IBM2210-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
15

proXfaceGenericTable

table mandatory
.1.3.6.1.4.1.1.2 · 1 row entry · 12 columns
Open in standard view 
A table of information about each interface.
proXfaceGenericEntry entry .1.3.6.1.4.1.1.2.1
An entry containing objects to describe the
interface.
Indexes
Column Syntax OID
proXfaceGenericType mandatory
The type of the interface, according to the internal
net identifier.
Enumeration
Enumerated Values:
1vi
2pn10
3pn80
4chaos
5xeth
6m1822
7scc
8ieth
9peth
10com2
11com4
12omn
13pn4
14hyper
15wdeth
16gwslc
17x25
18pqsx
19atr
20fddi
21vlane
22vcom4
23pn16
24atcomsl
25ceth
26csl
27seth
28srlygwsl
29srlyatc2
30srlycsl
31srbtnl
32sdlcrly
33nseth
34x25atc2
35x25csl
36x25dcsl
37qsl
38ydcisdn
39tsl
40qslch
41v25bis
42hssi
43quiceth
44quictkr
45quicsl
46quicbisdn
47vlic
48atm
49escon
50isdnpri
51quic4wan
52quic8wan
53quic4mdm
54quic8mdm
55pawx21
56pawv36
57pawrs232
58nwescon
59atmvirt
60appnl
61v34
62mp
63atmpmpls
64eth100
 .1.3.6.1.4.1.1.2.1.1
proXfaceGenericCSR mandatory
The Command and Status Register address for the
interface.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1.2.1.2
proXfaceGenericIntVec mandatory
The multi-bus interrupt vector for the interface.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1.2.1.3
proXfaceGenericMaintInt mandatory
The number of seconds before the next interface
maintenance.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1.2.1.4
proXfaceGenericMaintLim mandatory
The number of maintenance check failures permitted
before a self test is run.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1.2.1.5
proXfaceGenericNextTest mandatory
The number of seconds before the next self test.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1.2.1.6
proXfaceGenericNextMaint mandatory
The number of seconds between maintenance checks.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1.2.1.7
proXfaceGenericMaintCnt mandatory
The number of failed maintenance checks since the
last successful maintenance check.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1.2.1.8
proXfaceGenericMaintFails mandatory
The total number of maintenance failures on this
interface.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1.2.1.9
proXfaceGenericTestPasses mandatory
The total number of self test successes on this
interface.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1.2.1.10
proXfaceGenericTestFails mandatory
The total number of self test failures on this
interface.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1.2.1.11
proXfaceGenericModuleId mandatory
The module identifier of this interface, this
object is relevant only to the CNX and DNX
platforms. It uniquely identifies the interface
card-type.

It will always be '0' for the IBM2210 platform.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1.2.1.12

ibmServiceGenericTable

table mandatory
.1.3.6.1.4.1.2.6.72.3.1.1 · 1 row entry · 3 columns
Open in standard view 
A table of information about each service port.
ibmServiceGenericEntry entry .1.3.6.1.4.1.2.6.72.3.1.1.1
An entry containing objects to describe the
service port.
Indexes
ibmServiceGenericPort
Column Syntax OID
ibmServiceGenericPort mandatory
The number of service port. On 12x and 1Sx/1Ux models,
only one service port exists and is designated #1. On
x4x models, the lower paort is designated #1, the upper
port is #2.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.6.72.3.1.1.1.1
ibmServiceGenericBaurdrate mandatory
The baudrate of service port.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.6.72.3.1.1.1.2
ibmServiceGenericType mandatory
The card type of service port. On 12x, 1Sx and 1Ux
models, the second row will always indeicate nocard(3).
Enumeration
Enumerated Values:
1eia232
2modem
3nocard
 .1.3.6.1.4.1.2.6.72.3.1.1.1.3