LANCOM-ACL-MGMT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
10

aclMgmtListTable

table
.1.3.6.1.4.1.2356.16.1.62.3 · 1 row entry · 10 columns
Open in standard view 
This table defines all management ACL rule-set as well as the rules
within the rule-set. To activate a specific ACL rule-set, please
refer to the 'aclMgmtActiveListName' parameter above.
aclMgmtListEntry entry .1.3.6.1.4.1.2356.16.1.62.3.1
Each entry in the table is a single rule within a given rule-set.
The rules within a rule-set are grouped together via a common
name 'aclMgmtListName'. Each rule has a specific priority
within the rule-set given by 'acl…
Indexes
aclMgmtListName aclMgmtListPriority
Column Syntax OID
aclMgmtListName
The name of a given rule-set.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.2356.16.1.62.3.1.1
aclMgmtListPriority
The priority value of a given rule within the rule-set.
Unsigned32
Constraints:
range: 1-64
 .1.3.6.1.4.1.2356.16.1.62.3.1.2
aclMgmtListIfIndex
The IfIndex to which this rule applies. By setting this to a
specific ifIndex, the rule will only apply if the management
access is coming over the given interface. If the ifIndex is
set to 0, then this rule applies to …
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2356.16.1.62.3.1.3
aclMgmtListIpAddr
The IP address associated with this entry. The IP address may be set
to 0, which means that the rule applies to all IP addresses.
Otherwise, the rule applies to all management requests which come
from a given IP addres…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2356.16.1.62.3.1.4
aclMgmtListIpNetMask
The subnet mask associated with the IP address of this entry. The
value of the mask is an IP address with all the network bits set
to 1 and all the hosts bits set to 0. Using this in conjunction
with the ipAddress giv…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2356.16.1.62.3.1.5
aclMgmtListService
The type of services that this rule applies to. By setting this
to a specific service type, the rule will only apply if the
request is coming to the switch using the particular protocol
type specified. The Service type…
AclMgmtServiceTyper/w
Textual Convention: AclMgmtServiceType Enumeration
Type Values:
0allType
1telnet
2http
3https
4snmp
5ssh
6tftp
7sntp
 .1.3.6.1.4.1.2356.16.1.62.3.1.6
aclMgmtListAction
The action to apply to the given traffic matching the rule. The
action may be to permit or deny the requested management access.
AclMgmtActionTyper/w
Textual Convention: AclMgmtActionType Enumeration
Type Values:
0permit
1deny
 .1.3.6.1.4.1.2356.16.1.62.3.1.7
aclMgmtListRowStatus
The row status variable, used according to row creation and
deletion conventions.
active(1) - Management ACL instance is active
createAndGo(4) - set to this value to create an instance
destroy(6) - set to this …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2356.16.1.62.3.1.8
aclMgmtListVlanId
The VLAN ID which can be applied to this rule. Valid VLAN ID range is 1-4093.
By setting this to a specific VLAN ID, the rule will only applies if the management
access is coming over the given interface.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2356.16.1.62.3.1.9
aclRuleIsConflict
Read-only object, which indicates whether the specified ACL rule conflicts with any other rule.
If the rule conflicts then it is recommended to remove it.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2356.16.1.62.3.1.10