JNX-MPLS-TE-P2MP-STD-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
3
Rows
3
Columns
36
jnxMplsTeP2mpTunnelTable
table.1.3.6.1.4.1.2636.5.7.1.2.1
·
1 row entry
·
5 columns
The mplsTeP2mpTunnelTable allows new P2MP MPLS tunnels to be
created between an LSR and one or more remote end-points,
and existing P2MP tunnels to be reconfigured or removed.
This table sparse augments mplsTunnelTable in
MPLS-TE-STD-MIB such that entries in that table can be
flagged as point-to-multipoint, and can be configured and
monitored appropriately.
An entry in this table represents a P2MP MPLS tunnel.
An entry can be created by a network administrator or by an
SNMP agent as instructed by an MPLS signaling protocol.
An entry in this table MUST correspo…
An entry can be created by a network administrator or by an
SNMP agent as instructed by an MPLS signaling protocol.
An entry in this table MUST correspo…
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
jnxMplsTeP2mpTunnelP2mpIntegrity
Denotes whether or not P2MP Integrity is required for this
tunnel. If P2MP integrity is operational on a P2MP tunnel then the failure of the path to any of the tunnel destinations should cause the teardow… |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2636.5.7.1.2.1.1.2 |
||||||||||||
|
jnxMplsTeP2mpTunnelBranchRole
This value supplements the value in the object
mplsTunnelRole in MPLS-TE-STD-MIB that indicates the role of this LSR in the tunnel represented by this entry in mplsTeP2mpTunnelTable. mplsTunnelRole may ta… |
Enumerationr/w | .1.3.6.1.4.1.2636.5.7.1.2.1.1.3 |
||||||||||||
|
jnxMplsTeP2mpTunnelP2mpXcIndex
This object contains the value of mplsXCIndex, the primary
index of the mplsXCTable for all cross-connect entries for this P2MP LSP. If no XC entries have been created yet, this object must return zero. … |
MPLS-LSR-STD-MIBMplsIndexType Textual Convention: MPLS-LSR-STD-MIBMplsIndexType OctetStringType Constraints: range: 1..24 |
.1.3.6.1.4.1.2636.5.7.1.2.1.1.4 |
||||||||||||
|
jnxMplsTeP2mpTunnelRowStatus
This variable is used to create, modify, and/or delete a row
in this table. When a row in this table is in active(1) state, no objects in that row can be modified by the agent except mplsTeP2mpTunnelRowStatus and mplsT… |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.2636.5.7.1.2.1.1.5 |
||||||||||||
|
jnxMplsTeP2mpTunnelStorageType
The storage type for this tunnel entry.
Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
SNMPv2-TCStorageTyper/w Textual Convention: SNMPv2-TCStorageType EnumerationType Values:
|
.1.3.6.1.4.1.2636.5.7.1.2.1.1.6 |
.1.3.6.1.4.1.2636.5.7.1.2.3
·
1 row entry
·
24 columns
The mplsTeP2mpTunnelDestTable allows new destinations of P2MP MPLS tunnels to be added to and removed from P2MP tunnels.
An entry in this table represents a destination of a P2MP
MPLS tunnel. An entry can be created by a network
administrator or by an SNMP agent as instructed by an MPLS
signaling protocol.
Entries in this tab…
MPLS tunnel. An entry can be created by a network
administrator or by an SNMP agent as instructed by an MPLS
signaling protocol.
Entries in this tab…
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
jnxMplsTeP2mpTunnelDestSrcSubGroupOriginType
This object identifies the type of address carried in
mplsTeP2mpTunnelDestSrcSubGroupOrigin. Since the object mplsTeP2mpTunnelDestSrcSubGroupOrigin must conform to the protocol specification, this object … |
INET-ADDRESS-MIBInetAddressType Textual Convention: INET-ADDRESS-MIBInetAddressType EnumerationType Values:
|
.1.3.6.1.4.1.2636.5.7.1.2.3.1.1 |
||||||||||||||
|
jnxMplsTeP2mpTunnelDestSrcSubGroupOrigin
The TE Router ID (reachable and stable IP address) of the
originator of the P2MP sub-group as received on a Path message by a transit or egress LSR. This object is interpreted in the context of mplsTeP2mp… |
OctetString | .1.3.6.1.4.1.2636.5.7.1.2.3.1.2 |
||||||||||||||
|
jnxMplsTeP2mpTunnelDestSrcSubGroupID
The unique identifier assigned by the sub-group originator
for this sub-group of this P2MP tunnel as received on a Path message by a transit or egress LSR. The value of the sub-group identifier used on ou… |
Unsigned32 | .1.3.6.1.4.1.2636.5.7.1.2.3.1.3 |
||||||||||||||
|
jnxMplsTeP2mpTunnelDestSubGroupOriginType
This object identifies the type of address carried in
mplsTeP2mpTunnelDestSubGroupOrigin. This object must return either ipv4(1) or ipv6(2) in keeping with the protocol specification. |
INET-ADDRESS-MIBInetAddressType Textual Convention: INET-ADDRESS-MIBInetAddressType EnumerationType Values:
|
.1.3.6.1.4.1.2636.5.7.1.2.3.1.4 |
||||||||||||||
|
jnxMplsTeP2mpTunnelDestSubGroupOrigin
The TE Router ID (reachable and stable IP address) of the
originator of the P2MP sub-group. In many cases, this will be the ingress LSR of the P2MP tunnel and will be the received signaled value as available in mplsTeP2… |
OctetString | .1.3.6.1.4.1.2636.5.7.1.2.3.1.5 |
||||||||||||||
|
jnxMplsTeP2mpTunnelDestSubGroupID
The unique identifier assigned by the sub-group originator
for this sub-group of this P2MP tunnel. An appropriate value for this object during row creation when the sub-group origin in mplsTeP2mpTunnelDes… |
Unsigned32 | .1.3.6.1.4.1.2636.5.7.1.2.3.1.6 |
||||||||||||||
|
jnxMplsTeP2mpTunnelDestDestinationType
This object identifies the type of address carried in
mplsTeP2mpTunnelDestDestination. This object forms part of the index of this table and can, therefore, not return the value unknown(0). Similarly, sin… |
INET-ADDRESS-MIBInetAddressType Textual Convention: INET-ADDRESS-MIBInetAddressType EnumerationType Values:
|
.1.3.6.1.4.1.2636.5.7.1.2.3.1.7 |
||||||||||||||
|
jnxMplsTeP2mpTunnelDestDestination
A single destination of this P2MP tunnel. That is, a
routable TE address of a leaf. This will often be the TE Router ID of the leaf, but can be any interface address. When a signaling protocol is used, th… |
OctetString | .1.3.6.1.4.1.2636.5.7.1.2.3.1.8 |
||||||||||||||
|
jnxMplsTeP2mpTunnelDestBranchOutSegment
This object identifies the outgoing branch from this LSR
towards the destination represented by this table entry. It must be a unique identifier within the scope of this tunnel. If MPLS-LSR-STD-MIB is imp… |
MPLS-LSR-STD-MIBMplsIndexType Textual Convention: MPLS-LSR-STD-MIBMplsIndexType OctetStringType Constraints: range: 1..24 |
.1.3.6.1.4.1.2636.5.7.1.2.3.1.9 |
||||||||||||||
|
jnxMplsTeP2mpTunnelDestHopTableIndex
Index into the mplsTunnelHopTable entry that specifies the
explicit route hops for this destination of the P2MP tunnel. This object represents the configured route for the branch of the P2M… |
MPLS-TC-STD-MIBMplsPathIndexOrZeror/w Textual Convention: MPLS-TC-STD-MIBMplsPathIndexOrZero Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.5.7.1.2.3.1.10 |
||||||||||||||
|
jnxMplsTeP2mpTunnelDestPathInUse
This value denotes the configured path that was chosen as
the explicit path to this destination of this P2MP tunnel. This value reflects the secondary index into mplsTunnelHopTable where the primary index comes from mpl… |
MPLS-TC-STD-MIBMplsPathIndexOrZeror/w Textual Convention: MPLS-TC-STD-MIBMplsPathIndexOrZero Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.5.7.1.2.3.1.11 |
||||||||||||||
|
jnxMplsTeP2mpTunnelDestCHopTableIndex
Index into the mplsTunnelCHopTable that identifies the
explicit path for this destination of the P2MP tunnel. This path is based on the chosen configured path identified by mplsTeP2mpTunnelDestHopTableInd… |
MPLS-TC-STD-MIBMplsPathIndexOrZero Textual Convention: MPLS-TC-STD-MIBMplsPathIndexOrZero Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.5.7.1.2.3.1.12 |
||||||||||||||
|
jnxMplsTeP2mpTunnelDestARHopTableIndex
Index into the mplsTunnelARHopTable that identifies the
actual hops traversed to this destination of the P2MP tunnel. This is automatically updated by the agent when the actual hops becomes available. If … |
MPLS-TC-STD-MIBMplsPathIndexOrZero Textual Convention: MPLS-TC-STD-MIBMplsPathIndexOrZero Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.5.7.1.2.3.1.13 |
||||||||||||||
|
jnxMplsTeP2mpTunnelDestTotalUpTime
This value represents the aggregate up time for all
instances of this tunnel to this destination, if this information is available. If this information is not available, this object MUST return a value of… |
SNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.5.7.1.2.3.1.14 |
||||||||||||||
|
jnxMplsTeP2mpTunnelDestInstanceUpTime
This value identifies the total time that the currently
active tunnel instance to this destination has had its operational status (mplsTeP2mpTunnelDestOperStatus) set to up(1) since it was last previously not up(1). |
SNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.5.7.1.2.3.1.15 |
||||||||||||||
|
jnxMplsTeP2mpTunnelDestPathChanges
This object counts the number of times the actual path for
this destination of this P2MP tunnel instance has changed. This object should be read in conjunction with mplsTeP2mpTunnelDestDiscontinuityTime. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.5.7.1.2.3.1.16 |
||||||||||||||
|
jnxMplsTeP2mpTunnelDestLastPathChange
Specifies the time since the last change to the actual path
for this destination of this P2MP tunnel instance. |
SNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.5.7.1.2.3.1.17 |
||||||||||||||
|
jnxMplsTeP2mpTunnelDestCreationTime
Specifies the value of sysUpTime when the first instance of
this tunnel came into existence for this destination. That is, when the value of mplsTeP2mpTunnelDestOperStatus was first set to up(1). |
SNMPv2-TCTimeStamp Textual Convention: SNMPv2-TCTimeStamp Unsigned32 |
.1.3.6.1.4.1.2636.5.7.1.2.3.1.18 |
||||||||||||||
|
jnxMplsTeP2mpTunnelDestStateTransitions
This object counts the number of times the status
(mplsTeP2mpTunnelDestOperStatus) of this tunnel instance to this destination has changed. This object should be read in conjunction with mp… |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.5.7.1.2.3.1.19 |
||||||||||||||
|
jnxMplsTeP2mpTunnelDestDiscontinuityTime
The value of sysUpTime on the most recent occasion at which
any one or more of this row's Counter32 objects experienced a discontinuity. If no such discontinuity has occurred since the last re-initialization of the loca… |
SNMPv2-TCTimeStamp Textual Convention: SNMPv2-TCTimeStamp Unsigned32 |
.1.3.6.1.4.1.2636.5.7.1.2.3.1.20 |
||||||||||||||
|
jnxMplsTeP2mpTunnelDestAdminStatus
Indicates the desired operational status of this
destination of this P2MP tunnel. |
Enumerationr/w | .1.3.6.1.4.1.2636.5.7.1.2.3.1.21 |
||||||||||||||
|
jnxMplsTeP2mpTunnelDestOperStatus
Indicates the actual operational status of this destination
of this P2MP tunnel. This object may be compared to mplsTunnelOperStatus that includes two other values: dormant(5) -- some component is missing … |
Enumeration | .1.3.6.1.4.1.2636.5.7.1.2.3.1.22 |
||||||||||||||
|
jnxMplsTeP2mpTunnelDestRowStatus
This object is used to create, modify, and/or delete a row
in this table. When a row in this table is in active(1) state, no objects in that row can be modified by SET operations except mplsTeP2mpTunnelDestAdminStatus a… |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.2636.5.7.1.2.3.1.23 |
||||||||||||||
|
jnxMplsTeP2mpTunnelDestStorageType
The storage type for this table entry.
Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
SNMPv2-TCStorageTyper/w Textual Convention: SNMPv2-TCStorageType EnumerationType Values:
|
.1.3.6.1.4.1.2636.5.7.1.2.3.1.24 |
.1.3.6.1.4.1.2636.5.7.1.2.4
·
1 row entry
·
7 columns
This table provides per-tunnel branch MPLS performance
information.
This table is not valid for switching types other than
packet.
An entry in this table is created by the LSR for each
downstream branch (out-segment) from this LSR for this P2MP
tunnel.
More than one destination as represented by an entry in the
mplsTeP2mpTunnelDestTabl…
downstream branch (out-segment) from this LSR for this P2MP
tunnel.
More than one destination as represented by an entry in the
mplsTeP2mpTunnelDestTabl…
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
jnxMplsTeP2mpTunnelBranchPerfBranch
This object identifies an outgoing branch from this LSR
for this tunnel. Its value is unique within the context of the tunnel. If MPLS-LSR-STD-MIB is implemented, this object should … |
MPLS-LSR-STD-MIBMplsIndexType Textual Convention: MPLS-LSR-STD-MIBMplsIndexType OctetStringType Constraints: range: 1..24 |
.1.3.6.1.4.1.2636.5.7.1.2.4.1.1 |
|
jnxMplsTeP2mpTunnelBranchPerfPackets
Number of packets forwarded by the tunnel onto this branch.
This object should represents the 32-bit value of the least significant part of the 64-bit value if both mplsTeP2mpTunnelBranchPerfHCPackets is returned. This … |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.5.7.1.2.4.1.2 |
|
jnxMplsTeP2mpTunnelBranchPerfHCPackets
High capacity counter for number of packets forwarded by the
tunnel onto this branch. This object should be read in conjunction with mplsTeP2mpTunnelBranchDiscontinuityTime. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2636.5.7.1.2.4.1.3 |
|
jnxMplsTeP2mpTunnelBranchPerfErrors
Number of packets dropped because of errors or for other
reasons, that were supposed to be forwarded onto this branch for this tunnel. This object should be read in conjunction with mplsTeP2mpTunnelBranchDiscontinuityTi… |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.5.7.1.2.4.1.4 |
|
jnxMplsTeP2mpTunnelBranchPerfBytes
Number of bytes forwarded by the tunnel onto this branch.
This object should represents the 32-bit value of the least significant part of the 64-bit value if both mplsTeP2mpTunnelBranchPerf… |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.5.7.1.2.4.1.5 |
|
jnxMplsTeP2mpTunnelBranchPerfHCBytes
High capacity counter for number of bytes forwarded
by the tunnel onto this branch. This object should be read in conjunction with mplsTeP2mpTunnelBranchDiscontinuityTime. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2636.5.7.1.2.4.1.6 |
|
jnxMplsTeP2mpTunnelBranchDiscontinuityTime
The value of sysUpTime on the most recent occasion at which
any one or more of this row's Counter32 or Counter64 objects experienced a discontinuity. If no such discontinuity has occurred since the last re-initializatio… |
SNMPv2-TCTimeStamp Textual Convention: SNMPv2-TCTimeStamp Unsigned32 |
.1.3.6.1.4.1.2636.5.7.1.2.4.1.7 |