21.8.1.1.7.1.1`
qosCurCfgMcPriorityCoSq Multicast CoSq for a Frame Priority Should be between 8 and 11	Integer32 Constraints: `range: 8-11`	`.1.3.6.1.4.1.20301.2.7.21.8.1.1.7.1.2`

qosNewCfgMcPriorityCoSTable

table

.1.3.6.1.4.1.20301.2.7.21.8.1.1.8 · 1 row entry · 2 columns

Open in standard view

The table of Frame Priority and Multicast COSq configuration.

qosNewCfgMcPriorityCoSEntry entry .1.3.6.1.4.1.20301.2.7.21.8.1.1.8.1

Information about a particular Frame Priority and Multicast COSq configuration.

Indexes

qosNewCfgMcPriorityIndex

Column	Syntax	OID
qosNewCfgMcPriorityIndex Frame priority Number	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.20301.2.7.21.8.1.1.8.1.1`
qosNewCfgMcPriorityCoSq Multicast CoSq for a Frame Priority Should be between 8 and 11	Integer32r/w Constraints: `range: 8-11`	`.1.3.6.1.4.1.20301.2.7.21.8.1.1.8.1.2`

qosCurCfgMcCosWeightTable

table

.1.3.6.1.4.1.20301.2.7.21.8.1.1.9 · 1 row entry · 2 columns

Open in standard view

The table of Mc CoSq and Weight configuration.

qosCurCfgMcCosWeightEntry entry .1.3.6.1.4.1.20301.2.7.21.8.1.1.9.1

Information about a particular Mc CoSq and Weight configuration.

Indexes

qosCurCfgMcCosIndex

Column	Syntax	OID
qosCurCfgMcCosIndex Multicast CoSq Number	Integer32 Constraints: `range: 8-11`	`.1.3.6.1.4.1.20301.2.7.21.8.1.1.9.1.1`
qosCurCfgMcCosWeight Weight of Mc CoSq	Integer32 Constraints: `range: 0-15`	`.1.3.6.1.4.1.20301.2.7.21.8.1.1.9.1.2`

qosNewCfgMcCosWeightTable

table

.1.3.6.1.4.1.20301.2.7.21.8.1.1.10 · 1 row entry · 2 columns

Open in standard view

The table of Mc CoSq and Weight configuration.

qosNewCfgMcCosWeightEntry entry .1.3.6.1.4.1.20301.2.7.21.8.1.1.10.1

Information about a particular Mc CoSq and Weight configuration.

Indexes

qosNewCfgMcCosIndex

Column	Syntax	OID
qosNewCfgMcCosIndex Multicast CoSq Number	Integer32 Constraints: `range: 8-11`	`.1.3.6.1.4.1.20301.2.7.21.8.1.1.10.1.1`
qosNewCfgMcCosWeight Weight of Mc CoSq	Integer32r/w Constraints: `range: 0-15`	`.1.3.6.1.4.1.20301.2.7.21.8.1.1.10.1.2`

qosCurCfgDscpTable

table

.1.3.6.1.4.1.20301.2.7.21.8.1.2.1 · 1 row entry · 3 columns

Open in standard view

The table of Dscp to New Dscp/802.1p priority configuration.

qosCurCfgDscpEntry entry .1.3.6.1.4.1.20301.2.7.21.8.1.2.1.1

Information about a particular Dscp to New Dscp/802.1p priority configuration

Indexes

qosCurCfgDscpIndex

Column	Syntax	OID
qosCurCfgDscpIndex Dscp value	Integer32 Constraints: `range: 0-63`	`.1.3.6.1.4.1.20301.2.7.21.8.1.2.1.1.1`
qosCurCfgMapDscp Map Dscp Value	Integer32 Constraints: `range: 0-63`	`.1.3.6.1.4.1.20301.2.7.21.8.1.2.1.1.2`
qosCurCfgMap8021p Map 802.1p value	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.20301.2.7.21.8.1.2.1.1.3`

qosNewCfgDscpTable

table

.1.3.6.1.4.1.20301.2.7.21.8.1.2.2 · 1 row entry · 3 columns

Open in standard view

The table of Dscp to New Dscp/802.1p priority configuration.

qosNewCfgDscpEntry entry .1.3.6.1.4.1.20301.2.7.21.8.1.2.2.1

Information about a particular Dscp to New Dscp/802.1p priority configuration

Indexes

qosNewCfgDscpIndex

Column	Syntax	OID
qosNewCfgDscpIndex Dscp value	Integer32 Constraints: `range: 0-63`	`.1.3.6.1.4.1.20301.2.7.21.8.1.2.2.1.1`
qosNewCfgMapDscp Map Dscp Value	Integer32r/w Constraints: `range: 0-63`	`.1.3.6.1.4.1.20301.2.7.21.8.1.2.2.1.2`
qosNewCfgMap8021p Map 802.1p value	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.20301.2.7.21.8.1.2.2.1.3`

qosCurCfgPortProfileTable

table

.1.3.6.1.4.1.20301.2.7.21.8.1.3.1 · 1 row entry · 10 columns

Open in standard view

The table of QOS port WRED ECN profile configuration.

qoSCurCfgPortProfileEntry entry .1.3.6.1.4.1.20301.2.7.21.8.1.3.1.1

Information about a particular Transmit queue of a port WRED ECN profile configuration.

Indexes

qosCurCfgProfilePortIndex qosCurCfgTrqIndex

Column Syntax OID

qosCurCfgProfilePortIndex

Switch Port Number

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.8.1.3.1.1.1

qosCurCfgTrqIndex

Transmit Queue Number

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.20301.2.7.21.8.1.3.1.1.2

qosCurCfgTrqNonTcpMin

Port Transmit queue WRED ECN nontcp profile MinThreshold value.

Integer32

Constraints:
range: 1-100

.1.3.6.1.4.1.20301.2.7.21.8.1.3.1.1.3

qosCurCfgTrqNonTcpMax

Port Transmit queue WRED ECN nontcp profile MaxThreshold value

Integer32

Constraints:
range: 1-100

.1.3.6.1.4.1.20301.2.7.21.8.1.3.1.1.4

qosCurCfgTrqNonTcpRate

Port Transmit queue WRED ECN nontcp profile DropRate value.

Integer32

Constraints:
range: 1-100

.1.3.6.1.4.1.20301.2.7.21.8.1.3.1.1.5

qosCurCfgTrqTcpMin

Port Transmit queue WRED ECN tcp profile MinThreshold value.

Integer32

Constraints:
range: 1-100

.1.3.6.1.4.1.20301.2.7.21.8.1.3.1.1.6

qosCurCfgTrqTcpMax

Port Transmit queue WRED ECN tcp profile MaxThreshold value

Integer32

Constraints:
range: 1-100

.1.3.6.1.4.1.20301.2.7.21.8.1.3.1.1.7

qosCurCfgTrqTcpRate

Port Transmit queue WRED ECN tcp profile DropRate value.

Integer32

Constraints:
range: 1-100

.1.3.6.1.4.1.20301.2.7.21.8.1.3.1.1.8

qosCurCfgPortTrqWredState

This is for turning on/off WRED per transmit queue per port.

Enumeration

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.20301.2.7.21.8.1.3.1.1.9

qosCurCfgProfilePortAlias

The port alias.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.8.1.3.1.1.10

qosNewCfgPortProfileTable

table

.1.3.6.1.4.1.20301.2.7.21.8.1.3.2 · 1 row entry · 10 columns

Open in standard view

The table of QOS Port WRED ECN configuration.

qoSNewCfgPortProfileEntry entry .1.3.6.1.4.1.20301.2.7.21.8.1.3.2.1

Information about a particular Transmit queue of a port WRED ECN configuration.

Indexes

qosNewCfgProfilePortIndex qosNewCfgTrqIndex

Column Syntax OID

qosNewCfgProfilePortIndex

Switch Port Number

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.8.1.3.2.1.1

qosNewCfgTrqIndex

Transmit Queue Number

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.20301.2.7.21.8.1.3.2.1.2

qosNewCfgTrqNonTcpMin

Port Transmit queue WRED ECN nontcp profile MinThreshold value.

Integer32r/w

Constraints:
range: 1-100

.1.3.6.1.4.1.20301.2.7.21.8.1.3.2.1.3

qosNewCfgTrqNonTcpMax

Port Transmit queue WRED ECN nontcp profile MaxThreshold value.

Integer32r/w

Constraints:
range: 1-100

.1.3.6.1.4.1.20301.2.7.21.8.1.3.2.1.4

qosNewCfgTrqNonTcpRate

Port Transmit queue WRED ECN nontcp profile DropRate value.

Integer32r/w

Constraints:
range: 1-100

.1.3.6.1.4.1.20301.2.7.21.8.1.3.2.1.5

qosNewCfgTrqTcpMin

Port Transmit queue WRED ECN tcp profile MinThreshold value.

Integer32r/w

Constraints:
range: 1-100

.1.3.6.1.4.1.20301.2.7.21.8.1.3.2.1.6

qosNewCfgTrqTcpMax

Port Transmit queue WRED ECN tcp profile MaxThreshold value.

Integer32r/w

Constraints:
range: 1-100

.1.3.6.1.4.1.20301.2.7.21.8.1.3.2.1.7

qosNewCfgTrqTcpRate

Port Transmit queue WRED ECN tcp profile DropRate value.

Integer32r/w

Constraints:
range: 1-100

.1.3.6.1.4.1.20301.2.7.21.8.1.3.2.1.8

qosNewCfgPortTrqWredState

This is for turning on/off WRED per transmit queue per port.

Enumerationr/w

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.20301.2.7.21.8.1.3.2.1.9

qosNewCfgProfilePortAlias

The port alias.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.8.1.3.2.1.10

qosCurCfgPortStateTable

table

.1.3.6.1.4.1.20301.2.7.21.8.1.3.3 · 1 row entry · 4 columns

Open in standard view

The table of QOS port WRED ECN state configuration.

qoSCurCfgPortStateEntry entry .1.3.6.1.4.1.20301.2.7.21.8.1.3.3.1

Information about a particular port WRED ECN state configuration.

Indexes

qosCurCfgStatePortIndex

Column Syntax OID

qosCurCfgStatePortIndex

Switch Port Number

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.8.1.3.3.1.1

qosCurCfgPortWredState

This is for turning on/off WRED per port.

Enumeration

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.20301.2.7.21.8.1.3.3.1.2

qosCurCfgPortEcnState

This is for turning on/off ECN per port.

Enumeration

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.20301.2.7.21.8.1.3.3.1.3

qosCurCfgStatePortAlias

Switch Port Alias

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.8.1.3.3.1.4

qosNewCfgPortStateTable

table

.1.3.6.1.4.1.20301.2.7.21.8.1.3.4 · 1 row entry · 4 columns

Open in standard view

The table of QOS port WRED ECN state configuration.

qoSNewCfgPortStateEntry entry .1.3.6.1.4.1.20301.2.7.21.8.1.3.4.1

Information about a particular port WRED ECN state configuration.

Indexes

qosNewCfgStatePortIndex

Column Syntax OID

qosNewCfgStatePortIndex

Switch Port Number

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.8.1.3.4.1.1

qosNewCfgPortWredState

This is for turning on/off WRED per port

Enumerationr/w

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.20301.2.7.21.8.1.3.4.1.2

qosNewCfgPortEcnState

This is for turning on/off ECN per port.

Enumerationr/w

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.20301.2.7.21.8.1.3.4.1.3

qosNewCfgStatePortAlias

Switch Port Alias

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.8.1.3.4.1.4

qosCurCfgGlobalProfileTable

table

.1.3.6.1.4.1.20301.2.7.21.8.1.3.5 · 1 row entry · 8 columns

Open in standard view

The table of QOS global WRED ECN profile configuration.

qoSCurCfgGlobalProfileEntry entry .1.3.6.1.4.1.20301.2.7.21.8.1.3.5.1

Information about a particular Transmit queue of global WRED ECN profile configuration.

Indexes

qosCurCfgGlobalTrqIndex

Column Syntax OID

qosCurCfgGlobalTrqIndex

Global Transmit Queue Number

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.20301.2.7.21.8.1.3.5.1.1

qosCurCfgGlobalTrqNonTcpMin

Global transmit queue WRED ECN nontcp profile MinThreshold value

Integer32

Constraints:
range: 1-100

.1.3.6.1.4.1.20301.2.7.21.8.1.3.5.1.2

qosCurCfgGlobalTrqNonTcpMax

Global transmit queue WRED ECN nontcp profile MaxThreshold value

Integer32

Constraints:
range: 1-100

.1.3.6.1.4.1.20301.2.7.21.8.1.3.5.1.3

qosCurCfgGlobalTrqNonTcpRate

Global transmit queue WRED ECN nontcp profile DropRate value

Integer32

Constraints:
range: 1-100

.1.3.6.1.4.1.20301.2.7.21.8.1.3.5.1.4

qosCurCfgGlobalTrqTcpMin

Global transmit queue WRED ECN tcp profile MinThreshold value

Integer32

Constraints:
range: 1-100

.1.3.6.1.4.1.20301.2.7.21.8.1.3.5.1.5

qosCurCfgGlobalTrqTcpMax

Global transmit queue WRED ECN tcp profile MaxThreshold value

Integer32

Constraints:
range: 1-100

.1.3.6.1.4.1.20301.2.7.21.8.1.3.5.1.6

qosCurCfgGlobalTrqTcpRate

Global transmit queue WRED ECN tcp profile DropRate value

Integer32

Constraints:
range: 1-100

.1.3.6.1.4.1.20301.2.7.21.8.1.3.5.1.7

qosCurCfgGlobalTrqWredState

This is for turning on/off WRED per global transmit queue

Enumeration

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.20301.2.7.21.8.1.3.5.1.8

qosNewCfgGlobalProfileTable

table

.1.3.6.1.4.1.20301.2.7.21.8.1.3.6 · 1 row entry · 8 columns

Open in standard view

The table of QOS global WRED ECN profile configuration.

qoSNewCfgGlobalProfileEntry entry .1.3.6.1.4.1.20301.2.7.21.8.1.3.6.1

Information about a particular Transmit queue of global WRED ECN profile configuration.

Indexes

qosNewCfgGlobalTrqIndex

Column Syntax OID

qosNewCfgGlobalTrqIndex

Global Transmit Queue Number

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.20301.2.7.21.8.1.3.6.1.1

qosNewCfgGlobalTrqNonTcpMin

Global transmit queue WRED ECN nontcp profile MinThreshold value

Integer32r/w

Constraints:
range: 1-100

.1.3.6.1.4.1.20301.2.7.21.8.1.3.6.1.2

qosNewCfgGlobalTrqNonTcpMax

Global transmit queue WRED ECN nontcp profile MaxThreshold value

Integer32r/w

Constraints:
range: 1-100

.1.3.6.1.4.1.20301.2.7.21.8.1.3.6.1.3

qosNewCfgGlobalTrqNonTcpRate

Global transmit queue WRED ECN nontcp profile DropRate value

Integer32r/w

Constraints:
range: 1-100

.1.3.6.1.4.1.20301.2.7.21.8.1.3.6.1.4

qosNewCfgGlobalTrqTcpMin

Global transmit queue WRED ECN tcp profile MinThreshold value

Integer32r/w

Constraints:
range: 1-100

.1.3.6.1.4.1.20301.2.7.21.8.1.3.6.1.5

qosNewCfgGlobalTrqTcpMax

Global transmit queue WRED ECN tcp profile MaxThreshold value

Integer32r/w

Constraints:
range: 1-100

.1.3.6.1.4.1.20301.2.7.21.8.1.3.6.1.6

qosNewCfgGlobalTrqTcpRate

Global transmit queue WRED ECN tcp profile DropRate value

Integer32r/w

Constraints:
range: 1-100

.1.3.6.1.4.1.20301.2.7.21.8.1.3.6.1.7

qosNewCfgGlobalTrqWredState

This is for turning on/off WRED per global transmit queue

Enumerationr/w

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.20301.2.7.21.8.1.3.6.1.8

aclCurCfgTable

table

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1 · 1 row entry · 45 columns

Open in standard view

The table of current ACL configuration.

aclCurCfgEntry entry .1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1

Current information about a particular ACL configuration entry.

Indexes

aclCurCfgIndex

Column Syntax OID

aclCurCfgIndex

The index associated with this ACL entry.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.1

aclCurCfgGroup

The index of the ACL group to which this ACL entry is a member of.
A value of zero means the ACL is not a member of any group.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.3

aclCurCfgFilterAction

The action to be performed on a packet that matches the filter
settings of this ACL entry.

Enumeration

Enumerated Values:

0	none
1	permit
2	deny
3	setprio

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.4

aclCurCfgFilterActionSetPrio

The value to be used when the action to be performed is setprio
for this ACL entry.

Enumeration

Enumerated Values:

0	none
1	prio0
2	prio1
3	prio2
4	prio3
5	prio4
6	prio5
7	prio6
8	prio7

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.5

aclCurCfgEthFmt

The packet ethernet format to be filtered.

Enumeration

Enumerated Values:

0	none
1	ethernet2
2	snap
3	llc

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.6

aclCurCfgTagFmt

The packet tag format to be filtered.

Enumeration

Enumerated Values:

1	disabled
2	any
3	untagged
4	tagged

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.7

aclCurCfgIPFmt

The packet IP format to be filtered.

Enumeration

Enumerated Values:

1	none
2	ipv4
3	ipv6

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.8

aclCurCfgSrcMACAddress

The source MAC address to be filtered.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.9

aclCurCfgSrcMACMask

The address mask applied to aclCurCfgSrcMACAddress for filtering.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.10

aclCurCfgDstMACAddress

The destination MAC address to be filtered.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.11

aclCurCfgDstMACMask

The address mask applied to aclCurCfgDstMACAddress for filtering.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.12

aclCurCfgEthernetTypeName

The Ethernet type to be filtered. If the value of this
object is other(7), the value of aclNewCfgEthernetTypeValue
indicates the ethernet type that will be filtered.

Enumeration

Enumerated Values:

0	none
1	arp
2	ipv4
3	ipv6
4	mpls
5	rarp
6	any
7	other

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.13

aclCurCfgEthernetTypeValue

The Ethernet type value to be filtered. The value of this
object is equivalent to the value of aclNewCfgEthernetTypeName
except when the value of aclNewCfgEthernetTypeName is other(7),
which can be any user-defined valu…

Integer32

Constraints:
range: 1536-65535

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.14

aclCurCfgVLanId

The virtual LAN identifier to be filtered.

Integer32

Constraints:
range: 0-4095

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.15

aclCurCfgVLanMask

The mask applied to aclCurCfgVLanId for filtering.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.16

aclCurCfg8021pPriority

The 802.1p priority to be filtered.

Enumeration

Enumerated Values:

0	none
1	priority0
2	priority1
3	priority2
4	priority3
5	priority4
6	priority5
7	priority6
8	priority7

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.17

aclCurCfgTypeOfService

The type of service to be filtered.
'none' for not initialised, within the
range 0-255

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.18

aclCurCfgProtocol

The protocol to be filtered.
'none' for not initialised, within the
range 0-255

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.19

aclCurCfgSrcIPAddress

The source IP address to be filtered.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.20

aclCurCfgSrcIPMask

The address mask applied to aclCurCfgSrcIPAddress for filtering.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.21

aclCurCfgDstIPAddress

The destination IP address to be filtered.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.22

aclCurCfgDstIPMask

The address mask applied to aclCurCfgDstIPAddress for filtering.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.23

aclCurCfgSrcPort

The source TCP/UDP port number to be filtered.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.24

aclCurCfgSrcPortMask

The mask applied to aclCurCfgSrcPort for filtering.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.25

aclCurCfgDstPort

The destination TCP/UDP port number to be filtered.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.26

aclCurCfgDstPortMask

The mask applied to aclCurCfgDstPort for filtering.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.27

aclCurCfgTCPFlags

The TCP flags to be filtered.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)

where:
- reserved1 - 0;
-…

Bits

Enumerated Values:

0	reserved1
1	reserved2
2	tcpURG
3	tcpACK
4	tcpPSH
5	tcpRST
6	tcpSYN
7	tcpFIN

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.28

aclCurCfgEgressPortIndexes

The port list in the ACL configured for egress filtering.
The ports are presented in bitmap format, as follows:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ port 9
…

OctetString

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.29

aclCurCfgStatistics

Whether statistics collection for this ACL is enabled or not.

Enumeration

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.30

aclCurCfgTCPFlagsMask

The TCP flags mask.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)

where:
- reserved1 - 0;
- reserved2…

Bits

Enumerated Values:

0	reserved1
1	reserved2
2	tcpURG
3	tcpACK
4	tcpPSH
5	tcpRST
6	tcpSYN
7	tcpFIN

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.39

aclCurCfgMeterAction

Meter Action for this ACL.

Enumeration

Enumerated Values:

0	unconfigured
1	outdrop
2	outpass

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.41

aclCurCfgMeterEnable

Meter state for this ACL.

Enumeration

Enumerated Values:

0	enabled
1	disabled

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.42

aclCurCfgKbitsSec

The commited rate of meter associated with this ACL entry.

Unsigned32

Constraints:
range: 64-40000000

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.43

aclCurCfgKbitsBurst

The maxmium burst sizeof meter associated with this ACL entry.

Enumeration

Enumerated Values:

32	kbits32
64	kbits64
128	kbits128
256	kbits256
512	kbits512
1024	kbits1024
2048	kbits2048
4096	kbits4096

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.44

aclCurCfgUser

Set user defined priority for this ACL.

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.45

aclCurCfgInprofDscp

Set in profile pkts DSCP value.

Integer32

Constraints:
range: 0-63

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.46

aclCurCfgTos

To enable/disable setting pkts based on TOS bits.

Enumeration

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.47

aclCurCfgOutprofDscp

Set out profile pkts DSCP value.

Integer32

Constraints:
range: 0-63

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.48

aclCurCfgUserEnable

Set update method for this ACL.

Enumeration

Enumerated Values:

0	disabled
1	userdefined

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.49

aclCurCfgInprofDscpEnable

Whether in profile update DSCP for this ACL is enabled or not.

Enumeration

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.50

aclCurCfgOutprofDscpEnable

Whether out profile update DSCP for this ACL is enabled or not.

Enumeration

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.51

aclCurCfgMirrorPortIndex

Set port in the ACL for mirroring.
n > 0 - the represented port is configured for mirroring.
0 - the represented port is not configured for mirroring.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.74

aclCurCfgLog

Whether log for this ACL is enabled or not.

Enumeration

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.81

aclCurCfgMirrorPortAlias

The mirror port alias.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.91

aclCurCfgEgressPortAliases

The egress port alias.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.92

aclNewCfgTable

table

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2 · 1 row entry · 59 columns

Open in standard view

The table of new ACL configuration.

aclNewCfgEntry entry .1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1

New information about a particular ACL configuration.

Indexes

aclNewCfgIndex

Column Syntax OID

aclNewCfgIndex

The index associated with this ACL entry.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.1

aclNewCfgGroup

The index of the ACL group to which this ACL entry is a member of.
A value of zero means the ACL is not a member of any group.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.3

aclNewCfgFilterAction

The action to be performed on a packet that matches the filter
settings of this ACL entry.

Enumerationr/w

Enumerated Values:

0	none
1	permit
2	deny
3	setprio

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.4

aclNewCfgFilterActionSetPrio

The COS queue to be used when the action for this ACL entry is
set to setprio.

Enumerationr/w

Enumerated Values:

0	none
1	prio0
2	prio1
3	prio2
4	prio3
5	prio4
6	prio5
7	prio6
8	prio7

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.5

aclNewCfgEthFmt

The packet ethernet format to be filtered.

Enumerationr/w

Enumerated Values:

0	none
1	ethernet2
2	snap
3	llc

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.6

aclNewCfgTagFmt

The packet tagging format to be filtered.

Enumerationr/w

Enumerated Values:

1	disabled
2	any
3	none
4	tagged

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.7

aclNewCfgIPFmt

The packet IP format to be filtered.

Enumerationr/w

Enumerated Values:

1	none
2	ipv4
3	ipv6

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.8

aclNewCfgSrcMACAddress

The source MAC address to be filtered. Whenever this object is
set to a nonzero value, the aclNewCfgSrcMACMask object, if not
yet set, will be automatically set to ff:ff:ff:ff:ff:ff.

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.9

aclNewCfgSrcMACMask

The address mask to be applied to aclNewCfgSrcMACAddress
for filtering.

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.10

aclNewCfgDstMACAddress

The destination MAC address to be filtered. Whenever this object
is set to a nonzero value, the aclNewCfgDstMACMask object, if not
yet set, will be automatically set to ff:ff:ff:ff:ff:ff.

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.11

aclNewCfgDstMACMask

The address mask to be applied to aclNewCfgDstMACAddress
for filtering.

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.12

aclNewCfgEthernetTypeName

The Ethernet type to be filtered. If the value of this
object is other(7), the value of aclNewCfgEthernetTypeValue
indicates the ethernet type that will be filtered. If this
object is set to a value other than other(7),…

Enumerationr/w

Enumerated Values:

0	none
1	arp
2	ipv4
3	ipv6
4	mpls
5	rarp
6	any
7	other

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.13

aclNewCfgEthernetTypeValue

Integer32r/w

Constraints:
range: 1536-65535

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.14

aclNewCfgVLanId

The virtual LAN identifier to be filtered. Whenever this object
is set to a nonzero value, the aclNewCfgVLanMask object, if not
yet set, will be automatically set to 4095 (0xfff). When this
object is set to 0, the Vlan …

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.15

aclNewCfgVLanMask

The mask to be applied to aclNewCfgVLanId for filtering.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.16

aclNewCfg8021pPriority

The 802.1p priority to be filtered.

Enumerationr/w

Enumerated Values:

0	none
1	priority0
2	priority1
3	priority2
4	priority3
5	priority4
6	priority5
7	priority6
8	priority7

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.17

aclNewCfgTypeOfService

The type of service to be filtered.
'none' for not initialised, within the
range 0-255

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.18

aclNewCfgProtocol

The protocol to be filtered.
'none' for not initialised, within the
range 0-255

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.19

aclNewCfgSrcIPAddress

The source IP address to be filtered. Whenever this object is set
to a nonzero value, the aclNewCfgSrcIPMask object, if not yet set,
will be automatically set to 255.255.255.255.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.20

aclNewCfgSrcIPMask

The address mask to be applied to aclNewCfgSrcIPAddress
for filtering.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.21

aclNewCfgDstIPAddress

The destination IP address to be filtered. Whenever this object is set
to a nonzero value, the aclNewCfgDstIPMask object, if not yet set,
will be automatically set to 255.255.255.255.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.22

aclNewCfgDstIPMask

The address mask to be applied to aclNewCfgDstIPAddress for filtering.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.23

aclNewCfgSrcPort

The source TCP/UDP port number to be filtered. Whenever this
object is set if the aclNewCfgSrcPortMask object is not set
will be automatically set to 65535 (0xffff).

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.24

aclNewCfgSrcPortMask

The mask to be applied to aclNewCfgSrcPort for filtering.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.25

aclNewCfgDstPort

The destination TCP/UDP port number to be filtered. Whenever this
object is set the aclNewCfgSrcPortMask object, if not yet set, will
be automatically set to 65535 (0xffff).

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.26

aclNewCfgDstPortMask

The mask to be applied to aclNewCfgDstPort for filtering.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.27

aclNewCfgTCPFlags

The TCP flags to be filtered.
The TCP flags are presented in bitmap format, as follows:
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|___…

Bitsr/w

Enumerated Values:

0	reserved1
1	reserved2
2	tcpURG
3	tcpACK
4	tcpPSH
5	tcpRST
6	tcpSYN
7	tcpFIN

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.28

aclNewCfgEgressPortIndexes

The port list in the ACL configured for egress filtering.
The ports are presented in bitmap format, as follows:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ port 9
…

OctetString

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.29

aclNewCfgStatistics

Whether statistics collection for this ACL is enabled or not.

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.30

aclNewCfgAddEgressPortIndex

The port to be added to the specified ACL for egress filtering.
A value of zero is always returned when this object is read.

PortNumberr/w

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.31

aclNewCfgRemoveEgressPortIndex

The port to be removed from the specified ACL. A value of zero
is always returned when this object is read.

PortNumberr/w

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.32

aclNewCfgDelete

This is an action object to delete an ACL entry. A value of
other(1) is always returned when this object is read.

Enumerationr/w

Enumerated Values:

1	other
2	delete

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.33

aclNewCfgTCPFlagsMask

The TCP flags mask.
The TCP flags are presented in bitmap format, as follows:
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reser…

Bitsr/w

Enumerated Values:

0	reserved1
1	reserved2
2	tcpURG
3	tcpACK
4	tcpPSH
5	tcpRST
6	tcpSYN
7	tcpFIN

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.39

aclNewCfgMeterAction

Meter Action for this ACL.

Enumerationr/w

Enumerated Values:

0	unconfigured
1	outdrop
2	outpass

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.41

aclNewCfgMeterEnable

Meter state for this ACL.

Enumerationr/w

Enumerated Values:

0	enabled
1	disabled

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.42

aclNewCfgKbitsSec

The commited rate of meter associated with this ACL entry.

Unsigned32r/w

Constraints:
range: 64-40000000

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.43

aclNewCfgKbitsBurst

The maximum burst size of the meter associated with this ACL entry.

Enumerationr/w

Enumerated Values:

32	kbits32
64	kbits64
128	kbits128
256	kbits256
512	kbits512
1024	kbits1024
2048	kbits2048
4096	kbits4096

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.44

aclNewCfgUser

Set user defined priority for this ACL.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.45

aclNewCfgInprofDscp

Set in profile pkts DSCP value.

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.46

aclNewCfgTos

To enable/disable setting pkts based on TOS bits.

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.47

aclNewCfgOutprofDscp

Set out profile pkts DSCP value.

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.48

aclNewCfgUserEnable

Set update method for this ACL.

Enumerationr/w

Enumerated Values:

0	disabled
1	userdefined

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.49

aclNewCfgInprofDscpEnable

Whether in profile update DSCP for this ACL is enabled or not.
Only the value disable(0) can be set, causing the in profile
update DSCP to be disabled for this ACL.
The value enable(1) is automatically set when setting …

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.50

aclNewCfgOutprofDscpEnable

Whether out profile update DSCP for this ACL is enabled or not.
Only the value disable(0) can be set, causing the out profile
update DSCP to be disabled for this ACL.
The value enable(1) is automatically set when settin…

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.51

aclNewCfgReset

This is an action object to reset an ACL entry. A value of
other(1) is always returned when this object is read.

Enumerationr/w

Enumerated Values:

1	other
2	reset

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.52

aclNewCfgEthernetReset

This is an action object to reset an ACL Ethernet entry. A value of
other(1) is always returned when this object is read.

Enumerationr/w

Enumerated Values:

1	other
2	reset

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.53

aclNewCfgIpv4Reset

This is an action object to reset an ACL IPV4 entry. A value of
other(1) is always returned when this object is read.

Enumerationr/w

Enumerated Values:

1	other
2	reset

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.54

aclNewCfgTcpudpReset

This is an action object to reset an ACL Tcpudp entry. A value of
other(1) is always returned when this object is read.

Enumerationr/w

Enumerated Values:

1	other
2	reset

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.55

aclNewCfgMeterReset

This is an action object to reset an ACL Meter entry. A value of
other(1) is always returned when this object is read.

Enumerationr/w

Enumerated Values:

1	other
2	reset

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.56

aclNewCfgRemarkReset

This is an action object to reset an ACL Remark entry. A value of
other(1) is always returned when this object is read.

Enumerationr/w

Enumerated Values:

1	other
2	reset

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.57

aclNewCfgRemarkInprofReset

This is an action object to reset an ACL Remark Inprof entry. A value of
other(1) is always returned when this object is read.

Enumerationr/w

Enumerated Values:

1	other
2	reset

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.58

aclNewCfgRemarkOutprofReset

This is an action object to reset an ACL Remark Outprof entry. A value of
other(1) is always returned when this object is read.

Enumerationr/w

Enumerated Values:

1	other
2	reset

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.59

aclNewCfgPktfmtReset

This is an action object to reset an ACL Pktfmt entry. A value of
other(1) is always returned when this object is read.

Enumerationr/w

Enumerated Values:

1	other
2	reset

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.60

aclNewCfgMirrorPortIndex

Set port in the ACL for mirroring.
n > 0 - the represented port is configured for mirroring.
0 - the represented port is not configured for mirroring.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.74

aclNewCfgLog

Whether log for this ACL is enabled or not.

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.81

aclNewCfgMirrorPortAlias

The mirror port alias.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.91

aclNewCfgEgressPortAliases

The egress port alias.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.92

aclNewCfgAddEgressPortAlias

The port to be added using it's alias to the specified ACL for egress filtering.
A value of zero is always returned when this object is read.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.93

aclNewCfgRemoveEgressPortAlias

The port to be removed using it's alias to the specified ACL for egress filtering.
A value of zero is always returned when this object is read.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.94

aclGroupCurCfgTable

table

.1.3.6.1.4.1.20301.2.7.21.9.1.3.1 · 1 row entry · 3 columns

Open in standard view

The table of current ACL Group configuration.

aclGroupCurCfgEntry entry .1.3.6.1.4.1.20301.2.7.21.9.1.3.1.1

Information about a particular ACL configuration.

Indexes

aclGroupCurCfgIndex

Column	Syntax	OID
aclGroupCurCfgIndex The index associated with this ACL Group entry.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.9.1.3.1.1.1`
aclGroupCurCfgMemberAcls The ACL members of this ACL group, presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \| \|\| \|\| \|_ ACL 9 \|\| \|\| \|\| \|\|___ ACL 8 \|\| …	OctetString	`.1.3.6.1.4.1.20301.2.7.21.9.1.3.1.1.2`
aclGroupCurCfgMemberAcl6s The ACL6 members of this ACL group, presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \| \|\| \|\| \|_ ACL6 9 \|\| \|\| \|\| \|\|___ ACL6 8 \|\| \|____ ACL6 7 …	OctetString	`.1.3.6.1.4.1.20301.2.7.21.9.1.3.1.1.9`

aclGroupNewCfgTable

table

.1.3.6.1.4.1.20301.2.7.21.9.1.3.2 · 1 row entry · 8 columns

Open in standard view

The table of new ACL Group configuration.

aclGroupNewCfgEntry entry .1.3.6.1.4.1.20301.2.7.21.9.1.3.2.1

New information about a particular ACL configuration.

Indexes

aclGroupNewCfgIndex

Column Syntax OID

aclGroupNewCfgIndex

The index associated with this ACL Group entry.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.9.1.3.2.1.1

aclGroupNewCfgMemberAcls

The ACL members of this ACL group, presented in bitmap
format, as follows:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ ACL 9
|| ||
|| ||___ ACL 8
|| …

OctetString

.1.3.6.1.4.1.20301.2.7.21.9.1.3.2.1.2

aclGroupNewCfgAddAcl

The index of the ACL entry to be added into this ACL group.
A successful set operation on this object will also set the bit
corresponding to the ACL entry in the aclGroupNewCfgMemberAcls
bitmap. A value of zero is alway…

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.9.1.3.2.1.4

aclGroupNewCfgRemoveAcl

The index of the ACL entry to be removed from this ACL group.
A successful set operation on this object will unset the bit
corresponding to the ACL entry in the aclGroupNewCfgMemberAcls
bitmap. A value of zero is always…

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.9.1.3.2.1.5

aclGroupNewCfgDelete

This is an action object to delete an ACL group. A value of other(1)
is always returned when this object is read.

Enumerationr/w

Enumerated Values:

1	other
2	delete

.1.3.6.1.4.1.20301.2.7.21.9.1.3.2.1.8

aclGroupNewCfgMemberAcl6s

The ACL6 members of this ACL group, presented in bitmap
format, as follows:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ ACL6 9
|| ||
|| ||___ ACL6 8
|| |____ ACL6 7
|| . .…

OctetString

.1.3.6.1.4.1.20301.2.7.21.9.1.3.2.1.9

aclGroupNewCfgAddAcl6

The index of the ACL6 entry to be added into this ACL group.
A successful set operation on this object will also set the bit
corresponding to the ACL6 entry in the aclGroupNewCfgMemberAcl6s
bitmap. A value of zero is al…

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.9.1.3.2.1.10

aclGroupNewCfgRemoveAcl6

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.9.1.3.2.1.11

aclCurCfgPortTable

table

.1.3.6.1.4.1.20301.2.7.21.9.1.4.1 · 1 row entry · 5 columns

Open in standard view

The table of port acl groups configuration.

aclCurCfgPortTableEntry entry .1.3.6.1.4.1.20301.2.7.21.9.1.4.1.1

Information about a particular port acl configuration.

Indexes

aclCurCfgPortIndex

Column	Syntax	OID
aclCurCfgPortIndex The identifier of a particular port. This is also index to the entLogicalTable of Entity MIB.	PortNumber Textual Convention: PortNumber `Unsigned32`	`.1.3.6.1.4.1.20301.2.7.21.9.1.4.1.1.1`
aclCurCfgPortAclBmap The acls applied to the port. The acls are presented in bitmap format. This string displays acl number from 1 to 896. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx …	OctetString Constraints: `range: 0-512`	`.1.3.6.1.4.1.20301.2.7.21.9.1.4.1.1.2`
aclCurCfgPortAclGrpBmap The acl groups applied to the port. The acls are presented in bitmap format. This string displays acl number from 1 to 896. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... …	OctetString Constraints: `range: 0-512`	`.1.3.6.1.4.1.20301.2.7.21.9.1.4.1.1.4`
aclCurCfgPortAcl6Bmap The acls applied to the port. The acls are presented in bitmap format. This string displays acl number from 1 to 128. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx …	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.20301.2.7.21.9.1.4.1.1.13`
aclCurCfgPortAlias The alias of a particular port.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.9.1.4.1.1.14`

aclNewCfgPortTable

table

.1.3.6.1.4.1.20301.2.7.21.9.1.4.2 · 1 row entry · 11 columns

Open in standard view

The table of port acl configuration.

aclNewCfgPortTableEntry entry .1.3.6.1.4.1.20301.2.7.21.9.1.4.2.1

Information about a particular port acl groups configuration.

Indexes

aclNewCfgPortIndex

Column	Syntax	OID
aclNewCfgPortIndex The identifier of a particular port. This is also index to the entLogicalTable of Entity MIB.	PortNumber Textual Convention: PortNumber `Unsigned32`	`.1.3.6.1.4.1.20301.2.7.21.9.1.4.2.1.1`
aclNewCfgPortAddAcl The acl to be added to the specified port. A '0' value is returned when read.	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.9.1.4.2.1.2`
aclNewCfgPortAddAclGrp The acl group to be added to the specified port. A '0' value is returned when read.	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.9.1.4.2.1.4`
aclNewCfgPortRemoveAcl The acl to be removed from the specified port. A '0' value is returned when read.	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.9.1.4.2.1.5`
aclNewCfgPortRemoveAclGrp The acl group to be removed from the specified port. A '0' value is returned when read.	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.9.1.4.2.1.7`
aclNewCfgPortAclBmap The acls applied to the port. The acls are presented in bitmap format. This string displays acl number from 1 to 896. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| …	OctetString Constraints: `range: 0-512`	`.1.3.6.1.4.1.20301.2.7.21.9.1.4.2.1.8`
aclNewCfgPortAclGrpBmap The acl groups applied to the port. The acl groups are presented in bitmap format. This string displays group number from 1 to 4096. in receiving order: OCTET 1 OCTET 2 ..... xxx…	OctetString Constraints: `range: 0-512`	`.1.3.6.1.4.1.20301.2.7.21.9.1.4.2.1.10`
aclNewCfgPortAddAcl6 The acl6 to be added to the specified port. A '0' value is returned when read.	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.9.1.4.2.1.11`
aclNewCfgPortRemoveAcl6 The acl6 to be removed from the specified port. A '0' value is returned when read.	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.9.1.4.2.1.12`
aclNewCfgPortAcl6Bmap The acl6s applied to the port. The acl6s are presented in bitmap format. This string displays acl number from 1 to 128. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| …	OctetString Constraints: `range: 0-512`	`.1.3.6.1.4.1.20301.2.7.21.9.1.4.2.1.13`
aclNewCfgPortAlias The alias of a particular port.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.9.1.4.2.1.14`

acl6CurCfgTable

table

.1.3.6.1.4.1.20301.2.7.21.9.1.5.1 · 1 row entry · 32 columns

Open in standard view

The table of current ACL6 configuration.

acl6CurCfgEntry entry .1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1

Current information about a particular ACL6 configuration entry.

Indexes

acl6CurCfgIndex

Column Syntax OID

acl6CurCfgIndex

The index associated with this ACL6 entry.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.1

acl6CurCfgGroup

The index of the ACL group to which this ACL6 entry is a member of.
A value of zero means the ACL6 is not a member of any group.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.2

acl6CurCfgFilterAction

The action to be performed on a packet that matches the filter
settings of this ACL6 entry.

Enumeration

Enumerated Values:

0	none
1	permit
2	deny
3	setprio

.1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.3

acl6CurCfgFilterActionSetPrio

The value to be used when the action to be performed is setprio
for this ACL6 entry.

Enumeration

Enumerated Values:

0	none
1	prio0
2	prio1
3	prio2
4	prio3
5	prio4
6	prio5
7	prio6
8	prio7

.1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.4

acl6CurCfgSrcIPv6Address

The source IPv6 address to be filtered.
Address should be 4-byte hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxx…

OctetString

Constraints:
range: 0-40

.1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.5

acl6CurCfgSrcIPv6PrefixLen

The IPv6 prefix applied to acl6CurCfgSrcIPv6PrefixLen for filtering.

Integer32

Constraints:
range: 1-128

.1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.6

acl6CurCfgDstIPv6Address

The destination IPv6 address to be filtered.
Address should be 4-byte hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx…

OctetString

Constraints:
range: 0-40

.1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.7

acl6CurCfgDstIPv6PrefixLen

The IPv6 prefix applied to acl6CurCfgDstIPv6PrefixLen for filtering.

Integer32

Constraints:
range: 1-128

.1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.8

acl6CurCfgIPv6FlowLabel

The IPv6 FlowLabel to be filtered.
'none' for not initialised, within the
range 0-1048575

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.9

acl6CurCfgIPv6TrafficClass

The IPv6 Traffic Class to be filtered.
'none' for not initialised, within the
range 0-255

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.10

acl6CurCfgIPv6NextHeader

The IPv6 next header to be filtered.
'none' for not initialised, within the
range 0-255

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.11

acl6CurCfgSrcPort

The source TCP/UDP port number to be filtered.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.12

acl6CurCfgSrcPortMask

The mask applied to acl6CurCfgSrcPort for filtering.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.13

acl6CurCfgDstPort

The destination TCP/UDP port number to be filtered.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.14

acl6CurCfgDstPortMask

The mask applied to acl6CurCfgDstPort for filtering.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.15

acl6CurCfgTCPFlags

Bits

Enumerated Values:

0	reserved1
1	reserved2
2	tcpURG
3	tcpACK
4	tcpPSH
5	tcpRST
6	tcpSYN
7	tcpFIN

.1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.16

acl6CurCfgTCPFlagsMask

Bits

Enumerated Values:

0	reserved1
1	reserved2
2	tcpURG
3	tcpACK
4	tcpPSH
5	tcpRST
6	tcpSYN
7	tcpFIN

.1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.17

acl6CurCfgEgressPortIndexes

The port list in the ACL6 configured for egress filtering.
The ports are presented in bitmap format, as follows:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ port 9
…

OctetString

.1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.18

acl6CurCfgStatistics

Whether statistics collection for this ACL6 is enabled or not.

Enumeration

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.19

acl6CurCfgUser

Set user defined priority for this ACL6.

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.20

acl6CurCfgInprofDscp

Set in profile pkts DSCP value.

Integer32

Constraints:
range: 0-63

.1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.21

acl6CurCfgTos

To enable/disable setting pkts based on TOS bits.

Enumeration

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.22

acl6CurCfgUserEnable

Set update method for this ACL6.

Enumeration

Enumerated Values:

0	disabled
1	userdefined

.1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.24

acl6CurCfgInprofDscpEnable

Whether in profile update DSCP for this ACL6 is enabled or not.

Enumeration

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.25

acl6CurCfgLog

Whether log for this ACL is enabled or not.

Enumeration

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.26

acl6CurCfgMeterAction

Meter Action for this ACL.

Enumeration

Enumerated Values:

0	unconfigured
1	outdrop
2	outpass

.1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.28

acl6CurCfgMeterEnable

Meter state for this ACL.

Enumeration

Enumerated Values:

0	enabled
1	disabled

.1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.29

acl6CurCfgKbitsSec

The commited rate of meter associated with this ACL entry.

Unsigned32

Constraints:
range: 64-40000000

.1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.30

acl6CurCfgKbitsBurst

The maxmium burst sizeof meter associated with this ACL entry.

Enumeration

Enumerated Values:

32	kbits32
64	kbits64
128	kbits128
256	kbits256
512	kbits512
1024	kbits1024
2048	kbits2048
4096	kbits4096

.1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.31

acl6CurCfgOutprofDscp

Set out profile pkts DSCP value.

Integer32

Constraints:
range: 0-63

.1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.32

acl6CurCfgOutprofDscpEnable

Whether out profile update DSCP for this ACL is enabled or not.

Enumeration

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.33

acl6CurCfgEgressPortAliases

The port alias in the ACL6 configured for egress filtering.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.34

acl6NewCfgTable

table

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2 · 1 row entry · 42 columns

Open in standard view

The table of new ACL6 configuration.

acl6NewCfgEntry entry .1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1

New information about a particular ACL6 configuration.

Indexes

acl6NewCfgIndex

Column Syntax OID

acl6NewCfgIndex

The index associated with this ACL6 entry.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.1

acl6NewCfgGroup

The index of the ACL group to which this ACL6 entry is a member of.
A value of zero means the ACL6 is not a member of any group.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.2

acl6NewCfgFilterAction

The action to be performed on a packet that matches the filter
settings of this ACL6 entry.

Enumerationr/w

Enumerated Values:

0	none
1	permit
2	deny
3	setprio

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.3

acl6NewCfgFilterActionSetPrio

The COS queue to be used when the action for this ACL6 entry is
set to setprio.

Enumerationr/w

Enumerated Values:

0	none
1	prio0
2	prio1
3	prio2
4	prio3
5	prio4
6	prio5
7	prio6
8	prio7

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.4

acl6NewCfgSrcIPv6Address

OctetStringr/w

Constraints:
range: 0-40

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.5

acl6NewCfgSrcIPv6PrefixLen

The IPv6 prefix applied to acl6CurCfgSrcIPv6PrefixLen for filtering.

Integer32r/w

Constraints:
range: 1-128

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.6

acl6NewCfgDstIPv6Address

OctetStringr/w

Constraints:
range: 0-40

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.7

acl6NewCfgDstIPv6PrefixLen

The IPv6 prefix applied to acl6CurCfgDstIPv6PrefixLen for filtering.

Integer32r/w

Constraints:
range: 1-128

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.8

acl6NewCfgIPv6FlowLabel

The IPv6 flow label to be filtered.
'none' for not initialised, within the
range 0-1048575

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.9

acl6NewCfgIPv6TrafficClass

The IPv6 traffic class to be filtered.
'none' for not initialised, within the
range 0-255

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.10

acl6NewCfgIPv6NextHeader

The IPv6 next header to be filtered.
'none' for not initialised, within the
range 0-255

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.11

acl6NewCfgSrcPort

The source TCP/UDP port number to be filtered.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.12

acl6NewCfgSrcPortMask

The mask applied to acl6CurCfgSrcPort for filtering.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.13

acl6NewCfgDstPort

The destination TCP/UDP port number to be filtered.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.14

acl6NewCfgDstPortMask

The mask applied to acl6CurCfgDstPort for filtering.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.15

acl6NewCfgTCPFlags

Bitsr/w

Enumerated Values:

0	reserved1
1	reserved2
2	tcpURG
3	tcpACK
4	tcpPSH
5	tcpRST
6	tcpSYN
7	tcpFIN

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.16

acl6NewCfgTCPFlagsMask

Bitsr/w

Enumerated Values:

0	reserved1
1	reserved2
2	tcpURG
3	tcpACK
4	tcpPSH
5	tcpRST
6	tcpSYN
7	tcpFIN

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.17

acl6NewCfgEgressPortIndexes

The port list in the ACL6 configured for egress filtering.
The ports are presented in bitmap format, as follows:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ port 9
…

OctetString

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.18

acl6NewCfgStatistics

Whether statistics collection for this ACL6 is enabled or not.

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.19

acl6NewCfgAddEgressPortIndex

The port to be added to the specified ACL6 for egress filtering.
A value of zero is always returned when this object is read.

PortNumberr/w

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.20

acl6NewCfgRemoveEgressPortIndex

The port to be removed from the specified ACL6. A value of zero
is always returned when this object is read.

PortNumberr/w

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.21

acl6NewCfgDelete

This is an action object to delete an ACL6 entry. A value of
other(1) is always returned when this object is read.

Enumerationr/w

Enumerated Values:

1	other
2	delete

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.22

acl6NewCfgUser

Set user defined priority for this ACL6.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.23

acl6NewCfgInprofDscp

Set in profile pkts DSCP value.

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.24

acl6NewCfgTos

To enable/disable setting pkts based on TOS bits.

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.25

acl6NewCfgUserEnable

Set update method for this ACL6.

Enumerationr/w

Enumerated Values:

0	disabled
1	userdefined

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.27

acl6NewCfgInprofDscpEnable

Whether in profile update DSCP for this ACL6 is enabled or not.
Only the value disable(0) can be set, causing the in profile
update DSCP to be disabled for this ACL6.
The value enable(1) is automatically set when settin…

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.28

acl6NewCfgIPv6Reset

This is an action object to reset an ACL IPV6 entry. A value of
other(1) is always returned when this object is read.

Enumerationr/w

Enumerated Values:

1	other
2	reset

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.30

acl6NewCfgTcpudpReset

This is an action object to reset an ACL6 Tcpudp entry. A value of
other(1) is always returned when this object is read.

Enumerationr/w

Enumerated Values:

1	other
2	reset

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.31

acl6NewCfgRemarkInprofReset

This is an action object to reset an ACL Remark Inprof entry. A value of
other(1) is always returned when this object is read.

Enumerationr/w

Enumerated Values:

1	other
2	reset

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.32

acl6NewCfgLog

Whether log for this ACL is enabled or not.

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.33

acl6NewCfgMeterAction

Meter Action for this ACL.

Enumerationr/w

Enumerated Values:

0	unconfigured
1	outdrop
2	outpass

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.35

acl6NewCfgMeterEnable

Meter state for this ACL.

Enumerationr/w

Enumerated Values:

0	enabled
1	disabled

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.36

acl6NewCfgKbitsSec

The commited rate of meter associated with this ACL entry.

Unsigned32r/w

Constraints:
range: 64-40000000

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.37

acl6NewCfgKbitsBurst

The maximum burst size of the meter associated with this ACL entry.

Enumerationr/w

Enumerated Values:

32	kbits32
64	kbits64
128	kbits128
256	kbits256
512	kbits512
1024	kbits1024
2048	kbits2048
4096	kbits4096

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.38

acl6NewCfgMeterReset

This is an action object to reset an ACL6 Meter entry. A value of
other(1) is always returned when this object is read.

Enumerationr/w

Enumerated Values:

1	other
2	reset

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.39

acl6NewCfgOutprofDscp

Set out profile pkts DSCP value.

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.40

acl6NewCfgOutprofDscpEnable

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.41

acl6NewCfgRemarkOutprofReset

This is an action object to reset an ACL Remark Outprof entry. A value of
other(1) is always returned when this object is read.

Enumerationr/w

Enumerated Values:

1	other
2	reset

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.42

acl6NewCfgAddEgressPortAlias

The port alias to be added to the specified ACL6 for egress filtering.
A value of zero is always returned when this object is read.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.43

acl6NewCfgRemoveEgressPortAlias

The port alias to be removed from the specified ACL6. A value of zero
is always returned when this object is read.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.44

acl6NewCfgEgressPortAliases

The port alias in the ACL6 configured for egress filtering.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.45

vmapCurCfgTable

table

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1 · 1 row entry · 41 columns

Open in standard view

The table of current VMAP configuration.

vmapCurCfgEntry entry .1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1

Current information about a particular VMAP configuration entry.

Indexes

vmapCurCfgIndex

Column Syntax OID

vmapCurCfgIndex

The index associated with this VMAP entry.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.1

vmapCurCfgFilterAction

The action to be performed on a packet that matches the filter
settings of this VMAP entry.

Enumeration

Enumerated Values:

0	none
1	permit
2	deny
3	setprio

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.2

vmapCurCfgFilterActionSetPrio

The value to be used when the action to be performed is setprio
for this VMAP entry.

Enumeration

Enumerated Values:

0	none
1	prio0
2	prio1
3	prio2
4	prio3
5	prio4
6	prio5
7	prio6
8	prio7

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.3

vmapCurCfgEthFmt

The packet ethernet format to be filtered.

Enumeration

Enumerated Values:

0	none
1	ethernet2
2	snap
3	llc

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.4

vmapCurCfgTagFmt

The packet tag format to be filtered.

Enumeration

Enumerated Values:

1	disabled
2	any
3	untagged
4	tagged

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.5

vmapCurCfgIPFmt

The packet IP format to be filtered.

Enumeration

Enumerated Values:

1	none
2	ipv4
3	ipv6

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.6

vmapCurCfgSrcMACAddress

The source MAC address to be filtered.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.7

vmapCurCfgSrcMACMask

The address mask applied to aclCurCfgSrcMACAddress for filtering.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.8

vmapCurCfgDstMACAddress

The destination MAC address to be filtered.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.9

vmapCurCfgDstMACMask

The address mask applied to aclCurCfgDstMACAddress for filtering.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.10

vmapCurCfgEthernetTypeName

The Ethernet type to be filtered. If the value of this
object is other(7), the value of aclNewCfgEthernetTypeValue
indicates the ethernet type that will be filtered.

Enumeration

Enumerated Values:

0	none
1	arp
2	ipv4
3	ipv6
4	mpls
5	rarp
6	any
7	other

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.11

vmapCurCfgEthernetTypeValue

Integer32

Constraints:
range: 1536-65535

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.12

vmapCurCfg8021pPriority

The 802.1p priority to be filtered.

Enumeration

Enumerated Values:

0	none
1	priority0
2	priority1
3	priority2
4	priority3
5	priority4
6	priority5
7	priority6
8	priority7

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.13

vmapCurCfgTypeOfService

The type of service to be filtered.
'none' for not initialised, within the
range 0-255

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.14

vmapCurCfgProtocol

The protocol to be filtered.
'none' for not initialised, within the
range 0-255

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.15

vmapCurCfgSrcIPAddress

The source IP address to be filtered.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.16

vmapCurCfgSrcIPMask

The address mask applied to aclCurCfgSrcIPAddress for filtering.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.17

vmapCurCfgDstIPAddress

The destination IP address to be filtered.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.18

vmapCurCfgDstIPMask

The address mask applied to aclCurCfgDstIPAddress for filtering.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.19

vmapCurCfgSrcPort

The source TCP/UDP port number to be filtered.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.20

vmapCurCfgSrcPortMask

The mask applied to aclCurCfgSrcPort for filtering.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.21

vmapCurCfgDstPort

The destination TCP/UDP port number to be filtered.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.22

vmapCurCfgDstPortMask

The mask applied to aclCurCfgDstPort for filtering.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.23

vmapCurCfgTCPFlags

Bits

Enumerated Values:

0	reserved1
1	reserved2
2	tcpURG
3	tcpACK
4	tcpPSH
5	tcpRST
6	tcpSYN
7	tcpFIN

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.24

vmapCurCfgTCPFlagsMask

Bits

Enumerated Values:

0	reserved1
1	reserved2
2	tcpURG
3	tcpACK
4	tcpPSH
5	tcpRST
6	tcpSYN
7	tcpFIN

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.25

vmapCurCfgEgressPorts

The port list in the VMAP configured for egress filtering.
The ports are presented in bitmap format, as follows:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ port 9
…

OctetString

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.26

vmapCurCfgStatistics

Whether statistics collection for this VMAP is enabled or not.

Enumeration

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.27

vmapCurCfgMeterAction

Meter Action for this VMAP.

Enumeration

Enumerated Values:

0	unconfigured
1	outdrop
2	outpass

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.31

vmapCurCfgMeterEnable

Meter state for this VMAP.

Enumeration

Enumerated Values:

0	enabled
1	disabled

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.32

vmapCurCfgKbitsSec

The commited rate of meter associated with this VMAP entry.

Unsigned32

Constraints:
range: 64-10000000

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.33

vmapCurCfgKbitsBurst

The maxmium burst sizeof meter associated with this VMAP entry.

Enumeration

Enumerated Values:

32	kbits32
64	kbits64
128	kbits128
256	kbits256
512	kbits512
1024	kbits1024
2048	kbits2048
4096	kbits4096

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.34

vmapCurCfgUser

Set user defined priority for this VMAP.

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.35

vmapCurCfgInprofDscp

Set in profile pkts DSCP value.

Integer32

Constraints:
range: 0-63

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.36

vmapCurCfgTos

To enable/disable setting pkts based on TOS bits.

Enumeration

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.37

vmapCurCfgOutprofDscp

Set out profile pkts DSCP value.

Integer32

Constraints:
range: 0-63

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.38

vmapCurCfgUserEnable

Set update method for this VMAP.

Enumeration

Enumerated Values:

0	disabled
1	userdefined

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.39

vmapCurCfgInprofDscpEnable

Whether in profile update DSCP for this VMAP is enabled or not.

Enumeration

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.40

vmapCurCfgOutprofDscpEnable

Whether out profile update DSCP for this VMAP is enabled or not.

Enumeration

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.41

vmapCurCfgMirrorPort

Set port in the VMAP for mirroring.
n > 0 - the represented port is configured for mirroring.
0 - the represented port is not configured for mirroring.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.51

vmapCurCfgEgressPortAlias

The port alias in the VMAP configured for egress filtering

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.53

vmapCurCfgMirrorPortAlias

Set port in the VMAP for mirroring using it's alias.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.54

vmapNewCfgTable

table

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2 · 1 row entry · 55 columns

Open in standard view

The table of new VMAP configuration.

vmapNewCfgEntry entry .1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1

New information about a particular VMAP configuration.

Indexes

vmapNewCfgIndex

Column Syntax OID

vmapNewCfgIndex

The index associated with this VMAP entry.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.1

vmapNewCfgFilterAction

The action to be performed on a packet that matches the filter
settings of this VMAP entry.

Enumerationr/w

Enumerated Values:

0	none
1	permit
2	deny
3	setprio

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.2

vmapNewCfgFilterActionSetPrio

The COS queue to be used when the action for this VMAP entry is
set to setprio.

Enumerationr/w

Enumerated Values:

0	none
1	prio0
2	prio1
3	prio2
4	prio3
5	prio4
6	prio5
7	prio6
8	prio7

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.3

vmapNewCfgEthFmt

The packet ethernet format to be filtered.

Enumerationr/w

Enumerated Values:

0	none
1	ethernet2
2	snap
3	llc

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.4

vmapNewCfgTagFmt

The packet tagging format to be filtered.

Enumerationr/w

Enumerated Values:

1	disabled
2	any
3	none
4	tagged

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.5

vmapNewCfgIPFmt

The packet IP format to be filtered.

Enumerationr/w

Enumerated Values:

1	none
2	ipv4
3	ipv6

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.6

vmapNewCfgSrcMACAddress

The source MAC address to be filtered. Whenever this object is
set to a nonzero value, the aclNewCfgSrcMACMask object, if not
yet set, will be automatically set to ff:ff:ff:ff:ff:ff.

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.7

vmapNewCfgSrcMACMask

The address mask to be applied to aclNewCfgSrcMACAddress
for filtering.

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.8

vmapNewCfgDstMACAddress

The destination MAC address to be filtered. Whenever this object
is set to a nonzero value, the aclNewCfgDstMACMask object, if not
yet set, will be automatically set to ff:ff:ff:ff:ff:ff.

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.9

vmapNewCfgDstMACMask

The address mask to be applied to aclNewCfgDstMACAddress
for filtering.

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.10

vmapNewCfgEthernetTypeName

Enumerationr/w

Enumerated Values:

0	none
1	arp
2	ipv4
3	ipv6
4	mpls
5	rarp
6	any
7	other

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.11

vmapNewCfgEthernetTypeValue

Integer32r/w

Constraints:
range: 1536-65535

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.12

vmapNewCfg8021pPriority

The 802.1p priority to be filtered.

Enumerationr/w

Enumerated Values:

0	none
1	priority0
2	priority1
3	priority2
4	priority3
5	priority4
6	priority5
7	priority6
8	priority7

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.13

vmapNewCfgTypeOfService

The type of service to be filtered.
'none' for not initialised, within the
range 0-255

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.14

vmapNewCfgProtocol

The protocol to be filtered.
'none' for not initialised, within the
range 0-255

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.15

vmapNewCfgSrcIPAddress

The source IP address to be filtered. Whenever this object is set
to a nonzero value, the aclNewCfgSrcIPMask object, if not yet set,
will be automatically set to 255.255.255.255.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.16

vmapNewCfgSrcIPMask

The address mask to be applied to aclNewCfgSrcIPAddress
for filtering.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.17

vmapNewCfgDstIPAddress

The destination IP address to be filtered. Whenever this object is set
to a nonzero value, the aclNewCfgDstIPMask object, if not yet set,
will be automatically set to 255.255.255.255.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.18

vmapNewCfgDstIPMask

The address mask to be applied to aclNewCfgDstIPAddress for filtering.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.19

vmapNewCfgSrcPort

The source TCP/UDP port number to be filtered. Whenever this
object is set if the aclNewCfgSrcPortMask object is not set
will be automatically set to 65535 (0xffff).

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.20

vmapNewCfgSrcPortMask

The mask to be applied to aclNewCfgSrcPort for filtering.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.21

vmapNewCfgDstPort

The destination TCP/UDP port number to be filtered. Whenever this
object is set the aclNewCfgSrcPortMask object, if not yet set, will
be automatically set to 65535 (0xffff).

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.22

vmapNewCfgDstPortMask

The mask to be applied to aclNewCfgDstPort for filtering.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.23

vmapNewCfgTCPFlags

Bitsr/w

Enumerated Values:

0	reserved1
1	reserved2
2	tcpURG
3	tcpACK
4	tcpPSH
5	tcpRST
6	tcpSYN
7	tcpFIN

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.24

vmapNewCfgTCPFlagsMask

Bitsr/w

Enumerated Values:

0	reserved1
1	reserved2
2	tcpURG
3	tcpACK
4	tcpPSH
5	tcpRST
6	tcpSYN
7	tcpFIN

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.25

vmapNewCfgEgressPorts

The port list in the VMAP configured for egress filtering.
The ports are presented in bitmap format, as follows:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ port 9
…

OctetString

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.26

vmapNewCfgStatistics

Whether statistics collection for this VMAP is enabled or not.

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.27

vmapNewCfgAddEgressPort

The port to be added to the specified VMAP for egress filtering.
A value of zero is always returned when this object is read.

PortNumberr/w

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.28

vmapNewCfgRemoveEgressPort

The port to be removed from the specified VMAP. A value of zero
is always returned when this object is read.

PortNumberr/w

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.29

vmapNewCfgDelete

This is an action object to delete an VMAP entry. A value of
other(1) is always returned when this object is read.

Enumerationr/w

Enumerated Values:

1	other
2	delete

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.30

vmapNewCfgMeterAction

Meter Action for this VMAP.

Enumerationr/w

Enumerated Values:

0	unconfigured
1	outdrop
2	outpass

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.31

vmapNewCfgMeterEnable

Meter state for this VMAP.

Enumerationr/w

Enumerated Values:

0	enabled
1	disabled

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.32

vmapNewCfgKbitsSec

The commited rate of meter associated with this VMAP entry.

Unsigned32r/w

Constraints:
range: 64-10000000

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.33

vmapNewCfgKbitsBurst

The maximum burst size of the meter associated with this VMAP entry.

Enumerationr/w

Enumerated Values:

32	kbits32
64	kbits64
128	kbits128
256	kbits256
512	kbits512
1024	kbits1024
2048	kbits2048
4096	kbits4096

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.34

vmapNewCfgUser

Set user defined priority for this VMAP.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.35

vmapNewCfgInprofDscp

Set in profile pkts DSCP value.

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.36

vmapNewCfgTos

To enable/disable setting pkts based on TOS bits.

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.37

vmapNewCfgOutprofDscp

Set out profile pkts DSCP value.

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.38

vmapNewCfgUserEnable

Set update method for this VMAP.

Enumerationr/w

Enumerated Values:

0	disabled
1	userdefined

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.39

vmapNewCfgInprofDscpEnable

Whether in profile update DSCP for this VMAP is enabled or not.
Only the value disable(0) can be set, causing the in profile
update DSCP to be disabled for this VMAP.
The value enable(1) is automatically set when settin…

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.40

vmapNewCfgOutprofDscpEnable

Whether out profile update DSCP for this VMAP is enabled or not.
Only the value disable(0) can be set, causing the out profile
update DSCP to be disabled for this VMAP.
The value enable(1) is automatically set when sett…

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.41

vmapNewCfgReset

This is an action object to reset an VMAP entry. A value of
other(1) is always returned when this object is read.

Enumerationr/w

Enumerated Values:

1	other
2	reset

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.42

vmapNewCfgEthernetReset

This is an action object to reset an VMAP Ethernet entry. A value of
other(1) is always returned when this object is read.

Enumerationr/w

Enumerated Values:

1	other
2	reset

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.43

vmapNewCfgIpv4Reset

This is an action object to reset an VMAP IPV4 entry. A value of
other(1) is always returned when this object is read.

Enumerationr/w

Enumerated Values:

1	other
2	reset

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.44

vmapNewCfgTcpudpReset

This is an action object to reset an VMAP Tcpudp entry. A value of
other(1) is always returned when this object is read.

Enumerationr/w

Enumerated Values:

1	other
2	reset

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.45

vmapNewCfgMeterReset

This is an action object to reset an VMAP Meter entry. A value of
other(1) is always returned when this object is read.

Enumerationr/w

Enumerated Values:

1	other
2	reset

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.46

vmapNewCfgRemarkReset

This is an action object to reset an VMAP Remark entry. A value of
other(1) is always returned when this object is read.

Enumerationr/w

Enumerated Values:

1	other
2	reset

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.47

vmapNewCfgRemarkInprofReset

This is an action object to reset an VMAP Remark Inprof entry. A value of
other(1) is always returned when this object is read.

Enumerationr/w

Enumerated Values:

1	other
2	reset

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.48

vmapNewCfgRemarkOutprofReset

This is an action object to reset an VMAP Remark Outprof entry. A value of
other(1) is always returned when this object is read.

Enumerationr/w

Enumerated Values:

1	other
2	reset

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.49

vmapNewCfgPktfmtReset

This is an action object to reset an VMAP Pktfmt entry. A value of
other(1) is always returned when this object is read.

Enumerationr/w

Enumerated Values:

1	other
2	reset

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.50

vmapNewCfgMirrorPort

Set port in the VMAP for mirroring.
n > 0 - the represented port is configured for mirroring.
0 - the represented port is not configured for mirroring.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.51

vmapNewCfgEgressPortAliases

The port alias in the VMAP configured for egress filtering.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.53

vmapNewCfgMirrorPortAlias

Set port in the VMAP for mirroring using it's alias.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.54

vmapNewCfgAddEgressPortAlias

The port to be added using it's alias to the specified VMAP for egress filtering.
A value of zero is always returned when this object is read.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.55

vmapNewCfgRemoveEgressPortAlias

The port to be removed using it's alias from the specified VMAP. A value of zero
is always returned when this object is read.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.56

vmapVlanCurCfgNonServerPortsTable

table

.1.3.6.1.4.1.20301.2.7.21.9.3.2.1.1.1 · 1 row entry · 2 columns

Open in standard view

The table of the current configuration
of vmaps for the non-server ports of vlans.

vmapVlanCurCfgNonServerPortsTableEntry entry .1.3.6.1.4.1.20301.2.7.21.9.3.2.1.1.1.1

A row in the table of current configuration
of vmaps for the non-server ports of vlans.

Indexes

vmapVlanCurCfgNonServerPortsVlanIdx

Column	Syntax	OID
vmapVlanCurCfgNonServerPortsVlanIdx The vlan id in the table of configured vmaps for the non-server ports of vlan	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.9.3.2.1.1.1.1.1`
vmapVlanCurCfgNonServerPortsVmapBitmap The bitmap of vmaps configured for the non-server ports of the vlan given as arguments. The vmaps are presented in bitmap format in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx .....…	OctetString	`.1.3.6.1.4.1.20301.2.7.21.9.3.2.1.1.1.1.2`

vmapVlanNewCfgNonServerPortsTable

table

.1.3.6.1.4.1.20301.2.7.21.9.3.2.1.1.2 · 1 row entry · 4 columns

Open in standard view

The table of the new configuration
of vmaps for non-server ports of vlans.

vmapVlanNewCfgNonServerPortsTableEntry entry .1.3.6.1.4.1.20301.2.7.21.9.3.2.1.1.2.1

A row in the table of new configuration
of vmaps for the non-server ports of vlans.

Indexes

vmapVlanNewCfgNonServerPortsVlanIdx

Column	Syntax	OID
vmapVlanNewCfgNonServerPortsVlanIdx The vlan id in the table of configured vmaps for the non-server ports of vlan	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.9.3.2.1.1.2.1.1`
vmapVlanNewCfgNonServerPortsVmapBitmap The bitmap of vmaps configured for the non-server ports of the vlan given as arguments. The vmaps are presented in bitmap format in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx .....…	OctetString	`.1.3.6.1.4.1.20301.2.7.21.9.3.2.1.1.2.1.2`
vmapVlanNewCfgNonServerPortsAddVmap Add a new vmap to the non-server ports of the vlan	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.9.3.2.1.1.2.1.3`
vmapVlanNewCfgNonServerPortsRemVmap Remove a vmap from the non-server ports of the vlan	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.9.3.2.1.1.2.1.4`

vmapVlanCurCfgServerPortsTable

table

.1.3.6.1.4.1.20301.2.7.21.9.3.2.1.2.1 · 1 row entry · 2 columns

Open in standard view

The table of the current configuration
of vmaps for server ports of vlans.

vmapVlanCurCfgServerPortsTableEntry entry .1.3.6.1.4.1.20301.2.7.21.9.3.2.1.2.1.1

A row in the table of current configuration
of vmaps for the server ports of vlans.

Indexes

vmapVlanCurCfgServerPortsVlanIdx

Column	Syntax	OID
vmapVlanCurCfgServerPortsVlanIdx The vlan id in the table of configured vmaps for the server ports of vlan	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.9.3.2.1.2.1.1.1`
vmapVlanCurCfgServerPortsVmapBitmap The bitmap of vmaps configured for the server ports of the vlan given as arguments. The vmaps are presented in bitmap format in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... …	OctetString	`.1.3.6.1.4.1.20301.2.7.21.9.3.2.1.2.1.1.2`

vmapVlanNewCfgServerPortsTable

table

.1.3.6.1.4.1.20301.2.7.21.9.3.2.1.2.2 · 1 row entry · 4 columns

Open in standard view

The table of the new configuration
of vmaps for server ports of vlans.

vmapVlanNewCfgServerPortsTableEntry entry .1.3.6.1.4.1.20301.2.7.21.9.3.2.1.2.2.1

A row in the table of new configuration
of vmaps for the server ports of vlans.

Indexes

vmapVlanNewCfgServerPortsVlanIdx

Column	Syntax	OID
vmapVlanNewCfgServerPortsVlanIdx The vlan id in the table of configured vmaps for the server ports of vlan	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.9.3.2.1.2.2.1.1`
vmapVlanNewCfgServerPortsVmapBitmap The bitmap of vmaps configured for the server ports of the vlan given as arguments. The vmaps are presented in bitmap format in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... …	OctetString	`.1.3.6.1.4.1.20301.2.7.21.9.3.2.1.2.2.1.2`
vmapVlanNewCfgServerPortsAddVmap Add a new vmap to the server ports of the vlan	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.9.3.2.1.2.2.1.3`
vmapVlanNewCfgServerPortsRemVmap Remove a vmap from the server ports of the vlan	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.9.3.2.1.2.2.1.4`

vmapVlanCurCfgAllPortsTable

table

.1.3.6.1.4.1.20301.2.7.21.9.3.2.1.3.1 · 1 row entry · 2 columns

Open in standard view

The table of the current configuration
of vmaps for all ports of vlans.

vmapVlanCurCfgAllPortsTableEntry entry .1.3.6.1.4.1.20301.2.7.21.9.3.2.1.3.1.1

A row in the table of current configuration
of vmaps for all ports of vlans.

Indexes

vmapVlanCurCfgAllPortsVlanIdx

Column	Syntax	OID
vmapVlanCurCfgAllPortsVlanIdx The vlan id in the table of configured vmaps for all ports of vlan	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.9.3.2.1.3.1.1.1`
vmapVlanCurCfgAllPortsVmapBitmap The bitmap of vmaps configured for the internal ports of the vlan given as arguments. The vmaps are presented in bitmap format in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... …	OctetString	`.1.3.6.1.4.1.20301.2.7.21.9.3.2.1.3.1.1.2`

vmapVlanNewCfgAllPortsTable

table

.1.3.6.1.4.1.20301.2.7.21.9.3.2.1.3.2 · 1 row entry · 4 columns

Open in standard view

The table of the new configuration
of vmaps for all ports of vlans.

vmapVlanNewCfgAllPortsTableEntry entry .1.3.6.1.4.1.20301.2.7.21.9.3.2.1.3.2.1

A row in the table of new configuration
of vmaps for all ports of vlans.

Indexes

vmapVlanNewCfgAllPortsVlanIdx

Column	Syntax	OID
vmapVlanNewCfgAllPortsVlanIdx The vlan id in the table of configured vmaps for all ports of vlan	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.9.3.2.1.3.2.1.1`
vmapVlanNewCfgAllPortsVmapBitmap The bitmap of vmaps configured for the internal ports of the vlan given as arguments. The vmaps are presented in bitmap format in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... …	OctetString	`.1.3.6.1.4.1.20301.2.7.21.9.3.2.1.3.2.1.2`
vmapVlanNewCfgAllPortsAddVmap Add a new vmap to all ports of the vlan	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.9.3.2.1.3.2.1.3`
vmapVlanNewCfgAllPortsRemVmap Remove a vmap from all vlan ports	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.9.3.2.1.3.2.1.4`

vmapGroupCurCfgNonServerPortsTable

table

.1.3.6.1.4.1.20301.2.7.21.9.3.2.2.1.1 · 1 row entry · 2 columns

Open in standard view

The table of the current configuration
of vmaps for non-server ports of vm groups.

vmapGroupCurCfgNonServerPortsTableEntry entry .1.3.6.1.4.1.20301.2.7.21.9.3.2.2.1.1.1

A row in the table of current configuration
of vmaps for the non-server ports of vm groups.

Indexes

vmapGroupCurCfgNonServerPortsGroupIdx

Column	Syntax	OID
vmapGroupCurCfgNonServerPortsGroupIdx The vm group id in the table of configured vmaps for the non-server ports of vm group	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.9.3.2.2.1.1.1.1`
vmapGroupCurCfgNonServerPortsVmapBitmap The bitmap of vmaps configured for the non-server ports of the vm group given as arguments. The vmaps are presented in bitmap format in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx .…	OctetString	`.1.3.6.1.4.1.20301.2.7.21.9.3.2.2.1.1.1.2`

vmapGroupNewCfgNonServerPortsTable

table

.1.3.6.1.4.1.20301.2.7.21.9.3.2.2.1.2 · 1 row entry · 4 columns

Open in standard view

The table of the new configuration
of vmaps for non-server ports of vm groups.

vmapGroupNewCfgNonServerPortsTableEntry entry .1.3.6.1.4.1.20301.2.7.21.9.3.2.2.1.2.1

A row in the table of new configuration
of vmaps for the non-server ports of vm groups.

Indexes

vmapGroupNewCfgNonServerPortsGroupIdx

Column	Syntax	OID
vmapGroupNewCfgNonServerPortsGroupIdx The vm group id in the table of configured vmaps for the non-server ports of vm group	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.9.3.2.2.1.2.1.1`
vmapGroupNewCfgNonServerPortsVmapBitmap The bitmap of vmaps configured for the non-server ports of the vm group given as arguments. The vmaps are presented in bitmap format in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx .…	OctetString	`.1.3.6.1.4.1.20301.2.7.21.9.3.2.2.1.2.1.2`
vmapGroupNewCfgNonServerPortsAddVmap Add a new vmap to the non-server ports of the vm group	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.9.3.2.2.1.2.1.3`
vmapGroupNewCfgNonServerPortsRemVmap Remove a vmap from the non-server ports of the vm group	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.9.3.2.2.1.2.1.4`

vmapGroupCurCfgServerPortsTable

table

.1.3.6.1.4.1.20301.2.7.21.9.3.2.2.2.1 · 1 row entry · 2 columns

Open in standard view

The table of the current configuration
of vmaps for server ports of vm groups.

vmapGroupCurCfgServerPortsTableEntry entry .1.3.6.1.4.1.20301.2.7.21.9.3.2.2.2.1.1

A row in the table of current configuration
of vmaps for the server ports of vm groups.

Indexes

vmapGroupCurCfgServerPortsGroupIdx

Column	Syntax	OID
vmapGroupCurCfgServerPortsGroupIdx The vm group id in the table of configured vmaps for the server ports of vm group	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.9.3.2.2.2.1.1.1`
vmapGroupCurCfgServerPortsVmapBitmap The bitmap of vmaps configured for the server ports of the vm group given as arguments. The vmaps are presented in bitmap format in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx .....…	OctetString	`.1.3.6.1.4.1.20301.2.7.21.9.3.2.2.2.1.1.2`

vmapGroupNewCfgServerPortsTable

table

.1.3.6.1.4.1.20301.2.7.21.9.3.2.2.2.2 · 1 row entry · 4 columns

Open in standard view

The table of the new configuration
of vmaps for server ports of vm groups.

vmapGroupNewCfgServerPortsTableEntry entry .1.3.6.1.4.1.20301.2.7.21.9.3.2.2.2.2.1

A row in the table of new configuration
of vmaps for the server ports of vm groups.

Indexes

vmapGroupNewCfgServerPortsGroupIdx

Column	Syntax	OID
vmapGroupNewCfgServerPortsGroupIdx The vm group id in the table of configured vmaps for the server ports of vm group	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.9.3.2.2.2.2.1.1`
vmapGroupNewCfgServerPortsVmapBitmap The bitmap of vmaps configured for the server ports of the vm group given as arguments. The vmaps are presented in bitmap format in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx .....…	OctetString	`.1.3.6.1.4.1.20301.2.7.21.9.3.2.2.2.2.1.2`
vmapGroupNewCfgServerPortsAddVmap Add a new vmap to the server ports of the vm group	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.9.3.2.2.2.2.1.3`
vmapGroupNewCfgServerPortsRemVmap Remove a vmap from the server ports of the vm group	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.9.3.2.2.2.2.1.4`

vmapGroupCurCfgAllPortsTable

table

.1.3.6.1.4.1.20301.2.7.21.9.3.2.2.3.1 · 1 row entry · 2 columns

Open in standard view

The table of the current configuration
of vmaps for all ports of vm groups.

vmapGroupCurCfgAllPortsTableEntry entry .1.3.6.1.4.1.20301.2.7.21.9.3.2.2.3.1.1

A row in the table of current configuration
of vmaps for all ports of vm groups.

Indexes

vmapGroupCurCfgAllPortsGroupIdx

Column	Syntax	OID
vmapGroupCurCfgAllPortsGroupIdx The vm group id in the table of configured vmaps for all ports of vm group	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.9.3.2.2.3.1.1.1`
vmapGroupCurCfgAllPortsVmapBitmap The bitmap of vmaps configured for the internal ports of the vm group given as arguments. The vmaps are presented in bitmap format in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ...…	OctetString	`.1.3.6.1.4.1.20301.2.7.21.9.3.2.2.3.1.1.2`

vmapGroupNewCfgAllPortsTable

table

.1.3.6.1.4.1.20301.2.7.21.9.3.2.2.3.2 · 1 row entry · 4 columns

Open in standard view

The table of the new configuration
of vmaps for all ports of vm groups.

vmapGroupNewCfgAllPortsTableEntry entry .1.3.6.1.4.1.20301.2.7.21.9.3.2.2.3.2.1

A row in the table of new configuration
of vmaps for all ports of vm groups.

Indexes

vmapGroupNewCfgAllPortsGroupIdx

Column	Syntax	OID
vmapGroupNewCfgAllPortsGroupIdx The vm group id in the table of configured vmaps for all ports of vm group	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.9.3.2.2.3.2.1.1`
vmapGroupNewCfgAllPortsVmapBitmap The bitmap of vmaps configured for the internal ports of the vm group given as arguments. The vmaps are presented in bitmap format in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ...…	OctetString	`.1.3.6.1.4.1.20301.2.7.21.9.3.2.2.3.2.1.2`
vmapGroupNewCfgAllPortsAddVmap Add a new vmap to all ports of the vm group	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.9.3.2.2.3.2.1.3`
vmapGroupNewCfgAllPortsRemVmap Remove a vmap from all vm group ports	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.9.3.2.2.3.2.1.4`

switchNumCurCfgTable

table

.1.3.6.1.4.1.20301.2.7.21.12.1.1.1 · 1 row entry · 5 columns

Open in standard view

The table of the current configuration block for the switch numbers

switchNumCurCfgEntry entry .1.3.6.1.4.1.20301.2.7.21.12.1.1.1.1

A row in the table of the current configuration block for the switch
numbers

Indexes

switchNumberCurCfg

Column	Syntax	OID
switchNumberCurCfg The configured switch number.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.12.1.1.1.1.1`
switchUUIDCurCfg The UUID of the chassis the embedded switch is in. An empty string is returned for Top Of Rack switches.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.20301.2.7.21.12.1.1.1.1.2`
switchBayCurCfg The chassis bay number the embedded switch is in. 0 is returned for Top Of Rack switches.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.12.1.1.1.1.3`
switchMACCurCfg The MAC address for the switch number.	SNMPv2-TCPhysAddress Textual Convention: SNMPv2-TCPhysAddress `OctetString`	`.1.3.6.1.4.1.20301.2.7.21.12.1.1.1.1.4`
switchDescrCurCfg A user-defined description for the switch.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.12.1.1.1.1.5`

switchNumNewCfgTable

table

.1.3.6.1.4.1.20301.2.7.21.12.1.1.2 · 1 row entry · 7 columns

Open in standard view

The table of the new configuration block for the switch numbers

switchNumNewCfgEntry entry .1.3.6.1.4.1.20301.2.7.21.12.1.1.2.1

A row in the table of the new configuration block for the switch
numbers

Indexes

switchNumberNewCfg

Column Syntax OID

switchNumberNewCfg

The configured switch number.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.12.1.1.2.1.1

switchUUIDNewCfg

The UUID of the chassis the embedded switch is in.
An empty string is returned for Top Of Rack switches.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.20301.2.7.21.12.1.1.2.1.2

switchBayNewCfg

The chassis bay number the embedded switch is in.
0 is returned for Top Of Rack switches.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.12.1.1.2.1.3

switchBindToAttachedNewCfg

When written, binds the switch number entry to an attached switch;
when read, 0 is returned.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.12.1.1.2.1.4

switchDeleteNewCfg

When setting delete(1), the switch number entry is deleted;
when read, other(2) is returned.

Enumerationr/w

Enumerated Values:

1	delete
2	other

.1.3.6.1.4.1.20301.2.7.21.12.1.1.2.1.5

switchMACNewCfg

The MAC address for the switch number.

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.20301.2.7.21.12.1.1.2.1.6

switchDescrNewCfg

A user-defined description for the switch

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.12.1.1.2.1.7

configuredSwitchesTable

table

.1.3.6.1.4.1.20301.2.7.21.12.3.3.3 · 1 row entry · 6 columns

Open in standard view

The table of the configured switches in fabric

configuredSwitchesEntry entry .1.3.6.1.4.1.20301.2.7.21.12.3.3.3.1

Information about a configured switch

Indexes

confSwitchNumber

Column Syntax OID

confSwitchNumber

The number of the configured switch.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.12.3.3.3.1.1

confSwitchUUID

The UUID of the configured switch.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.12.3.3.3.1.2

confSwitchBay

The number of the bay where the configured switch is located;
0 if the configured switch is not attached to the fabric.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.12.3.3.3.1.3

confSwitchMAC

The MAC of the configured switch.

SNMPv2-TCPhysAddress

Textual Convention: SNMPv2-TCPhysAddress OctetString

.1.3.6.1.4.1.20301.2.7.21.12.3.3.3.1.4

confSwitchAttachedSwNumber

The asnum (attached switch number) of the configured switch;
0 if the switch is not attached to the fabric

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.12.3.3.3.1.5

confSwitchMode

The fabric mode for the switch

Enumeration

Enumerated Values:

1	master
2	backup
3	member

.1.3.6.1.4.1.20301.2.7.21.12.3.3.3.1.6

attachedSwitchesTable

table

.1.3.6.1.4.1.20301.2.7.21.12.3.3.4 · 1 row entry · 11 columns

Open in standard view

The table of the attached switches in fabric

attachedSwitchesEntry entry .1.3.6.1.4.1.20301.2.7.21.12.3.3.4.1

Information about an attached switch

Indexes

attachedSwitchNumber

Column Syntax OID

attachedSwitchNumber

The number of the attached switch.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.12.3.3.4.1.1

attachedSwitchUUID

The UUID of the attached switch.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.12.3.3.4.1.2

attachedSwitchBay

The number of the bay where the attached switch is located.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.12.3.3.4.1.3

attachedSwitchMAC

The MAC of the attached switch.

SNMPv2-TCPhysAddress

Textual Convention: SNMPv2-TCPhysAddress OctetString

.1.3.6.1.4.1.20301.2.7.21.12.3.3.4.1.4

attachedSwitchConfSwNumber

The csnum (configured switch number) of the attached switch;
if the switch is not configured, 0 is returned.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.12.3.3.4.1.5

attachedSwitchState

The state of the attached switch.

Enumeration

Enumerated Values:

0	unknown
1	init
2	masterLearnt
3	cfgReqSent
4	cfgReqRcvd
5	cfgApplied
6	inFabric
7	attach
8	forcedDetach
9	reqAttach
10	unmatch

.1.3.6.1.4.1.20301.2.7.21.12.3.3.4.1.6

attachedSwitchImageSlot

The software image slot used at the current boot
by the attached switch.

Enumeration

Enumerated Values:

1	image1
2	image2

.1.3.6.1.4.1.20301.2.7.21.12.3.3.4.1.7

attachedSwitchImageVersion

The software version running on the attached switch.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.12.3.3.4.1.8

attachedSwitchSerialNum

The serial number of the attached switch.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.12.3.3.4.1.9

attachedSwitchMode

The fabric mode for the switch

Enumeration

Enumerated Values:

1	master
2	backup
3	member

.1.3.6.1.4.1.20301.2.7.21.12.3.3.4.1.10

attachedSwitchType

The type of the attached switch

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.12.3.3.4.1.11

linkInfoTable

table

.1.3.6.1.4.1.20301.2.7.21.12.3.4 · 1 row entry · 11 columns

Open in standard view

The table of the fabric links

fabricLinkInfoEntry entry .1.3.6.1.4.1.20301.2.7.21.12.3.4.1

Information about a fabric link

Indexes

fabricLinkAttachedSwNum fabricLinkSwitchPort

Column Syntax OID

fabricLinkAttachedSwNum

The number of the attached switch to which the fabric port belongs.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.12.3.4.1.1

fabricLinkSwitchPort

The switch port number of the fabric port.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.12.3.4.1.2

fabricLinkMAC

The MAC of the fabric port.

SNMPv2-TCPhysAddress

Textual Convention: SNMPv2-TCPhysAddress OctetString

.1.3.6.1.4.1.20301.2.7.21.12.3.4.1.3

fabricLinkConfSwNum

The csnum (configured switch number) of the switch
to which the fabric port belongs; 0 if the switch is not configured.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.12.3.4.1.4

fabricLinkState

The state of the fabric link.

Enumeration

Enumerated Values:

1	down
2	up
3	disabled

.1.3.6.1.4.1.20301.2.7.21.12.3.4.1.5

fabricPortTrunkID

The identifier of the trunk to which the fabric port belongs.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.12.3.4.1.6

fabricPortPeerAttachedSwNum

The number of the attached switch (asnum) to which the fabric port
is connected.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.12.3.4.1.7

fabricPortPeerPortIndex

The number of the fabric port which is at the other end of the link.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.12.3.4.1.8

fabricPortPeerTrunk

The identifier of the fabric trunk which is at the other end of the
link.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.12.3.4.1.9

fabricLinkSwitchPortAlias

The switch port alias of the fabric port.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.12.3.4.1.10

fabricPortPeerPortAlias

The alias of the fabric port which is at the other end of the link.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.12.3.4.1.11

pushStatusInfoTable

table

.1.3.6.1.4.1.20301.2.7.21.12.3.8 · 1 row entry · 5 columns

Open in standard view

The table for the status of the transfers from the master 
to the attached switches

pushStatusInfoEntry entry .1.3.6.1.4.1.20301.2.7.21.12.3.8.1

Information about the transfers from the master
to an attached switch.

Indexes

pushInfoAttachedSwNum

Column Syntax OID

pushInfoAttachedSwNum

The number of the attached switch.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.12.3.8.1.1

pushInfoImage1

The status of the transfer of image 1 from the master
to the attached switch.

Enumeration

Enumerated Values:

1	rcvSuccessful
2	rcvFailed
3	notReceived

.1.3.6.1.4.1.20301.2.7.21.12.3.8.1.2

pushInfoImage2

The status of the transfer of image 2 from the master
to the attached switch.

Enumeration

Enumerated Values:

1	rcvSuccessful
2	rcvFailed
3	notReceived

.1.3.6.1.4.1.20301.2.7.21.12.3.8.1.3

pushInfoBootImage

The status of the transfer of the boot image from the master
to the attached switch.

Enumeration

Enumerated Values:

1	rcvSuccessful
2	rcvFailed
3	notReceived

.1.3.6.1.4.1.20301.2.7.21.12.3.8.1.4

pushInfoCfgFile

The status of the transfer of the config file from the master
to the attached switch.

Enumeration

Enumerated Values:

1	rcvSuccessful
2	rcvFailed
3	notReceived

.1.3.6.1.4.1.20301.2.7.21.12.3.8.1.5

fabricTrunkTable

table

.1.3.6.1.4.1.20301.2.7.21.12.3.9 · 1 row entry · 5 columns

Open in standard view

The table for the fabric trunks.

fabricTrunkEntry entry .1.3.6.1.4.1.20301.2.7.21.12.3.9.1

Information about fabric (fabric) trunk.

Indexes

fabricTrunkID

Column	Syntax	OID
fabricTrunkID The identifier of the fabric trunk. The format used is TrunkxToy where x is the attached switch number of the source switch and y is the attached switch number of the destination switch; for example, Trunk2To7 should id…	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.12.3.9.1.1`
fabricTrunkAttachedSwNum The attached switch number (asnum) of the switch to which the fabric trunk belongs.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.12.3.9.1.2`
fabricTrunkPorts The bitmap of the local ports which form the fabric trunk. The ports are presented in bitmap format in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ port 8 \|…	OctetString	`.1.3.6.1.4.1.20301.2.7.21.12.3.9.1.3`
fabricTrunkPeerAttachedSwNum The attached switch number (asnum) of the switch to which the fabric trunk is connected.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.12.3.9.1.4`
fabricTrunkPeerID The identifier of the fabric trunk to which this fabric trunk is connected to.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.12.3.9.1.5`

fabricPathTable

table

.1.3.6.1.4.1.20301.2.7.21.12.3.11 · 1 row entry · 3 columns

Open in standard view

The table to specify the path (the fabric trunks) used by packets
going from a switch of the fabric to another switch of the #STACK_DESC_OPT#.

fabricPathEntry entry .1.3.6.1.4.1.20301.2.7.21.12.3.11.1

Information about the fabric trunk to use by a switch for the traffic
which should go to a particular switch of the fabric

Indexes

fabricConfiguredSwNumFrom fabricConfiguredSwNumTo

Column	Syntax	OID
fabricConfiguredSwNumFrom The configured switch number (csnum) of the source switch.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.12.3.11.1.1`
fabricConfiguredSwNumTo The configured switch number (csnum) of the destination switch.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.12.3.11.1.2`
fabricTrunkIDThrough The identifier of a fabric trunk from the source switch that is used to send the traffic to the destination switch.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.12.3.11.1.3`

portNumberTable

table

.1.3.6.1.4.1.20301.2.7.21.12.3.12 · 1 row entry · 4 columns

Open in standard view

The table to give the system port number used in the user interfaces
for a port specified by the configured switch number and the local
port number.

portNumberEntry entry .1.3.6.1.4.1.20301.2.7.21.12.3.12.1

The mapping between the (switch number, local port number) and
user interface system port number.

Indexes

configuredSwNum localPortNum

Column	Syntax	OID
configuredSwNum The configured switch number (csnum) of the switch to which the port belongs.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.12.3.12.1.1`
localPortNum The local port number: the number assigned to the port with respect to the switch to which it belongs.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.12.3.12.1.2`
sysPortNum The system port number: the number assigned to the port with respect to the whole fabric. This is the usual number used as index in the port related tables.	PortNumber Textual Convention: PortNumber `Unsigned32`	`.1.3.6.1.4.1.20301.2.7.21.12.3.12.1.3`
localPortAlias The local port alias: the alias assigned to the port with respect to the switch to which it belongs.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.12.3.12.1.4`

fabricBootCurTable

table

.1.3.6.1.4.1.20301.2.7.21.12.5.1.1 · 1 row entry · 5 columns

Open in standard view

The table of currently booted fabric settings for the switches 
of the fabric.

fabricBootCurTableEntry entry .1.3.6.1.4.1.20301.2.7.21.12.5.1.1.1

Currently booted fabric settings for a switch
of the fabric.

Indexes

fabricBootCurSwitchNumber

Column Syntax OID

fabricBootCurSwitchNumber

The attached switch number.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.12.5.1.1.1.1

fabricBootCurMode

The current (booted) fabric mode of the switch; when the switch
is standalone the notAvailable(1) value is always returned

Enumeration

Enumerated Values:

1	notAvailable
2	master
3	member

.1.3.6.1.4.1.20301.2.7.21.12.5.1.1.1.2

fabricBootCurTrunkPorts

The current (booted) external ports (10G or higher) which form
the Fabric Trunk
The ports are presented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| …

OctetString

.1.3.6.1.4.1.20301.2.7.21.12.5.1.1.1.3

fabricBootCurVlan

The current (booted) fabric VLAN number for control communication

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.12.5.1.1.1.4

fabricBootCurSIFabricDomain

Set the SI Fabric domain number

Integer32

Constraints:
range: 1-100

.1.3.6.1.4.1.20301.2.7.21.12.5.1.1.1.6

fabricBootSavedTable

table

.1.3.6.1.4.1.20301.2.7.21.12.5.2.1 · 1 row entry · 10 columns

Open in standard view

The table of the current fabric settings saved for the next reboot
(for all switches in the fabric) .

fabricBootSavedTableEntry entry .1.3.6.1.4.1.20301.2.7.21.12.5.2.1.1

Current fabric settings saved for the next reboot for a switch
of the fabric.

Indexes

fabricBootSavedSwitchNumber

Column Syntax OID

fabricBootSavedSwitchNumber

The attached switch number.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.12.5.2.1.1.1

fabricBootSavedMode

Set the fabric mode of the switch after the next reset

Enumerationr/w

Enumerated Values:

1	master
2	member

.1.3.6.1.4.1.20301.2.7.21.12.5.2.1.1.2

fabricBootSavedTrunkPortIndexAdd

When set, add an external port (10G or higher) to the Fabric Trunk;
when read, the value 0 is returned

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.12.5.2.1.1.3

fabricBootSavedTrunkPortIndexRem

When set, remove an external port (10G or higher) from the Fabric Trunk;
when read, the value 0 is returned

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.12.5.2.1.1.4

fabricBootSavedTrunkPorts

The external ports (10G or higher) which will form the Fabric Trunk
after the next reset of the switch
The ports are presented in bitmap format in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx…

OctetString

.1.3.6.1.4.1.20301.2.7.21.12.5.2.1.1.5

fabricBootSavedVlan

The saved fabric VLAN number for control communication (it will become
effective after the next reset)

Integer32r/w

Constraints:
range: 2-4094

.1.3.6.1.4.1.20301.2.7.21.12.5.2.1.1.6

fabricBootSavedClear

When clear(1) is written, then the saved fabric parameters are set to the
factory default values; when read, other(2) is always returned

Enumerationr/w

Enumerated Values:

1	clear
2	other

.1.3.6.1.4.1.20301.2.7.21.12.5.2.1.1.7

fabricBootSavedSIFabricDomain

Set the SI Fabric domain number

Integer32r/w

Constraints:
range: 1-100

.1.3.6.1.4.1.20301.2.7.21.12.5.2.1.1.9

fabricBootSavedTrunkPortAliasAdd

When set, add an external port alias (10G or higher) to the Fabric Trunk;
when read, the value 0 is returned

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.12.5.2.1.1.10

fabricBootSavedTrunkPortAliasRem

When set, remove an external port alias (10G or higher) from the Fabric Trunk;
when read, the value 0 is returned

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.12.5.2.1.1.11

fabricBootSwitchTable

table

.1.3.6.1.4.1.20301.2.7.21.12.5.3 · 1 row entry · 2 columns

Open in standard view

The table for resetting the switches in the fabric. Contains only 
the entries for configured and attached switches, indexed by the 
configured switch number

fabricBootSwitchEntry entry .1.3.6.1.4.1.20301.2.7.21.12.5.3.1

A row in the table for resetting the switches in the fabric

Indexes

fabricBootSwitchNum

Column Syntax OID

fabricBootSwitchNum

The configured switch number.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.12.5.3.1.1

fabricBootSwitchReset

This is an action object to reboot the selected switch.
other(1) is returned always when read.

Enumerationr/w

Enumerated Values:

1	other
2	reset

.1.3.6.1.4.1.20301.2.7.21.12.5.3.1.2

etsCurCfgMcPGTable

table

.1.3.6.1.4.1.20301.2.7.21.13.1.3 · 1 row entry · 2 columns

Open in standard view

The table of Multicast Priority Allocation

etsCurCfgMcPGEntry entry .1.3.6.1.4.1.20301.2.7.21.13.1.3.1

Information about Multicast Priority Allocation

Indexes

etsCurCfgMcPrioId

Column	Syntax	OID
etsCurCfgMcPrioId The priority which is to be assigned to a multicast priority group	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.20301.2.7.21.13.1.3.1.1`
etsCurCfgMcPGId Multicast priority group number	Integer32 Constraints: `range: 0-3`	`.1.3.6.1.4.1.20301.2.7.21.13.1.3.1.2`

etsNewCfgMcPGTable

table

.1.3.6.1.4.1.20301.2.7.21.13.1.4 · 1 row entry · 2 columns

Open in standard view

The table of Multicast Priority Allocation

etsNewCfgMcPGEntry entry .1.3.6.1.4.1.20301.2.7.21.13.1.4.1

Information about Multicast Priority Allocation

Indexes

etsNewCfgMcPrioId

Column	Syntax	OID
etsNewCfgMcPrioId The priority which is to be assigned to a multicast priority group	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.20301.2.7.21.13.1.4.1.1`
etsNewCfgMcPGId Multicast priority group Number	Integer32r/w Constraints: `range: 0-3`	`.1.3.6.1.4.1.20301.2.7.21.13.1.4.1.2`

etsCurCfgMcPgBwTable

table

.1.3.6.1.4.1.20301.2.7.21.13.1.5 · 1 row entry · 3 columns

Open in standard view

The table of Multicast Bandwidth Allocation

etsCurCfgMcPgBwEntry entry .1.3.6.1.4.1.20301.2.7.21.13.1.5.1

Information about Multicast Bandwidth Allocation

Indexes

etsCurCfgMcPgBwId

Column	Syntax	OID
etsCurCfgMcPgBwId The multicast priority group for which bandwidth is allocated in this table.	Integer32 Constraints: `range: 0-3`	`.1.3.6.1.4.1.20301.2.7.21.13.1.5.1.1`
etsCurCfgMcPgBw Multicast priority group's bandwidth	Integer32 Constraints: `range: 0-100`	`.1.3.6.1.4.1.20301.2.7.21.13.1.5.1.2`
etsCurCfgMcPgDesc Multicast priority group's description	OctetString Constraints: `range: 0-64`	`.1.3.6.1.4.1.20301.2.7.21.13.1.5.1.3`

etsNewCfgMcPgBwTable

table

.1.3.6.1.4.1.20301.2.7.21.13.1.6 · 1 row entry · 3 columns

Open in standard view

The table of Multicast Bandwidth Allocation

etsNewCfgMcPgBwEntry entry .1.3.6.1.4.1.20301.2.7.21.13.1.6.1

Information about Multicast Bandwidth Allocation

Indexes

etsNewCfgMcPgBwId

Column	Syntax	OID
etsNewCfgMcPgBwId The multicast priority group for which bandwidth is allocated in this table.	Integer32 Constraints: `range: 0-3`	`.1.3.6.1.4.1.20301.2.7.21.13.1.6.1.1`
etsNewCfgMcPgBw Multicast priority group's bandwidth	Integer32r/w Constraints: `range: 0-100`	`.1.3.6.1.4.1.20301.2.7.21.13.1.6.1.2`
etsNewCfgMcPgDesc Multicast priority group's description	OctetStringr/w Constraints: `range: 0-64`	`.1.3.6.1.4.1.20301.2.7.21.13.1.6.1.3`

fipsPortCurCfgTable

table

.1.3.6.1.4.1.20301.2.7.21.14.1.3.7 · 1 row entry · 3 columns

Open in standard view

The table of FIP Snooping port current config.

fipsPortCurCfgEntry entry .1.3.6.1.4.1.20301.2.7.21.14.1.3.7.1

FIP Config for a particular port.

Indexes

fipsPortCurCfgIndex

Column Syntax OID

fipsPortCurCfgIndex

The port number

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.14.1.3.7.1.1

fipsPortCurCfgFcfMode

Weither the port is set to have FCF auto detection, on, or off.

Enumeration

Enumerated Values:

0	auto
1	on
2	off

.1.3.6.1.4.1.20301.2.7.21.14.1.3.7.1.2

fipsPortCurCfgFipsEna

FIP snooping enabled or disabled on this port.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.14.1.3.7.1.3

fipsPortNewCfgTable

table

.1.3.6.1.4.1.20301.2.7.21.14.1.3.8 · 1 row entry · 3 columns

Open in standard view

The table of FIP Snooping port new config.

fipsPortNewCfgEntry entry .1.3.6.1.4.1.20301.2.7.21.14.1.3.8.1

FIP Config for a particular port.

Indexes

fipsPortNewCfgIndex

Column Syntax OID

fipsPortNewCfgIndex

The port number

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.14.1.3.8.1.1

fipsPortNewCfgFcfMode

Set this port to have FCF on, off, or auto detection.

Enumerationr/w

Enumerated Values:

0	auto
1	on
2	off

.1.3.6.1.4.1.20301.2.7.21.14.1.3.8.1.2

fipsPortNewCfgFipsEna

Enable or disable FIP snooping on this port.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.14.1.3.8.1.3

fcoeStatsTable

table

.1.3.6.1.4.1.20301.2.7.21.14.2.1 · 1 row entry · 5 columns

Open in standard view

The table of fcoe statistics per switch unit.

fcoeStatsEntry entry .1.3.6.1.4.1.20301.2.7.21.14.2.1.1

A switch unit.

Indexes

fcoeStatsIndex

Column	Syntax	OID
fcoeStatsIndex The switch index for fips statistics	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.14.2.1.1.1`
fcoeStatsFcfAdded The number of FCF added to the FCOE database.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.14.2.1.1.2`
fcoeStatsFcfRemoved The number of FCF removed to the FCOE database.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.14.2.1.1.3`
fcoeStatsFcoeAdded The number of FCOE connection added to the FCOE database.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.14.2.1.1.4`
fcoeStatsFcoeRemoved The number of FCOE connection removed to the FCOE database.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.14.2.1.1.5`

fcoeStatsKeepAliveTable

table

.1.3.6.1.4.1.20301.2.7.21.14.2.2 · 1 row entry · 3 columns

Open in standard view

The table of fcoe Keep-Alive statistics.

fcoeStatsKeepAliveEntry entry .1.3.6.1.4.1.20301.2.7.21.14.2.2.1

A FCF Keep Alive entry.

Indexes

fcoeStatsKeepAliveIndex

Column	Syntax	OID
fcoeStatsKeepAliveIndex The FCF index	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.14.2.2.1.1`
fcoeStatsKeepAliveFcfMac Detected FCF MAC address.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.14.2.2.1.2`
fcoeStatsKeepAliveCount FCF MAC Keep Alive count.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.14.2.2.1.3`

fipsInfoPortTable

table

.1.3.6.1.4.1.20301.2.7.21.14.3.1.1 · 1 row entry · 4 columns

Open in standard view

The table of fips port run-time information.

fipsInfoPortEntry entry .1.3.6.1.4.1.20301.2.7.21.14.3.1.1.1

A port in the fips information table.

Indexes

fipsInfoPortIndex fipsInfoAclSequencer

Column	Syntax	OID
fipsInfoPortIndex The port index for fips	PortNumber Textual Convention: PortNumber `Unsigned32`	`.1.3.6.1.4.1.20301.2.7.21.14.3.1.1.1.1`
fipsInfoAclSequencer The fip sequence number for an acl in this port	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.14.3.1.1.1.2`
fipsInfoAcl An FIPS ACL entry	OctetString Constraints: `range: 0-31`	`.1.3.6.1.4.1.20301.2.7.21.14.3.1.1.1.3`
fipsInfoPortAlias The port alias for fips	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.14.3.1.1.1.4`

fipsInfoFcfTable

table

.1.3.6.1.4.1.20301.2.7.21.14.3.1.2.2 · 1 row entry · 4 columns

Open in standard view

The table of fips FCF detected.

fipsInfoFcfEntry entry .1.3.6.1.4.1.20301.2.7.21.14.3.1.2.2.1

A FCF in the fips information table.

Indexes

fipsInfoFcfIndex

Column	Syntax	OID
fipsInfoFcfIndex FCF index	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.14.3.1.2.2.1.1`
fipsInfoFcfMac FCF MAC	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.14.3.1.2.2.1.2`
fipsInfoFcfPort FCF Port/Trunk alias	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.14.3.1.2.2.1.3`
fipsInfoFcfVlan FCF Vlan	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.14.3.1.2.2.1.4`

fipsInfoFcoeTable

table

.1.3.6.1.4.1.20301.2.7.21.14.3.1.3.2 · 1 row entry · 5 columns

Open in standard view

The table of fips FCOE connections.

fipsInfoFcoeEntry entry .1.3.6.1.4.1.20301.2.7.21.14.3.1.3.2.1

A FCOE connection in the fips information table.

Indexes

fipsInfoFcoeIndex

Column	Syntax	OID
fipsInfoFcoeIndex FCOE connection index	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.14.3.1.3.2.1.1`
fipsInfoFcoeVNPortMac FCOE connection VNPort MAC	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.14.3.1.3.2.1.2`
fipsInfoFcoeFcfMac FCOE connection FCF MAC	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.14.3.1.3.2.1.3`
fipsInfoFcoePort FCOE connection Port/Trunk Alias.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.14.3.1.3.2.1.4`
fipsInfoFcoeVlan FCOE connection Vlan	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.14.3.1.3.2.1.5`

fipsInfoVlansTable

table

.1.3.6.1.4.1.20301.2.7.21.14.3.1.4.1 · 1 row entry · 5 columns

Open in standard view

The table of FCOE VLANs detected.

fipsInfoVlansEntry entry .1.3.6.1.4.1.20301.2.7.21.14.3.1.4.1.1

A FCOE VLAN in the fipsInfoVlans information table.

Indexes

fipsInfoVlansId fipsInfoVlansFeatureIndex

Column	Syntax	OID
fipsInfoVlansId FCoE Vlan index	Integer32 Constraints: `range: 1-4095`	`.1.3.6.1.4.1.20301.2.7.21.14.3.1.4.1.1.1`
fipsInfoVlansFeatureIndex FCoE Vlan feature index. The feature index will accept values from 1 to maximum SPAR ID(8) for the VLANs created by SPAR and 0 for the other types of VLANs.	Integer32 Constraints: `range: 0-8`	`.1.3.6.1.4.1.20301.2.7.21.14.3.1.4.1.1.2`
fipsInfoVlansCreator The FCoE VLAN Creator.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.20301.2.7.21.14.3.1.4.1.1.3`
fipsInfoVlansPorts The port list information in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ port 8 \|\| \|\| \|\| \|…	OctetString	`.1.3.6.1.4.1.20301.2.7.21.14.3.1.4.1.1.4`
fipsInfoVlansTrunks The FCoE VLAN trunk list.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.14.3.1.4.1.1.5`

vmCurCfgGroupTable

table

.1.3.6.1.4.1.20301.2.7.21.15.2.1 · 1 row entry · 8 columns

Open in standard view

The table of VM groups in the current config

vmCurCfgGroupEntry entry .1.3.6.1.4.1.20301.2.7.21.15.2.1.1

Information about VM on a group in current config.

Indexes

vmCurCfgGroupIndex

Column Syntax OID

vmCurCfgGroupIndex

The index of the vm group table.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.15.2.1.1.1

vmCurCfgGroupVlan

Current Vlan used by the group.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.15.2.1.1.2

vmCurCfgGroupPorts

The port list in the VM Group. The ports are presented in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ po…

OctetString

.1.3.6.1.4.1.20301.2.7.21.15.2.1.1.3

vmCurCfgGroupTagState

Enable VLAN tagging on all VM group ports.

Enumeration

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.20301.2.7.21.15.2.1.1.4

vmCurCfgGroupStg

Current stg of the group vlan.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.15.2.1.1.5

vmCurCfgGroupProfileName

Current profile name used by the group.

OctetString

Constraints:
range: 0-40

.1.3.6.1.4.1.20301.2.7.21.15.2.1.1.17

vmCurCfgGroupValidateMode

Current validation mode used by the group.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.15.2.1.1.18

vmCurCfgGroupVPorts

The vport list in the VM Group.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.15.2.1.1.23

vmNewCfgGroupTable

table

.1.3.6.1.4.1.20301.2.7.21.15.2.2 · 1 row entry · 25 columns

Open in standard view

The table of VM groups in the new config

vmNewCfgGroupEntry entry .1.3.6.1.4.1.20301.2.7.21.15.2.2.1

Information about VM on a group in new config.

Indexes

vmNewCfgGroupIndex

Column Syntax OID

vmNewCfgGroupIndex

The index of the vm group table.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.15.2.2.1.1

vmNewCfgGroupVlan

Set Vlan to be used by the group.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.15.2.2.1.2

vmNewCfgGroupPorts

The port list in the VM Group. The ports are presented in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ po…

OctetString

.1.3.6.1.4.1.20301.2.7.21.15.2.2.1.3

vmNewCfgGroupAddVm

Add a virtual machine to the group by
UUID / Name / IP / MAC Address
Note: MAC address format xx:xx:xx:xx:xx:xx

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.15.2.2.1.4

vmNewCfgGroupRemVm

Remove a virtual machine from the group by
UUID / Name / IP / MAC Address
Note: MAC address format xx:xx:xx:xx:xx:xx

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.15.2.2.1.5

vmNewCfgGroupAddVmIdx

Add virtual MAC address by index to the group.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.15.2.2.1.6

vmNewCfgGroupRemVmIdx

Remove a virtual MAC address by index from the group.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.15.2.2.1.7

vmNewCfgGroupAddPortIdx

Add a port to the group.

PortNumberr/w

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.15.2.2.1.8

vmNewCfgGroupRemPortIdx

Remove a port from the group.

PortNumberr/w

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.15.2.2.1.9

vmNewCfgGroupAddTrunk

Add trunk to the group.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.15.2.2.1.10

vmNewCfgGroupRemTrunk

Remove trunk from the group.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.15.2.2.1.11

vmNewCfgGroupTagState

Enable VLAN tagging on all VM group ports.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.20301.2.7.21.15.2.2.1.12

vmNewCfgGroupAddLacpKey

Add LACP trunk to the group.

Unsigned32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.20301.2.7.21.15.2.2.1.13

vmNewCfgGroupRemLacpKey

Remove LACP trunk from the group.

Unsigned32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.20301.2.7.21.15.2.2.1.14

vmNewCfgGroupAddProfile

Add VM Profile to the group.

OctetStringr/w

Constraints:
range: 0-40

.1.3.6.1.4.1.20301.2.7.21.15.2.2.1.15

vmNewCfgGroupRemProfile

Remove any VM profile associated with the group.

Enumerationr/w

Enumerated Values:

remove

.1.3.6.1.4.1.20301.2.7.21.15.2.2.1.16

vmNewCfgGroupProfileName

New profile name to be used by the group.

OctetString

Constraints:
range: 0-40

.1.3.6.1.4.1.20301.2.7.21.15.2.2.1.17

vmNewCfgGroupDelete

Delete VM Group.

Enumerationr/w

Enumerated Values:

delete

.1.3.6.1.4.1.20301.2.7.21.15.2.2.1.18

vmNewCfgGroupStg

Set group vlan spanning tree group.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.15.2.2.1.19

vmNewCfgGroupValidateMode

Set group validation mode:
noValidation : no validation will be performed.
basicCheck: validate ESX port.
advancedCheck: validate ESX port and VM UUID.

Enumerationr/w

Enumerated Values:

0	noValidation
1	basicCheck
2	advancedCheck

.1.3.6.1.4.1.20301.2.7.21.15.2.2.1.20

vmNewCfgGroupAddvPort

Add vPort in VMGroup

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.15.2.2.1.21

vmNewCfgGroupRemvPort

Remove vPort from VMGroup

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.15.2.2.1.22

vmNewCfgGroupVPorts

The vport list in the VM Group.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.15.2.2.1.23

vmNewCfgGroupAddPortAlias

Add a port to the group, using it's alias.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.15.2.2.1.24

vmNewCfgGroupRemPortAlias

Remove a port from the group, using it's alias.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.15.2.2.1.25

vmCurCfgGroupMacTable

table

.1.3.6.1.4.1.20301.2.7.21.15.2.3 · 1 row entry · 3 columns

Open in standard view

Virtual machine group current configuration table.

vmCurCfgGroupMaclistEntry entry .1.3.6.1.4.1.20301.2.7.21.15.2.3.1

Information about virtual machine group configuration. Indexes are:
- vmCurCfgGroupMacGroupIndex - group number
- vmCurCfgGroupMacVMIndex - virtual machine config index

Indexes

vmCurCfgGroupMacGroupIndex vmCurCfgGroupMacVMIndex

Column	Syntax	OID
vmCurCfgGroupMacGroupIndex The group number for which the info is related.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.15.2.3.1.1`
vmCurCfgGroupMacVMIndex The virtual machine number for which the info is related.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.15.2.3.1.2`
vmCurCfgGroupMacVMMac virtual machine MAC address.	SNMPv2-TCPhysAddress Textual Convention: SNMPv2-TCPhysAddress `OctetString`	`.1.3.6.1.4.1.20301.2.7.21.15.2.3.1.3`

vmNewCfgGroupMacTable

table

.1.3.6.1.4.1.20301.2.7.21.15.2.4 · 1 row entry · 3 columns

Open in standard view

virtual machine group new configuration table.

vmNewCfgGroupMaclistEntry entry .1.3.6.1.4.1.20301.2.7.21.15.2.4.1

Information about virtual machine group

Indexes

vmNewCfgGroupMacGroupIndex vmNewCfgGroupMacVMIndex

Column	Syntax	OID
vmNewCfgGroupMacGroupIndex The group number for which the info is related.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.15.2.4.1.1`
vmNewCfgGroupMacVMIndex The virtual machine number for which the info is related.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.15.2.4.1.2`
vmNewCfgGroupMacVMMac The virtual machine MAC address.	SNMPv2-TCPhysAddress Textual Convention: SNMPv2-TCPhysAddress `OctetString`	`.1.3.6.1.4.1.20301.2.7.21.15.2.4.1.3`

vmbwCurCfgTable

table

.1.3.6.1.4.1.20301.2.7.21.15.3.1.1 · 1 row entry · 7 columns

Open in standard view

The table of current VM Bandwidth configuration.

vmbwCurCfgEntry entry .1.3.6.1.4.1.20301.2.7.21.15.3.1.1.1

A row in the current VM bandwidth table.

Indexes

vmbwCurCfgMac

Column Syntax OID

vmbwCurCfgMac

MAC address of VM for which bandwidth control information is related.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.20301.2.7.21.15.3.1.1.1.1

vmbwCurCfgTxRate

VM transmit bandwidth committed rate in kbps (ingress for switch).

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.15.3.1.1.1.2

vmbwCurCfgTxBurst

VM transmit bandwidth max burst size in kilobits (ingress for switch).

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.15.3.1.1.1.3

vmbwCurCfgTxAclId

ACL used for VM transmit bandwidth.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.15.3.1.1.1.4

vmbwCurCfgRxRate

VM receive bandwidth committed rate in kbps (egress for switch).

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.15.3.1.1.1.5

vmbwCurCfgRxBurst

VM receive bandwidth max burst size in kilobits (egress for switch).

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.15.3.1.1.1.6

vmbwCurCfgCtrl

Enable/Disable VM bandwidth control entry.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.15.3.1.1.1.7

vmbwNewCfgTable

table

.1.3.6.1.4.1.20301.2.7.21.15.3.1.2 · 1 row entry · 8 columns

Open in standard view

The table of new VM Bandwidth configuration.

vmbwNewCfgEntry entry .1.3.6.1.4.1.20301.2.7.21.15.3.1.2.1

A row in the new VM bandwidth table.

Indexes

vmbwNewCfgMac

Column Syntax OID

vmbwNewCfgMac

MAC address of VM for which bandwidth control information is related.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.20301.2.7.21.15.3.1.2.1.1

vmbwNewCfgTxRate

VM transmit bandwidth committed rate in kbps (ingress for switch).
Set this to zero to disable transmit bandwidth control.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.15.3.1.2.1.2

vmbwNewCfgTxBurst

VM transmit bandwidth max burst size in kilobits (ingress for switch).
Set this to zero to disable transmit bandwidth control.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.15.3.1.2.1.3

vmbwNewCfgTxAclId

ACL used for VM transmit bandwidth.
This is optional parameter. If set to zero the system will choose
one ACL for tx bandwidth control.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.15.3.1.2.1.4

vmbwNewCfgRxRate

VM receive bandwidth committed rate in kbps (egress for switch).
Set this to zero to disable receive bandwidth control.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.15.3.1.2.1.5

vmbwNewCfgRxBurst

VM receive bandwidth max burst size in kilobits (egress for switch).
Set this to zero to disable receive bandwidth control.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.15.3.1.2.1.6

vmbwNewCfgCtrl

VM bandwidth control entry status

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.15.3.1.2.1.7

vmbwNewCfgDelete

This is an action object to delete a VM Bandwidth entry.
other(1) is returned always when read.
To delete an entry enter delete(2).

Enumerationr/w

Enumerated Values:

1	other
2	delete

.1.3.6.1.4.1.20301.2.7.21.15.3.1.2.1.8

vmCurCfgProfilesTable

table

.1.3.6.1.4.1.20301.2.7.21.15.4.1 · 1 row entry · 9 columns

Open in standard view

The table of VM profiles in the current config

vmCurCfgProfileEntry entry .1.3.6.1.4.1.20301.2.7.21.15.4.1.1

Information about a VM profile in current config.

Indexes

vmCurCfgProfileIndex

Column	Syntax	OID
vmCurCfgProfileIndex The index of the vm profiles table (1..32).	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.15.4.1.1.1`
vmCurCfgProfileName VM Profile name.	OctetString Constraints: `range: 0-40`	`.1.3.6.1.4.1.20301.2.7.21.15.4.1.1.2`
vmCurCfgProfileVlan Current VM Profile VLAN Id	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.15.4.1.1.3`
vmCurCfgProfileShapingAverage Current VM Profile Shaping Average.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.15.4.1.1.4`
vmCurCfgProfileShapingBurst Current VM Profile Shaping Burst.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.15.4.1.1.5`
vmCurCfgProfileShapingPeak Current VM Profile Shaping Peak.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.15.4.1.1.6`
vmCurCfgProfileEgressShapingAverage Current VM Profile Egress Shaping Average.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.15.4.1.1.7`
vmCurCfgProfileEgressShapingBurst Current VM Profile Egress Shaping Burst.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.15.4.1.1.8`
vmCurCfgProfileEgressShapingPeak Current VM Profile Egress Shaping Peak.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.15.4.1.1.9`

vmNewCfgProfilesTable

table

.1.3.6.1.4.1.20301.2.7.21.15.4.2 · 1 row entry · 10 columns

Open in standard view

The table of VM profiles in the current config

vmNewCfgProfileEntry entry .1.3.6.1.4.1.20301.2.7.21.15.4.2.1

Information about a VM profile in current config.

Indexes

vmNewCfgProfileIndex

Column Syntax OID

vmNewCfgProfileIndex

The index of the vm profiles table (1..32).

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.15.4.2.1.1

vmNewCfgProfileName

VM Profile name.

OctetStringr/w

Constraints:
range: 1-39

.1.3.6.1.4.1.20301.2.7.21.15.4.2.1.2

vmNewCfgProfileVlan

Vlan to be used by the VM profile.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.15.4.2.1.3

vmNewCfgProfileShapingAverage

Shaping average to be used by the VM profile.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.15.4.2.1.4

vmNewCfgProfileShapingBurst

Shaping burst to be used by the VM profile.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.15.4.2.1.5

vmNewCfgProfileShapingPeak

Shaping peak to be used by the VM profile.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.15.4.2.1.6

vmNewCfgProfileDelete

Delete VM Profile.

Enumerationr/w

Enumerated Values:

1	none
2	delete

.1.3.6.1.4.1.20301.2.7.21.15.4.2.1.7

vmNewCfgProfileEgressShapingAverage

Egress shaping average to be used by the VM profile.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.15.4.2.1.8

vmNewCfgProfileEgressShapingBurst

Egress shaping burst to be used by the VM profile.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.15.4.2.1.9

vmNewCfgProfileEgressShapingPeak

Egress shaping peak to be used by the VM profile.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.15.4.2.1.10

virtVMwareHostNameTable

table

.1.3.6.1.4.1.20301.2.7.21.15.5.2 · 1 row entry · 4 columns

Open in standard view

The table of names of VMware hosts in the Virtual Center.

virtVMwareHostNameEntry entry .1.3.6.1.4.1.20301.2.7.21.15.5.2.1

Information about names of VMware hosts in the Data Center.

Indexes

virtVMwareHostNameIndex

Column	Syntax	OID
virtVMwareHostNameIndex The index of the virtVMwareHostNameTable table.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.15.5.2.1.1`
virtVMwareHostNameUUID The UUID of a VMware host.	OctetString Constraints: `range: 0-64`	`.1.3.6.1.4.1.20301.2.7.21.15.5.2.1.2`
virtVMwareHostNameIpAddress The IP address of a VMware host.	OctetString Constraints: `range: 0-64`	`.1.3.6.1.4.1.20301.2.7.21.15.5.2.1.3`
virtVMwareHostNameName The name of a VMware host.	OctetString Constraints: `range: 0-64`	`.1.3.6.1.4.1.20301.2.7.21.15.5.2.1.4`

virtVMwareVMNameTable

table

.1.3.6.1.4.1.20301.2.7.21.15.5.3 · 1 row entry · 5 columns

Open in standard view

The table of VMware virtual machines in the Data Center.

virtVMwareVMNameEntry entry .1.3.6.1.4.1.20301.2.7.21.15.5.3.1

Information about VMware virtual machines in the Data Center.

Indexes

virtVMwareVMNameIndex

Column	Syntax	OID
virtVMwareVMNameIndex The index of the VMware virtual machine table in the Data Center.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.15.5.3.1.1`
virtVMwareVMNameUUID The UUID of a virtual machine.	OctetString Constraints: `range: 0-64`	`.1.3.6.1.4.1.20301.2.7.21.15.5.3.1.2`
virtVMwareVMNameVMwareName The name of a virtual machine given by VMware.	OctetString Constraints: `range: 0-64`	`.1.3.6.1.4.1.20301.2.7.21.15.5.3.1.3`
virtVMwareVMNameOsName The name of a virtual machine given by the host OS.	OctetString Constraints: `range: 0-64`	`.1.3.6.1.4.1.20301.2.7.21.15.5.3.1.4`
virtVMwareVMNameIpAddress The IP address of a virtual machine.	OctetString Constraints: `range: 0-64`	`.1.3.6.1.4.1.20301.2.7.21.15.5.3.1.5`

virtVMwareHostVswitchTable

table

.1.3.6.1.4.1.20301.2.7.21.15.5.5 · 1 row entry · 2 columns

Open in standard view

The table of Vswitches available on the specified host.

virtVMwareHostVswitchEntry entry .1.3.6.1.4.1.20301.2.7.21.15.5.5.1

Information about Vswitches available on the specified host.

Indexes

virtVMwareHostVswitchIndex

Column	Syntax	OID
virtVMwareHostVswitchIndex The index of the Vswitch table on the specified host.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.15.5.5.1.1`
virtVMwareHostVswitchName The name of a Vswitch on the specified host.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.15.5.5.1.2`

virtVMwareHostPGTable

table

.1.3.6.1.4.1.20301.2.7.21.15.5.6 · 1 row entry · 3 columns

Open in standard view

The table of Port Groups available on the specified host.

virtVMwareHostPGEntry entry .1.3.6.1.4.1.20301.2.7.21.15.5.6.1

Information about Port Groups available on the specified host.

Indexes

virtVMwareHostPGIndex

Column	Syntax	OID
virtVMwareHostPGIndex The index of the Port Group table on the specified host.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.15.5.6.1.1`
virtVMwareHostPGName The name of a Port Group on the specified host.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.15.5.6.1.2`
virtVMwareHostPGVswitchName The name of a Vswitch on the specified host.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.15.5.6.1.3`

virtVMwareHostDetailInfoTable

table

.1.3.6.1.4.1.20301.2.7.21.15.5.7 · 1 row entry · 14 columns

Open in standard view

The table of detailed information available on the specified 
host/VM interface.

virtVMwareHostDetailInfoEntry entry .1.3.6.1.4.1.20301.2.7.21.15.5.7.1

Detailed information available on the specified host/VM interface.

Indexes

virtVMwareHostDetailInfoIndex

Column	Syntax	OID
virtVMwareHostDetailInfoIndex The index of the detailed information table on the specified host/VM interface.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.15.5.7.1.1`
virtVMwareHostDetailInfoMACAddr The MAC address of the host/VM interface.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.15.5.7.1.2`
virtVMwareHostDetailInfoPortIdx The port number of the specified host/VM interface.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.15.5.7.1.3`
virtVMwareHostDetailInfoType Interface type	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.15.5.7.1.4`
virtVMwareHostDetailInfoIPAddr The IP address of the specified host/VM interface.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.15.5.7.1.5`
virtVMwareHostDetailInfoUUID The UUID of the specified host/VM interface.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.15.5.7.1.6`
virtVMwareHostDetailInfoVswitch The name of the virtual switch of the specified host/VM interface.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.15.5.7.1.7`
virtVMwareHostDetailInfoPortGroup The name of the port group of the specified host/VM interface.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.15.5.7.1.8`
virtVMwareHostDetailInfoVlanID The VLAN ID of the specified host/VM interface.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.15.5.7.1.9`
virtVMwareHostDetailInfoHostName The name of the specified host interface. N/A for VMs.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.15.5.7.1.10`
virtVMwareHostDetailInfoVMVCenterName The name of the Virtual Center of the specified VM interface. N/A for host interfaces.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.15.5.7.1.11`
virtVMwareHostDetailInfoVMOSHostName The name of the VM set by the host operating system. N/A for host interfaces.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.15.5.7.1.12`
virtVMwareHostDetailInfoVMCurrentHost The name of the host of the specified VM. N/A for host interfaces.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.15.5.7.1.13`
virtVMwareHostDetailInfoPortAlias The port alias of the specified host/VM interface.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.15.5.7.1.14`

virtVMwareVMInfoTable

table

.1.3.6.1.4.1.20301.2.7.21.15.5.9 · 1 row entry · 13 columns

Open in standard view

The table of networking information available on the 
specified VM.

virtVMwareVMInfoEntry entry .1.3.6.1.4.1.20301.2.7.21.15.5.9.1

Detailed information available on the specified VM.

Indexes

virtVMwareVMInfoIndex

Column	Syntax	OID
virtVMwareVMInfoIndex The index of the table with information on the specified VM.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.15.5.9.1.1`
virtVMwareVMInfoMACAddr The MAC address of the specified VM.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.15.5.9.1.2`
virtVMwareVMInfoPortAlias The port alias of the specified VM.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.15.5.9.1.3`
virtVMwareVMInfoType Interface type	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.15.5.9.1.4`
virtVMwareVMInfoIPAddr The IP address of the specified VM.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.15.5.9.1.5`
virtVMwareVMInfoUUID The UUID of the specified VM.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.15.5.9.1.6`
virtVMwareVMInfoVswitch The name of the virtual switch of the specified VM.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.15.5.9.1.7`
virtVMwareVMInfoPortGroup The name of the port group of the specified VM.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.15.5.9.1.8`
virtVMwareVMInfoVlanID The VLAN ID of the specified VM.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.15.5.9.1.9`
virtVMwareVMInfoVMVCenterName The name of the Virtual Center of the specified VM.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.15.5.9.1.10`
virtVMwareVMInfoVMOSHostName The name of the VM set by the host operating system.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.15.5.9.1.11`
virtVMwareVMInfoVMCurrentHost The name of the host of the specified VM.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.15.5.9.1.12`
virtVMwareVMInfoPortIdx The port number of the specified VM.	PortNumber Textual Convention: PortNumber `Unsigned32`	`.1.3.6.1.4.1.20301.2.7.21.15.5.9.1.13`

vmReadyCurCfgOuiTbl

table

.1.3.6.1.4.1.20301.2.7.21.15.8.2 · 1 row entry · 3 columns

Open in standard view

The table of current VM Ready OUI configuration.

vmReadyCurCfgOuiEntry entry .1.3.6.1.4.1.20301.2.7.21.15.8.2.1

A row in the current VM Ready OUI table.

Indexes

vmReadyCurCfgOuiMacIdx

Column	Syntax	OID
vmReadyCurCfgOuiMacIdx OUI of locally administred MAC address	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.20301.2.7.21.15.8.2.1.1`
vmReadyCurCfgOuiMac OUI of locally administred MAC address	SNMPv2-TCPhysAddress Textual Convention: SNMPv2-TCPhysAddress `OctetString`	`.1.3.6.1.4.1.20301.2.7.21.15.8.2.1.2`
vmReadyCurCfgVendor Vendor name of the OUI locally administred	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.15.8.2.1.3`

vmReadyNewCfgOuiTbl

table

.1.3.6.1.4.1.20301.2.7.21.15.8.3 · 1 row entry · 4 columns

Open in standard view

The table of new VM Ready OUI configuration.

vmReadyNewCfgOuiEntry entry .1.3.6.1.4.1.20301.2.7.21.15.8.3.1

A row in the new VM Ready OUI table.

Indexes

vmReadyNewCfgOuiMacIdx

Column Syntax OID

vmReadyNewCfgOuiMacIdx

OUI of locally administred MAC address

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.20301.2.7.21.15.8.3.1.1

vmReadyNewCfgOuiMac

New OUI of locally administred MAC address
Format xx:yy:zz

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.15.8.3.1.2

vmReadyNewCfgVendor

Vendor name of the OUI locally administred

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.15.8.3.1.3

vmReadyNewCfgDelete

If set the OUI of the locally administred MAC would be deleted

Enumerationr/w

Enumerated Values:

0	other
1	delete

.1.3.6.1.4.1.20301.2.7.21.15.8.3.1.4

ufpCurCfgPortTable

table

.1.3.6.1.4.1.20301.2.7.21.17.1.5 · 1 row entry · 3 columns

Open in standard view

The table of UFP ports

ufpCurCfgPortTableEntry entry .1.3.6.1.4.1.20301.2.7.21.17.1.5.1

A port in the ufpCurCfgPortTable

Indexes

ufpCurCfgPortIndex

Column Syntax OID

ufpCurCfgPortIndex

Port index

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.17.1.5.1.1

ufpCurCfgPortState

UFP port state

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.17.1.5.1.2

ufpCurCfgPortQosMode

UFP port QoS Mode

Enumeration

Enumerated Values:

1	bw
2	ets

.1.3.6.1.4.1.20301.2.7.21.17.1.5.1.4

ufpNewCfgPortTable

table

.1.3.6.1.4.1.20301.2.7.21.17.1.6 · 1 row entry · 4 columns

Open in standard view

The table of UFP ports

ufpNewCfgPortTableEntry entry .1.3.6.1.4.1.20301.2.7.21.17.1.6.1

A port in the ufpNewCfgPortTable

Indexes

ufpNewCfgPortIndex

Column Syntax OID

ufpNewCfgPortIndex

Port index

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.17.1.6.1.1

ufpNewCfgPortState

UFP port state

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.17.1.6.1.2

ufpNewCfgPortDelete

Delete UFP port

Enumerationr/w

Enumerated Values:

1	other
2	delete

.1.3.6.1.4.1.20301.2.7.21.17.1.6.1.4

ufpNewCfgPortQosMode

UFP port QoS Mode

Enumerationr/w

Enumerated Values:

1	bw
2	ets

.1.3.6.1.4.1.20301.2.7.21.17.1.6.1.5

ufpCurCfgVportTable

table

.1.3.6.1.4.1.20301.2.7.21.17.1.7 · 1 row entry · 11 columns

Open in standard view

Table of UFP virtual ports

ufpCurCfgVportTableEntry entry .1.3.6.1.4.1.20301.2.7.21.17.1.7.1

A vPort in the ufpCurCfgVportTable

Indexes

ufpCurCfgVportPortIndex ufpCurCfgVportIndex

Column Syntax OID

ufpCurCfgVportPortIndex

The port number of the vPort

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.17.1.7.1.1

ufpCurCfgVportIndex

The vport number of the vPort

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.17.1.7.1.2

ufpCurCfgVportState

The vPort state

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.17.1.7.1.3

ufpCurCfgVportNetworkMode

The vPort network mode

Enumeration

Enumerated Values:

1	access
2	trunk
3	auto
4	tunnel
5	fcoe

.1.3.6.1.4.1.20301.2.7.21.17.1.7.1.4

ufpCurCfgVportNetworkDefVlan

The vPort network default VLAN

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.17.1.7.1.5

ufpCurCfgVportNetworkDefTag

The vPort network default tag

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.17.1.7.1.6

ufpCurCfgVportQosBwMin

The vPort QoS minimum guaranteed bandwidth

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.17.1.7.1.7

ufpCurCfgVportQosBwMax

The vPort QoS maximum allowed bandwidth

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.17.1.7.1.8

ufpCurCfgVportQosEtsPrio

The vPort Ets system class priority

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.17.1.7.1.9

ufpCurCfgVportQosHostCtrl

The vPort host COS control

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.17.1.7.1.10

ufpCurCfgVportPrivateVlan

The vPort network Private VLAN mode

Enumeration

Enumerated Values:

1	disabled
2	trunk
3	host
4	promiscuous

.1.3.6.1.4.1.20301.2.7.21.17.1.7.1.12

ufpNewCfgVportTable

table

.1.3.6.1.4.1.20301.2.7.21.17.1.8 · 1 row entry · 12 columns

Open in standard view

Table of UFP virtual ports

ufpNewCfgVportTableEntry entry .1.3.6.1.4.1.20301.2.7.21.17.1.8.1

A vPort in the ufpNewCfgVportTable

Indexes

ufpNewCfgVportPortIndex ufpNewCfgVportIndex

Column Syntax OID

ufpNewCfgVportPortIndex

The port number of the vPort

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.17.1.8.1.1

ufpNewCfgVportIndex

The vport number of the vPort

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.17.1.8.1.2

ufpNewCfgVportState

The vPort state

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.17.1.8.1.3

ufpNewCfgVportNetworkMode

The vPort network mode

Enumerationr/w

Enumerated Values:

1	access
2	trunk
3	auto
4	tunnel
5	fcoe

.1.3.6.1.4.1.20301.2.7.21.17.1.8.1.4

ufpNewCfgVportNetworkDefVlan

The vPort network default VLAN

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.17.1.8.1.5

ufpNewCfgVportNetworkDefTag

The vPort network default tag

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.17.1.8.1.6

ufpNewCfgVportQosBwMin

The vPort QoS minimum guaranteed bandwidth

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.17.1.8.1.7

ufpNewCfgVportQosBwMax

The vPort QoS maximum allowed bandwidth

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.17.1.8.1.8

ufpNewCfgVportQosEtsPrio

The vPort Ets system class priority

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.17.1.8.1.9

ufpNewCfgVportQosHostCtrl

The vPort host COS control

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.17.1.8.1.10

ufpNewCfgVportDelete

Delete vPort

Enumerationr/w

Enumerated Values:

1	other
2	delete

.1.3.6.1.4.1.20301.2.7.21.17.1.8.1.11

ufpNewCfgVportPrivateVlan

The vPort network Private VLAN mode

Enumerationr/w

Enumerated Values:

1	disabled
2	trunk
3	host
4	promiscuous

.1.3.6.1.4.1.20301.2.7.21.17.1.8.1.13

ufpInfoCdcpTable

table

.1.3.6.1.4.1.20301.2.7.21.17.2.1 · 1 row entry · 2 columns

Open in standard view

The table of CDCP information per port

ufpInfoCdcpTableEntry entry .1.3.6.1.4.1.20301.2.7.21.17.2.1.1

A port in the ufpInfoCdcpTable

Indexes

ufpInfoCdcpPortIndex

Column	Syntax	OID
ufpInfoCdcpPortIndex Port Index	PortNumber Textual Convention: PortNumber `Unsigned32`	`.1.3.6.1.4.1.20301.2.7.21.17.2.1.1.1`
ufpInfoCdcpPortStatus Cdcp port status	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.17.2.1.1.2`

ufpInfoPortTable

table

.1.3.6.1.4.1.20301.2.7.21.17.2.2 · 1 row entry · 11 columns

Open in standard view

The table of UFP port information

ufpInfoPortTableEntry entry .1.3.6.1.4.1.20301.2.7.21.17.2.2.1

A port in the ufpInfoPortTable

Indexes

ufpInfoPortIndex

Column Syntax OID

ufpInfoPortIndex

Port index

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.17.2.2.1.1

ufpInfoPortState

Port state information

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.17.2.2.1.2

ufpInfoPortVports

Vports information

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.17.2.2.1.3

ufpInfoPortChan1

Chan 1 state

Enumeration

Enumerated Values:

1	disabled
2	up
3	down
4	mismatch
5	detached
6	downbyteaming

.1.3.6.1.4.1.20301.2.7.21.17.2.2.1.4

ufpInfoPortChan2

Chan 2 state

Enumeration

Enumerated Values:

1	disabled
2	up
3	down
4	mismatch
5	detached
6	downbyteaming

.1.3.6.1.4.1.20301.2.7.21.17.2.2.1.5

ufpInfoPortChan3

Chan 3 state

Enumeration

Enumerated Values:

1	disabled
2	up
3	down
4	mismatch
5	detached
6	downbyteaming

.1.3.6.1.4.1.20301.2.7.21.17.2.2.1.6

ufpInfoPortChan4

Chan 4 state

Enumeration

Enumerated Values:

1	disabled
2	up
3	down
4	mismatch
5	detached
6	downbyteaming

.1.3.6.1.4.1.20301.2.7.21.17.2.2.1.7

ufpInfoPortChan5

Chan 5 state

Enumeration

Enumerated Values:

1	disabled
2	up
3	down
4	mismatch
5	detached
6	downbyteaming

.1.3.6.1.4.1.20301.2.7.21.17.2.2.1.8

ufpInfoPortChan6

Chan 6 state

Enumeration

Enumerated Values:

1	disabled
2	up
3	down
4	mismatch
5	detached
6	downbyteaming

.1.3.6.1.4.1.20301.2.7.21.17.2.2.1.9

ufpInfoPortChan7

Chan 7 state

Enumeration

Enumerated Values:

1	disabled
2	up
3	down
4	mismatch
5	detached
6	downbyteaming

.1.3.6.1.4.1.20301.2.7.21.17.2.2.1.10

ufpInfoPortChan8

Chan 8 state

Enumeration

Enumerated Values:

1	disabled
2	up
3	down
4	mismatch
5	detached
6	downbyteaming

.1.3.6.1.4.1.20301.2.7.21.17.2.2.1.11

ufpInfoQosTable

table

.1.3.6.1.4.1.20301.2.7.21.17.2.3 · 1 row entry · 7 columns

Open in standard view

The table of Qos information per port

ufpInfoQosTableEntry entry .1.3.6.1.4.1.20301.2.7.21.17.2.3.1

A port in the ufpInfoQosTable

Indexes

ufpInfoQosPortIndex ufpInfoQosVportIndex

Column Syntax OID

ufpInfoQosPortIndex

Port index

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.17.2.3.1.1

ufpInfoQosVportIndex

Vport index

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.17.2.3.1.2

ufpInfoQosMinBw

Minimum bandwidth per vport

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.17.2.3.1.3

ufpInfoQosMaxBw

Maximum bandwidth per vport

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.17.2.3.1.4

ufpInfoQosEtsPrio

Prority group assigned to vport

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.17.2.3.1.5

ufpInfoQosEtsHostCtrl

The vPort host COS control

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.17.2.3.1.6

ufpInfoQosModeRev

UFP port QOS Mode

Enumeration

Enumerated Values:

0	bw
1	ets

.1.3.6.1.4.1.20301.2.7.21.17.2.3.1.7

ufpInfoTlvstatTable

table

.1.3.6.1.4.1.20301.2.7.21.17.2.4 · 1 row entry · 2 columns

Open in standard view

The table of TLV information per port

ufpInfoTlvstatTableEntry entry .1.3.6.1.4.1.20301.2.7.21.17.2.4.1

A port in the ufpInfoTlvstatTable

Indexes

ufpInfoTlvstatPortIndex

Column	Syntax	OID
ufpInfoTlvstatPortIndex Port Index	PortNumber Textual Convention: PortNumber `Unsigned32`	`.1.3.6.1.4.1.20301.2.7.21.17.2.4.1.1`
ufpInfoTlvstatPortStatus TLV port status	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.17.2.4.1.2`

ufpInfoVlanTable

table

.1.3.6.1.4.1.20301.2.7.21.17.2.5 · 1 row entry · 6 columns

Open in standard view

The table of VLAN information

ufpInfoVlanTableEntry entry .1.3.6.1.4.1.20301.2.7.21.17.2.5.1

A VLAN in the ufpInfoVlanTable

Indexes

ufpInfoVlanIndex

Column	Syntax	OID
ufpInfoVlanIndex VLAN Index	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.20301.2.7.21.17.2.5.1.1`
ufpInfoVlanVportList Virtual ports list	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.17.2.5.1.2`
ufpInfoVlanExtPortList External ports list	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.17.2.5.1.3`
ufpInfoVlanIntPortList Internal ports list	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.17.2.5.1.4`
ufpInfoVlanUfpPortList UFP ports list	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.17.2.5.1.5`
ufpInfoVlanVmrPortList VMReady ports list	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.2.7.21.17.2.5.1.6`

ufpInfoVportTable

table

.1.3.6.1.4.1.20301.2.7.21.17.2.6 · 1 row entry · 8 columns

Open in standard view

The table of vPort information

ufpInfoVportTableEntry entry .1.3.6.1.4.1.20301.2.7.21.17.2.6.1

A vport in the ufpInfoVportTable

Indexes

ufpInfoVportPortIndex ufpInfoVportIndex

Column Syntax OID

ufpInfoVportPortIndex

Port Index

PortNumber

Textual Convention: PortNumber Unsigned32

.1.3.6.1.4.1.20301.2.7.21.17.2.6.1.1

ufpInfoVportIndex

vPort Index

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.17.2.6.1.2

ufpInfoVportState

vPort State

Enumeration

Enumerated Values:

1	disabled
2	up
3	down
4	mismatch
5	detached
6	downbyteaming

.1.3.6.1.4.1.20301.2.7.21.17.2.6.1.3

ufpInfoVportMode

vPort Mode

Enumeration

Enumerated Values:

1	access
2	trunk
3	auto
4	tunnel
5	fcoe

.1.3.6.1.4.1.20301.2.7.21.17.2.6.1.4

ufpInfoVportSvid

vPort Svid

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.17.2.6.1.5

ufpInfoVportDefaultVlan

vPort Default VLAN

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.2.7.21.17.2.6.1.6

ufpInfoVportDefaultTag

vPort Default Tag

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.20301.2.7.21.17.2.6.1.7

ufpInfoVportVlans

vPort VLANs

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.2.7.21.17.2.6.1.8

ifMainTable

table

.1.3.6.1.4.1.20301.100.27.1.4 · 1 row entry · 2 columns

Open in standard view

A list of all the interface entries in the system. 
This table contains objects which are applicable to all
types of interfaces in the system. This table is a 
proprietary extension to the standard ifTable and 
ifXTable. The index to this table has the semantics of
the MIB-2 ifIndex.

ifMainEntry entry .1.3.6.1.4.1.20301.100.27.1.4.1

An entry containing management information applicable
to a particular interface.

Indexes

ifMainIndex

Column	Syntax	OID
ifMainIndex A unique value, greater than zero, for each interface. This object is identical to the ifIndex of the standard MIB-2 ifTable.	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.20301.100.27.1.4.1.1`
ifMainPortName This is used to assign a alias to a port	SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.20301.100.27.1.4.1.9`

ibmnosPortCtrlTable

table

.1.3.6.1.4.1.20301.100.81.2.2 · 1 row entry · 6 columns

Open in standard view

A table to control the port specific parameters of the device like speed,
duplex mode, etc.

ibmnosPortCtrlEntry entry .1.3.6.1.4.1.20301.100.81.2.2.1

An entry appears in this table for each interface in the system.

Index to the table is the interface index of the port.

Indexes

ibmnosPortCtrlIndex

Column Syntax OID

ibmnosPortCtrlIndex

Interface index of the port for which the configuration
in this entry applies.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.20301.100.81.2.2.1.1

ibmnosPortCtrlMode

Speficies the mode in which the speed, duplex modes and flow control
of the interface is determined.

If set as 'auto', the hardware senses speed and negotiates with the port
on the other end of the link …

Enumerationr/w

Enumerated Values:

1	auto
2	noNegotiation

.1.3.6.1.4.1.20301.100.81.2.2.1.2

ibmnosPortCtrlDuplex

Configures interface data transfer mode as full-duplex or half-duplex.

This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'.
If the 'PortCtrlMode' is 'auto', it obtains the value '…

Enumerationr/w

Enumerated Values:

1	full
2	half
3	any

.1.3.6.1.4.1.20301.100.81.2.2.1.3

ibmnosPortCtrlSpeed

Configures interface speed.

This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'.
If the 'PortCtrlMode' is 'auto', it obtains the value 'any'

Enumerationr/w

Enumerated Values:

1	tenMBPS
2	hundredMBPS
3	oneGB
4	tenGB
5	any

.1.3.6.1.4.1.20301.100.81.2.2.1.4

ibmnosPortCtrlFlowControl

Enables / disables flow control for the interface.

This object be configured only if the 'PortCtrlMode' is 'nonegotiation'.
If the 'PortCtrlMode' is 'auto', it obtains the value from Hardware
after negot…

Enumerationr/w

Enumerated Values:

1	enable
2	disable
3	send
4	receive

.1.3.6.1.4.1.20301.100.81.2.2.1.5

ibmnosPortCtrlAlias

The port alias.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.20301.100.81.2.2.1.10

ibmnosPortCfgTable

table

.1.3.6.1.4.1.20301.100.100.2.1 · 1 row entry · 2 columns

Open in standard view

The table of port configuration in the new_configuration block.

ibmnosPortCfgTableEntry entry .1.3.6.1.4.1.20301.100.100.2.1.1

A row in the port configuration table in the new_configuration block.

Indexes

ibmnosPortCfgIndx

Column Syntax OID

ibmnosPortCfgIndx

The index of the row in port configurations table.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.100.100.2.1.1.1

ibmnosPortCfgVlanTag

VLAN tag configured for the port

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.20301.100.100.2.1.1.2

ibmnosFdbTable

table

.1.3.6.1.4.1.20301.100.100.13.5 · 1 row entry · 9 columns

Open in standard view

The table of FDB entries.

ibmnosFdbEntry entry .1.3.6.1.4.1.20301.100.100.13.5.1

A row in the FDB table

Indexes

ibmnosFdbVlan ibmnosFdbMacAddr

Column Syntax OID

ibmnosFdbVlan

The VLAN ID for the FDB entry.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.100.100.13.5.1.1

ibmnosFdbMacAddr

The MAC address for the FDB entry.

SNMPv2-TCPhysAddress

Textual Convention: SNMPv2-TCPhysAddress OctetString

.1.3.6.1.4.1.20301.100.100.13.5.1.2

ibmnosFdbMacAddrStr

The MAC address in hex format for the FDB entry. This node is added for
display purpose.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.20301.100.100.13.5.1.3

ibmnosFdbVlanId

The VLAN ID for the FDB entry. This node is added for display purpose.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.100.100.13.5.1.4

ibmnosFdbSrcPort

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.100.100.13.5.1.5

ibmnosFdbSrcTrunk

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.100.100.13.5.1.6

ibmnosFdbState

Enumeration

Enumerated Values:

1	unknown
2	forward
3	trunk

.1.3.6.1.4.1.20301.100.100.13.5.1.7

ibmnosFdbStatus

'1' if it is permanent
'0' if it is not permanent

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.100.100.13.5.1.10

ibmnosFdbClearMac

Setting this value to clear(2) clears the corresponding table entry in FDB.

Enumerationr/w

Enumerated Values:

1	ok
2	clear

.1.3.6.1.4.1.20301.100.100.13.5.1.11

hardwareTable

table

.1.3.6.1.4.1.20301.100.100.14.1 · 1 row entry · 21 columns

Open in standard view

The table with the hardware information for the switches in the fabric.

hardwareTableEntry entry .1.3.6.1.4.1.20301.100.100.14.1.1

Hardware related information for a switch in the fabric.

Indexes

hardwareSwitchNumber

Column Syntax OID

hardwareSwitchNumber

The number of the attached switch.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.100.100.14.1.1.1

hardwareSwitchRunningSwVersion

The switch software version.

OctetString

Constraints:
range: 0-128

.1.3.6.1.4.1.20301.100.100.14.1.1.2

hwTemperatureSensor1

The temperature sensor 1.

OctetString

Constraints:
range: 0-128

.1.3.6.1.4.1.20301.100.100.14.1.1.3

hwTemperatureSensor2

The temperature sensor 2.

OctetString

Constraints:
range: 0-128

.1.3.6.1.4.1.20301.100.100.14.1.1.4

hwTemperatureSensor3

The temperature sensor 3.

OctetString

Constraints:
range: 0-128

.1.3.6.1.4.1.20301.100.100.14.1.1.5

hwTemperatureSensor4

The temperature sensor 4.

OctetString

Constraints:
range: 0-128

.1.3.6.1.4.1.20301.100.100.14.1.1.6

hwTemperatureSensor5

The temperature sensor 5.

OctetString

Constraints:
range: 0-128

.1.3.6.1.4.1.20301.100.100.14.1.1.7

hwTemperatureSensor6

The temperature sensor 6.

OctetString

Constraints:
range: 0-128

.1.3.6.1.4.1.20301.100.100.14.1.1.8

hwFan1RPMValue

The Fan 1 RPM value.

OctetString

Constraints:
range: 0-128

.1.3.6.1.4.1.20301.100.100.14.1.1.14

hwFan2RPMValue

The Fan 2 RPM value.

OctetString

Constraints:
range: 0-48

.1.3.6.1.4.1.20301.100.100.14.1.1.15

hwFan3RPMValue

The Fan 3 RPM value.

OctetString

Constraints:
range: 0-48

.1.3.6.1.4.1.20301.100.100.14.1.1.16

hwFan4RPMValue

The Fan 4 RPM value.

OctetString

Constraints:
range: 0-48

.1.3.6.1.4.1.20301.100.100.14.1.1.17

hwFan5RPMValue

The Fan 5 RPM value.

OctetString

Constraints:
range: 0-48

.1.3.6.1.4.1.20301.100.100.14.1.1.18

hwFan6RPMValue

The Fan 6 RPM value.

OctetString

Constraints:
range: 0-48

.1.3.6.1.4.1.20301.100.100.14.1.1.19

hwFan7RPMValue

The Fan 7 RPM value.

OctetString

Constraints:
range: 0-48

.1.3.6.1.4.1.20301.100.100.14.1.1.20

hwFan8RPMValue

The Fan 8 RPM value.

OctetString

Constraints:
range: 0-48

.1.3.6.1.4.1.20301.100.100.14.1.1.21

hwPowerSupply1State

The Power Supply 1 state.

Enumeration

Enumerated Values:

0	off
1	on
2	absent

.1.3.6.1.4.1.20301.100.100.14.1.1.22

hwPowerSupply2State

The Power Supply 2 state.

Enumeration

Enumerated Values:

0	off
1	on
2	absent

.1.3.6.1.4.1.20301.100.100.14.1.1.23

swImage1Version

Software image1 version

OctetString

Constraints:
range: 0-128

.1.3.6.1.4.1.20301.100.100.14.1.1.24

swImage2Version

Software image2 version

OctetString

Constraints:
range: 0-128

.1.3.6.1.4.1.20301.100.100.14.1.1.25

swBootVersion

Software boot version

OctetString

Constraints:
range: 0-128

.1.3.6.1.4.1.20301.100.100.14.1.1.26

ibmnosSfpInfoTable

table

.1.3.6.1.4.1.20301.100.100.14.22 · 1 row entry · 5 columns

Open in standard view

The table of external port SFP information.

ibmnosSfpInfoTableEntry entry .1.3.6.1.4.1.20301.100.100.14.22.1

A row in the external port SFP information table.

Indexes

ibmnosSfpInfoIndx

Column Syntax OID

ibmnosSfpInfoIndx

Sfp Info index (port number)

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.20301.100.100.14.22.1.1

ibmnosSfpInfoDescription

Type Ethernet device (None(0), SFP(1), CX4(2), SFPplus(3), DAC(6))

Enumeration

Enumerated Values:

0	none
1	sfp
2	cx4
3	sfpplus
6	dac

.1.3.6.1.4.1.20301.100.100.14.22.1.2

ibmnosSfpInfoSerialNumber

Serial Number.

OctetString

Constraints:
range: 0-128

.1.3.6.1.4.1.20301.100.100.14.22.1.3

ibmnosSfpInfoPartNumber

Part Number.

OctetString

Constraints:
range: 0-128

.1.3.6.1.4.1.20301.100.100.14.22.1.4

ibmnosSfpInfoHWRevision

Hardware Revision

OctetString

Constraints:
range: 0-128

.1.3.6.1.4.1.20301.100.100.14.22.1.5