Juniper-System-Clock-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
4
Rows
4
Columns
36
juniNtpClientIfTable
table.1.3.6.1.4.1.4874.2.2.56.2.2.5
·
1 row entry
·
7 columns
Lists all the NTP client's interfaces enabled for NTP. All the IP interfaces on the NTP client are by default enabled for NTP communications and can be disabled individually on each IP interface. If desired, any IP interface can be blocked from participating in NTP communication.
Each entry is per interface config for NTP.
Indexes
juniNtpClientIfRouterIndex juniNtpClientIfIfIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
juniNtpClientIfRouterIndex
The index of the router to be enabled or disabled as an NTP client.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.4874.2.2.56.2.2.5.1.1 |
||||
|
juniNtpClientIfIfIndex
The ifIndex of the interface on the NTP client.
|
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.4874.2.2.56.2.2.5.1.2 |
||||
|
juniNtpClientIfDisable
Enable/disable NTP on the interface.
|
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.4874.2.2.56.2.2.5.1.3 |
||||
|
juniNtpClientIfIsBroadcastClient
Enable/disable NTP client's interface as broadcast client. As NTP
client's broadcast interface, it receives the broadcast NTP messages from the associated servers (peers). |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.4874.2.2.56.2.2.5.1.4 |
||||
|
juniNtpClientIfIsBroadcastServer
Enable/disable NTP interface as broadcast server. As NTP server's
broadcast interface, it broadcast NTP messages on the interfac. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.4874.2.2.56.2.2.5.1.5 |
||||
|
juniNtpClientIfIsBroadcastServerVersion
NTP Server Version on the NTP broadcast server interface. Default
version is 3 |
Integer32r/w Constraints: range: 1-4 |
.1.3.6.1.4.1.4874.2.2.56.2.2.5.1.6 |
||||
|
juniNtpClientIfIsBroadcastServerDelay
Poll Interval for broadcasting NTP messages in seconds as a power of
two. Default value is 6(64s). Minimal value is 4(16s) and maximum value is 17 (36.4h). |
Integer32r/w Constraints: range: 4-17 |
.1.3.6.1.4.1.4874.2.2.56.2.2.5.1.7 |
juniNtpPeerCfgTable
table.1.3.6.1.4.1.4874.2.2.56.2.4.1
·
1 row entry
·
5 columns
This table provides information on the peers with which the NTP client has associations. The associated peers(servers) to client will be running different hosts.
Each entry provides one NTP server's configuration information. Each
peer is uniquely identified by the routerIndex of the client to which it
has to be associated and the Ip address of the remote server(peer)
itself.
…
peer is uniquely identified by the routerIndex of the client to which it
has to be associated and the Ip address of the remote server(peer)
itself.
…
Indexes
juniNtpClientIfRouterIndex juniNtpPeerCfgIpAddress
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
juniNtpPeerCfgIpAddress
Peer's IP address.
|
SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.4874.2.2.56.2.4.1.1.1 |
||||||||||||
|
juniNtpPeerCfgNtpVersion
Displays the peer server NTP software version.
|
Integer32r/w Constraints: range: 1-4 |
.1.3.6.1.4.1.4874.2.2.56.2.4.1.1.2 |
||||||||||||
|
juniNtpPeerCfgPacketSourceIfIndex
All the outgoing NTP packets' source address can be configured to one
specific interface address on the NTP peer server. This object allows to configure all the outgoing NTP packets' source IP ifIndex to … |
Integer32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.4874.2.2.56.2.4.1.1.3 |
||||||||||||
|
juniNtpPeerCfgIsPreferred
Select whether this NTP server is a preferred time source to the
NTP client to which it has association. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.4874.2.2.56.2.4.1.1.4 |
||||||||||||
|
juniNtpPeerCfgRowStatus
Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this ta… |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.4874.2.2.56.2.4.1.1.5 |
juniNtpPeerTable
table.1.3.6.1.4.1.4874.2.2.56.2.4.2
·
1 row entry
·
20 columns
This table provides information on the peers with which the NTP client has associations. The associated peers (servers) to client will be running different hosts.
Each entry provides one NTP server (peer) information. Each peer is
uniquely identified by the routerIndex of the client to which it has to
be associated and the Ip address of the remote server (peer) itself.
…
uniquely identified by the routerIndex of the client to which it has to
be associated and the Ip address of the remote server (peer) itself.
…
Indexes
juniNtpClientIfRouterIndex juniNtpPeerCfgIpAddress
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
juniNtpPeerState
Displays the peer server association state to NTP client on the system.
Bit Peer State Description --- ---------- ------------------------------------------------ 0 master Means NTP cl… |
OctetString Constraints: range: 1-1 |
.1.3.6.1.4.1.4874.2.2.56.2.4.2.1.1 |
||||||
|
juniNtpPeerStratumNumber
Displays the peer server system clock stratum number.
|
Integer32 Constraints: range: 1-255 |
.1.3.6.1.4.1.4874.2.2.56.2.4.2.1.2 |
||||||
|
juniNtpPeerAssociationMode
Displays the peer server association mode to the NTP client on the
router. broadcastServer - Broadcast only NTP messages. multicastServer - Broadcast only NTP messages for IGMP multicast Ne… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.4874.2.2.56.2.4.2.1.3 |
||||||
|
juniNtpPeerBroadcastInterval
Displays the broadcast time interval of the NTP time messages from the
peer when the peer is enabled either as broadcast server or multicast server. |
secondsSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.4874.2.2.56.2.4.2.1.4 |
||||||
|
juniNtpPeerPolledInterval
Displays the time interval at which peer will be polled by NTP client
with which peer has associations when it is enabled as unicast server. |
secondsSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.4874.2.2.56.2.4.2.1.5 |
||||||
|
juniNtpPeerPollingInterval
Displays the time interval at which peer will poll the servers with
which peer has associations when it is enabled as unicast server. |
secondsSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.4874.2.2.56.2.4.2.1.6 |
||||||
|
juniNtpPeerDelay
Displays the peer server broadcast delay.
|
secondsJuniNtpClockSignedTime Textual Convention: JuniNtpClockSignedTime OctetStringType Constraints: range: 0..11 |
.1.3.6.1.4.1.4874.2.2.56.2.4.2.1.7 |
||||||
|
juniNtpPeerDispersion
Displays the peer server dispersion.
|
secondsJuniNtpClockUnsignedTime Textual Convention: JuniNtpClockUnsignedTime OctetStringType Constraints: range: 0..11 |
.1.3.6.1.4.1.4874.2.2.56.2.4.2.1.8 |
||||||
|
juniNtpPeerOffsetError
Displays the peer server offset error.
|
secondsJuniNtpClockSignedTime Textual Convention: JuniNtpClockSignedTime OctetStringType Constraints: range: 0..11 |
.1.3.6.1.4.1.4874.2.2.56.2.4.2.1.9 |
||||||
|
juniNtpPeerReachability
Displays the peer reachability status. An 8-bit number that shows
whether or not the peer server responded to the last eight requests to the server to which it has association; one indicates a response, zero indicates … |
OctetString Constraints: range: 1-1 |
.1.3.6.1.4.1.4874.2.2.56.2.4.2.1.10 |
||||||
|
juniNtpPeerRootDelay
Displays the peer server root delay.
|
secondsJuniNtpClockSignedTime Textual Convention: JuniNtpClockSignedTime OctetStringType Constraints: range: 0..11 |
.1.3.6.1.4.1.4874.2.2.56.2.4.2.1.11 |
||||||
|
juniNtpPeerRootDispersion
Displays the peer server root dispersion.
|
secondsJuniNtpClockUnsignedTime Textual Convention: JuniNtpClockUnsignedTime OctetStringType Constraints: range: 0..11 |
.1.3.6.1.4.1.4874.2.2.56.2.4.2.1.12 |
||||||
|
juniNtpPeerRootSyncDistance
Displays the peer server synchronization distance. Measure of the
total time error since the update in the path to the stratum 1 server. |
secondsJuniNtpClockSignedTime Textual Convention: JuniNtpClockSignedTime OctetStringType Constraints: range: 0..11 |
.1.3.6.1.4.1.4874.2.2.56.2.4.2.1.13 |
||||||
|
juniNtpPeerRootTime
Last time at which the stratum 1 server sent clock update reply to the
this peer server. |
secondsJuniNtpTimeStamp Textual Convention: JuniNtpTimeStamp OctetStringType Constraints: range: 0..21 |
.1.3.6.1.4.1.4874.2.2.56.2.4.2.1.14 |
||||||
|
juniNtpPeerRootTimeUpdateServer
IP address of the stratum 1 server last updated the peer server.
|
SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.4874.2.2.56.2.4.2.1.15 |
||||||
|
juniNtpPeerReceiveTime
If the peer server is either broadcast or multicast server, this will
represent time stamp at which NTP client received the broadcast message. If it is unicast server, it represents the time stamp at which the peer has … |
JuniNtpTimeStamp Textual Convention: JuniNtpTimeStamp OctetStringType Constraints: range: 0..21 |
.1.3.6.1.4.1.4874.2.2.56.2.4.2.1.16 |
||||||
|
juniNtpPeerTransmitTime
If the peer server is either broadcast or multicast server, this will
represent time stamp at which peer sent the broadcast message. If it is unicast server, it represents the time stamp at which the NTP client has rec… |
JuniNtpTimeStamp Textual Convention: JuniNtpTimeStamp OctetStringType Constraints: range: 0..21 |
.1.3.6.1.4.1.4874.2.2.56.2.4.2.1.17 |
||||||
|
juniNtpPeerRequestTime
For unicast server, it represents the time stamp at which the system
client sent NTP request to the peer. |
JuniNtpTimeStamp Textual Convention: JuniNtpTimeStamp OctetStringType Constraints: range: 0..21 |
.1.3.6.1.4.1.4874.2.2.56.2.4.2.1.18 |
||||||
|
juniNtpPeerPrecision
Length of the clock tick (interrupt interval) of the server's clock.
|
secondsJuniNtpClockSignedTime Textual Convention: JuniNtpClockSignedTime OctetStringType Constraints: range: 0..11 |
.1.3.6.1.4.1.4874.2.2.56.2.4.2.1.19 |
||||||
|
juniNtpPeerLastUpdateTime
Displays the seconds since the last update from the NTP server
|
secondsSNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.4874.2.2.56.2.4.2.1.20 |
.1.3.6.1.4.1.4874.2.2.56.2.4.3
·
1 row entry
·
4 columns
The following table contains NTP state variables used by the NTP clock
filter and selection algorithms. This table depicts a shift register.
Each stage in the shift register is a 3-tuple consisting of the measured
clock offset, measured clock delay and measured clock dispersion
associated with a single observation.
The NTP clock-filter and selection algorithms are designed to minimize
the error in the calculated time by using the objects values in the
filter table.
Each entry corresponds to one stage of the shift register and reading
one set of values clock delay, clock offset and clock dispersion.
Entries are automatically created whenever a peer is configured and
de…
one set of values clock delay, clock offset and clock dispersion.
Entries are automatically created whenever a peer is configured and
de…
Indexes
juniNtpPeerCfgIpAddress juniNtpPeerFilterIndex
| Column | Syntax | OID |
|---|---|---|
|
juniNtpPeerFilterIndex
An integer value in the specified range that is used to index into the
table. The size of the table is fixed at 8. Each entry identifies a particular reading of the clock filter variables in the shift register. … |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.4874.2.2.56.2.4.3.1.1 |
|
juniNtpPeerFilterOffset
The offset of the peer clock relative to the system clock in seconds.
|
secondsJuniNtpClockSignedTime Textual Convention: JuniNtpClockSignedTime OctetStringType Constraints: range: 0..11 |
.1.3.6.1.4.1.4874.2.2.56.2.4.3.1.2 |
|
juniNtpPeerFilterDelay
Roundtrip delay of the peer clock relative to the system clock over the
network path between them, in seconds. This variable can take on both positive and negative values, depending on clock precision and skew-error ac… |
secondsJuniNtpClockSignedTime Textual Convention: JuniNtpClockSignedTime OctetStringType Constraints: range: 0..11 |
.1.3.6.1.4.1.4874.2.2.56.2.4.3.1.3 |
|
juniNtpPeerFilterDispersion
The maximum error of the peer clock relative to the system clock over
the network path between them, in seconds. Only positive values greater than zero are possible. |
secondsJuniNtpClockUnsignedTime Textual Convention: JuniNtpClockUnsignedTime OctetStringType Constraints: range: 0..11 |
.1.3.6.1.4.1.4874.2.2.56.2.4.3.1.4 |