IEEE8021-PB-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

ieee8021PbVidTranslationTable

table deprecated

.1.3.111.2.802.1.1.5.1.1 · 1 row entry · 3 columns

Open in standard view

This table is used to configure the VID Translation Table
defined in 12.10.1.8.  The VID
Translation Table is used to implement a bidirectional
mapping between a local S-VID, used in data and protocol
frames transmitted and received through a CNP or PNP,
and a relay S-VID, used by the filtering and forwarding
process.  Each row in this table is indexed by component,
port, and local S-VID value and indicates the relay S-VID
value to be used for the specified S-VID.  If no entry for
a component, port, and local-svid is present in this table
is present then the relay S-VID used for a frame received
on that port with the local S-VID value will be the S-VID
that has the same numeric value as the local S-VID of the
received frame.
          
Entries in this table must be persistent over power up
restart/reboot.

ieee8021PbVidTranslationEntry entry .1.3.111.2.802.1.1.5.1.1.1

An entry for the S-VID translation table which includes
both the Local and Relay S-VIDs between which the PNP or CNP
translates.

Note that the component ID of entries in this table must refer
to the S-VLAN…

Indexes

IEEE8021-BRIDGE-MIBieee8021BridgeBasePortComponentId IEEE8021-BRIDGE-MIBieee8021BridgeBasePort ieee8021PbVidTranslationLocalVid

Column Syntax OID

ieee8021PbVidTranslationLocalVid deprecated

The S-VID on received(transmitted) at the ISS of a CNP or PNP.

Q-BRIDGE-MIBVlanId

Textual Convention: Q-BRIDGE-MIBVlanId Integer32

Type Constraints:
range: 1..4094

.1.3.111.2.802.1.1.5.1.1.1.1

ieee8021PbVidTranslationRelayVid deprecated

The translated S-VID delivered(received) over the EISS from a
CNP or PNP. The default value of this object on creation will
be the value of the corresponding instance of
ieee8021PbVidTranslationLocalVid.

Q-BRIDGE-MIBVlanIdr/w

Textual Convention: Q-BRIDGE-MIBVlanId Integer32

Type Constraints:
range: 1..4094

.1.3.111.2.802.1.1.5.1.1.1.2

ieee8021PbVidTranslationRowStatus deprecated

This indicates the status of an entry in this table, and is
used to create/delete entries.

It is an implementation specific decision as to whether any
column in this table may be set while the correspondi…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.111.2.802.1.1.5.1.1.1.3

ieee8021PbCVidRegistrationTable

table

.1.3.111.2.802.1.1.5.1.2 · 1 row entry · 5 columns

Open in standard view

A table used in a CEP to create the mapping between a C-VID
and a service represented by an S-VID.
          
Note that the component ID of entries in this table must refer
to the S-VLAN component of a Provider Edge Bridge and the Port
Number must refer to the port number of the Customer Edge Port
associated with that Provider Edge Bridge.
          
Entries in this table must be persistent over power up
restart/reboot.

ieee8021PbCVidRegistrationEntry entry .1.3.111.2.802.1.1.5.1.2.1

An element of the C-VID registration table accessed by PB
C-VLAN component, Customer Edge Port Bridge Port number, and
C-VID. Each element contains the mapping between a C-VID and
the S-VID which carries the service an…

Indexes

IEEE8021-BRIDGE-MIBieee8021BridgeBasePortComponentId IEEE8021-BRIDGE-MIBieee8021BridgeBasePort ieee8021PbCVidRegistrationCVid

Column Syntax OID

ieee8021PbCVidRegistrationCVid

C-VID of this C-VID registration entry.

Q-BRIDGE-MIBVlanId

Textual Convention: Q-BRIDGE-MIBVlanId Integer32

Type Constraints:
range: 1..4094

.1.3.111.2.802.1.1.5.1.2.1.1

ieee8021PbCVidRegistrationSVid

S-VID for this C-VID registration entry.

Q-BRIDGE-MIBVlanIdr/w

Textual Convention: Q-BRIDGE-MIBVlanId Integer32

Type Constraints:
range: 1..4094

.1.3.111.2.802.1.1.5.1.2.1.2

ieee8021PbCVidRegistrationUntaggedPep

A flag indicating if this C-VID should be carried untagged
at the PEP. A value of true(1) means untagged.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.111.2.802.1.1.5.1.2.1.3

ieee8021PbCVidRegistrationUntaggedCep

A flag indicating if this C-VID should be carried untagged
at the CEP. A value of true(1) means untagged.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.111.2.802.1.1.5.1.2.1.4

ieee8021PbCVidRegistrationRowStatus

This indicates the status of an entry in this table, and is
used to create/delete entries.

The value of ieee8021PbCVidRegistrationSVid must be set before
an entry in this table can be made valid.
…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.111.2.802.1.1.5.1.2.1.5

ieee8021PbEdgePortTable

table

.1.3.111.2.802.1.1.5.1.3 · 1 row entry · 5 columns

Open in standard view

A Provider Edge Port (PEP) table which indicate the subset of
parameters needed for each PEP.

ieee8021PbEdgePortEntry entry .1.3.111.2.802.1.1.5.1.3.1

An entry in the PEP table indexed by ComponentID and S-VID and
containing parameters used to configure ingress filtering on
the PEP, thus affecting traffic transiting from the provider
network to the customer edge port.…

Indexes

IEEE8021-BRIDGE-MIBieee8021BridgeBasePortComponentId IEEE8021-BRIDGE-MIBieee8021BridgeBasePort ieee8021PbEdgePortSVid

Column Syntax OID

ieee8021PbEdgePortSVid

The 12 bit S-VID associated with the PEP.

Q-BRIDGE-MIBVlanId

Textual Convention: Q-BRIDGE-MIBVlanId Integer32

Type Constraints:
range: 1..4094

.1.3.111.2.802.1.1.5.1.3.1.1

ieee8021PbEdgePortPVID

A 12-bit C-VID to be used for untagged frames received at
the Provider Edge Port.

Q-BRIDGE-MIBVlanIdr/w

Textual Convention: Q-BRIDGE-MIBVlanId Integer32

Type Constraints:
range: 1..4094

.1.3.111.2.802.1.1.5.1.3.1.2

ieee8021PbEdgePortDefaultUserPriority

An integer range 0-7 to be used for untagged frames received
at the Provider Edge Port.

IEEE8021-TC-MIBIEEE8021PriorityValuer/w

Textual Convention: IEEE8021-TC-MIBIEEE8021PriorityValue Unsigned32

Type Constraints:
range: 0..7

.1.3.111.2.802.1.1.5.1.3.1.3

ieee8021PbEdgePortAcceptableFrameTypes

the Acceptable Frame Types for frames received at the PEP.
The permissible values for the parameter are:
1) Admit all frames;
2) Admit only untagged and Priority-tagged frames;
3) Admit only VLAN-tagged fram…

IEEE8021-TC-MIBIEEE8021PortAcceptableFrameTypesr/w

Textual Convention: IEEE8021-TC-MIBIEEE8021PortAcceptableFrameTypes Enumeration

Type Values:

1	admitAll
2	admitUntaggedAndPriority
3	admitTagged

.1.3.111.2.802.1.1.5.1.3.1.4

ieee8021PbEdgePortEnableIngressFiltering

Filtering parameter for frames received at the PEP.
The permissible values for the parameter are:
true(1) Enabled;
false(2) Disabled.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.111.2.802.1.1.5.1.3.1.5

ieee8021PbServicePriorityRegenerationTable

table

.1.3.111.2.802.1.1.5.1.4 · 1 row entry · 3 columns

Open in standard view

The priority regeneration table for this PEP.

ieee8021PbServicePriorityRegenerationEntry entry .1.3.111.2.802.1.1.5.1.4.1

An element of the PEP priority regeneration table indexed
by Component ID, Bridge Port number, S-VID, and received
priority. Each element contains the regenerated priority.

Note that the component ID of en…

Indexes

IEEE8021-BRIDGE-MIBieee8021BridgeBasePortComponentId IEEE8021-BRIDGE-MIBieee8021BridgeBasePort ieee8021PbServicePriorityRegenerationSVid ieee8021PbServicePriorityRegenerationReceivedPriority

Column	Syntax	OID
ieee8021PbServicePriorityRegenerationSVid S-VID for this regeneration table entry.	Q-BRIDGE-MIBVlanId Textual Convention: Q-BRIDGE-MIBVlanId `Integer32` Type Constraints: `range: 1..4094`	`.1.3.111.2.802.1.1.5.1.4.1.1`
ieee8021PbServicePriorityRegenerationReceivedPriority Received priority for this regeneration table entry.	IEEE8021-TC-MIBIEEE8021PriorityValue Textual Convention: IEEE8021-TC-MIBIEEE8021PriorityValue `Unsigned32` Type Constraints: `range: 0..7`	`.1.3.111.2.802.1.1.5.1.4.1.2`
ieee8021PbServicePriorityRegenerationRegeneratedPriority The regenerated priority contained in this regeneration table entry.	IEEE8021-TC-MIBIEEE8021PriorityValuer/w Textual Convention: IEEE8021-TC-MIBIEEE8021PriorityValue `Unsigned32` Type Constraints: `range: 0..7`	`.1.3.111.2.802.1.1.5.1.4.1.3`

ieee8021PbCnpTable

table

.1.3.111.2.802.1.1.5.1.5 · 1 row entry · 3 columns

Open in standard view

This table is used for dynamic creation and deletion of
Customer Network Ports on S-VLAN components or I-components.
Creation of an entry in this table will implicitly also
create a corresponding entry in the ieee8021BridgeBasePortTable.
          
Entries in this table must be persistent across reinitializations
of the management system.

ieee8021PbCnpEntry entry .1.3.111.2.802.1.1.5.1.5.1

Represents a dynamically created Customer Network Port.

Indexes

IEEE8021-BRIDGE-MIBieee8021BridgeBasePortComponentId IEEE8021-BRIDGE-MIBieee8021BridgeBasePort

Column Syntax OID

ieee8021PbCnpCComponentId

The component ID of the C-Vlan component if this is an
internal customer network port. The value must be 0 for
an external customer network port.

This value must be consistent with the value of the
corre…

IEEE8021-TC-MIBIEEE8021PbbComponentIdentifierOrZeror/w

Textual Convention: IEEE8021-TC-MIBIEEE8021PbbComponentIdentifierOrZero Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.111.2.802.1.1.5.1.5.1.1

ieee8021PbCnpSVid

The S-VID for service for an internal customer network port.
For an external port, this value must be 0.

This value must be consistent with the value of the
corresponding instance of ieee8021PbCnpCCompone…

Q-BRIDGE-MIBVlanIdOrNoner/w

Textual Convention: Q-BRIDGE-MIBVlanIdOrNone Integer32

Type Constraints:
range: 0..4094

.1.3.111.2.802.1.1.5.1.5.1.2

ieee8021PbCnpRowStatus

This object is used for creation/deletion of entries in
this table.

All columns in this table must have valid values before
this object can be set to active(1).

While the value of this obje…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.111.2.802.1.1.5.1.5.1.3

ieee8021PbPnpTable

table

.1.3.111.2.802.1.1.5.1.6 · 1 row entry · 1 columns

Open in standard view

This table is used for dynamic creation and deletion of
Provider Network Ports on S-VLAN components or B-components.
Creation of an entry in this table will implicitly also
create a corresponding entry in the ieee8021BridgeBasePortTable.
          
Entries in this table must be persistent across reinitializations
of the management system.

ieee8021PbPnpEntry entry .1.3.111.2.802.1.1.5.1.6.1

Represents a dynamically created Provider Network Port.

Indexes

IEEE8021-BRIDGE-MIBieee8021BridgeBasePortComponentId IEEE8021-BRIDGE-MIBieee8021BridgeBasePort

Column Syntax OID

ieee8021PbPnpRowStatus

This object is used for creation/deletion of entries in
this table.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.111.2.802.1.1.5.1.6.1.1

ieee8021PbCepTable

table

.1.3.111.2.802.1.1.5.1.7 · 1 row entry · 3 columns

Open in standard view

This table is used to create Customer Edge Ports, CEPs, on a
provider edge Bridge.  It is indexed by the ComponentId of the
PEB's S-VLAN component and by the port number for the CEP.  Note that
the CEP's port number belongs to the set of port numbers
associated with the PEB's S-VLAN component.
          
Entries in this table must be persistent across reinitializations
of the management system.  However, note that some column values,
as noted below, may change across system reinitializations.

ieee8021PbCepEntry entry .1.3.111.2.802.1.1.5.1.7.1

The entry of the ieee8021PbCepTable. Note that the component
index must refer to the S-VLAN component of a PEB, and that the port
number for the CEP is allocated from the port number space of
that S-VLAN component.

Indexes

IEEE8021-BRIDGE-MIBieee8021BridgeBasePortComponentId IEEE8021-BRIDGE-MIBieee8021BridgeBasePort

Column Syntax OID

ieee8021PbCepCComponentId

This column is an implementation specific column that may be
used to map the C component associated with this CEP to other
tables within the system, such as the Entity MIB. This
column may not be created or modified by…

IEEE8021-TC-MIBIEEE8021PbbComponentIdentifierOrZero

Textual Convention: IEEE8021-TC-MIBIEEE8021PbbComponentIdentifierOrZero Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.111.2.802.1.1.5.1.7.1.1

ieee8021PbCepCepPortNumber

This column is an implementation specific column that may be
used to map the CEP to other tables within the system, for
example the Entity MIB. This column may not be created or
modified by management station action. …

IEEE8021-TC-MIBIEEE8021BridgePortNumberOrZero

Textual Convention: IEEE8021-TC-MIBIEEE8021BridgePortNumberOrZero Unsigned32

Type Constraints:
range: 0..65535

.1.3.111.2.802.1.1.5.1.7.1.2

ieee8021PbCepRowStatus

This indicates the status of the entry, and is used to create
and delete entries in this table.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.111.2.802.1.1.5.1.7.1.3

ieee8021PbRcapTable

table

.1.3.111.2.802.1.1.5.1.8 · 1 row entry · 3 columns

Open in standard view

This table is used to create Remote Customer Access Ports, on a
provider edge Bridge. It is indexed by the ComponentId of the
PEB's S-VLAN component and by the port number for the RCAP. Note that
the index port number belongs to the set of port numbers
associated with the PEB's primary S-VLAN component.

Entries in this table must be persistent across reinitializations
of the management agent. However, note that some column values,
as noted below, may change across system reinitializations.

ieee8021PbRcapEntry entry .1.3.111.2.802.1.1.5.1.8.1

The entry of the ieee8021PbRcapTable. Note that the component
index must refer to the primary S-VLAN component of a PEB, and that
the port number index for the RCAP is allocated from the port
number space of that S-VLA…

Indexes

IEEE8021-BRIDGE-MIBieee8021BridgeBasePortComponentId IEEE8021-BRIDGE-MIBieee8021BridgeBasePort

Column Syntax OID

ieee8021PbRcapSComponentId

This column is an implmentation specific column that may be
used to map the Port-mapping S-VLAN component associated with
this RCAP to other tables within the system, such as the
Entity MIB. This column may not be crea…

IEEE8021-TC-MIBIEEE8021PbbComponentIdentifierOrZero

Textual Convention: IEEE8021-TC-MIBIEEE8021PbbComponentIdentifierOrZero Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.111.2.802.1.1.5.1.8.1.1

ieee8021PbRcapRcapPortNumber

This column is an implementation specific column that may be
used to map the RCAP to other tables within the system, for
example the Entity MIB. This column may not be created or
modified by management station action. …

IEEE8021-TC-MIBIEEE8021BridgePortNumberOrZero

Textual Convention: IEEE8021-TC-MIBIEEE8021BridgePortNumberOrZero Unsigned32

Type Constraints:
range: 0..65535

.1.3.111.2.802.1.1.5.1.8.1.2

ieee8021PbRcapRowStatus

This indicates the status of the entry, and is used to create
and delete entries in this table.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.111.2.802.1.1.5.1.8.1.3

ieee8021PbInternalInterfaceTable

table

.1.3.111.2.802.1.1.5.1.9 · 1 row entry · 5 columns

Open in standard view

A table used in a Port-mapping S-VLAN component associated with
a Remote Customer Access Port to manage the mapping between
external S-VIDs and internal interfaces/S-VIDs.
          
Note that the component ID of entries in this table must refer
to the primary S-VLAN component of a Provider Edge Bridge and
the Port Number must refer to the port number of a Remote
Customer Access Port associated with that S-VLAN component.
          
Entries in this table must be persistent over power up
restart/reboot.

ieee8021PbIiEntry entry .1.3.111.2.802.1.1.5.1.9.1

An element of the internal interface table accessed by PB
S-VLAN component ID, Remnote Customer Access Port Bridge Port
number, and external S-VID. Each element contains the mapping
between an external S-VID and the in…

Indexes

IEEE8021-BRIDGE-MIBieee8021BridgeBasePortComponentId IEEE8021-BRIDGE-MIBieee8021BridgeBasePort ieee8021PbIiExternalSVid

Column Syntax OID

ieee8021PbIiExternalSVid

External S-VID for this internal interface table entry.

Q-BRIDGE-MIBVlanId

Textual Convention: Q-BRIDGE-MIBVlanId Integer32

Type Constraints:
range: 1..4094

.1.3.111.2.802.1.1.5.1.9.1.1

ieee8021PbIiInternalPortNumber

The port number for the internal port on the primary
S-VLAN component. This port number is used in FDB entries
that reference an RCSI.

The port number of the Remote Customer Access Port can
be used to id…

IEEE8021-TC-MIBIEEE8021BridgePortNumberOrZero

Textual Convention: IEEE8021-TC-MIBIEEE8021BridgePortNumberOrZero Unsigned32

Type Constraints:
range: 0..65535

.1.3.111.2.802.1.1.5.1.9.1.2

ieee8021PbIiInternalPortType

The port type of the internal port on the primary
S-VLAN component. This indicates the type of RCSI as follows:

providerNetworkPort(3) - Indicates a PNP (not an RCSI)
customerNetworkPort(4) - In…

IEEE8021-TC-MIBIEEE8021BridgePortTyper/w

Textual Convention: IEEE8021-TC-MIBIEEE8021BridgePortType Enumeration

Type Values:

1	none
2	customerVlanPort
3	providerNetworkPort
4	customerNetworkPort
5	customerEdgePort
6	customerBackbonePort
7	virtualInstancePort
8	dBridgePort
9	remoteCustomerAccessPort
10	stationFacingBridgePort
11	uplinkAccessPort
12	uplinkRelayPort

.1.3.111.2.802.1.1.5.1.9.1.3

ieee8021PbIiInternalSVid

Internal S-VID for this external S-VID entry.

Q-BRIDGE-MIBVlanIdOrNoner/w

Textual Convention: Q-BRIDGE-MIBVlanIdOrNone Integer32

Type Constraints:
range: 0..4094

.1.3.111.2.802.1.1.5.1.9.1.4

ieee8021PbIiRowStatus

This indicates the status of an entry in this table, and is
used to create/delete entries.

The value of ieee8021PbIiExternalSVid must be set before
an entry in this table can be made valid.deprecated
…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.111.2.802.1.1.5.1.9.1.5