Standard view Table view

HUAWEI-RIPV2-EXT-MIB

        The HUAWEI-RIPv2-EXT-MIB.mib contains objects to configure RIP
module, including query RIP process, RIP VPN-instance configuration
and status. This MIB module objects indicate hwRip2ProcInstTable.
                 
    RIP can support many processes, but mib can support only one of
them. To get more RIP configuration, it is required to locate one 
specified RIP process.
hwRipv2Ext 1.3.6.1.4.1.2011.5.25.120
Imported Objects
HUAWEI-MIB hwDatacomm
SNMPv2-CONF MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMI Counter64 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TC DisplayString RowStatus
Objects (14)
hwRipv2Ext .1.3.6.1.4.1.2011.5.25.120
hwRip2ProcInstTable .1.3.6.1.4.1.2011.5.25.120.1
hwRip2ProcInstEntry hwRip2ProcessId .1.3.6.1.4.1.2011.5.25.120.1.1
hwRip2ProcessId Unsigned32 .1.3.6.1.4.1.2011.5.25.120.1.1.1
hwRip2VrfName OctetString .1.3.6.1.4.1.2011.5.25.120.1.1.2
hwRip2CurrentProcId r/w Unsigned32 .1.3.6.1.4.1.2011.5.25.120.1.1.3
hwRip2DBLimit Unsigned32 .1.3.6.1.4.1.2011.5.25.120.1.1.4
hwRip2DBThresholdLevel OctetString .1.3.6.1.4.1.2011.5.25.120.1.1.5
hwRip2Conformance .1.3.6.1.4.1.2011.5.25.120.2
hwRip2Groups .1.3.6.1.4.1.2011.5.25.120.2.1
hwRip2Compliances .1.3.6.1.4.1.2011.5.25.120.2.2
hwRip2Notifications .1.3.6.1.4.1.2011.5.25.120.3
hwRip2TrapsObjects .1.3.6.1.4.1.2011.5.25.120.4
hwRip2InsecureAuthMode OctetString .1.3.6.1.4.1.2011.5.25.120.4.1
Notifications / Traps (4)
NameOIDDescription
hwRip2DBOverFlow
hwRip2CurrentProcId hwRip2DBLimit
.1.3.6.1.4.1.2011.5.25.120.3.1 
A hwRip2DBOverFlow notification signifies that there 
has been maximum number of routes added to RIP database for
the given process and no more routes can be added to RIP by
redistibution or by learning.
          
This notification should be generated when the number of routes
added to RIP database reaches maximum value. RIP process will be suspended at this state.
hwRip2DBOverFlowResume
hwRip2CurrentProcId hwRip2DBLimit hwRip2DBThresholdLevel
.1.3.6.1.4.1.2011.5.25.120.3.2 
A hwRip2DBOverFlowResume notification signifies that the RIP database size has dropped to the
lower threshold. RIP process will resume it's normal operation.
hwRip2AuthModeInsecure
hwRip2InsecureAuthMode
.1.3.6.1.4.1.2011.5.25.120.3.3 
This object indicates that an insecure authentication mode is configured for RIP.
hwRip2AuthModeInsecureClear
hwRip2InsecureAuthMode
.1.3.6.1.4.1.2011.5.25.120.3.4 
This object indicates that the insecure authentication mode configured for RIP is deleted.