JUNIPER-SECURE-ACCESS-PORT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
13

jnxSecAccessPortVlanTable

table
.1.3.6.1.4.1.2636.3.40.1.2.1.1.1 · 1 row entry · 3 columns
Open in standard view 
A table provides the mechanism to control DHCP Snooping
and Dynamic ARP Inspection per VLAN. When a VLAN is created 
	in a device supporting this table, a corresponding entry will 
	be added to this table.
jnxSecAccessPortVlanEntry entry .1.3.6.1.4.1.2636.3.40.1.2.1.1.1.1
A row instance contains whether DHCP Snooping and Dynamic
ARP Inspection at each existing VLAN is enabled or disabled.
Indexes
jnxSecAccessVlanName
Column Syntax OID
jnxSecAccessVlanName
This object indicates the VLAN name on which Dhcp Snooping
feature and Dynamic ARP Inspection is enabled.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.2636.3.40.1.2.1.1.1.1.1
jnxSecAccessVlanDhcpSnoopStatus
This object indicates whether Dhcp Snooping is
enabled in this VLAN.

If this object is 'true', Dhcp Snooping is enabled in the
specified VLAN.

If this object is 'false', Dhcp Snooping is …
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2636.3.40.1.2.1.1.1.1.2
jnxSecAccessVlanDAIStatus
This object indicates whether Dynamic ARP Inspection is
enabled in this VLAN.

If this object is 'true', Dynamic ARP Inspection is enabled.

If this object is 'false', Dynamic ARP Inspection…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2636.3.40.1.2.1.1.1.1.3

jnxSecAccessPortIfTable

table
.1.3.6.1.4.1.2636.3.40.1.2.1.1.2 · 1 row entry · 6 columns
Open in standard view 
The table contains the trust state and rate limit of each interface
for DHCP Snooping purpose. The table also contains information on MAC 
address limit feature for each interface capable of this feature.
This table also specifies whether IP source guard and MAC source 
guard are enabled on each interface.
jnxSecAccessPortIfEntry entry .1.3.6.1.4.1.2636.3.40.1.2.1.1.2.1
A table entry contains the trust state and rate limit of an
interface, MAC address limit for that Interface. It also contains
the action to be undertaken if MAC address limit is exceeded. A table
entry specifies whethe…
Indexes
IF-MIBifIndex
Column Syntax OID
jnxSecAccessdsIfTrustState
This object indicates whether the interface is trusted for
DHCP Snooping purpose.

If this object is 'true', the interface is trusted.
DHCP packets coming to this interface will be forwarded without
che…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2636.3.40.1.2.1.1.2.1.1
jnxSecAccessdsIfRateLimit
This object indicates rate limit value for DHCP Snooping purpose.
If the value of this object is 0, no rate limit is applied for DHCP
traffic at this interface.
packets per secondSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2636.3.40.1.2.1.1.2.1.2
jnxSecAccessIfMacLimit
This object specifies the threshold limit for the number of
MAC address entries on this interface.

When the instance value of this object is set to 0, no threshold
limit will be applied for this interf…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2636.3.40.1.2.1.1.2.1.3
jnxSecAccessIfMacLimitExceed
This object specifies the action to be taken by the system for this
interface while the number of MAC addresses has exceeded the value
of jnxIfMacLimit.

This object value is only effective when the corr…
JnxMacLimitExceededAction
Textual Convention: JnxMacLimitExceededAction Enumeration
Type Values:
1none
2drop
3alarm
4shutdown
 .1.3.6.1.4.1.2636.3.40.1.2.1.1.2.1.4
jnxSecAccessIfIpSrcGuardStatus
This object indicates whether IP Source Guard is enabled on
the specified interface.

If this object is 'true', then IP Source Guard is enabled on the
specified interface.

If this object is …
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2636.3.40.1.2.1.1.2.1.5
jnxSecAccessIfMacSrcGuardStatus
This object indicates whether Mac Source Guard is enabled on
the specified interface.

If this object is 'true', then Mac Source Guard is enabled on the
specified interface.

If this object…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2636.3.40.1.2.1.1.2.1.6

jnxStormCtlTable

table
.1.3.6.1.4.1.2636.3.40.1.2.1.1.3 · 1 row entry · 4 columns
Open in standard view 
Storm control monitors each type of traffic level on an interface. 
If traffic level exceeds the threshold value(rising threshold),
switch will drop all packets of that type until traffic level drops 
to the threshold level (falling threshold). If traffic rate for a 
particular type exceeds the rising threshold, action will be taken 
to shutdown or add configured filter on the port.
          
This table describes the traffic type for each interface, the rising 
threshold, falling threshold and the action to be taken if the traffic
exceeds the rising threshold.
jnxStormCtlEntry entry .1.3.6.1.4.1.2636.3.40.1.2.1.1.3.1
An entry contains the interface index,traffic type for the interface,
the rising threshold, falling threshold and the action to be taken
if the traffic exceeds the rising threshold.
Indexes
IF-MIBifIndex jnxStormCtlIfTrafficType
Column Syntax OID
jnxStormCtlIfTrafficType
This object specifies the traffic type on the particular
interface. Value 1 specifies that it is broadcast traffic,
value 2 specifies that it is multicast traffic and
value 3 specifies that it is unicast traffic.
Enumeration
Enumerated Values:
1broadcast
2multicast
3unicast
 .1.3.6.1.4.1.2636.3.40.1.2.1.1.3.1.1
jnxStormCtlRisingThreshold
This object specifies the rising threshold value in packets
per second. The storm control action is occurs when the traffic
exceeds this threshold value.
packets per secondSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2636.3.40.1.2.1.1.3.1.2
jnxStormCtlFallingThreshold
This object specifies the falling threshold value in packets
per second. The storm control action ceases when the traffic
drops to this threshold value.
packets per secondSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2636.3.40.1.2.1.1.3.1.3
jnxStormCtlAction
This object specifies the action to be taken, when traffic exceeds
rising threshold value. Value 1 specifies that the action taken is
to shutdown the port. Value 2 specifies that the action taken is to
apply a policy…
Enumeration
Enumerated Values:
1shutdown
2filter
 .1.3.6.1.4.1.2636.3.40.1.2.1.1.3.1.4