LAN-EMULATION-LES-MIB Table View

This table contains all LAN Emulation
Servers this agent manages.  The LES
is one of the components in the Emulated
LAN which implements the control coordination function.
It is the address resolution server for a given ELAN.
The LES provides a facility for registering and resolving 
MAC addresses and/or route descriptors to ATM
addresses.  There can be multiple LES per ELAN 
but a LES can serve only one ELAN.

This table contains all the Control Distribute 
VCCs used by the LES to distribute control traffic
to the participating LECs.  The Control Distribute
VCC can either be point-to-point or point-to-
multipoint calls.  This table is read only if
SVCs are used and writable if PVCs are used.

This table contains the BUSs paired
with the LESs found in the lesConfTable.
The BUS (Broadcast and Unknown Server)
handles data sent by a LE client to
the broadcast MAC address, all multicast
traffic, and initial unicast frames
which are sent by a LAN Emulation Client
before the data direct target ATM address
has been resolved.

This table provides access to an ATM LAN Emulation
Server's MAC-to-ATM ARP table.  It contains entries
for unicast addressed, the broadcast address.
          
When the entry is for broadcast MAC address the 
corresponding ATM address is of a BUS.
When the entry is for unicast MAC 
address the corresponding ATM address represents
a LEC.

This table provides access to an ATM LAN Emulation
Server's RouteDescriptor-to-ATM ARP cache.
The entries in this table are set-up by the agent
or network manager depending on the entry type.
          
The Route Descriptors are presented as Segment Id 
(ring number) and Bridge number.

This table contains all LAN Emulation
clients serviced by LESs specified in
the lesConfTable.  This table can be
used to retrieve the topology of an
ELAN, in particular, the LES to LECs
mapping information.
          
An entry in this table is filled in 
by the agent when a LEC registers successfully 
with the LES.  Objects lesLecCtlDirectVpi
and lesLecCtlDirectVci can be modified  by the
network manager after creation if PVC is used.

This table contains all counters the
LES maintain.  This table is an extention
to the lesConfTable.  It provides performance
and fault counters on a per LES basis.

This table contains all LE-ARP request
related counters and error counts on 
a per LEC-LES pair basis.

This table contains error log control 
information of all LES instances.
This table is an extention to the
lesConfTable.  It is used to enable
or disable error logs for a particular
LES entry.

This table contains error logs
of the LES instances enabled
in the lesErrCtlTable.  This table
is indexed by the LES instance
index and an arbitrary integer
uniquely identifies an error
log.