JUNIPER-ANALYZER-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
12

jnxAnalyzerTable

table
.1.3.6.1.4.1.2636.3.40.1.1.1.1.1 · 1 row entry · 4 columns
Open in standard view 
Network traffic passing through ports is analyzed by sending a
copy of the traffic to another port on the same or different switch. 
This table contains the analyzer parameters.
jnxAnalyzerEntry entry .1.3.6.1.4.1.2636.3.40.1.1.1.1.1.1
A row instance contains the Analyzer Name, Analyzer Status, Mirroring
Ratio, Loss Priority.
Indexes
jnxAnalyzerName
Column Syntax OID
jnxAnalyzerName
This object identifies a unique Analyzer configured on the switch.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.2636.3.40.1.1.1.1.1.1.1
jnxAnalyzerStatus obsolete
This object identifies whether the mirroring associated with a
particular analyzer is enabled or disabled.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2636.3.40.1.1.1.1.1.1.2
jnxMirroringRatio
This object will specify the mirroring ratio. User can configure
the analyzer to mirror only one out of X packets [1:X packets] in
the ingress/egress side based on whether the port is configured for
ingress or egress …
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2636.3.40.1.1.1.1.1.1.3
jnxLossPriority
The analyzer port may be congested when the number of
packets exceeds the bandwidth of the analyzer port. So the
loss-priority parameter is enabled. The switched packets
will not get affected by this. The value 0 cor…
Enumeration
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.2636.3.40.1.1.1.1.1.1.4

jnxAnalyzerInputTable

table obsolete
.1.3.6.1.4.1.2636.3.40.1.1.1.1.2 · 1 row entry · 3 columns
Open in standard view 
An analyzer Session is an association of several source ports to 
a destination port.A range or series of ports can be mirrored in
a session.
jnxAnalyzerInputEntry entry .1.3.6.1.4.1.2636.3.40.1.1.1.1.2.1
An Entry is created for each Input Source port.
Indexes
jnxAnalyzerName jnxAnalyzerInputValue
Column Syntax OID
jnxAnalyzerInputValue obsolete
This identifies each different analyzer input source.

If the value of jnxAnalyzerInputType is 1 then jnxAnalyzerInputValue
refers to the input source Interface Name.

If the value of jnxAnal…
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.2636.3.40.1.1.1.1.2.1.1
jnxAnalyzerInputOption obsolete
A source port is a switch port that is been mirrored. It can be
mirrored based either on Ingress(received) traffic or egress
(transmitted) traffic.

The goal of receive (or ingress) Analyzer is to monitor…
Enumeration
Enumerated Values:
1ingress
2egress
 .1.3.6.1.4.1.2636.3.40.1.1.1.1.2.1.2
jnxAnalyzerInputType obsolete
This specifies whether interfaces or VLANs is mirrored.

Mirroring can be done on the basis of the interface name.All packets
received on a port configured for ingress mirroring is sent to the
analyzer…
Enumeration
Enumerated Values:
1interface
2vlanname
 .1.3.6.1.4.1.2636.3.40.1.1.1.1.2.1.3

jnxAnalyzerOutputTable

table
.1.3.6.1.4.1.2636.3.40.1.1.1.1.3 · 1 row entry · 2 columns
Open in standard view 
This table describes the destination port to which the traffic from 
the source ports are copied.
jnxAnalyzerOutputEntry entry .1.3.6.1.4.1.2636.3.40.1.1.1.1.3.1
An Entry is created for each destination port or destination vlan.
Indexes
jnxAnalyzerName jnxAnalyzerOutputValue
Column Syntax OID
jnxAnalyzerOutputValue
This object identifies each different destination port or
destination vlan.

If the value of jnxAnalyzerOutputType is 1 then jnxAnalyzerOutputValue
gives the destination interface name.

If …
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.2636.3.40.1.1.1.1.3.1.1
jnxAnalyzerOutputType
The destination port can be on the same switch or on a different
switch(Remote Analyzer).

Value 1 specifies that the destination interface is on the same
switch and it receives a copy of traffic from th…
Enumeration
Enumerated Values:
1interface
2vlanname
 .1.3.6.1.4.1.2636.3.40.1.1.1.1.3.1.2

jnxExAnalyzerInputTable

table
.1.3.6.1.4.1.2636.3.40.1.1.1.1.4 · 1 row entry · 3 columns
Open in standard view 
An analyzer Session is an association of several source ports to
a destination port.A range or series of ports can be mirrored in
a session.
jnxExAnalyzerInputEntry entry .1.3.6.1.4.1.2636.3.40.1.1.1.1.4.1
An Entry is created for each Input Source port.
Indexes
jnxAnalyzerName jnxExAnalyzerInputOption jnxExAnalyzerInputValue
Column Syntax OID
jnxExAnalyzerInputOption
A source port is a switch port that is been mirrored. It can be
mirrored based either on Ingress(received) traffic or egress
(transmitted) traffic.

The goal of receive (or ingress) Analyzer is to monitor …
Enumeration
Enumerated Values:
1ingress
2egress
3vlan
4egress-vlan
 .1.3.6.1.4.1.2636.3.40.1.1.1.1.4.1.1
jnxExAnalyzerInputValue
This identifies each different analyzer input source.

If the value of jnxExAnalyzerInputType is 1 then jnxExAnalyzerInputValue
refers to the input source Interface Name.

If the value of jnx…
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.2636.3.40.1.1.1.1.4.1.2
jnxExAnalyzerInputType
This specifies whether interfaces or VLANs is mirrored.

Mirroring can be done on the basis of the interface name.All packets
received on a port configured for ingress mirroring is sent to the
analyzer por…
Enumeration
Enumerated Values:
1interface
2vlanname
 .1.3.6.1.4.1.2636.3.40.1.1.1.1.4.1.3