HUAWEI-PERFORMANCE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
1
Rows
1
Columns
15
.1.3.6.1.4.1.2011.1.3.4.4.1 · 1 row entry · 15 columns
A list of alarm entries.
prialarmEntry entry .1.3.6.1.4.1.2011.1.3.4.4.1.1
A list of parameters that set up a periodic checking
for alarm conditions. For example, an instance of the
alarmValue object might be named alarmValue.8
Indexes
prialarmIndex
Column Syntax OID
prialarmIndex
An index that uniquely identifies an entry in the
alarm table. Each such entry defines a
diagnostic sample at a particular interval
for an object on the device.
Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.2011.1.3.4.4.1.1.1
prialarmInterval
The interval in seconds over which the data is
sampled and compared with the rising and falling
thresholds. When setting this variable, care
should be taken in the case of deltaValue
sampling - the interval should be s…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.1.3.4.4.1.1.2
prialarmVariable
The object identifier of the particular variable to be
sampled. Only variables that resolve to an ASN.1 primitive
type of INTEGER (INTEGER, Integer32, Counter32, Counter64,
Gauge, or TimeTicks) may be sampled.
RFC1213-MIBDisplayStringr/w
Textual Convention: RFC1213-MIBDisplayString OctetString
.1.3.6.1.4.1.2011.1.3.4.4.1.1.3
prialarmSympol
The string which the alarm line described.
RFC1213-MIBDisplayStringr/w
Textual Convention: RFC1213-MIBDisplayString OctetString
.1.3.6.1.4.1.2011.1.3.4.4.1.1.4
prialarmSampleType
The method of sampling the selected variable and
calculating the value to be compared against the
thresholds. If the value of this object is
absoluteValue(1), the value of the selected variable
will be compared directl…
Enumerationr/w
Enumerated Values:
1absoluteValue
2deltaValue
3changeratioValue
.1.3.6.1.4.1.2011.1.3.4.4.1.1.5
prialarmValue
The value of the statistic during the last sampling
period. For example, if the sample type is deltaValue,
this value will be the difference between the samples
at the beginning and end of the period. If the sample
ty…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.1.3.4.4.1.1.6
prialarmStartupAlarm
The alarm that may be sent when this entry is first
set to valid. If the first sample after this entry
becomes valid is greater than or equal to the
risingThreshold and alarmStartupAlarm is equal to
risingAlarm(1) or r…
Enumerationr/w
Enumerated Values:
1risingAlarm
2fallingAlarm
3risingOrFallingAlarm
.1.3.6.1.4.1.2011.1.3.4.4.1.1.7
prialarmRisingThreshold
A threshold for the sampled statistic. When the current
sampled value is greater than or equal to this threshold,
and the value at the last sampling interval was less than
this threshold, a single event will be generat…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.1.3.4.4.1.1.8
prialarmFallingThreshold
A threshold for the sampled statistic. When the current
sampled value is less than or equal to this threshold,
and the value at the last sampling interval was greater than
this threshold, a single event will be generat…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.1.3.4.4.1.1.9
prialarmRisingEventIndex
The index of the eventEntry that is
used when a rising threshold is crossed. The
eventEntry identified by a particular value of
this index is the same as identified by the same value
of the eventIndex object. If there…
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.2011.1.3.4.4.1.1.10
prialarmFallingEventIndex
The index of the eventEntry that is
used when a falling threshold is crossed. The
eventEntry identified by a particular value of
this index is the same as identified by the same value
of the eventIndex object. If ther…
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.2011.1.3.4.4.1.1.11
prialarmStatCycle
The time alarm line exists. When the value
of prialarmStatType is during(2),set prialarmStatCycle
to decide how long the alarm line exists.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.1.3.4.4.1.1.12
prialarmStatType
It expresses alarm state type.To choose forever(1)
, the alarm line will exist forever. To choose
during(2) , the alarm line will be deleted after
the time setting for 'prialarmStatCycle'.
Enumerationr/w
Enumerated Values:
1forever
2during
.1.3.6.1.4.1.2011.1.3.4.4.1.1.13
prialarmOwner
The entity that configured this entry and is therefore
using the resources assigned to it.
IF-MIBOwnerStringr/w
Textual Convention: IF-MIBOwnerString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.2011.1.3.4.4.1.1.14
prialarmStatus
The status of this alarm entry.
RMON-MIBEntryStatusr/w
Textual Convention: RMON-MIBEntryStatus Enumeration
Type Values:
1valid
2createRequest
3underCreation
4invalid
.1.3.6.1.4.1.2011.1.3.4.4.1.1.15