IANA-FINISHER-MIB
This MIB module defines a set of finishing-related
TEXTUAL-CONVENTIONs for use in Finisher MIB (RFC 3806)
and other MIBs which need to specify finishing
mechanism details.
Any additions or changes to the contents of this MIB
module require either publication of an RFC, or
Designated Expert Review as defined in RFC 2434,
Guidelines for Writing an IANA Considerations Section
in RFCs. The Designated Expert will be selected by
the IESG Area Director(s) of the Applications Area.
Copyright (C) The Internet Society (2004). The
initial version of this MIB module was published
in RFC 3806. For full legal notices see the RFC
itself or see:
http://www.ietf.org/copyrights/ianamib.html
ianafinisherMIB
1.3.6.1.2.1.110
Imported Objects
| SNMPv2-SMI | mib-2 MODULE-IDENTITY |
| SNMPv2-TC | TEXTUAL-CONVENTION |
Type Definitions (13)
| FinAttributeTypeTC | Enumeration |
other(1)deviceName(3)deviceVendorName(4)deviceModel(5)deviceVersion(6)deviceSerialNumber(7)maximumSheets(8)finProcessOffsetUnits(9)finReferenceEdge(10)finAxisOffset(11)finJogEdge(12)finHeadLocation(13)finOperationRestrictions(14)finNumberOfPositions(15)namedConfiguration(16)finMediaTypeRestriction(17)finPrinterInputTraySupported(18)finPreviousFinishingOperation(19)finNextFinishingOperation(20)stitchingType(30)stitchingDirection(31)foldingType(40)bindingType(50)punchHoleType(80)punchHoleSizeLongDim(81)punchHoleSizeShortDim(82)punchPattern(83)slittingType(100)wrappingType(130)stackOutputType(160)stackOffset(161)stackRotation(162) |
| FinBindingTypeTC | Enumeration |
other(1)unknown(2)tape(4)plastic(5)velo(6)perfect(7)spiral(8)adhesive(9)comb(10)padding(11)plasticMultiRing(12) |
| FinDeviceTypeTC | Enumeration |
other(1)unknown(2)stitcher(3)folder(4)binder(5)trimmer(6)dieCutter(7)puncher(8)perforater(9)slitter(10)separationCutter(11)imprinter(12)wrapper(13)bander(14)makeEnvelope(15)stacker(16)sheetRotator(17)inserter(18) |
| FinEdgeTC | Enumeration |
topEdge(3)bottomEdge(4)leftEdge(5)rightEdge(6) |
| FinFoldingTypeTC | Enumeration |
other(1)unknown(2)zFold(3)halfFold(4)letterFold(5) |
| FinPunchHoleTypeTC | Enumeration |
other(1)unknown(2)round(3)oblong(4)square(5)rectangular(6)star(7) |
| FinPunchPatternTC | Enumeration |
other(1)unknown(2)twoHoleUSTop(4)threeHoleUS(5)twoHoleDIN(6)fourHoleDIN(7)twentyTwoHoleUS(8)nineteenHoleUS(9)twoHoleMetric(10)swedish4Hole(11)twoHoleUSSide(12)fiveHoleUS(13)sevenHoleUS(14)mixed7H4S(15)norweg6Hole(16)metric26Hole(17)metric30Hole(18) |
| FinSlittingTypeTC | Enumeration |
other(1)unknown(2)slitAndSeparate(4)slitAndMerge(5) |
| FinStackOutputTypeTC | Enumeration |
other(1)unknown(2)straight(4)offset(5)crissCross(6) |
| FinStitchingAngleTypeTC | Enumeration |
unknown(2)horizontal(3)vertical(4)slanted(5) |
| FinStitchingDirTypeTC | Enumeration |
unknown(2)topDown(3)bottomUp(4) |
| FinStitchingTypeTC | Enumeration |
other(1)unknown(2)stapleTopLeft(4)stapleBottomLeft(5)stapleTopRight(6)stapleBottomRight(7)saddleStitch(8)edgeStitch(9)stapleDual(10) |
| FinWrappingTypeTC | Enumeration |
other(1)unknown(2)shrinkWrap(4)paperWrap(5) |
Objects (1)
ianafinisherMIB
|
.1.3.6.1.2.1.110 |