IBM-6611-APPN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
24
Rows
24
Columns
255

ibmappnNodePortTable

table mandatory
.1.3.6.1.4.1.2.6.2.13.1.4.1 · 1 row entry · 13 columns
Open in standard view 
The Port table describes the configuration and current
status of the ports used by APPN.  The type of DLC is
included in this table as a pointer to the DLC port
specific tables.
ibmappnNodePortEntry entry .1.3.6.1.4.1.2.6.2.13.1.4.1.1
The Port Name is used as the index to this table.
Indexes
No indexes recorded
Column Syntax OID
ibmappnNodePortName mandatory
Administratively-assigned name for this APPN port.
The name can be from one to eight characters.
OctetString .1.3.6.1.4.1.2.6.2.13.1.4.1.1.1
ibmappnNodePortState mandatory
Indicates the current state of this port.
Enumerationr/w .1.3.6.1.4.1.2.6.2.13.1.4.1.1.2
ibmappnNodePortDlcType mandatory
The type of DLC interface, distinguished according
to the protocol immediately 'below' this layer.
Enumeration .1.3.6.1.4.1.2.6.2.13.1.4.1.1.3
ibmappnNodePortPortType mandatory
Identifies the type of line used by this port.
Enumeration .1.3.6.1.4.1.2.6.2.13.1.4.1.1.4
ibmappnNodePortSIMRIM mandatory
Indicates whether Set Initialization Mode (SIM) and
Receive Initialization Mode (RIM) are supported.
Enumeration .1.3.6.1.4.1.2.6.2.13.1.4.1.1.5
ibmappnNodePortLsRole mandatory
Initial role for LSs activated through this port,
where 'abm' indicates asynchronous balance mode.
Enumeration .1.3.6.1.4.1.2.6.2.13.1.4.1.1.6
ibmappnNodePortMaxRcvBtuSize mandatory
Maximum Basic Transmission Size (BTU) that a
link station on this port can receive.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.6.2.13.1.4.1.1.7
ibmappnNodePortMaxIframeWindow mandatory
Maximum number of I-frames that can be received
by the XID sender before an acknowledgement is received.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.6.2.13.1.4.1.1.8
ibmappnNodePortDefLsGoodXids mandatory
The total number of successfull XIDs that have occurred
on all defined link stations on this port since the last
time this port was started.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2.6.2.13.1.4.1.1.9
ibmappnNodePortDefLsBadXids mandatory
The total number of unsuccessfull XIDs that have occurred
on all defined link stations on this port since the last
time this port was started.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2.6.2.13.1.4.1.1.10
ibmappnNodePortDynLsGoodXids mandatory
The total number of successfull XIDs that have occurred
on all dynamic link stations on this port since the last
time this port was started.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2.6.2.13.1.4.1.1.11
ibmappnNodePortDynLsBadXids mandatory
The total number of unsuccessfull XIDs that have occurred
on all dynamic link stations on this port since the last
time this port was started.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2.6.2.13.1.4.1.1.12
ibmappnNodePortSpecific mandatory
Identifies the port specific OBJECT IDENTIFIER
that can provide additional information.
ObjectIdentifier .1.3.6.1.4.1.2.6.2.13.1.4.1.1.13

ibmappnNodePortIpTable

table mandatory
.1.3.6.1.4.1.2.6.2.13.1.4.2 · 1 row entry · 2 columns
Open in standard view 
Port table (TCP/IP specific).
ibmappnNodePortIpEntry entry .1.3.6.1.4.1.2.6.2.13.1.4.2.1
The IP Name is used as the index to this table.
Indexes
No indexes recorded
Column Syntax OID
ibmappnNodePortIpName mandatory
Administratively-assigned name for this APPN port.
The name can be from one to eight characters.
OctetString .1.3.6.1.4.1.2.6.2.13.1.4.2.1.1
ibmappnNodePortIpPortNum mandatory
Local TCP/IP port number.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.6.2.13.1.4.2.1.2

ibmappnNodePortDlsTable

table mandatory
.1.3.6.1.4.1.2.6.2.13.1.4.3 · 1 row entry · 3 columns
Open in standard view 
Port table (DLS specific).
ibmappnNodePortDlsEntry entry .1.3.6.1.4.1.2.6.2.13.1.4.3.1
The DLS Name is used as the index to this table.
Indexes
No indexes recorded
Column Syntax OID
ibmappnNodePortDlsName mandatory
Administratively-assigned name for this APPN DLS port.
The name can be from one to eight characters.
OctetString .1.3.6.1.4.1.2.6.2.13.1.4.3.1.1
ibmappnNodePortDlsMac mandatory
Local DLS MAC address.
OctetString .1.3.6.1.4.1.2.6.2.13.1.4.3.1.2
ibmappnNodePortDlsSap mandatory
Local DLS Sap address.
OctetString .1.3.6.1.4.1.2.6.2.13.1.4.3.1.3

ibmappnNodePortTrTable

table mandatory
.1.3.6.1.4.1.2.6.2.13.1.4.4 · 1 row entry · 3 columns
Open in standard view 
Port table (Token Ring specific).
ibmappnNodePortTrEntry entry .1.3.6.1.4.1.2.6.2.13.1.4.4.1
The TR Name is used as the index to this table.
Indexes
No indexes recorded
Column Syntax OID
ibmappnNodePortTrName mandatory
Administratively-assigned name for this APPN port.
The name can be from one to eight characters.
OctetString .1.3.6.1.4.1.2.6.2.13.1.4.4.1.1
ibmappnNodePortTrMac mandatory
Local Token Ring MAC address.
OctetString .1.3.6.1.4.1.2.6.2.13.1.4.4.1.2
ibmappnNodePortTrSap mandatory
Local Token Ring Sap address.
OctetString .1.3.6.1.4.1.2.6.2.13.1.4.4.1.3

ibmappnNodePortDlcTraceTable

table mandatory
.1.3.6.1.4.1.2.6.2.13.1.4.5 · 1 row entry · 8 columns
Open in standard view 
Port table generic DLC trace table.
ibmappnNodePortDlcTraceEntry entry .1.3.6.1.4.1.2.6.2.13.1.4.5.1
The Port name and a dynamic integer are the index to
this table.
Indexes
No indexes recorded
Column Syntax OID
ibmappnNodePortDlcTracPortName mandatory
The Port name associated with this this trace table entry.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.2.6.2.13.1.4.5.1.1
ibmappnNodePortDlcTracIndex mandatory
This index value is updated every time a new trace entry
is created which provides a means to retrieve only the
updated entries and also provides a simple method of
correlating the entries. The table will wrap when the…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.6.2.13.1.4.5.1.2
ibmappnNodePortDlcTracDlcType mandatory
The type of DLC interface, distinguished according
to the protocol immediately 'below' this layer.
Enumeration .1.3.6.1.4.1.2.6.2.13.1.4.5.1.3
ibmappnNodePortDlcTracLocalAddr mandatory
Local address in format described below:

other = free form DisplayString
ip = ld. ld. ld. ld / 2d
tr = lx: lx: lx: lx: lx: lx . lx
dlsw = lx: lx: lx: lx: lx: lx . lx
ethernet = lx: lx: …
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.2.6.2.13.1.4.5.1.4
ibmappnNodePortDlcTracRemoteAddr mandatory
Remote Address in the format described below:
other = free form DisplayString
ip = ld. ld. ld. ld / 2d
tr = lx: lx: lx: lx: lx: lx . lx
dlsw = lx: lx: lx: lx: lx: lx . lx

ethernet = lx:…
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.2.6.2.13.1.4.5.1.5
ibmappnNodePortDlcTracMsgType mandatory
Indicates the type of trace record entry
Enumeration .1.3.6.1.4.1.2.6.2.13.1.4.5.1.6
ibmappnNodePortDlcTracCmdType mandatory
Indicates the command type of the trace entry.
Enumeration .1.3.6.1.4.1.2.6.2.13.1.4.5.1.7
ibmappnNodePortDlcTracUseWan mandatory
Indicates the type of connection of the trace entry.
For example, token ring and ethernet ports will have
useLan as connection. For the dls port, it could be
either useWan if connection is across Wan via dls
sessions, …
Enumeration .1.3.6.1.4.1.2.6.2.13.1.4.5.1.8

ibmappnNodeLsTable

table mandatory
.1.3.6.1.4.1.2.6.2.13.1.5.1 · 1 row entry · 42 columns
Open in standard view 
This table contains detail information about the
link station configuration and current status.
ibmappnNodeLsEntry entry .1.3.6.1.4.1.2.6.2.13.1.5.1.1
This table is indexed by the link station name.
Indexes
No indexes recorded
Column Syntax OID
ibmappnNodeLsName mandatory
Administratively-assigned name for the link station.
The name can be from one to eight characters.
OctetString .1.3.6.1.4.1.2.6.2.13.1.5.1.1.1
ibmappnNodeLsPortName mandatory
Administratively-assigned name for the port.
The name can be from one to eight characters.
OctetString .1.3.6.1.4.1.2.6.2.13.1.5.1.1.2
ibmappnNodeLsDlcType mandatory
The type of DLC interface, distinguished according
to the protocol immediately 'below' this layer.
Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.1.1.3
ibmappnNodeLsDynamic mandatory
Identifies whether this resource is a dynamic link station.
Dynamic link stations are created when adjacent nodes
that have not been locally defined establish a connection
with this node.
Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.1.1.4
ibmappnNodeLsState mandatory
State of this link station.
Enumerationr/w .1.3.6.1.4.1.2.6.2.13.1.5.1.1.5
ibmappnNodeLsCpName mandatory
Fully-qualified name of the adjacent node for this link
station. The name can be from three to seventeen
characters. Format is netid.cpname.
OctetString .1.3.6.1.4.1.2.6.2.13.1.5.1.1.6
ibmappnNodeLsTgNum mandatory
Number associated with the TG to this link station.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.6.2.13.1.5.1.1.7
ibmappnNodeLsLimResource mandatory
Indicates whether the link station is
a limited resource. If it is, the TG
is deactivated when there are no sessions.
Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.1.1.8
ibmappnNodeLsMigration mandatory
Indicates whether this link station will be used
for connections to down-level or migration partners.
Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.1.1.9
ibmappnNodeLsBlockNum mandatory
The block number is the first three digits of the node_id.
These 3 hexideimal digits identify the product and are not
configurable.
OctetString .1.3.6.1.4.1.2.6.2.13.1.5.1.1.10
ibmappnNodeLsIdNum mandatory
The ID number is the last 5 digits of the node_id.
These 5 hexadecimal digits are administratively defined and
combined with the 3 digit block number form the node_id.
This node_id is used to identify the local node and…
OctetString .1.3.6.1.4.1.2.6.2.13.1.5.1.1.11
ibmappnNodeLsCpCpSession mandatory
Indicates whether CP-CP sessions are
supported by this link station.
Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.1.1.12
ibmappnNodeLsTargetPacingCount mandatory
Numeric value between 0 and 32767 inclusive indicating
the desired pacing window size for BINDs on this TG.
The number is significant only when fixed bind pacing
is being performed.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.6.2.13.1.5.1.1.13
ibmappnNodeLsMaxSendBtuSize mandatory
Numeric value between 0 and 32767 inclusive indicating
the desired number of bytes in a Basic Transmission Unit
(BTU) that can be sent on this TG.
This is an administratively assigned value.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.6.2.13.1.5.1.1.14
ibmappnNodeLsEffCap mandatory
The effective capacity is an integer value that indicates
the kilo bits per second.
It is derived from the link bandwidth and maximum load
factor with the range of 0 thru 603,979,776.
This is an administratively assigne…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.6.2.13.1.5.1.1.15
ibmappnNodeLsConnCost mandatory
Cost per connect time: a value representing
the relative cost per unit of time to use
the TG. Range is from 0, which means no cost,
to 255, which indicates maximum cost.
This is an administratively assigned value associ…
Integer32 .1.3.6.1.4.1.2.6.2.13.1.5.1.1.16
ibmappnNodeLsByteCost mandatory
Relative cost of transmitting a byte over this link.
Range is from 0 (lowest cost) to 255.
This is an administratively assigned value associated
with the TG using this link station.
Integer32 .1.3.6.1.4.1.2.6.2.13.1.5.1.1.17
ibmappnNodeLsSecurity mandatory
The security is represented as an integer with a range of
1 thru 255 with the most common values enumerated as
defined above.
This is an administratively assigned value associated
with the TG using this link station.
Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.1.1.18
ibmappnNodeLsDelay mandatory
Relative amount of time that it takes for a signal to

travel the length of the logical link. This time is
represented in micro seconds, with some of the more
common values enumerated.
This is an administ…
Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.1.1.19
ibmappnNodeLsUsr1 mandatory
First user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with the TG using this link station.
Integer32 .1.3.6.1.4.1.2.6.2.13.1.5.1.1.20
ibmappnNodeLsUsr2 mandatory
Second user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with the TG using this link station.
Integer32 .1.3.6.1.4.1.2.6.2.13.1.5.1.1.21
ibmappnNodeLsUsr3 mandatory
Third user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with the TG using this link station.
Integer32 .1.3.6.1.4.1.2.6.2.13.1.5.1.1.22
ibmappnNodeLsInXidBytes mandatory
Number of XID bytes received.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2.6.2.13.1.5.1.1.23
ibmappnNodeLsInMsgBytes mandatory
Number of message (I-frame) bytes received.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2.6.2.13.1.5.1.1.24
ibmappnNodeLsInXidFrames mandatory
Number of XID frames received.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2.6.2.13.1.5.1.1.25
ibmappnNodeLsInMsgFrames mandatory
Number of message (I-frame) frames received.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2.6.2.13.1.5.1.1.26
ibmappnNodeLsOutXidBytes mandatory
Number of XID bytes sent.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2.6.2.13.1.5.1.1.27
ibmappnNodeLsOutMsgBytes mandatory
Number of message (I-frame) bytes sent.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2.6.2.13.1.5.1.1.28
ibmappnNodeLsOutXidFrames mandatory
Number of XID frames sent.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2.6.2.13.1.5.1.1.29
ibmappnNodeLsOutMsgFrames mandatory
Number of message (I-frame) frames sent.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2.6.2.13.1.5.1.1.30
ibmappnNodeLsEchoRsps mandatory
Number of responses returned from adjacent link station.
A response should be returned for each test frame sent by
this node.
Test frames are sent to adjacent nodes periodically to
verify connectivity and to measure tha…
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2.6.2.13.1.5.1.1.31
ibmappnNodeLsCurrentDelay mandatory
The time that it took for the last test signal to be
sent and returned from this link station to the
adjacent links station.
This time is represented in milliseconds.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.6.2.13.1.5.1.1.32
ibmappnNodeLsMaxDelay mandatory
The longest time it took for a test signal
to be sent and returned from this link station to the
adjacent links station.
This time is represented in milliseconds .
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.6.2.13.1.5.1.1.33
ibmappnNodeLsMinDelay mandatory
The shortest time it took for a test signal
to be sent and returned from this link station to the
adjacent links station.
This time is represented in milliseconds.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.6.2.13.1.5.1.1.34
ibmappnNodeLsMaxDelayTime mandatory
The time (since system up in hundredth of seconds)
when the longest delay occurred.
This time can be used to identify when this high
water mark occurred in relation to the last initialization
of the APPN node.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2.6.2.13.1.5.1.1.35
ibmappnNodeLsGoodXids mandatory
The total number of successful XIDs that have occurred
on this link station since the time it was started.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2.6.2.13.1.5.1.1.36
ibmappnNodeLsBadXids mandatory
The total number of unsuccessful XIDs that have occurred
on this link station since the time it was started.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2.6.2.13.1.5.1.1.37
ibmappnNodeLsSpecific mandatory
Identifies the DLC specific OBJECT IDENTIFIER
that can provide additional information.
ObjectIdentifier .1.3.6.1.4.1.2.6.2.13.1.5.1.1.38
ibmappnNodeLsSubState mandatory
State of this link station.
Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.1.1.39
ibmappnNodeLsStartTime mandatory
The time (in hundredth of seconds) this link station
has been active the last time since the time APPN was
initialized.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2.6.2.13.1.5.1.1.40
ibmappnNodeLsActiveTime mandatory
The time (in hundredth of seconds) this link station
has been in the active state.
A zero value indicates the link station has never been
active.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2.6.2.13.1.5.1.1.41
ibmappnNodeLsCurrentStateTime mandatory
The time (in hundredth of seconds) the link station is
in the current state.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2.6.2.13.1.5.1.1.42

ibmappnNodeLsIpTable

table mandatory
.1.3.6.1.4.1.2.6.2.13.1.5.2 · 1 row entry · 6 columns
Open in standard view 
Link station table (TCP/IP specific).
ibmappnNodeLsIpEntry entry .1.3.6.1.4.1.2.6.2.13.1.5.2.1
The IP Name is used as the index to this table.
Indexes
No indexes recorded
Column Syntax OID
ibmappnNodeLsIpName mandatory
Administratively-assigned name for this link station. The
name can be from one to eight characters.
OctetString .1.3.6.1.4.1.2.6.2.13.1.5.2.1.1
ibmappnNodeLsIpState mandatory
State of this link station.
Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.2.1.2
ibmappnNodeLsLocalIpAddr mandatory
Local IP address.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2.6.2.13.1.5.2.1.3
ibmappnNodeLsLocalIpPortNum mandatory
Local TCP/IP port number.
The default listening port will be administratively
assigned and will dynamically change if this node
initiates a session with adjacent node.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.6.2.13.1.5.2.1.4
ibmappnNodeLsRemoteIpAddr mandatory
Remote IP address.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2.6.2.13.1.5.2.1.5
ibmappnNodeLsRemoteIpPortNum mandatory
Remote TCP/IP port number.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.6.2.13.1.5.2.1.6

ibmappnNodeLsDlsTable

table mandatory
.1.3.6.1.4.1.2.6.2.13.1.5.3 · 1 row entry · 6 columns
Open in standard view 
Ls Table (DLS specific).
ibmappnNodeLsDlsEntry entry .1.3.6.1.4.1.2.6.2.13.1.5.3.1
The DLS Name is used as the index to this table.
Indexes
No indexes recorded
Column Syntax OID
ibmappnNodeLsDlsName mandatory
Administratively-assigned name for this link station.
The name can be from one to eight characters.
OctetString .1.3.6.1.4.1.2.6.2.13.1.5.3.1.1
ibmappnNodeLsDlsState mandatory
State of this link station.
Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.3.1.2
ibmappnNodeLsLocalDlsMac mandatory
Local MAC address.
OctetString .1.3.6.1.4.1.2.6.2.13.1.5.3.1.3
ibmappnNodeLsLocalDlsSap mandatory
Local SAP address.
OctetString .1.3.6.1.4.1.2.6.2.13.1.5.3.1.4
ibmappnNodeLsRemoteDlsMac mandatory
Remote MAC address.
OctetString .1.3.6.1.4.1.2.6.2.13.1.5.3.1.5
ibmappnNodeLsRemoteDlsSap mandatory
Remote SAP address.
OctetString .1.3.6.1.4.1.2.6.2.13.1.5.3.1.6

ibmappnNodeLsTrTable

table mandatory
.1.3.6.1.4.1.2.6.2.13.1.5.4 · 1 row entry · 6 columns
Open in standard view 
Ls Table (Token Ring specific).
ibmappnNodeLsTrEntry entry .1.3.6.1.4.1.2.6.2.13.1.5.4.1
The TR Name is used as the index to this table.
Indexes
No indexes recorded
Column Syntax OID
ibmappnNodeLsTrName mandatory
Administratively-assigned name for this link station.
The name can be from one to eight characters.
OctetString .1.3.6.1.4.1.2.6.2.13.1.5.4.1.1
ibmappnNodeLsTrState mandatory
State of this link station.
Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.4.1.2
ibmappnNodeLsLocalTrMac mandatory
Local MAC address.
OctetString .1.3.6.1.4.1.2.6.2.13.1.5.4.1.3
ibmappnNodeLsLocalTrSap mandatory
Local SAP address.
OctetString .1.3.6.1.4.1.2.6.2.13.1.5.4.1.4
ibmappnNodeLsRemoteTrMac mandatory
Remote MAC address.
OctetString .1.3.6.1.4.1.2.6.2.13.1.5.4.1.5
ibmappnNodeLsRemoteTrSap mandatory
Remote SAP address.
OctetString .1.3.6.1.4.1.2.6.2.13.1.5.4.1.6

ibmappnNodeLsStatusTable

table mandatory
.1.3.6.1.4.1.2.6.2.13.1.5.5 · 1 row entry · 16 columns
Open in standard view 
This table contains information related to exceptional
and potential exceptional conditions that occur during
the activation, XID exchange, and termination of the
connection.
ibmappnNodeLsStatusEntry entry .1.3.6.1.4.1.2.6.2.13.1.5.5.1
This table is indexed by the LsStatusIndex, which is an
integer that is continuously updated until it eventually
wraps. This provides the management station the ability
to retrieve only the updates to the table by usin…
Indexes
No indexes recorded
Column Syntax OID
ibmappnNodeLsStatusIndex mandatory
This index is continuous index this table.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.6.2.13.1.5.5.1.1
ibmappnNodeLsStatusTime mandatory
Time (in hundreds of a second) since this node was last
initialized.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2.6.2.13.1.5.5.1.2
ibmappnNodeLsStatusLsName mandatory
Administratively-assigned name for this link station.
OctetString .1.3.6.1.4.1.2.6.2.13.1.5.5.1.3
ibmappnNodeLsStatusCpName mandatory
Administratively-assigned fully-qualified name of the
adjacent node partner. This will be provided when the
adjacent node has been defined at this node or when the
XID sequence has proceeded far enough to to identify t…
OctetString .1.3.6.1.4.1.2.6.2.13.1.5.5.1.4
ibmappnNodeLsStatusNodeId mandatory
Adjacent Node id
OctetString .1.3.6.1.4.1.2.6.2.13.1.5.5.1.5
ibmappnNodeLsStatusTgNum mandatory
Number associated with the TG to this link station
with a range from 0 to 256. A value of 256 indicates

the tg number has not been negotiated and is unknown at
this time.
Integer32 .1.3.6.1.4.1.2.6.2.13.1.5.5.1.6
ibmappnNodeLsStatusGeneralSense mandatory
The error sense code associated with the start sequence of
activation of a link up to the beginning of the XID
sequence.
OctetString .1.3.6.1.4.1.2.6.2.13.1.5.5.1.7
ibmappnNodeLsStatusNofRetry mandatory
Indicates whether Node Operator Facility will retry the
start request to activate the link.
Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.5.1.8
ibmappnNodeLsStatusEndSense mandatory
The sense code associated with the termination of the link
connection to adjacent node. This includes all sense
information included in the disconnect recieved from the
lower layer DLCs and also sense information indic…
OctetString .1.3.6.1.4.1.2.6.2.13.1.5.5.1.9
ibmappnNodeLsStatusXidLocalSense mandatory
The error sense code associated with the rejection of the

XID.
OctetString .1.3.6.1.4.1.2.6.2.13.1.5.5.1.10
ibmappnNodeLsStatusXidRemoteSense mandatory
The error sense code adjacent node returned to this node
indicating the reason the XID was rejected.
OctetString .1.3.6.1.4.1.2.6.2.13.1.5.5.1.11
ibmappnNodeLsStatusXidByteInError mandatory
This identifies the actual byte in the XID that caused the
error. The value of zero (0) indicates that the variable
has no meaning.
Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.5.1.12
ibmappnNodeLsStatusXidBitInError mandatory
This identifies the actual bit within the error byte of the
XID. This only has meaning when the byte in error is
greater than zero.
Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.5.1.13
ibmappnNodeLsStatusDlcType mandatory
This identifies DLC type that was being used when error
occurred. This also is used to the format of the
local and remote address provided.

other = free form DisplayString

ip = ld…
Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.5.1.14
ibmappnNodeLsStatusLocalAddr mandatory
This contains a displayable string that identifies the
DLC type and appropriate address. See DlcType above for
details of the format.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.2.6.2.13.1.5.5.1.15
ibmappnNodeLsStatusRemoteAddr mandatory
This contains a displayable string that identifies the
DLC type and appropriate address. See DlcType above for
details of the format.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.2.6.2.13.1.5.5.1.16

ibmappnNnTopoRouteTable

table mandatory
.1.3.6.1.4.1.2.6.2.13.2.1.23 · 1 row entry · 4 columns
Open in standard view 
Table containing an entry for every Class of Service
that it has calculated a route for.
ibmappnNnTopoRouteEntry entry .1.3.6.1.4.1.2.6.2.13.2.1.23.1
The Class of Service name is the index for this table.
Indexes
No indexes recorded
Column Syntax OID
ibmappnNnTopoRouteCos mandatory
The Class of Service for the route.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.2.6.2.13.2.1.23.1.1
ibmappnNnTopoRouteTrees mandatory
Number of routes tree caches built for this Class of
Service since the last initialization.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2.6.2.13.2.1.23.1.2
ibmappnNnTopoRouteCalcs mandatory
Number of routes calculated since last initialization.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2.6.2.13.2.1.23.1.3
ibmappnNnTopoRouteRejs mandatory
Number of route requests that could not
be calculated since last initialization.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2.6.2.13.2.1.23.1.4

ibmappnNnAdjNodeTable

table mandatory
.1.3.6.1.4.1.2.6.2.13.2.2 · 1 row entry · 5 columns
Open in standard view 
Table containing an entry for every node.  The information
kept in this table is the last FRSN sent and received,
the status of the CP-CP sessions, and a gauge that
indicates the number of outstanding TDUs.
ibmappnNnAdjNodeEntry entry .1.3.6.1.4.1.2.6.2.13.2.2.1
The adjacent node name is the index for this table.
Indexes
No indexes recorded
Column Syntax OID
ibmappnNnAdjNodeAdjName mandatory
An administratively-assigned fully-qualified
name of this node's adjacent network node.
OctetString .1.3.6.1.4.1.2.6.2.13.2.2.1.1
ibmappnNnAdjNodeCpCpSessStatus mandatory
Indicates the state of CP-CP sessions between this node
and adjacent network and end nodes. Incative indicates no
CP-CP sessions exists between this node and the adjacent
node. Active indicates CP-CP sessons are activ…
Enumeration .1.3.6.1.4.1.2.6.2.13.2.2.1.2
ibmappnNnAdjNodeOutOfSeqTdus mandatory
Number of out of sequence Topology Database
Updates (TDUs). In a quiesced state, this value is
zero. In normal operation, the value varies
depending on the network environment.
RFC1155-SMIGauge
Textual Convention: RFC1155-SMIGauge Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2.6.2.13.2.2.1.3
ibmappnNnAdjNodeLastFrsnSent mandatory
Flow reduction sequence numbers (FRSNs) are associated
with Topology Database Updates (TDUs) and are unique
only within each APPN network node. A TDU can be
associated with multiple APPN resources. This FRSN
indicates …
Integer32 .1.3.6.1.4.1.2.6.2.13.2.2.1.4
ibmappnNnAdjNodeLastFrsnRcvd mandatory
Flow reduction sequence numbers (FRSNs) are associated
with Topology Database Updates (TDUs) and are unique
only within each APPN network node. A TDU can be
associated with multiple APPN resources. This FRSN
indicates …
Integer32 .1.3.6.1.4.1.2.6.2.13.2.2.1.5

ibmappnNnTopologyTable

table mandatory
.1.3.6.1.4.1.2.6.2.13.2.3.1 · 1 row entry · 14 columns
Open in standard view 
Portion of the APPN routing table
that describes all of the APPN network nodes
and virtual nodes known to this node.
ibmappnNnTopologyEntry entry .1.3.6.1.4.1.2.6.2.13.2.3.1.1
The fully-qualified node name is used to
index this table.
Indexes
No indexes recorded
Column Syntax OID
ibmappnNnNodeName mandatory
Administratively-assigned network name that is locally
defined at each network node in the format NETID.CPNAME.
OctetString .1.3.6.1.4.1.2.6.2.13.2.3.1.1.1
ibmappnNnNodeFrsn mandatory
Flow reduction sequence numbers (FRSNs) are associated
with Topology Database Updates (TDUs) and are unique
only within each APPN network node. A TDU can be
associated with multiple APPN resources. This FRSN
indicates …
Integer32 .1.3.6.1.4.1.2.6.2.13.2.3.1.1.2
ibmappnNnNodeEntryTimeLeft mandatory
Number of days before deletion of this
network node entry. Range is 0-31.
Integer32 .1.3.6.1.4.1.2.6.2.13.2.3.1.1.3
ibmappnNnNodeType mandatory
Type of APPN node.
Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.1.1.4
ibmappnNnNodeRsn mandatory
Resource sequence number that is assigned and
controlled by the network node that owns this
resource. This is always an even 32-bit number
unless an error has occurred.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.6.2.13.2.3.1.1.5
ibmappnNnNodeRouteAddResist mandatory
Route addition resistance
indicates the relative desirability
of using this node for intermediate session traffic.
The value, which can be any integer 0-255,
is used in route computation. The lower the value,
the more …
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.6.2.13.2.3.1.1.6
ibmappnNnNodeCongested mandatory
Indicates whether this node is congested.
This node is not be included in route selection
by other nodes when this congestion exists.
Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.1.1.7
ibmappnNnNodeIsrDepleted mandatory
Indicates whether intermediate session
routing resources are depleted. This node is
not included in intermediate route selection
by other nodes when resources are depleted.
Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.1.1.8
ibmappnNnNodeEndptDepleted mandatory
Indicates whether session endpoint resources are depleted.
Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.1.1.9
ibmappnNnNodeQuiescing mandatory
Indicates whether the node is quiescing.
This node is not included in route selection
by other nodes when the node is quiescing.
Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.1.1.10
ibmappnNnNodeGateway mandatory
Indicates whether the node provide gateway functions.
Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.1.1.11
ibmappnNnNodeCentralDirectory mandatory
Indicates whether the node is central directory.
Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.1.1.12
ibmappnNnNodeIsr mandatory
Indicates whether the node supports intermediate session
routing (ISR).
Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.1.1.13
ibmappnNnNodeChainSupport mandatory
Indicates whether the node supports chaining.
Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.1.1.14

ibmappnNnTgTopologyTable

table mandatory
.1.3.6.1.4.1.2.6.2.13.2.3.2 · 1 row entry · 20 columns
Open in standard view 
Portion of the APPN topology database
that describes all of the APPN transmissions groups
used by the APPN network nodes.
ibmappnNnTgTopologyEntry entry .1.3.6.1.4.1.2.6.2.13.2.3.2.1
This table requires three indexes to provide a
unique index. The indexes are the owning or originating
CPname, the destination CPname, and the TG number.
Indexes
No indexes recorded
Column Syntax OID
ibmappnNnTgOwner mandatory
Administratively-assigned name for the
originating node for this TG. The format
is NETID.CPNAME and is the same name
specified in the node table.
OctetString .1.3.6.1.4.1.2.6.2.13.2.3.2.1.1
ibmappnNnTgDest mandatory
Administratively-assigned fully-qualified
network name for the destination node for this TG.
OctetString .1.3.6.1.4.1.2.6.2.13.2.3.2.1.2
ibmappnNnTgNum mandatory
Number associated with this
transmission group. Range is 0-255.
Integer32 .1.3.6.1.4.1.2.6.2.13.2.3.2.1.3
ibmappnNnTgFrsn mandatory
Flow reduction sequence numbers (FRSNs) are associated
with Topology Database Updates (TDUs) and are unique
only within each APPN network node. A TDU can be
associated with multiple APPN resources. This FRSN
indicates…
Integer32 .1.3.6.1.4.1.2.6.2.13.2.3.2.1.4
ibmappnNnTgEntryTimeLeft mandatory
Number of days before deletion of this
network node TG entry. Range is 0-31.
Integer32 .1.3.6.1.4.1.2.6.2.13.2.3.2.1.5
ibmappnNnTgDestVirtual mandatory
Indicates whether the destination node is
a virtual node.
Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.2.1.6
ibmappnNnTgDlcData mandatory
DLC specific data related to the link connection
network.
Token-Ring - MAC/SAP
X.25 Switched - dial digits
X.21 Switched - dial digits
Circuit Swtch - dial digits
OctetString .1.3.6.1.4.1.2.6.2.13.2.3.2.1.7
ibmappnNnTgRsn mandatory
Current owning node's resource sequence number
for this resource.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.6.2.13.2.3.2.1.8
ibmappnNnTgOperational mandatory
Indicates whether the transmission group

is operational.
Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.2.1.9
ibmappnNnTgQuiescing mandatory
Indicates whether the transmission group
is quiescing.
Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.2.1.10
ibmappnNnTgCpCpSession mandatory
Indicates whether CP-CP sessions are supported on this TG.
Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.2.1.11
ibmappnNnTgEffCap mandatory
The effective capacity is an integer value that indicates
the kilo bits per second.
It is derived from the link bandwidth and maximum load
factor with the range of 0 thru 603,979,776.
This is an administratively assigne…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.6.2.13.2.3.2.1.12
ibmappnNnTgConnCost mandatory
Cost per connect time: a value representing
the relative cost per unit of time to use
the TG. Range is from 0, which means no cost,
to 255, which indicates maximum cost.
This is an administratively assigned value associ…
Integer32 .1.3.6.1.4.1.2.6.2.13.2.3.2.1.13
ibmappnNnTgByteCost mandatory
Relative cost of transmitting a byte over this link.
Range is from 0 (lowest cost) to 255.
This is an administratively assigned value associated
with this TG.
Integer32 .1.3.6.1.4.1.2.6.2.13.2.3.2.1.14
ibmappnNnTgSecurity mandatory
The security is represented as an integer with a range of
1 thru 255 with the most common values enumerated as
defined above.
This is an administratively assigned value associated
with this TG.
Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.2.1.15
ibmappnNnTgDelay mandatory
Relative amount of time that it takes for a signal to
travel the length of the logical link. This time is
represented in micro seconds, with some of the more
common values enumerated.
This is an administratively assign…
Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.2.1.16
ibmappnNnTgModemClass mandatory
This is used to have multiple images for a
connection network. For a connection network
it is the same as in the TG vector; for
a non-connection network it is X'00'.
Integer32 .1.3.6.1.4.1.2.6.2.13.2.3.2.1.17
ibmappnNnTgUsr1 mandatory
First user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with this TG.
Integer32 .1.3.6.1.4.1.2.6.2.13.2.3.2.1.18
ibmappnNnTgUsr2 mandatory
Second user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with this TG.
Integer32 .1.3.6.1.4.1.2.6.2.13.2.3.2.1.19
ibmappnNnTgUsr3 mandatory
Third user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with this TG.
Integer32 .1.3.6.1.4.1.2.6.2.13.2.3.2.1.20

ibmappnNnTopologyFRTable

table mandatory
.1.3.6.1.4.1.2.6.2.13.2.3.3 · 1 row entry · 14 columns
Open in standard view 
Portion of the APPN routing table
that describes all of the APPN network nodes
and virtual nodes known to this node.
ibmappnNnTopologyFREntry entry .1.3.6.1.4.1.2.6.2.13.2.3.3.1
This table is indexed by two columns:
FRSN, followed by fully-qualified node name.
Indexes
No indexes recorded
Column Syntax OID
ibmappnNnNodeFRName mandatory
Administratively-assigned network name that is locally
defined at each network node in the format NETID.CPNAME.
OctetString .1.3.6.1.4.1.2.6.2.13.2.3.3.1.1
ibmappnNnNodeFRFrsn mandatory
Flow reduction sequence numbers (FRSNs) are associated
with Topology Database Updates (TDUs) and are unique
only within each APPN network node. A TDU can be
associated with multiple APPN resources. This FRSN
indicates …
Integer32 .1.3.6.1.4.1.2.6.2.13.2.3.3.1.2
ibmappnNnNodeFREntryTimeLeft mandatory
Number of days before deletion of this
network node entry. Range is 0-31.
Integer32 .1.3.6.1.4.1.2.6.2.13.2.3.3.1.3
ibmappnNnNodeFRType mandatory
Type of APPN node.
Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.3.1.4
ibmappnNnNodeFRRsn mandatory
Resource sequence number that is assigned and
controlled by the network node that owns this
resource. This is always an even 32-bit number
unless an error has occurred.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.6.2.13.2.3.3.1.5
ibmappnNnNodeFRRouteAddResist mandatory
Route addition resistance
indicates the relative desirability
of using this node for intermediate session traffic.
The value, which can be any integer 0-255,
is used in route computation. The lower the value,
the more …
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.6.2.13.2.3.3.1.6
ibmappnNnNodeFRCongested mandatory
Indicates whether this node is congested.
This node is not be included in route selection
by other nodes when this congestion exists.
Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.3.1.7
ibmappnNnNodeFRIsrDepleted mandatory
Indicates whether intermediate session
routing resources are depleted. This node is
not included in intermediate route selection
by other nodes when resources are depleted.
Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.3.1.8
ibmappnNnNodeFREndptDepleted mandatory
Indicates whether session endpoint resources are depleted.
Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.3.1.9
ibmappnNnNodeFRQuiescing mandatory
Indicates whether the node is quiescing.
This node is not included in route selection
by other nodes when the node is quiescing.
Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.3.1.10
ibmappnNnNodeFRGateway mandatory
Indicates whether the node provide gateway functions.
Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.3.1.11
ibmappnNnNodeFRCentralDirectory mandatory
Indicates whether the node is central directory.
Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.3.1.12
ibmappnNnNodeFRIsr mandatory
Indicates whether the node supports intermediate session
routing (ISR).
Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.3.1.13
ibmappnNnNodeFRChainSupport mandatory
Indicates whether the node supports chaining.
Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.3.1.14

ibmappnNnTgTopologyFRTable

table mandatory
.1.3.6.1.4.1.2.6.2.13.2.3.4 · 1 row entry · 20 columns
Open in standard view 
Portion of the APPN topology database
that describes all of the APPN transmissions groups
used by the APPN network nodes.
ibmappnNnTgTopologyFREntry entry .1.3.6.1.4.1.2.6.2.13.2.3.4.1
This table is indexed by four columns:
FRSN, TG owner fully-qualified node name,
TG destination fully-qualified node name, and TG number.
Indexes
No indexes recorded
Column Syntax OID
ibmappnNnTgFROwner mandatory
Administratively-assigned name for the
originating node for this TG. The format
is NETID.CPNAME and is the same name
specified in the node table.
OctetString .1.3.6.1.4.1.2.6.2.13.2.3.4.1.1
ibmappnNnTgFRDest mandatory
Administratively-assigned fully-qualified
network name for the destination node for this TG.
OctetString .1.3.6.1.4.1.2.6.2.13.2.3.4.1.2
ibmappnNnTgFRNum mandatory
Number associated with this
transmission group. Range is 0-255.
Integer32 .1.3.6.1.4.1.2.6.2.13.2.3.4.1.3
ibmappnNnTgFRFrsn mandatory
Flow reduction sequence numbers (FRSNs) are associated
with Topology Database Updates (TDUs) and are unique
only within each APPN network node. A TDU can be
associated with multiple APPN resources. This FRSN
indicates…
Integer32 .1.3.6.1.4.1.2.6.2.13.2.3.4.1.4
ibmappnNnTgFREntryTimeLeft mandatory
Number of days before deletion of this
network node TG entry. Range is 0-31.
Integer32 .1.3.6.1.4.1.2.6.2.13.2.3.4.1.5
ibmappnNnTgFRDestVirtual mandatory
Indicates whether the destination node is
a virtual node.
Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.4.1.6
ibmappnNnTgFRDlcData mandatory
DLC specific data related to the link connection
network.
Token-Ring - MAC/SAP
X.25 Switched - dial digits
X.21 Switched - dial digits
Circuit Swtch - dial digits
OctetString .1.3.6.1.4.1.2.6.2.13.2.3.4.1.7
ibmappnNnTgFRRsn mandatory
Current owning node's resource sequence number
for this resource.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.6.2.13.2.3.4.1.8
ibmappnNnTgFROperational mandatory
Indicates whether the transmission group
is operational.
Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.4.1.9
ibmappnNnTgFRQuiescing mandatory
Indicates whether the transmission group
is quiescing.
Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.4.1.10
ibmappnNnTgFRCpCpSession mandatory
Indicates whether CP-CP sessions are supported on this TG.
Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.4.1.11
ibmappnNnTgFREffCap mandatory
The effective capacity is an integer value that indicates
the kilo bits per second.
It is derived from the link bandwidth and maximum load
factor with the range of 0 thru 603,979,776.
This is an administratively assigne…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.6.2.13.2.3.4.1.12
ibmappnNnTgFRConnCost mandatory
Cost per connect time: a value representing
the relative cost per unit of time to use
the TG. Range is from 0, which means no cost,
to 255, which indicates maximum cost.
This is an administratively assigned value associ…
Integer32 .1.3.6.1.4.1.2.6.2.13.2.3.4.1.13
ibmappnNnTgFRByteCost mandatory
Relative cost of transmitting a byte over this link.
Range is from 0 (lowest cost) to 255.
This is an administratively assigned value associated
with this TG.
Integer32 .1.3.6.1.4.1.2.6.2.13.2.3.4.1.14
ibmappnNnTgFRSecurity mandatory
The security is represented as an integer with a range of
1 thru 255 with the most common values enumerated as
defined above.
This is an administratively assigned value associated
with this TG.
Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.4.1.15
ibmappnNnTgFRDelay mandatory
Relative amount of time that it takes for a signal to
travel the length of the logical link. This time is
represented in micro seconds, with some of the more
common values enumerated.
This is an administratively assign…
Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.4.1.16
ibmappnNnTgFRModemClass mandatory
This is used to have multiple images for a

connection network. For a connection network
it is the same as in the TG vector; for
a non-connection network it is X'00'.
Integer32 .1.3.6.1.4.1.2.6.2.13.2.3.4.1.17
ibmappnNnTgFRUsr1 mandatory
First user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with this TG.
Integer32 .1.3.6.1.4.1.2.6.2.13.2.3.4.1.18
ibmappnNnTgFRUsr2 mandatory
Second user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with this TG.
Integer32 .1.3.6.1.4.1.2.6.2.13.2.3.4.1.19
ibmappnNnTgFRUsr3 mandatory
Third user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with this TG.
Integer32 .1.3.6.1.4.1.2.6.2.13.2.3.4.1.20

ibmappnLocalTgTable

table mandatory
.1.3.6.1.4.1.2.6.2.13.3.1.3.1 · 1 row entry · 17 columns
Open in standard view 
TG Table describes all of the TGs owned by this
node.  The TG destination can be a virtual
node, network node, len, or end node.
ibmappnLocalTgEntry entry .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1
This table is indexed by the destination CPname
and the TG number.
Indexes
No indexes recorded
Column Syntax OID
ibmappnLocalTgDest mandatory
Administratively-assigned name for the
destination node for this TG.
This is the fully-qualified network node
name.
OctetString .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.1
ibmappnLocalTgNum mandatory
Number associated with this transmission group.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.2
ibmappnLocalTgDestVirtual mandatory
Indicates whether the destination node is
a Virtual node.
Enumeration .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.3
ibmappnLocalTgDlcData mandatory
DLC specific data related to the link connection
network.
Token-Ring - MAC/SAP
X.25 Switched - dial digits
X.21 Switched - dial digits
Circuit Swtch - dial digits
OctetString .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.4
ibmappnLocalTgRsn mandatory
The resource sequence number is assigned and
controlled by the network node that owns this

resource. This is always an even unsigned
number unless an error has occurred.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.5
ibmappnLocalTgQuiescing mandatory
Indicates whether the Transmission Group
is quiescing.
Enumeration .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.6
ibmappnLocalTgOperational mandatory
Indicates whether the Transmission Group
is operational.
Enumeration .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.7
ibmappnLocalTgCpCpSession mandatory
Indicates whether the CP-CP Sessions are
supported on this TG.
Enumeration .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.8
ibmappnLocalTgEffCap mandatory
The effective capacity is an integer value that indicates
the actual kilo bits per second.
It is derived from the link bandwidth and maximum load
factor with the range of 0 thru 603,979,776.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.9
ibmappnLocalTgConnCost mandatory
Cost per connect time: a value representing
the relative cost per unit of time to use
the TG. Range is from 0, which means no cost,
to 255.
Integer32 .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.10
ibmappnLocalTgByteCost mandatory
Relative cost of transmitting a byte over this link.
Range is from 0 (lowest cost) to 255.
Integer32 .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.11
ibmappnLocalTgSecurity mandatory
Security level for this TG.
Enumeration .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.12
ibmappnLocalTgDelay mandatory
Relative amount of time that it takes for a signal to
travel the length of the logical link. This time is
represented in micro seconds, with some of the more
common values enumerated.
Enumeration .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.13
ibmappnLocalTgModemClass mandatory
This is used to have multiple images for a
connection network. For a connection network
it is the same as in the TG vector and for
a non-connection network it is zero.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.14
ibmappnLocalTgUsr1 mandatory
Value of the first user-defined TG
characteristic for this TG.
Range is 0-255.
Integer32 .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.15
ibmappnLocalTgUsr2 mandatory
Value of the second user-defined TG
characteristic for this TG.
Range is 0-255.
Integer32 .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.16
ibmappnLocalTgUsr3 mandatory
Value of the third user-defined TG
characteristic for this TG.
Range is 0-255.
Integer32 .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.17

ibmappnLocalEnTable

table mandatory
.1.3.6.1.4.1.2.6.2.13.3.2.1 · 1 row entry · 3 columns
Open in standard view 
Portion of the APPN topology
database that describes the end
nodes known to this node.
ibmappnLocalEnEntry entry .1.3.6.1.4.1.2.6.2.13.3.2.1.1
This table is indexed by the end node CPname.
Indexes
No indexes recorded
Column Syntax OID
ibmappnLocalEnName mandatory
Administratively-assigned fully-qualified
name of end node in the format NETID.CPNAME.
OctetString .1.3.6.1.4.1.2.6.2.13.3.2.1.1.1
ibmappnLocalEnEntryTimeLeft mandatory
Number of days before deletion of this
end node entry. Range is 0-31.
Integer32 .1.3.6.1.4.1.2.6.2.13.3.2.1.1.2
ibmappnLocalEnType mandatory
Type of APPN node (must always be a len or end node).
Enumeration .1.3.6.1.4.1.2.6.2.13.3.2.1.1.3

ibmappnLocalEnTgTable

table mandatory
.1.3.6.1.4.1.2.6.2.13.3.2.2 · 1 row entry · 17 columns
Open in standard view 
Table describing all of the TGs owned by the
end nodes known to this node.
The TG destination can be a virtual
node, network node, or end node.
ibmappnLocalEnTgEntry entry .1.3.6.1.4.1.2.6.2.13.3.2.2.1
This table requires multiple indexes to uniquely
identify each TG. They are originating CPname,
destination CPname, and the TG number.
Indexes
No indexes recorded
Column Syntax OID
ibmappnLocalEnTgOrigin mandatory
Administratively-assigned name for the
origination node for this TG.
This is the fully-qualified network name.
OctetString .1.3.6.1.4.1.2.6.2.13.3.2.2.1.1
ibmappnLocalEnTgDest mandatory
Administratively-assigned name for the
destination node for this TG.
This is the fully-qualified network name.
OctetString .1.3.6.1.4.1.2.6.2.13.3.2.2.1.2
ibmappnLocalEnTgNum mandatory
Number associated with this transmission group.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.6.2.13.3.2.2.1.3
ibmappnLocalEnTgEntryTimeLeft mandatory
Number of days before deletion of this
end node TG entry. Range is 0-31.
Integer32 .1.3.6.1.4.1.2.6.2.13.3.2.2.1.4
ibmappnLocalEnTgDestVirtual mandatory
Indicates whether the destination node is
a virtual node.
Enumeration .1.3.6.1.4.1.2.6.2.13.3.2.2.1.5
ibmappnLocalEnTgDlcData mandatory
DLC specific data related to the link connection
network.
Token-Ring - MAC/SAP

X.25 Switched - dial digits
X.21 Switched - dial digits
Circuit Swtch - dial digits
OctetString .1.3.6.1.4.1.2.6.2.13.3.2.2.1.6
ibmappnLocalEnTgOperational mandatory
Indicates whether the Transmission Group is operational.
Enumeration .1.3.6.1.4.1.2.6.2.13.3.2.2.1.7
ibmappnLocalEnTgCpCpSession mandatory
Indicates whether CP-CP sessions are supported on this TG.
Enumeration .1.3.6.1.4.1.2.6.2.13.3.2.2.1.8
ibmappnLocalEnTgEffCap mandatory
The effective capacity is an integer value that indicates
the actual kilo bits per second.
It is derived from the link bandwidth and maximum load
factor with the range of 0 thru 603,979,776.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.6.2.13.3.2.2.1.9
ibmappnLocalEnTgConnCost mandatory
Cost per connect time: a value representing
the relative cost per unit of time to use
the TG. Range is from 0, which means no cost,
to 255.
Integer32 .1.3.6.1.4.1.2.6.2.13.3.2.2.1.10
ibmappnLocalEnTgByteCost mandatory
Relative cost of transmitting a byte over this link.
Range is from 0, which means no cost, to 255.
Integer32 .1.3.6.1.4.1.2.6.2.13.3.2.2.1.11
ibmappnLocalEnTgSecurity mandatory
Security level for this TG.
Enumeration .1.3.6.1.4.1.2.6.2.13.3.2.2.1.12
ibmappnLocalEnTgDelay mandatory
Relative amount of time that it takes for a signal to
travel the length of the logical link. This time is
represented in micro seconds, with some of the more
common values enumerated.
Enumeration .1.3.6.1.4.1.2.6.2.13.3.2.2.1.13
ibmappnLocalEnTgModemClass mandatory
This is used to have multiple images for a
connection network. For a connection network
it is the same as in the TG vector and for
a non connection network it is zero.
Integer32 .1.3.6.1.4.1.2.6.2.13.3.2.2.1.14
ibmappnLocalEnTgUsr1 mandatory
First user-defined TG characteristic
for this TG. Range of values is 0-255.
Integer32 .1.3.6.1.4.1.2.6.2.13.3.2.2.1.15
ibmappnLocalEnTgUsr2 mandatory
Second user-defined TG characteristic
for this TG. Range of values is 0-255.
Integer32 .1.3.6.1.4.1.2.6.2.13.3.2.2.1.16
ibmappnLocalEnTgUsr3 mandatory
Third user-defined TG characteristic
for this TG. Range of values is 0-255.
Integer32 .1.3.6.1.4.1.2.6.2.13.3.2.2.1.17

ibmappnDirTable

table mandatory
.1.3.6.1.4.1.2.6.2.13.5.2 · 1 row entry · 6 columns
Open in standard view 
Table containing information about
all known LUs and TPs.
ibmappnDirEntry entry .1.3.6.1.4.1.2.6.2.13.5.2.1
This table is indexed by the LU name.
Indexes
No indexes recorded
Column Syntax OID
ibmappnDirLuName mandatory
Fully-qualified network LU name in the
domain of the serving network node.
OctetString .1.3.6.1.4.1.2.6.2.13.5.2.1.1
ibmappnDirServerName mandatory
Fully-qualified control point (CP) name of the
network node server. For unassociated end node
entries, the end node fully-qualified name
is returned.
OctetString .1.3.6.1.4.1.2.6.2.13.5.2.1.2
ibmappnDirLuOwnerName mandatory
Fully-qualified CP name of the node at which
the LU is located. This name is the same as the
serving NN name when the LU is located at a
network node or an unassociated end node. It is
also the same as the fully-quali…
OctetString .1.3.6.1.4.1.2.6.2.13.5.2.1.3
ibmappnDirLuLocation mandatory
Specifies the location of the LU.
Enumeration .1.3.6.1.4.1.2.6.2.13.5.2.1.4
ibmappnDirType mandatory
Directory types are:
1 - Home
The LU is in the domain of the local network node
and the LU information has been configured at the
local node.

2 - Cache
The LU has previously been l…
Enumeration .1.3.6.1.4.1.2.6.2.13.5.2.1.5
ibmappnDirWildCard mandatory
1 - Other means unknown type of LU entry.
2 - Expliced-entry means the full LUNAME will be used
for locating this LU.
3 - Partial-wildcard means only the non-blank portions
of the LUNAME will be used for locatin…
Enumeration .1.3.6.1.4.1.2.6.2.13.5.2.1.6

ibmappnCosModeTable

table mandatory
.1.3.6.1.4.1.2.6.2.13.6.1 · 1 row entry · 2 columns
Open in standard view 
Table representing all of the defined
mode names for this node.  The table
contains the matching COS name.
ibmappnCosModeEntry entry .1.3.6.1.4.1.2.6.2.13.6.1.1
This table is indexed by the Mode Name.
Indexes
No indexes recorded
Column Syntax OID
ibmappnCosModeName mandatory
Administratively-assigned name for this
mode entry.
OctetString .1.3.6.1.4.1.2.6.2.13.6.1.1.1
ibmappnCosModeCosName mandatory
An administratively assigned name for this
Class of Service.
OctetString .1.3.6.1.4.1.2.6.2.13.6.1.1.2

ibmappnCosNameTable

table mandatory
.1.3.6.1.4.1.2.6.2.13.6.2 · 1 row entry · 2 columns
Open in standard view 
Table representing all of the defined class-of-service
names for this node.  The COS node and TG tables are
accessed using the same index, which is the COS name.
ibmappnCosNameEntry entry .1.3.6.1.4.1.2.6.2.13.6.2.1
The COS name is the index to this table.
Indexes
No indexes recorded
Column Syntax OID
ibmappnCosName mandatory
Administratively-assigned name for this
class of service.
OctetString .1.3.6.1.4.1.2.6.2.13.6.2.1.1
ibmappnCosTransPriority mandatory
Transmission priority for this
class of service. Values are:
Low
Medium
High
Network
Enumeration .1.3.6.1.4.1.2.6.2.13.6.2.1.2

ibmappnCosNodeRowTable

table mandatory
.1.3.6.1.4.1.2.6.2.13.6.3 · 1 row entry · 7 columns
Open in standard view 
This table contains all node-row information for all
class of service in this node.
ibmappnCosNodeRowEntry entry .1.3.6.1.4.1.2.6.2.13.6.3.1
The COS name is the first index and a integer
is the second index to insure a unique index.
Indexes
No indexes recorded
Column Syntax OID
ibmappnCosNodeRowName mandatory
Administratively-assigned name for this
class of service.
OctetString .1.3.6.1.4.1.2.6.2.13.6.3.1.1
ibmappnCosNodeRowIndex mandatory
Index of COS name. This same value is used
to access the node and TG COS tables.
Range of values is 0-255.
Integer32 .1.3.6.1.4.1.2.6.2.13.6.3.1.2
ibmappnCosNodeRowWgt mandatory
Weight to be associated with the nodes
that fit the criteria specified by this node row.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.2.6.2.13.6.3.1.3
ibmappnCosNodeRowResistMin mandatory
Minimum route addition resistance value
for this node. Range of values is 0-255.
The lower the value, the more desirable
the node is for intermediate routing.
Integer32 .1.3.6.1.4.1.2.6.2.13.6.3.1.4
ibmappnCosNodeRowResistMax mandatory
Maximum route addition resistance value
for this node. Range of values is 0-255.
The lower the value, the more desirable
the node is for intermediate routing.
Integer32 .1.3.6.1.4.1.2.6.2.13.6.3.1.5
ibmappnCosNodeRowMinCongestAllow mandatory
Indicates whether low congestion will be
tolerated. The minimum and maximum parameters
will allow specifying either low-congested,
high-congested, or either to be used.
Enumeration .1.3.6.1.4.1.2.6.2.13.6.3.1.6
ibmappnCosNodeRowMaxCongestAllow mandatory
Indicates whether high congestion will be
tolerated. The minimum and maximum parameters

will allow specifying either low-congested,
high-congested, or either to be used.
Enumeration .1.3.6.1.4.1.2.6.2.13.6.3.1.7

ibmappnCosTgRowTable

table mandatory
.1.3.6.1.4.1.2.6.2.13.6.4 · 1 row entry · 19 columns
Open in standard view 
Table containing all the Tg-row information for all
class of service defined in this node.
ibmappnCosTgRowEntry entry .1.3.6.1.4.1.2.6.2.13.6.4.1
The TgRowName and the TgRowIndex are the index
for this table.
Indexes
No indexes recorded
Column Syntax OID
ibmappnCosTgRowName mandatory
Administratively-assigned name for this
class of service.
OctetString .1.3.6.1.4.1.2.6.2.13.6.4.1.1
ibmappnCosTgRowIndex mandatory
Index of COS name. This same value is used
to access the node and TG COS tables.
Integer32 .1.3.6.1.4.1.2.6.2.13.6.4.1.2
ibmappnCosTgRowWgt mandatory
Weight to be associated with the nodes
that fit the criteria specified by this tg-row.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.2.6.2.13.6.4.1.3
ibmappnCosTgRowEffCapMin mandatory
Minimum acceptable speed for this Class of Service.
The effective capacity is an integer value that indicates
the actual kilo bits per second.
It is derived from the link bandwidth and maximum load
factor with the range…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.6.2.13.6.4.1.4
ibmappnCosTgRowEffCapMax mandatory
Maximum acceptable speed for this Class of Service.
The effective capacity is an integer value that indicates
the actual kilo bits per second.
It is derived from the link bandwidth and maximum load
factor with the range…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.6.2.13.6.4.1.5
ibmappnCosTgRowConnCostMin mandatory
Minimum acceptable cost per connect time
for this Class of Service.
Cost per connect time: a value representing
the relative cost per unit of time to use
the TG. Range is from 0, which means no cost,
to 255.
Integer32 .1.3.6.1.4.1.2.6.2.13.6.4.1.6
ibmappnCosTgRowConnCostMax mandatory
Maximum acceptable cost per connect time
for this Class of Service.
Cost per connect time: a value representing
the relative cost per unit of time to use
the TG. Range is from 0, which means no cost,
to 255.
Integer32 .1.3.6.1.4.1.2.6.2.13.6.4.1.7
ibmappnCosTgRowByteCostMin mandatory
Minimum acceptable cost per byte
for this Class of Service.
Integer32 .1.3.6.1.4.1.2.6.2.13.6.4.1.8
ibmappnCosTgRowByteCostMax mandatory
Maximum acceptable cost per byte
for this Class of Service.
Integer32 .1.3.6.1.4.1.2.6.2.13.6.4.1.9
ibmappnCosTgRowSecurityMin mandatory
Minimum acceptable security

for this Class of Service.
Enumeration .1.3.6.1.4.1.2.6.2.13.6.4.1.10
ibmappnCosTgRowSecurityMax mandatory
Maximum acceptable security
for this Class of Service.
Enumeration .1.3.6.1.4.1.2.6.2.13.6.4.1.11
ibmappnCosTgRowDelayMin mandatory
Minimum acceptable propagation delay for this class of service.
Relative amount of time that it takes for a signal to travel
the length of the logical link. This time is represented in
micro seconds, with the more valu…
Enumeration .1.3.6.1.4.1.2.6.2.13.6.4.1.12
ibmappnCosTgRowDelayMax mandatory
Maximum acceptable propagation delay for this class of service.
Relative amount of time that it takes for a signal to travel
the length of the logical link. This time is represented in
micro seconds, with the more valu…
Enumeration .1.3.6.1.4.1.2.6.2.13.6.4.1.13
ibmappnCosTgRowUsr1Min mandatory
Minimum acceptable value for this
user defined characteristic.
Range of values is 0-255.
Integer32 .1.3.6.1.4.1.2.6.2.13.6.4.1.14
ibmappnCosTgRowUsr1Max mandatory
Maximum acceptable value for this
user defined characteristic.
Range of values is 0-255.
Integer32 .1.3.6.1.4.1.2.6.2.13.6.4.1.15
ibmappnCosTgRowUsr2Min mandatory
Minimum acceptable value for this
user defined characteristic.
Range of values is 0-255.
Integer32 .1.3.6.1.4.1.2.6.2.13.6.4.1.16
ibmappnCosTgRowUsr2Max mandatory
A Maximum acceptable value for this
user defined characteristic.
Integer32 .1.3.6.1.4.1.2.6.2.13.6.4.1.17
ibmappnCosTgRowUsr3Min mandatory
Minimum acceptable value for this
user defined characteristic.
Range of values is 0-255.
Integer32 .1.3.6.1.4.1.2.6.2.13.6.4.1.18
ibmappnCosTgRowUsr3Max mandatory
Maximum acceptable value for this
user defined characteristic.
Range of values is 0-255.
Integer32 .1.3.6.1.4.1.2.6.2.13.6.4.1.19