Juniper-DOS-PROTECTION-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
36

juniDosProtectionScfdsProtocolTable

table
.1.3.6.1.4.1.4874.2.2.80.1.1.13 · 1 row entry · 6 columns
Open in standard view 
The information for the DOS protection control protocols.
juniDosProtectionScfdsProtocolEntry entry .1.3.6.1.4.1.4874.2.2.80.1.1.13.1
The information for an individual DOS protection control
protocol.
Indexes
juniDosProtectionScfdsProtocolIndex
Column Syntax OID
juniDosProtectionScfdsProtocolIndex
The control protocol value for this entry.
JuniDosProtectionProtocolType
Textual Convention: JuniDosProtectionProtocolType Enumeration
Type Values:
0pppEchoRequest
1ppEchoReply
2pppEchoReplyFast
3pppControl
4atmControl
5atmOam
6atmDynamicIf
7atmInverseArp
8frameRelayControl
9frameRelayArp
10pppoeControl
11pppoePppConfig
12ethernetArpMiss
13ethernetArp
14ethernetFcBasedArp
15ethernetLacp
16ethernetOam
17ethernetDynamicIf
18ethernetPppTerminate
19slepSlarp
20slepSlarpReplyFast
21mplsTtlOnReceive
22mplsTtlOnTransmit
23mplsMtuExceeded
24itmL2tpControl
25flisInPayload
26flisInPayloadUpdateTable
27dhcpExternal
28ipOsi
29ipTtlExpired
30ipOptionsOther
31ipOptionsRouterAlert
32ipMulticastBroadcastOther
33ipMulticastDhcpSc
34ipMulticastControlSc
35ipMulticastControlIc
36ipMulticastVrrp
37ipMulticastCacheMiss
38ipMulticastCacheMissAutoReply
39ipMulticastWrongIf
40ipLocalDhcpSc
41ipLocalDhcpIc
42ipLocalIcmpEcho
43ipLocalIcmpOther
44ipLocalLDP
45ipLocalBgp
46ipLocalOspf
47ipLocalRsvp
48ipLocalPim
49ipLocalCops
50ipLocalL2tpControlSc
51ipLocalL2tpControlIc
52ipLocalOther
53ipLocalDemuxMiss
54ipRouteToSrpEthernet
55ipRouteNoRoute
56ipNull0Interface
57ipNormalPathMtu
58ipNeighborDiscovery
59ipNeighborDiscoveryMiss
60ipSearchError
61ipMld
62ipLocalPimAssert
63ipLocalBfd
64ipFastBfd
65ipLocalFastBfd
66ipIke
67ipReassembly
68ipLocalIcmpFragment
69ipLocalFragment
70ipAppClassifierHttpRedirect
71ipMulticastDhcpIc
72dhcpTesterIc
73atmDynamicIfPppData
74ipLocalLspPing
 .1.3.6.1.4.1.4874.2.2.80.1.1.13.1.1
juniDosProtectionScfdsProtocolThreshold
The threshold in packets per second for this control protocol.
This is the rate at which a flow for this protocol is considered
suspicious. Setting this object to zero will have the affect of
excusing this protocol from…
Unsigned32r/w
Constraints:
range: 0-0
range: 3-65535
 .1.3.6.1.4.1.4874.2.2.80.1.1.13.1.2
juniDosProtectionScfdsProtocolLowThreshold
The low threshold in packets per second for this control protocol .
This is the rate at which a flow must fall below to in order return
to the normal state, after having been marked suspicious. A
low threshold of zero …
Unsigned32r/w
Constraints:
range: 0-32767
 .1.3.6.1.4.1.4874.2.2.80.1.1.13.1.3
juniDosProtectionScfdsProtocolBackoffTime
The backoff time in seconds. A flow which is considered suspicious will
be returned to normal after this amount of time regardless of the current
rate of the flow. A backoff time of 0 disables this functionality.
Unsigned32r/w
Constraints:
range: 10-1000
range: 0-0
 .1.3.6.1.4.1.4874.2.2.80.1.1.13.1.4
juniDosProtectionScfdsProtocolState
The current state of the protocol. This object will return inTrouble(2)
if any module in the system has reported that the protocol is currently
being watched for suspicious flows. If no module reports that this protoco…
JuniDosProtectionProtocolState
Textual Convention: JuniDosProtectionProtocolState Enumeration
Type Values:
1ok
2inTrouble
 .1.3.6.1.4.1.4874.2.2.80.1.1.13.1.5
juniDosProtectionScfdsProtocolTransitions
The number of transitions to 'inTrouble' that this control protocol
has made.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.80.1.1.13.1.6

juniDosProtectionDpgTable

table
.1.3.6.1.4.1.4874.2.2.80.1.2.1 · 1 row entry · 6 columns
Open in standard view 
The information for a dos-protection-group. A 
dos-protection-group defines a set of parameters that
manage the handling of control protocols on the
router.
juniDosProtectionDpgEntry entry .1.3.6.1.4.1.4874.2.2.80.1.2.1.1
The information for an individual dos-protection-group.
Indexes
juniDosProtectionDpgIndex
Column Syntax OID
juniDosProtectionDpgIndex
The dos-protection-group-name for this entry.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.4874.2.2.80.1.2.1.1.1
juniDosProtectionDpgRowStatus
Controls creation/deletion of entries in this table.
Only the values 'createAndGo' and 'destroy' may be SET.
When read this always returns a value of active
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.80.1.2.1.1.2
juniDosProtectionDpgCanned
Sets the default values based for the dos-protection-group
based on the values from the canned group. Can only be used
to set a different group. Using the current group will result
in no changes to the dos-protection-g…
JuniDosProtectionProtocolCannedTyper/w
Textual Convention: JuniDosProtectionProtocolCannedType Enumeration
Type Values:
0default
1enetAccess
2atmAccess
3frame
4uplink
 .1.3.6.1.4.1.4874.2.2.80.1.2.1.1.3
juniDosProtectionDpgRevert
Revert this dos-protection-group to the canned values of the
associated canned group by setting this object to
revert(1). Reading this object will always return a value
of no-revert(1)
Enumerationr/w
Enumerated Values:
0no-revert
1revert
 .1.3.6.1.4.1.4874.2.2.80.1.2.1.1.4
juniDosProtectionDpgModified
When true is returned, some protocol or priority associated
with this dos-protection-group, has been modified from the
canned values associated with the group. When false is returned
all settings associated with this …
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4874.2.2.80.1.2.1.1.5
juniDosProtectionDpgReferences
The number of references for this dos-protection-group.
References include the number of interfaces currently
associated with the group, as well as the number of profile
references.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4874.2.2.80.1.2.1.1.6

juniDosProtectionDpgProtocolTable

table
.1.3.6.1.4.1.4874.2.2.80.1.2.2 · 1 row entry · 10 columns
Open in standard view 
The information for the dos-protection-group control protocol 
table.
juniDosProtectionDpgProtocolEntry entry .1.3.6.1.4.1.4874.2.2.80.1.2.2.1
The information for an individual dos-protection-group control
protocol entry.
Indexes
juniDosProtectionDpgProtocolName juniDosProtectionDpgProtocolProtocol
Column Syntax OID
juniDosProtectionDpgProtocolName
The dos-protection-group name for this entry.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.4874.2.2.80.1.2.2.1.1
juniDosProtectionDpgProtocolProtocol
The dos-protection-group control protocol for this entry.
JuniDosProtectionProtocolType
Textual Convention: JuniDosProtectionProtocolType Enumeration
Type Values:
0pppEchoRequest
1ppEchoReply
2pppEchoReplyFast
3pppControl
4atmControl
5atmOam
6atmDynamicIf
7atmInverseArp
8frameRelayControl
9frameRelayArp
10pppoeControl
11pppoePppConfig
12ethernetArpMiss
13ethernetArp
14ethernetFcBasedArp
15ethernetLacp
16ethernetOam
17ethernetDynamicIf
18ethernetPppTerminate
19slepSlarp
20slepSlarpReplyFast
21mplsTtlOnReceive
22mplsTtlOnTransmit
23mplsMtuExceeded
24itmL2tpControl
25flisInPayload
26flisInPayloadUpdateTable
27dhcpExternal
28ipOsi
29ipTtlExpired
30ipOptionsOther
31ipOptionsRouterAlert
32ipMulticastBroadcastOther
33ipMulticastDhcpSc
34ipMulticastControlSc
35ipMulticastControlIc
36ipMulticastVrrp
37ipMulticastCacheMiss
38ipMulticastCacheMissAutoReply
39ipMulticastWrongIf
40ipLocalDhcpSc
41ipLocalDhcpIc
42ipLocalIcmpEcho
43ipLocalIcmpOther
44ipLocalLDP
45ipLocalBgp
46ipLocalOspf
47ipLocalRsvp
48ipLocalPim
49ipLocalCops
50ipLocalL2tpControlSc
51ipLocalL2tpControlIc
52ipLocalOther
53ipLocalDemuxMiss
54ipRouteToSrpEthernet
55ipRouteNoRoute
56ipNull0Interface
57ipNormalPathMtu
58ipNeighborDiscovery
59ipNeighborDiscoveryMiss
60ipSearchError
61ipMld
62ipLocalPimAssert
63ipLocalBfd
64ipFastBfd
65ipLocalFastBfd
66ipIke
67ipReassembly
68ipLocalIcmpFragment
69ipLocalFragment
70ipAppClassifierHttpRedirect
71ipMulticastDhcpIc
72dhcpTesterIc
73atmDynamicIfPppData
74ipLocalLspPing
 .1.3.6.1.4.1.4874.2.2.80.1.2.2.1.2
juniDosProtectionDpgProtocolBurst
The burst in packets for this control protocol in this
dos-protection-group.
Unsigned32r/w
Constraints:
range: 32-65535
range: 0-0
 .1.3.6.1.4.1.4874.2.2.80.1.2.2.1.3
juniDosProtectionDpgProtocolDropProbability
The drop probability for suspect packets for this
control protocol in this dos-protection-group. This is
probability that a packet belonging to a suspicious
flow will be dropped. A drop probability of less than
100 ind…
Unsigned32r/w
Constraints:
range: 10-100
 .1.3.6.1.4.1.4874.2.2.80.1.2.2.1.4
juniDosProtectionDpgProtocolRate
The rate in packets per second for this control protocol in
this dos-protection-group.
Unsigned32r/w
Constraints:
range: 0-0
range: 64-65535
 .1.3.6.1.4.1.4874.2.2.80.1.2.2.1.5
juniDosProtectionDpgProtocolSkipPriorityRateLimiter
When set to enable, this control protocol in this
dos-protection-group will skip the priority rate limiter.
When set to disable, the protocol will not skip the priority
rate-limiter.
Juniper-TCJuniEnabler/w
Textual Convention: Juniper-TCJuniEnable Enumeration
Type Values:
0disable
1enable
 .1.3.6.1.4.1.4874.2.2.80.1.2.2.1.6
juniDosProtectionDpgProtocolWeight
The weight of this control protocol against others of the
same priority in this dos-protection-group. The weight
is used to determine the minimum rate and burst
for the protocol within the priority group.
Unsigned32r/w
Constraints:
range: 100-500
 .1.3.6.1.4.1.4874.2.2.80.1.2.2.1.7
juniDosProtectionDpgProtocolPriority
The priority for the control protocol. Packets of this control
protocol on interfaces referencing this dos-protection-group will
be categorized into the priority indicated.
JuniDosProtectionProtocolPriorityTyper/w
Textual Convention: JuniDosProtectionProtocolPriorityType Enumeration
Type Values:
0hiGreen
1hiYellow
2loGreen
3loYellow
4dataPath
 .1.3.6.1.4.1.4874.2.2.80.1.2.2.1.8
juniDosProtectionDpgProtocolModified
When true is returned, the values for this control protocol
in this dos-protection-group have been modified from the
canned values associated with the group. When false is returned
all settings associated with this con…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4874.2.2.80.1.2.2.1.9
juniDosProtectionDpgProtocolDestination
The destination processor for packets of this control protocol.
JuniDosProtectionControlProcessorDestination
Textual Convention: JuniDosProtectionControlProcessorDestination Enumeration
Type Values:
0ic
1sc
2dataPath
 .1.3.6.1.4.1.4874.2.2.80.1.2.2.1.10

juniDosProtectionDpgPriorityTable

table
.1.3.6.1.4.1.4874.2.2.80.1.2.3 · 1 row entry · 6 columns
Open in standard view 
The information for a dos-protection-group priority table.
juniDosProtectionDpgPriorityEntry entry .1.3.6.1.4.1.4874.2.2.80.1.2.3.1
The information for an individual dos-protection-group priority
table
Indexes
juniDosProtectionDpgPriorityName juniDosProtectionDpgPriorityPriority
Column Syntax OID
juniDosProtectionDpgPriorityName
The dos-proteciton-group name for this entry.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.4874.2.2.80.1.2.3.1.1
juniDosProtectionDpgPriorityPriority
The priority for this entry.
JuniDosProtectionPriorityType
Textual Convention: JuniDosProtectionPriorityType Enumeration
Type Values:
0hiGreenFcIc
1hiYellowFcIc
2loGreenFcIc
3loYellowFcIc
4hiGreenFcSc
5hiYellowFcSc
6loGreenFcSc
7loYellowFcSc
 .1.3.6.1.4.1.4874.2.2.80.1.2.3.1.2
juniDosProtectionDpgPriorityBurst
The burst in packets for this priority in this
dos-protection-group.
Unsigned32r/w
Constraints:
range: 32-65535
range: 0-0
 .1.3.6.1.4.1.4874.2.2.80.1.2.3.1.3
juniDosProtectionDpgPriorityOverSubscriptionFactor
The over-subscription factor for this priority in this
dos-protection-group. This is used when calculating
the minimum rates for control protocols that use this priority.
Unsigned32r/w
Constraints:
range: 100-1000
 .1.3.6.1.4.1.4874.2.2.80.1.2.3.1.4
juniDosProtectionDpgPriorityRate
The rate in packets per second for this priority in
this dos-protection-group.
Unsigned32r/w
Constraints:
range: 64-65535
range: 0-0
 .1.3.6.1.4.1.4874.2.2.80.1.2.3.1.5
juniDosProtectionDpgPriorityModified
When true is returned, the values for this priority
in this dos-protection-group have been modified from the
canned values associated with the group. When false is returned
all settings associated with this priority in…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4874.2.2.80.1.2.3.1.6

juniDosProtectionDpgAttachTable

table
.1.3.6.1.4.1.4874.2.2.80.1.2.4 · 1 row entry · 4 columns
Open in standard view 
The information for the DOS protection attachment table.
juniDosProtectionDpgAttachEntry entry .1.3.6.1.4.1.4874.2.2.80.1.2.4.1
The information for an individual DOS protection attachment entry.
Indexes
juniDosProtectionDpgAttachIndex
Column Syntax OID
juniDosProtectionDpgAttachIndex
The interface index for the attachment.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4874.2.2.80.1.2.4.1.1
juniDosProtectionDpgAttachRowStatus
Controls creation/deletion of entries in this table. Only the
values 'createAndGo' and 'destroy' may be SET.
When read this always returns a value of active
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.80.1.2.4.1.2
juniDosProtectionDpgAttachName
The dos-protection-group for this entry. This is the
dos-protection-group that is use by the interface.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.4874.2.2.80.1.2.4.1.3
juniDosProtectionDpgAttachConfigured
Indicates the configured status of the attachment. This object
returns true when the attachment was statically
configured, and returns false when the attachment
was made via a profile attachment.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4874.2.2.80.1.2.4.1.4

juniDosProtectionDpgProfileTable

table
.1.3.6.1.4.1.4874.2.2.80.1.2.5 · 1 row entry · 4 columns
Open in standard view 
The information for the DOS protection profile table.
juniDosProtectionDpgProfileEntry entry .1.3.6.1.4.1.4874.2.2.80.1.2.5.1
The information for an individual DOS protection profile entry.
Indexes
juniDosProtectionDpgProfileProfileId juniDosProtectionDpgProfileLayerId
Column Syntax OID
juniDosProtectionDpgProfileProfileId
The profile ID for the profile entry. The profile ID
identifies which profile is being accessed. A value for this
identifier is determined by locating or creating a profile name
in the juniProfileNameTable
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.80.1.2.5.1.1
juniDosProtectionDpgProfileLayerId
The layer ID for the profile entry. The layer ID indicates
which interface type is being accessed.
JuniDosProtectionLayerId
Textual Convention: JuniDosProtectionLayerId Enumeration
Type Values:
0ip
1ppp
6ethernet
11atm1483
17pppoe
19bridge1483
35vlan
50ipv6
 .1.3.6.1.4.1.4874.2.2.80.1.2.5.1.2
juniDosProtectionDpgProfileRowStatus
Controls creation/deletion of entries in this table. Only the
values 'createAndGo' and 'destroy' may be SET. When read this
always returns a value of active
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.80.1.2.5.1.3
juniDosProtectionDpgProfileName
The dos-protection-group that is associated with this
profile/interface-type. This profile will be attached
when dynamic instances of the interface type are
created that reference the specific profile.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.4874.2.2.80.1.2.5.1.4