HUAWEI-MNGT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
12
Rows
12
Columns
55

hwCliUserParaTable

table
.1.3.6.1.4.1.2011.6.3.10.1 · 1 row entry · 11 columns
Open in standard view 
User parameter configuration table, which supports the functions of querying, adding, 
deleting and modifying a user. The index of this table is hwCliUserName.
hwCliUserParaEntry entry .1.3.6.1.4.1.2011.6.3.10.1.1
User parameter configuration table, which supports the functions of querying, adding,
deleting and modifying a user. The index of this entry is hwCliUserName.
Indexes
hwCliUserName
Column Syntax OID
hwCliUserName
Name of the CLI user. The user name is case
insensitive and the user name consists of 6-15 characters.
The minimum length of the name can be configured by user.
The range of the valid characters of the user name is
0x…
OctetString
Constraints:
range: 1-34
 .1.3.6.1.4.1.2011.6.3.10.1.1.1
hwCliUserPassword
Password of the CLI user.
The user can directly modify the password of the CLI user and need not verify
the original password of the CLI user. The user password consists of 16 characters,
including at least one letter a…
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.3.10.1.1.2
hwCliUserLevel
The levels of CLI users.
Options:
1. common(1) -indicates the common user.
2. operator(2) -indicates the operator.
3. administrator(3) -indicates the administrator.
4. super(4) -indicates the sup…
Enumerationr/w
Enumerated Values:
1common
2operator
3administrator
4super
5guest
6custom
 .1.3.6.1.4.1.2011.6.3.10.1.1.3
hwCliUserLogins
The number of user login attempts in one time.
The same user name can be used for login to the device repeatedly.
For example, when two users log in to the device with the same name,
the number of times of re-login is …
Integer32r/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.2011.6.3.10.1.1.4
hwCliUserDecr
Description of CLI user.
You can add the basic information about the user,
such as the email box, telephone number, or other contact information.
OctetStringr/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.6.3.10.1.1.5
hwCliUserRowStatus
Operation status of CLI user, the CLI user can be added, deleted and modified.
The user level, number of times of re-login, user profile, available user password
and user description must be bound to the user when the …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.6.3.10.1.1.6
hwCliUserprofile
The name of user profile that CLI user belongs to.
OctetStringr/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.2011.6.3.10.1.1.7
hwCliUserAccessType
The user can log in to the device through the following three modes.
Options:
1. cli(1) -indicates CLI terminal.
2. oss(2) -indicates OSS terminal.
3. web(4) -indicates Web terminal.
Enumerationr/w
Enumerated Values:
1cli
2oss
4web
 .1.3.6.1.4.1.2011.6.3.10.1.1.8
hwCliUserTimeout obsolete
This object is not used any longer. Login timeout duration of the user.
If the CLI user performs no operation during a period,
the user automatically quits the system.
This object is used to query and set the login t…
Integer32r/w
Constraints:
range: 1-120
 .1.3.6.1.4.1.2011.6.3.10.1.1.9
hwCliUserNameLastDays
Service life of the user name.
The hwCliUserNameLastDays value of -1 indicates the username expired.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.3.10.1.1.10
hwCliUserPwdLastDays
Service life of the user password.
The hwCliUserPwdLastDays value of -1 indicates the user password expired.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.3.10.1.1.11

hwCliClientTable

table
.1.3.6.1.4.1.2011.6.3.10.2 · 1 row entry · 9 columns
Open in standard view 
CLI online user information table, which can be used to 
force an online user to go offline.
The table cannot be created and deleted. 
The table supports only the functions of querying the user 
terminal status and forcing an online user to go offline.
The index of this table is hwCliClientID.
hwCliClientEntry entry .1.3.6.1.4.1.2011.6.3.10.2.1
CLI online user information table, which can be used to
force an online user to go offline.
The table cannot be created and deleted.
The table supports only the functions of querying the user
terminal status and forci…
Indexes
hwCliClientID
Column Syntax OID
hwCliClientID
Client ID(1..255). Index object, this ID is allocated by device.
Value 255 indicates that the device does not allocate client IDs.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.2011.6.3.10.2.1.1
hwCliClientUserName
User name of client.
OctetString
Constraints:
range: 1-34
 .1.3.6.1.4.1.2011.6.3.10.2.1.2
hwCliClientType
Type of client. The modes of login to the client are as follows:
Options:
1. serial(1) -indicates serial port.
2. telnet(2) -indicates telnet.
3. proxy(3) -indicates proxy.
4. ssh(4) -indicates ssh.
5. omci(5) …
Enumeration
Enumerated Values:
1serial
2telnet
3proxy
4ssh
5omci
6ethoam
7adminVs
 .1.3.6.1.4.1.2011.6.3.10.2.1.3
hwCliClientIp
The IP address of client.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.3.10.2.1.4
hwCliClientLoginTime
The login time of client.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2011.6.3.10.2.1.5
hwCliClientAdminStatus
Admin status of client, can disconnect client.
Options:
1. disconnect(1) -indicates the user who logs in to the system in the modes
except serial port mode can be forced to go offline when
…
Enumerationr/w
Enumerated Values:
-1connect
1disconnect
 .1.3.6.1.4.1.2011.6.3.10.2.1.6
hwCliUserIdleTimeOut
This object is not used any longer.Idleness timeout duration of the online user.
When the online user is idle for a period longer than the preset time,
the online user automatically quits the system.
This object is use…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.3.10.2.1.7
hwCliClientInetAddressType
The type of address in hwCliClientInetAddress.
Options:
1. unknown(0) -If a user accesses through the serial port,
the IP address type is unknown(0).
2. ipv4(1) -indicates that the IP address type is i…
Enumeration
Enumerated Values:
0unknown
1ipv4
2ipv6
 .1.3.6.1.4.1.2011.6.3.10.2.1.8
hwCliClientInetAddress
The object specifies the IP address of client.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.6.3.10.2.1.9

hwCliUserProfileParaTable

table
.1.3.6.1.4.1.2011.6.3.10.5 · 1 row entry · 6 columns
Open in standard view 
User profile management table, which is used to query, modify, add and delete the user profile.
The user profile is a set of public user attributes, including the user name and password 
validity period, permitted earliest time of login, and permitted latest time of login.
The MIB supports the functions of querying and setting the values of the preceding parameters.
A user needs to be created based on a user profile. In this case, the new user inherits the 
preceding parameter values in the user profile. The index of this table is hwCliUserProfileName.
The index value is the user profile name, it uniquely identifies the user profile. 
By default, four system profiles exist in the system. 
The names of the four system profiles are as follows: 
root, admin, operator and commonuser.
hwCliUserProfileParaEntry entry .1.3.6.1.4.1.2011.6.3.10.5.1
User profile management table, which is used to query, modify, add and delete the user profile.
The user profile is a set of public user attributes, including the user name and password
validity period, permitted earli…
Indexes
hwCliUserProfileName
Column Syntax OID
hwCliUserProfileName
The name of the user profile. The name of the new profile must be different from
the names of the system profiles. The profile name consists of 1-15 characters.
OctetString
Constraints:
range: 1-15
 .1.3.6.1.4.1.2011.6.3.10.5.1.1
hwCliUserNameAvailableInterval
Validity period of user name.
For example, if the validity period of the user name is 10,
it indicates that the user name cannot be used for login after ten days since it is created.
In addition, a message is displaye…
dayUnsigned32r/w
Constraints:
range: 0-999
 .1.3.6.1.4.1.2011.6.3.10.5.1.4
hwCliUserPwdAvailableInterval
Validity period of user password.
For example, if the validity period of the user password is 10,
it indicates that the user password cannot be used for login after ten days since it is created.
In addition, a message i…
dayUnsigned32r/w
Constraints:
range: 0-999
 .1.3.6.1.4.1.2011.6.3.10.5.1.5
hwCliUserLoginTime
Permitted earliest time of login. The user can log in to the system
at any time between 00:00 and 23:59.
OctetStringr/w
Constraints:
range: 5-5
 .1.3.6.1.4.1.2011.6.3.10.5.1.6
hwCliUserLogoutTime
Permitted latest time of login.
The user can log in to the system at the time from the permitted earliest time to
the permitted latest time. In other periods, the user cannot log in to the system.
OctetStringr/w
Constraints:
range: 5-5
 .1.3.6.1.4.1.2011.6.3.10.5.1.7
hwCliUserProfileRowStatus
This object is used to operate the user profile.
The system profile cannot be modified or deleted.
When a user is bound with the user profile, the user profile cannot be modified or deleted.
The parameter settings of t…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.6.3.10.5.1.10

hwSNMPUserTable

table
.1.3.6.1.4.1.2011.6.3.10.7 · 1 row entry · 5 columns
Open in standard view 
NMS user management table, which supports the login and logout of the NMS user 
and the function of querying the information about the online NMS user.
The index of this table is hwSNMPUserID. The index value is the user ID.
hwSNMPUserEntry entry .1.3.6.1.4.1.2011.6.3.10.7.1
NMS user management table, which supports the login and logout of the NMS user
and the function of querying the information about the online NMS user.
The index of this entry is hwSNMPUserID. The index value is the use…
Indexes
hwSNMPUserID
Column Syntax OID
hwSNMPUserID
SNMP user ID(1..8) and index object.
The value that the device returns to the NMS, which uniquely identifies a user.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.2011.6.3.10.7.1.1
hwSNMPUserName
Name of the SNMP user.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.2011.6.3.10.7.1.2
hwSNMPUserAdminStatus
SNMP user admin status(1:logon,2:logoff).
Visual local craft terminal (LCT).
Options:
1. logon(1) -indicates that the user can be set to go online.
2. logoff(2) -indicates that the user can be set to go offline. …
Enumerationr/w
Enumerated Values:
1logon
2logoff
 .1.3.6.1.4.1.2011.6.3.10.7.1.3
hwSNMPUserType
SNMP user type(1:lct).
Options:
1.lct(1) -indicates that visual LCT, which is an NMS user type.
Enumerationr/w
Enumerated Values:
1lct
 .1.3.6.1.4.1.2011.6.3.10.7.1.4
hwSNMPUserIP
IP address that SNMP user use.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.3.10.7.1.5

hwModemCallbackMngtTable

table
.1.3.6.1.4.1.2011.6.3.10.11.2 · 1 row entry · 3 columns
Open in standard view 
The callback security configuration table.
This table is used to manage the callback telephone numbers and passwords.
The index of this table is hwModemCallbackIndex.
hwModemCallbackMngtEntry entry .1.3.6.1.4.1.2011.6.3.10.11.2.1
The callback security configuration table.
This table is used to manage the callback telephone numbers and passwords.
The index of this entry is hwModemCallbackIndex.
Indexes
hwModemTelNumber
Column Syntax OID
hwModemTelNumber
Telephone number
OctetString
Constraints:
range: 1-20
 .1.3.6.1.4.1.2011.6.3.10.11.2.1.1
hwModemPassword
User password. The password must be cipher encrypted by MD5,
it consists of 16 characters.
OctetStringr/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.2011.6.3.10.11.2.1.2
hwModemCallbackRowStatus
Operation user configration of the modem callback function, the user configration
can be added and deleted.
The user telephone number and password must be bound when the user is added.
The exist telephone number or pa…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.6.3.10.11.2.1.3

hwFirewallSwitchTable

table
.1.3.6.1.4.1.2011.6.3.12.1 · 1 row entry · 2 columns
Open in standard view 
Firewall switch table, which supports the functions of querying, 
enabling and disabling the protocol-type firewall switch.
The index of this table is hwFirewallProtocolType.
hwFirewallSwitchEntry entry .1.3.6.1.4.1.2011.6.3.12.1.1
Firewall switch table, which supports the functions of querying,
enabling and disabling the protocol-type firewall switch.
The index of this entry is hwFirewallProtocolType.
Indexes
hwFirewallProtocolType
Column Syntax OID
hwFirewallProtocolType
Index object, index of the hwFirewallSwitchTable object.
Options:
1.telnet(1) -indicates that the firewall protocols is telnet.
2.ssh(2) -indicates that the firewall protocols is ssh.
3.snmp(3) -indicates that …
Enumeration
Enumerated Values:
1telnet
2ssh
3snmp
 .1.3.6.1.4.1.2011.6.3.12.1.1.1
hwFirewallSwitch
Firewall switch.
Options:
1. enable(1) -indicates that when the device needs to control the protocol used to access the device,
this command can be executed to enable(1) the firewall switch of the protoc…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.3.12.1.1.2

hwAccessIpTable

table
.1.3.6.1.4.1.2011.6.3.12.2 · 1 row entry · 3 columns
Open in standard view 
Access IP table, which supports the functions of querying, adding 
and deleting the access IP table of a specified protocol.
The access IP table is used to configure the address segments 
of the accessible devices under the specified protocol. 
This can prevent the invalid users from logging in to the device, that is, 
the operators whose IP addresses are not in the address segments 
and access protocols do not meet the requirements cannot access the device.
The indexes of this table are hwFirewallProtocolType and hwAccessIpStartAddr. 
For the hwFirewallProtocolType object, refer to hwFirewallSwitchTable.
hwAccessIpTable is used for configuring a list of accessible IP addresses. 
The IP address list takes effect only when the protocol corresponding to 
hwFirewallSwitchTable is enabled.
hwAccessIpEntry entry .1.3.6.1.4.1.2011.6.3.12.2.1
Access IP table, which supports the functions of querying, adding
and deleting the access IP table of a specified protocol.
The access IP table is used to configure the address segments
of the accessible devices under…
Indexes
hwFirewallProtocolType hwAccessIpStartAddr
Column Syntax OID
hwAccessIpStartAddr
Start IP address of one record in access Ip table.
The IP address in the new record of the table must be valid,
that is, the IP address is not a class 0 address or class D address.
The record in which the start address …
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.3.12.2.1.1
hwAccessIpEndAddr
End IP address of one record in access Ip table.
The new IP address must be valid, that is,
the IP address is not a class 0 address or class D address.
The record in which the end address is smaller than the start
add…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.3.12.2.1.2
hwAccessIpRowStatus
Operation status of row.
The specified protocol type and the start and end addresses in
the start address permitting table can be modified.
createAndGo(4) is supplied to create a new instance of a conceptual row.
d…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.6.3.12.2.1.3

hwRefuseIpTable

table
.1.3.6.1.4.1.2011.6.3.12.3 · 1 row entry · 3 columns
Open in standard view 
Refuse IP table. The table is used to configure the address segment 
(under a specified protocol) with which the user cannot access the device. 
This can prevent the invalid users from logging in to the device.
After address segment is configured in the table, the operators 
with the IP addresses in the address segment cannot access the device.
The indexes of this table are hwFirewallProtocolType and hwRefuseIpStartAddr.
For the hwFirewallProtocolType object, refer to hwFirewallSwitchTable.
hwRefuseIpTable is used for configuring a list of prohibited IP addresses. 
The IP address list takes effect only when the protocol corresponding to 
hwFirewallSwitchTable is enabled.
hwRefuseIpEntry entry .1.3.6.1.4.1.2011.6.3.12.3.1
Refuse IP table. The table is used to configure the address segment
(under a specified protocol) with which the user cannot access the device.
This can prevent the invalid users from logging in to the device.
After ad…
Indexes
hwFirewallProtocolType hwRefuseIpStartAddr
Column Syntax OID
hwRefuseIpStartAddr
Start IP address of one record in refuse Ip table.
The IP address in the new record of the table must be valid,
that is, the IP address is neither a class 0 address nor class D address.
The record in which the start add…
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.3.12.3.1.1
hwRefuseIpEndAddr
End IP address of one record in refuse Ip table.
The IP address in the new record of the table must be valid, that is,
the IP address is not a class 0 address or class D address.
The record in which the end address is …
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.3.12.3.1.2
hwRefuseIpRowStatus
Operation status of row.
The specified protocol type and the start and end addresses in the
start address rejecting table can be modified.
createAndGo(4) is supplied to create a new instance of a conceptual row.
dest…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.6.3.12.3.1.3

hwFirewallSwitchV6Table

table
.1.3.6.1.4.1.2011.6.3.12.4 · 1 row entry · 2 columns
Open in standard view 
IPv6 Firewall switch table, which supports the functions of querying, 
enabling and disabling the protocol-type firewall switch.
The index of this table is hwFirewallV6ProtocolType.
hwFirewallSwitchV6Entry entry .1.3.6.1.4.1.2011.6.3.12.4.1
IPv6 Firewall switch table, which supports the functions of querying,
enabling and disabling the protocol-type firewall switch.
The index of this entry is hwFirewallV6ProtocolType.
Indexes
hwFirewallV6ProtocolType
Column Syntax OID
hwFirewallV6ProtocolType
Index object, index of the hwFirewallSwitchV6Table object.
Options:
1.telnet(1) -indicates that the IPv6 firewall protocols is telnet.
2.ssh(2) -indicates that the IPv6 firewall protocols is ssh.
3.snmp(3) -ind…
Enumeration
Enumerated Values:
1telnet
2ssh
3snmp
 .1.3.6.1.4.1.2011.6.3.12.4.1.1
hwFirewallSwitchV6
Firewall switch.
Options:
1. enable(1) -indicates that when the device needs to control the protocol used to access the device,
this command can be executed to enable(1) the firewall switch of the protoc…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.3.12.4.1.2

hwAccessIpv6Table

table
.1.3.6.1.4.1.2011.6.3.12.5 · 1 row entry · 3 columns
Open in standard view 
Access IPv6 table, which supports the functions of querying, adding 
and deleting the access IPv6 table of a specified protocol.
The access IPv6 table is used to configure the address segments 
of the accessible devices under the specified protocol. 
This can prevent the invalid users from logging in to the device, that is, 
the operators whose IPv6 addresses are not in the address segments 
and access protocols do not meet the requirements cannot access the device.
The indexes of this table are hwFirewallV6ProtocolType and hwAccessIpv6StartAddr. 
For the hwFirewallV6ProtocolType object, refer to hwFirewallSwitchV6Table.
hwAccessIpv6Table is used for configuring a list of accessible IPv6 addresses. 
The IPv6 address list takes effect only when the protocol corresponding to 
hwFirewallSwitchV6Table is enabled.
hwAccessIpv6Entry entry .1.3.6.1.4.1.2011.6.3.12.5.1
Access IPv6 table, which supports the functions of querying, adding
and deleting the access IPv6 table of a specified protocol.
The access IPv6 table is used to configure the address segments
of the accessible devices…
Indexes
hwFirewallV6ProtocolType hwAccessIpv6StartAddr
Column Syntax OID
hwAccessIpv6StartAddr
Start IPv6 address of one record in access IPv6 table.
The IPv6 address in the new record of the table must be valid.
The record in which the start address is the same as the existing one
cannot be added to the table.
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.2011.6.3.12.5.1.1
hwAccessIpv6EndAddr
End IPv6 address of one record in access IPv6 table.
The new IPv6 address must be valid, that is.
The record in which the end address is smaller than the start
address cannot be added and each protocol supports a maxim…
IPV6-TCIpv6Addressr/w
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.2011.6.3.12.5.1.2
hwAccessIpv6RowStatus
Operation status of row.
The specified protocol type and the start and end addresses in
the start address permitting table can be modified.
createAndGo(4) is supplied to create a new instance of a conceptual row.
d…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.6.3.12.5.1.3

hwRefuseIpv6Table

table
.1.3.6.1.4.1.2011.6.3.12.6 · 1 row entry · 3 columns
Open in standard view 
Refuse IPv6 table. The table is used to configure the address segment 
(under a specified protocol) with which the user cannot access the device. 
This can prevent the invalid users from logging in to the device.
After address segment is configured in the table, the operators 
with the IPv6 addresses in the address segment cannot access the device.
The indexes of this table are hwFirewallV6ProtocolType and hwRefuseIpv6StartAddr.
For the hwFirewallV6ProtocolType object, refer to hwFirewallSwitchV6Table.
hwRefuseIpv6Table is used for configuring a list of prohibited IPv6 addresses. 
The IPv6 address list takes effect only when the protocol corresponding to 
hwFirewallSwitchV6Table is enabled.
hwRefuseIpv6Entry entry .1.3.6.1.4.1.2011.6.3.12.6.1
Refuse IPv6 table. The table is used to configure the address segment
(under a specified protocol) with which the user cannot access the device.
This can prevent the invalid users from logging in to the device.
After …
Indexes
hwFirewallV6ProtocolType hwRefuseIpv6StartAddr
Column Syntax OID
hwRefuseIpv6StartAddr
Start IPv6 address of one record in refuse IPv6 table.
The IPv6 address in the new record of the table must be valid.
The record in which the start address is the same as the existing
one cannot be added to the table.
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.2011.6.3.12.6.1.1
hwRefuseIpv6EndAddr
End IPv6 address of one record in refuse IPv6 table.
The IPv6 address in the new record of the table must be valid, that is.
The record in which the end address is smaller than the start address
cannot be added and eac…
IPV6-TCIpv6Addressr/w
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.2011.6.3.12.6.1.2
hwRefuseIpv6RowStatus
Operation status of row.
The specified protocol type and the start and end addresses in the
start address rejecting table can be modified.
createAndGo(4) is supplied to create a new instance of a conceptual row.
dest…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.6.3.12.6.1.3

hwSysManSourceInterfaceTable

table
.1.3.6.1.4.1.2011.6.3.19.1 · 1 row entry · 5 columns
Open in standard view 
Sysman source interface table.
The table is used to configure the source interfaces under the protocols 
such as SNMP trap, TFTP, FTP, SFTP, Telnet, Ping and Tracert.
The addresses of the Loopback, meth and VLANIF interfaces can be used as 
the source addresses from which the system sends packets.
The system uses the bound interface address as the source address to send 
the protocol packet. The index of this table is hwSysManProtocolType.
hwSysManSourceInterfaceEntry entry .1.3.6.1.4.1.2011.6.3.19.1.1
Sysman source interface table.
The table is used to configure the source interfaces under the protocols
such as SNMP trap, TFTP, FTP, SFTP, Telnet, Ping and Tracert.
The addresses of the Loopback, meth and VLANIF inter…
Indexes
hwSysManProtocolType
Column Syntax OID
hwSysManProtocolType
Application-layer packet type.
Options:
1. trap(1) -indicates the trap packet.
2. syslog(2) -indicates the syslog packet.
3. tftp(3) -indicates the tftp packet.
4. ftp(4) -indicates the ftp packet.
5. sftp(5)…
Enumeration
Enumerated Values:
1trap
2syslog
3tftp
4ftp
5sftp
6telnet
7ping
8tracert
9license
10stelnet
11ipdr
12tftpproxy
 .1.3.6.1.4.1.2011.6.3.19.1.1.1
hwSourceInterfaceType
Source interface type, which is used with the interface number to
determine the interface from which packets are sent.
Options:
1. auto(1) -indicates the function of automatically searching for
th…
Enumerationr/w
Enumerated Values:
1auto
2loopback
3meth
4vlanif
 .1.3.6.1.4.1.2011.6.3.19.1.1.2
hwSourceInterfaceNumber
Source interface number, which is the interface number under the source interface type object
and is used with the interface type to determine the interface from which packets are sent.
The hwSourceInterfaceNumber v…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.3.19.1.1.3
hwSourceInterfaceIPAddress
Source interface ip address, which is the ip address set by user directly for the the source interface type object.
Currently this node is only used for tftp-proxy,which means other protocol doesn't support this operati…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.3.19.1.1.4
hwSourceIPv6Address
Source interface ipv6 address, which is the ipv6 address set by user directly for the source interface type object.
Currently this node is used for tftp, ftp, sftp, telnet, stelnet, trap, syslog.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.6.3.19.1.1.5