Juniper-FRACTIONAL-T1-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
7

juniFt1IfTable

table
.1.3.6.1.4.1.4874.2.2.6.1.2 · 1 row entry · 7 columns
Open in standard view 
This table contains entries for FT1 interfaces present in the system.
juniFt1IfEntry entry .1.3.6.1.4.1.4874.2.2.6.1.2.1
Each entry describes the characteristics of an FT1 interface.
Creating/deleting entries in this table causes corresponding entries for
be created /deleted in ifTable/ifXTable/juniIfTable.
Indexes
juniFt1IfIndex
Column Syntax OID
juniFt1IfIndex
The ifIndex of the FT1 interface. When creating entries in this table,
suitable values for this object are determined by reading
juniFt1NextIfIndex.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4874.2.2.6.1.2.1.1
juniFt1IfRowStatus
Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy

To create an entry in this …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.6.1.2.1.2
juniFt1IfLowerIfIndex
The ifIndex of a DS1 interface over which this FT1 interface is to be
layered. A value of zero indicates no layering. An implementation may
choose to require that a nonzero value be configured at entry creation.
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.4874.2.2.6.1.2.1.3
juniFt1IfTimeSlotMap
A bitmap representing the DS0s on the underlying DS1 interface that
have been allocated to this FT1 interface.
Juniper-TCJuniTimeSlotMapr/w
Textual Convention: Juniper-TCJuniTimeSlotMap OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.6.1.2.1.4
juniFt1IfTimeSlotRate
Data rate per time slot allocated to this FT1 interface.
Enumerationr/w
Enumerated Values:
0nx56kbps
1nx64kbps
 .1.3.6.1.4.1.4874.2.2.6.1.2.1.5
juniFt1IfDataPolarity obsolete
Obsolete. Polarity of data transmitted on this FT1 interface.
Inverted data is used for certain line coding configurations to ensure
sufficient one's density for timing recovery by the remote end.
Enumerationr/w
Enumerated Values:
0normal
1inverted
 .1.3.6.1.4.1.4874.2.2.6.1.2.1.6
juniFt1IfLoopbackConfig
Selects loopback configuration. loop(1) causes received data to be
looped back out the transmitter.
Enumerationr/w
Enumerated Values:
0noLoop
1loop
 .1.3.6.1.4.1.4874.2.2.6.1.2.1.7