HPNSATRAP-MIB
Imported Objects
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises |
Objects (43)
hp
|
.1.3.6.1.4.1.11 |
|
|
nm
|
.1.3.6.1.4.1.11.2 |
|
|
hpnsa
|
.1.3.6.1.4.1.11.2.23 |
|
|
hpnsaECC
|
.1.3.6.1.4.1.11.2.23.6 |
|
|
hpnsaRemoteAssist
|
.1.3.6.1.4.1.11.2.23.8 |
|
|
hpnr
|
.1.3.6.1.4.1.16 |
|
|
hpNetRAID
|
.1.3.6.1.4.1.16.1 |
|
|
hpNetRaidMib
|
.1.3.6.1.4.1.16.1.1 |
|
|
raidTraps
|
.1.3.6.1.4.1.16.1.1.200 |
|
rtAdapterNumber
mandatory
|
Integer32 | .1.3.6.1.4.1.16.1.1.200.1001 |
|
rtLogicalDriveNumber
mandatory
|
Integer32 | .1.3.6.1.4.1.16.1.1.200.1002 |
|
rtChannelNumber
mandatory
|
Integer32 | .1.3.6.1.4.1.16.1.1.200.1003 |
|
rtTargetID
mandatory
|
Integer32 | .1.3.6.1.4.1.16.1.1.200.1004 |
|
rtOldDriveState
mandatory
|
.1.3.6.1.4.1.16.1.1.200.1005 |
|
|
rtNewDriveState
mandatory
|
.1.3.6.1.4.1.16.1.1.200.1006 |
|
|
rtSenseKey
mandatory
|
Integer32 | .1.3.6.1.4.1.16.1.1.200.1007 |
|
rtASC
mandatory
|
Integer32 | .1.3.6.1.4.1.16.1.1.200.1008 |
|
rtASCQ
mandatory
|
Integer32 | .1.3.6.1.4.1.16.1.1.200.1009 |
|
rtDriveVendor
mandatory
|
.1.3.6.1.4.1.16.1.1.200.1010 |
|
|
adaptec
|
.1.3.6.1.4.1.795 |
|
|
storagemanagement
|
.1.3.6.1.4.1.795.2 |
|
|
cyclone
|
.1.3.6.1.4.1.795.2.5 |
|
|
cycTraps
|
.1.3.6.1.4.1.795.2.5.9000 |
|
|
cycManagerID
mandatory
|
.1.3.6.1.4.1.795.2.5.9000.9001 |
|
|
cycHostAdapterID
mandatory
|
OctetString | .1.3.6.1.4.1.795.2.5.9000.9002 |
|
cycHostAdapterNumber
mandatory
|
Integer32 | .1.3.6.1.4.1.795.2.5.9000.9003 |
|
cycVendor
mandatory
|
OctetString | .1.3.6.1.4.1.795.2.5.9000.9004 |
|
cycProduct
mandatory
|
OctetString | .1.3.6.1.4.1.795.2.5.9000.9005 |
|
cycControllerModel
mandatory
|
OctetString | .1.3.6.1.4.1.795.2.5.9000.9006 |
|
cycBusNumber
mandatory
|
Integer32 | .1.3.6.1.4.1.795.2.5.9000.9007 |
|
cycChannelNumber
mandatory
|
Integer32 | .1.3.6.1.4.1.795.2.5.9000.9008 |
|
cycScsiTargetID
mandatory
|
Integer32 | .1.3.6.1.4.1.795.2.5.9000.9009 |
|
cycLun
mandatory
|
Integer32 | .1.3.6.1.4.1.795.2.5.9000.9010 |
|
cycArrayName
mandatory
|
OctetString | .1.3.6.1.4.1.795.2.5.9000.9011 |
|
cycMisCompares
mandatory
|
Integer32 | .1.3.6.1.4.1.795.2.5.9000.9012 |
|
cycDriver
mandatory
|
Integer32 | .1.3.6.1.4.1.795.2.5.9000.9013 |
|
cycManager
mandatory
|
Integer32 | .1.3.6.1.4.1.795.2.5.9000.9014 |
|
cycOldArrayName
mandatory
|
OctetString | .1.3.6.1.4.1.795.2.5.9000.9015 |
|
cycNewArrayName
mandatory
|
OctetString | .1.3.6.1.4.1.795.2.5.9000.9016 |
|
cycPriority
mandatory
|
Integer32 | .1.3.6.1.4.1.795.2.5.9000.9017 |
|
cycSenseInfo
mandatory
|
Integer32 | .1.3.6.1.4.1.795.2.5.9000.9018 |
|
adaptecNm
|
.1.3.6.1.4.1.795.4 |
|
|
adaptecNmScsiStatus
|
.1.3.6.1.4.1.795.4.1 |
Notifications / Traps (169)
| Name | OID | Description |
|---|---|---|
hpnsaTempMonitorError
|
.1.3.6.1.4.1.11.2.23.0.12288 |
Server temperature monitor cannot read temperature data. |
|
hpnsaTempTrapWarning
|
.1.3.6.1.4.1.11.2.23.0.12289 |
Server temperature has exceeded the warning temperature threshold. |
|
hpnsaTempTrapEmergency
|
.1.3.6.1.4.1.11.2.23.0.12290 |
Server temperature has exceeded the emergency temperature threshold. |
|
hpnsaNicReceiveErrors
|
.1.3.6.1.4.1.11.2.23.0.16385 |
The total number of packets with receive errors has exceeded the threshold. |
|
hpnsaNicTransmitErrors
|
.1.3.6.1.4.1.11.2.23.0.16386 |
The total number of packets with transmit errors has exceeded the threshold. |
|
hpnsaNicAdapterReset
|
.1.3.6.1.4.1.11.2.23.0.16387 |
The total number of LAN Adapter reset errors has exceeded the threshold. |
|
hpnsaNicAlignmentErrors
|
.1.3.6.1.4.1.11.2.23.0.16388 |
The total number of alignment and CRC errors has exceeded the threshold. |
|
hpnsaNicGiantFrameErrors
|
.1.3.6.1.4.1.11.2.23.0.16389 |
The total number of giant frame packets has exceeded the threshold. |
|
hpnsaNicHardwareMismatch
|
.1.3.6.1.4.1.11.2.23.0.16390 |
The total number of packets with length less than the required minimum length has exceeded the threshold. |
|
hpnsaNicLateCollision
|
.1.3.6.1.4.1.11.2.23.0.16391 |
The total number of late collision errors has exceeded the threshold (the network is too large). |
|
hpnsaNicExcessiveCollision
|
.1.3.6.1.4.1.11.2.23.0.16392 |
The total number of colliding packets has exceeded the threshold (the network is too busy). |
|
hpnsaNicCarrierSenseError
|
.1.3.6.1.4.1.11.2.23.0.16393 |
The total number of carrier sense errors has exceeded the threshold. |
|
hpnsaNicDeferralError
|
.1.3.6.1.4.1.11.2.23.0.16394 |
The total number of adapter deferrals has exceeded the threshold (the network is forever busy). |
|
hpnsaNicNoECBError
|
.1.3.6.1.4.1.11.2.23.0.16395 |
The total number of No ECB errors (LAN adapter is out of receive buffers) errors has exceeded the threshold. |
|
hpnsaNicReceiveOverflow
|
.1.3.6.1.4.1.11.2.23.0.16396 |
The total number of Receive Overflow errors has exceeded the threshold. |
|
hpnsaNicUtilCount
|
.1.3.6.1.4.1.11.2.23.0.16397 |
LAN adapter utilization count has exceeded the threshold. |
|
hpnsaNicAdapterMismatch
|
.1.3.6.1.4.1.11.2.23.0.16398 |
The LAN adapter which the alarms were configured for, has been replaced by another type of LAN adapter. |
|
hpnsaNicTxFIFOUnderrun
|
.1.3.6.1.4.1.11.2.23.0.16399 |
There possibly is a dataflow problem with your HP LAN adapter. |
|
hpnsaNicTxTimeOut
|
.1.3.6.1.4.1.11.2.23.0.16400 |
The HP LAN adapter driver did not receive a transmit complete interrupt. |
|
hpnsaNicRxFIFOOverrun
|
.1.3.6.1.4.1.11.2.23.0.16401 |
There possibly is a dataflow problem with your HP LAN adapter. |
|
hpnsaNicRxFalseInterrupts
|
.1.3.6.1.4.1.11.2.23.0.16402 |
There is a dataflow problem with your HP LAN adapter - receive interrupts are being generated, but no receive packets are being present. |
|
hpnsaNicPagingError
|
.1.3.6.1.4.1.11.2.23.0.16403 |
There possibly is a problem with your HP LAN adapter - it generates too many buffer pointer errors. |
|
hpnsaNicTimedOutDMA
|
.1.3.6.1.4.1.11.2.23.0.16404 |
There possibly is a problem with your HP LAN adapter - DMA timed out while transmitting or receiving a packet. |
|
hpnsaNicTxNoResources
|
.1.3.6.1.4.1.11.2.23.0.16405 |
The HP LAN adapter is transmitting faster than the media can handle. |
|
hpnsaNicTxExcessiveFrags
|
.1.3.6.1.4.1.11.2.23.0.16406 |
The number of buffer fragments has exceeded the maximum number allowed by the network protocol in your HP LAN adapter. |
|
hpnsaNicRxLow
|
.1.3.6.1.4.1.11.2.23.0.16407 |
The total number of errors due to requests of an ECB being denied has exceeded the threshold. |
|
hpnsaNicRxEmpty
|
.1.3.6.1.4.1.11.2.23.0.16408 |
There possibly is a problem with your HP LAN adapter running in bus master mode. |
|
hpnsaParityError
|
.1.3.6.1.4.1.11.2.23.0.20528 |
Parity error has been detected in parity memory |
|
hpnsaBusTimeoutError
|
.1.3.6.1.4.1.11.2.23.0.20544 |
One of the bus masters caused a bus timeout |
|
hpnsaIOChannelCheck
|
.1.3.6.1.4.1.11.2.23.0.20560 |
I/0 channel check activated by device in EISA slot caused an error |
|
hpnsaSoftwareNMI
|
.1.3.6.1.4.1.11.2.23.0.20576 |
Software NMI has been generated |
|
hpnsaPostMemoryResize
|
.1.3.6.1.4.1.11.2.23.0.20592 |
Memory size has been adjusted during the Power-On-Self-Test during the last boot |
|
hpnsaPciParityError
|
.1.3.6.1.4.1.11.2.23.0.20624 |
Parity error has occurred on a transfer to/from a device on one of the PCI buses |
|
hpnsaPciSystemError
|
.1.3.6.1.4.1.11.2.23.0.20640 |
System error has occurred in the PCI subsystem |
|
hpnsaCPUFailure
|
.1.3.6.1.4.1.11.2.23.0.20656 |
One or more CPUs have failed. Detected by BIOS during POST |
|
hpnsaFailsafeTimeout
|
.1.3.6.1.4.1.11.2.23.0.20672 |
Timeout of failsafe timer has occurred |
|
hpnsaErrorLoggingDisabled
|
.1.3.6.1.4.1.11.2.23.0.20704 |
Error logging for a specific error has been disabled due to too many errors of that kind in a short time period |
|
hpnsaSystemWarning
|
.1.3.6.1.4.1.11.2.23.0.20736 |
An event of warning severity has occurred in the system. For example, chassis door has been opened |
|
hpnsaSystemCritical
|
.1.3.6.1.4.1.11.2.23.0.20737 |
An event of critical severity has occurred in the system. For example, both system fans have failed |
|
hpnsaVoltEmergency
|
.1.3.6.1.4.1.11.2.23.0.20738 |
Fatal voltage threshold on one of the system voltage channels has been exceeded. Voltage channels are +12V, +5V, -12V, +3.3V to PCI, +3.3V to CPU |
|
hpnsaVoltWarning
|
.1.3.6.1.4.1.11.2.23.0.20739 |
Warning voltage threshold on one of the system voltage channels has been exceeded. Voltage channels are +12V, +5V, -12V, +3.3V to PCI, +3.3V to CPU |
|
hpnsaASRServerRestart
|
.1.3.6.1.4.1.11.2.23.0.20752 |
Server has been restarted after the system watchdog timer has timed out due to NOS being hung |
|
hpnsaSystemReconfig
|
.1.3.6.1.4.1.11.2.23.0.20800 |
EISA Configuration Utility has altered system configuration |
|
hpnsaHotSwapTempMonitorError
|
.1.3.6.1.4.1.11.2.23.0.24449 |
Hot Swap Cage: Temperature monitor error occurred |
|
hpnsaHotSwapTempWarning
|
.1.3.6.1.4.1.11.2.23.0.24451 |
Hot Swap Cage: Warning temperature exceeded |
|
hpnsaHotSwapTempEmergency
|
.1.3.6.1.4.1.11.2.23.0.24452 |
Hot Swap Cage: Emergency temperature exceeded! |
|
hpnsaHotSwapPowerFailure
|
.1.3.6.1.4.1.11.2.23.0.24453 |
Power connection failure in one of the devices in the hot swap cage |
|
hpnsaHotSwapDeviceRemoved
|
.1.3.6.1.4.1.11.2.23.0.24454 |
A device has been removed from the hot swap cage |
|
hpnsaHotSwapDeviceInserted
|
.1.3.6.1.4.1.11.2.23.0.24455 |
A device has been inserted into the hot swap cage |
|
hpnsaStorageCapWarning
|
.1.3.6.1.4.1.11.2.23.0.4096 |
Volume Storage Capacity has exceeded the warning threshold level. |
|
hpnsaStorageCapMinor
|
.1.3.6.1.4.1.11.2.23.0.4097 |
Volume Storage Capacity has exceeded the minor threshold level. |
|
hpnsaStorageCapMajor
|
.1.3.6.1.4.1.11.2.23.0.4098 |
Volume Storage Capacity has exceeded the major threshold level. |
|
hpnsaPostError
|
.1.3.6.1.4.1.11.2.23.0.4356 |
Post Error has occurred. |
|
hpnsaDiskSysDefects
|
.1.3.6.1.4.1.11.2.23.0.8210 |
The Defect List Threshold has been exceeded. |
|
hpnsaDaCacheError
|
.1.3.6.1.4.1.11.2.23.0.8609 |
HPDA Controller: Cache Error |
|
hpnsaDaLogicalDriveTrap
|
.1.3.6.1.4.1.11.2.23.0.8625 |
HPDA Logical Drive: Critical |
|
hpnsaDaLogicalDriveNotAvailable
|
.1.3.6.1.4.1.11.2.23.0.8626 |
HPDA Logical Drive Not Available |
|
hpnsaDaHotSpareFailure
|
.1.3.6.1.4.1.11.2.23.0.8641 |
HPDA Hot Spare:Failed |
|
hpnsaDaHotSpareSuccess
|
.1.3.6.1.4.1.11.2.23.0.8642 |
HPDA Hot Spare Succeeded |
|
hpnsaDaHardDiskFailure
|
.1.3.6.1.4.1.11.2.23.0.8657 |
HPDA Hard Disk Failed |
|
hpnsaDaParityThresholdTrap
|
.1.3.6.1.4.1.11.2.23.0.8673 |
HPDA Threshold Exceeded: Parity |
|
hpnsaDaSoftErrorThresholdTrap
|
.1.3.6.1.4.1.11.2.23.0.8674 |
HPDA Threshold Exceeded: Soft Errors |
|
hpnsaDaHardwareThresholdTrap
|
.1.3.6.1.4.1.11.2.23.0.8675 |
HPDA Threshold Exceeded: Hardware Errors |
|
hpnsaDaMiscThresholdTrap
|
.1.3.6.1.4.1.11.2.23.0.8676 |
HPDA Threshold Exceeded: Miscellaneous Errors |
|
hpnsaDaControllerTrap
|
.1.3.6.1.4.1.11.2.23.0.8677 |
HPDA Controller: NVRAM Age |
|
hpnsaRPSAbnormalCondition
|
.1.3.6.1.4.1.11.2.23.0.9101 |
The Redundant Power Supply module is not operating properly, but there is no power supply module hardware failure. |
|
hpnsaRPSACPowerSourceFailure
|
.1.3.6.1.4.1.11.2.23.0.9103 |
Indicates a failure with the AC power source that is connected to one of the redundant power supply units. |
|
hpnsaRPSPsuFailureDetected
|
.1.3.6.1.4.1.11.2.23.0.9105 |
Indicates that one of the redundant power supply modules is not in normal operating condition. |
|
hpnsaRPSDCShutdown
|
.1.3.6.1.4.1.11.2.23.0.9106 |
Indicates that one of the redundant power supply modules is in over temperature protection mode. |
|
hpnsaRPSPsuRemoved
|
.1.3.6.1.4.1.11.2.23.0.9107 |
Indicates that one of the redundant power supply modules has been physically removed from the HP NetServer Power Supply Subsystem. |
|
hpnsaRPSPsuInserted
|
.1.3.6.1.4.1.11.2.23.0.9108 |
Indicates that one of the redundant power supply modules has been physically inserted into the HP NetServer Power Supply Subsystem. |
|
hpnsaRPSPowerRestored
|
.1.3.6.1.4.1.11.2.23.0.9109 |
Indicates that one of the redundant power supply modules in the HP NetServer has recovered from an over temperature protection mode. |
|
hpnsaRPSWarningExceeded
|
.1.3.6.1.4.1.11.2.23.0.9110 |
Indicates that one of the redundant power supply modules in the HP NetServer has exceeded the warning temperature level. |
|
hpnsaRPSEmergencyExceeded
|
.1.3.6.1.4.1.11.2.23.0.9111 |
Indicates that one of the redundant power supply modules in the HP NetServer has exceeded the emergency temperature level. |
|
hpnsaEccErrorCorrected
|
.1.3.6.1.4.1.11.2.23.6.0.4353 |
An ECC single-bit error has been corrected in one of the memory modules |
|
hpnsaEccSBEOverflow
|
.1.3.6.1.4.1.11.2.23.6.0.4354 |
Error logging for ECC single-bit errors has been disabled due to too many SBE's detected in a short time period |
|
hpnsaEccMemoryResize
|
.1.3.6.1.4.1.11.2.23.6.0.4355 |
ECC Memory size has been adjusted during the Power-On-Self-Test during the last boot due to a failed memory module |
|
hpnsaEccMultiBitError
|
.1.3.6.1.4.1.11.2.23.6.0.4357 |
An ECC double-bit error has occurred in one of the memory modules |
|
hpnsaEccMultiBitErrorOverflow
|
.1.3.6.1.4.1.11.2.23.6.0.4358 |
Error logging for ECC multiple-bit errors has been disabled due to too many MBE's detected in a short time period |
|
hpnsaRAVoltServerPowerFailure
|
.1.3.6.1.4.1.11.2.23.8.0.109 |
The server has lost the power completely. |
|
hpnsaRAVoltMinus12VUpper
|
.1.3.6.1.4.1.11.2.23.8.0.111 |
Voltage measured in the server has gone outside of -12V Upper Threshold. |
|
hpnsaRAVoltPlus3VUpper
|
.1.3.6.1.4.1.11.2.23.8.0.113 |
Voltage measured in the server has gone outside of +3.3V Upper Threshold. |
|
hpnsaRAVoltPlus5VUpper
|
.1.3.6.1.4.1.11.2.23.8.0.114 |
Voltage measured in the server has gone outside of +5V Upper Threshold. |
|
hpnsaRAVoltPlus12VUpper
|
.1.3.6.1.4.1.11.2.23.8.0.115 |
Voltage measured in the server has gone outside of +12V Upper Threshold. |
|
hpnsaRAVoltMinus12VLower
|
.1.3.6.1.4.1.11.2.23.8.0.121 |
Voltage measured in the server has gone outside of -12V Lower Threshold. |
|
hpnsaRAVoltBatteryLower
|
.1.3.6.1.4.1.11.2.23.8.0.122 |
The HP Remote Assistant Card's battery charging circuit is bad. |
|
hpnsaRAVoltPlus3VLower
|
.1.3.6.1.4.1.11.2.23.8.0.123 |
Voltage measured in the server has gone outside of +3.3V Lower Threshold. |
|
hpnsaRAVoltPlus5VLower
|
.1.3.6.1.4.1.11.2.23.8.0.124 |
Voltage measured in the server has gone outside of +5V Lower Threshold. |
|
hpnsaRAVoltPlus12VLower
|
.1.3.6.1.4.1.11.2.23.8.0.125 |
Voltage measured in the server has gone outside of +12V Lower Threshold. |
|
hpnsaRATempWarning
|
.1.3.6.1.4.1.11.2.23.8.0.211 |
The server temperature measured on the HP Remote Assistant Card has exceeded the configured warning threshold. |
|
hpnsaRATempShutdown
|
.1.3.6.1.4.1.11.2.23.8.0.221 |
The server temperature measured on the HP Remote Assistant Card has exceeded the configured threshold and the server has been automatically shut down. |
|
hpnsaRATempCritical
|
.1.3.6.1.4.1.11.2.23.8.0.231 |
The server temperature measured on the HP Remote Assistant Card has exceeded the configured Graceful Shutdown threshold value by 5 degrees C and the server has been automatically shut down. |
|
hpnsaRASuccessfulLogin
|
.1.3.6.1.4.1.11.2.23.8.0.401 |
An administrator has logged in to the HP Remote Assistant Card. |
|
hpnsaRAIllegalLogin
|
.1.3.6.1.4.1.11.2.23.8.0.402 |
An unauthorized user has made 3 or more unsuccessful attempts to log in to the HP Remote Assistant Card within a 5-minute period of time. |
|
hpnsaRALowBatteryCharge
|
.1.3.6.1.4.1.11.2.23.8.0.403 |
The HP Remote Assistant Card's battery charging circuit is bad. |
|
hpnsaRABoardShutDown
|
.1.3.6.1.4.1.11.2.23.8.0.404 |
The HP Remote Assistant Card has been shut down. |
|
hpnsaRAAdminstratorLogout
|
.1.3.6.1.4.1.11.2.23.8.0.405 |
An administrator disconnected from the HP Remote Assistant board. |
|
hpnsaRAAdministratorAutologout
|
.1.3.6.1.4.1.11.2.23.8.0.406 |
An administrator has been automatically disconnected from the HP Remote Assistant board. The administrator was inactive for more than five minutes. |
|
hpnsaRAAdministratorConnectionLost
|
.1.3.6.1.4.1.11.2.23.8.0.407 |
An administrator has been prematurely disconnected from the Remote Assistant board. |
|
hpnsaRAAdministratorDialbackFailed
|
.1.3.6.1.4.1.11.2.23.8.0.408 |
An administrator failed to connect to the HP Remote Assistant board on a dialback |
|
hpnsaRAASRHangNOS
|
.1.3.6.1.4.1.11.2.23.8.0.501 |
ASR has stopped notifying the HP Remote Assistant Card that the system is running correctly (the server probably hung or crashed). |
|
hpnsaRAASRServerRestart
|
.1.3.6.1.4.1.11.2.23.8.0.502 |
The HP Remote Assistant card has restarted the server due to the NOS being hung. |
|
hpnsaRAASRTimerEnabled
|
.1.3.6.1.4.1.11.2.23.8.0.503 |
The Automatic Server Restart software has been enabled by the Remote Assistant ASR timer. |
|
hpnsaRAASRTimerDisabled
|
.1.3.6.1.4.1.11.2.23.8.0.504 |
The HP Remote Assistant Automatic Server Restart timer has been disabled. |
|
hpnsaRARemoteInitiatedCtrlAltDel
|
.1.3.6.1.4.1.11.2.23.8.0.601 |
An administrator has executed a remote <Ctrl-Alt-Del> on the server via the HP Remote Assistant Card. |
|
hpnsaRARemoteInitiatedReset
|
.1.3.6.1.4.1.11.2.23.8.0.602 |
An administrator has executed a remote power cycle on the server via the HP Remote Assistant Card. |
|
hpnsaRARemoteInitiatedPowerDown
|
.1.3.6.1.4.1.11.2.23.8.0.603 |
An administrator has executed a remote power down of the server via the HP Remote Assistant Card. |
|
hpnsaRAInitServerBIOS
|
.1.3.6.1.4.1.11.2.23.8.0.701 |
The server's BIOS has successfully initialized the HP Remote Assistant Card during the boot process. |
|
hpnsaRABusUtilization
|
.1.3.6.1.4.1.11.2.23.8.0.800 |
The 5-minute average EISA bus utilization has exceeded the configured threshold. |
|
hpnsaRATestNotification
|
.1.3.6.1.4.1.11.2.23.8.0.900 |
An administrator has executed Test Page from the HP Remote Assistant Configuration Utility. |
|
hpnsaRATAPNoConnect
|
.1.3.6.1.4.1.11.2.23.8.0.901 |
The HP Remote Assistant modem was unable to connect to the TAP paging service modem. |
|
hpnsaRATAPParam1Error
|
.1.3.6.1.4.1.11.2.23.8.0.902 |
HP Remote Assistant was unable to connect with the TAP paging service. |
|
hpnsaRATAPParam2Error
|
.1.3.6.1.4.1.11.2.23.8.0.903 |
HP Remote Assistant was unable to log on to the TAP paging service. |
|
hpnsaRATAPParam3Error
|
.1.3.6.1.4.1.11.2.23.8.0.904 |
The HP Remote Assistant pager message was rejected by the TAP paging service. |
|
rtConfigUpdated
|
.1.3.6.1.4.1.16.1.1.200.0.9001 |
Adapter-%d: A New Configuration has been written. |
|
rtPhysicalDriveStateChange
|
.1.3.6.1.4.1.16.1.1.200.0.9002 |
Adapter-%d, Channel-%d, Target-%d: Drive State Changed from %s to %s. |
|
rtLogicalDriveStateChange
|
.1.3.6.1.4.1.16.1.1.200.0.9003 |
Adapter-%d, Logical Drive-%d: State Changed from %s to %s. |
|
rtInitializeStarted
|
.1.3.6.1.4.1.16.1.1.200.0.9004 |
Adapter-%d, Logical Drive-%d: Initialization Started. |
|
rtInitializeCompleted
|
.1.3.6.1.4.1.16.1.1.200.0.9005 |
Adapter-%d, Logical Drive-%d: Initialization Completed Successfully. |
|
rtInitializeAborted
|
.1.3.6.1.4.1.16.1.1.200.0.9006 |
Adapter-%d, Logical Drive-%d: Initialization Aborted by User. |
|
rtInitializeFailed
|
.1.3.6.1.4.1.16.1.1.200.0.9007 |
Adapter-%d, Logical Drive-%d: Initialization Failed. |
|
rtCheckConsistencyStarted
|
.1.3.6.1.4.1.16.1.1.200.0.9008 |
Adapter-%d, Logical Drive-%d: Check Consistency Started. |
|
rtCheckConsistencyCompleted
|
.1.3.6.1.4.1.16.1.1.200.0.9009 |
Adapter-%d, Logical Drive-%d: Check Consistency Completed. No Inconsistencies Found. |
|
rtCheckConsistencyAborted
|
.1.3.6.1.4.1.16.1.1.200.0.9010 |
Adapter-%d, Logical Drive-%d: Check Consistency Aborted by User. |
|
rtConsistencyCorrected
|
.1.3.6.1.4.1.16.1.1.200.0.9011 |
Adapter-%d, Logical Drive-%d: Check Consistency Operation Completed. Inconsistencies have been Cured. |
|
rtCheckConsistencyFailed
|
.1.3.6.1.4.1.16.1.1.200.0.9012 |
Adapter-%d, Logical Drive-%d: Check Consistency Failed. |
|
rtReconstructionStarted
|
.1.3.6.1.4.1.16.1.1.200.0.9013 |
Adapter-%d, Logical Drive-%d: Reconstruction Started. |
|
rtReconstructionCompleted
|
.1.3.6.1.4.1.16.1.1.200.0.9014 |
Adapter-%d, Logical Drive-%d: Reconstruction Completed Successfully. |
|
rtReconstructionFailed
|
.1.3.6.1.4.1.16.1.1.200.0.9015 |
Adapter-%d, Logical Drive-%d: Reconstruction Failed. |
|
rtPredictiveFailuresFalse
|
.1.3.6.1.4.1.16.1.1.200.0.9016 |
Adapter-%d, Channel-%d, Target-%d: Reported Failure Prediction Threshold Exceeded [FALSE]. Drive Identification String = %s Sense Key = 0x%x, ASC = 0x%x, ASCQ = 0x%x. |
|
rtPredictiveFailuresExceeded
|
.1.3.6.1.4.1.16.1.1.200.0.9017 |
Adapter-%d, Channel-%d, Target-%d: Reported Predictive Failure. Drive Identification String = %s Sense Key = 0x%x, ASC = 0x%x, ASCQ = 0x%x. |
|
rtCheckConditionStatus
|
.1.3.6.1.4.1.16.1.1.200.0.9018 |
Adapter-%d, Channel-%d, Target-%d: Command Completed with Sense_Key-0x%x ASC-0x%x ASCQ-0x%x. |
|
rtNewDriveInserted
|
.1.3.6.1.4.1.16.1.1.200.0.9019 |
Adapter-%d, Channel-%d, Target-%d: New Device Inserted. |
|
rtBatteryMissing
|
.1.3.6.1.4.1.16.1.1.200.0.9020 |
Adapter-%d: Battery Module is missing. |
|
rtBatteryVolatageLow
|
.1.3.6.1.4.1.16.1.1.200.0.9021 |
Adapter-%d: Battery Module Voltage is Low. |
|
rtBatteryTemperatureHigh
|
.1.3.6.1.4.1.16.1.1.200.0.9022 |
Adapter-%d: Battery Module Temperature Exceeded Danger Threshold. |
|
cycSNMPAgentIsUp
|
.1.3.6.1.4.1.795.2.5.0.101 |
SNMP Agent is up. |
|
cycSNMPAgentIsDown
|
.1.3.6.1.4.1.795.2.5.0.102 |
SNMP Agent is down. |
|
cycDuplicateHostAdapter
|
.1.3.6.1.4.1.795.2.5.0.107 |
Cyclone: duplicate hostadapter ID |
|
cycHostAdapterDiscovered
|
.1.3.6.1.4.1.795.2.5.0.108 |
The HostAdapter# %d with HostAdapter Id %s and Manager Id %s is discovered |
|
cycHostAdapterChanged
|
.1.3.6.1.4.1.795.2.5.0.109 |
The HostAdapter# %d has new HostAdapter Id %s and Manager Id %s |
|
cycHostAdapterFailed
|
.1.3.6.1.4.1.795.2.5.0.110 |
The HostAdapter# %d has Failed |
|
cycHostAdapterRecovered
|
.1.3.6.1.4.1.795.2.5.0.111 |
Host Adapter# %d recovered |
|
cycDeviceFailed
|
.1.3.6.1.4.1.795.2.5.0.112 |
The HostAdapter# %d , TargetID %d, Lun# %d has failed |
|
cycDeviceDiscovered
|
.1.3.6.1.4.1.795.2.5.0.113 |
The HostAdapter# %d , TargetID %d, Lun# %d of vendor %s product %s has discovered |
|
cycDeviceRecovered
|
.1.3.6.1.4.1.795.2.5.0.114 |
The HostAdapter# %d , TargetID %d, Lun# %d has recovered |
|
cycDeviceChanged
|
.1.3.6.1.4.1.795.2.5.0.115 |
The HostAdapter# %d , TargetID %d, Lun# %d has new Vendor %s and Product %s information |
|
cycPredictiveFailure
|
.1.3.6.1.4.1.795.2.5.0.116 |
The HostAdapter# %d , TargetID %d, Lun# %d has Predictive Failure Condition on vendor %s product %s with sense info MSB(sense code), next 8 bits(sense code Qual) next 8 bits (Add sense code Qual) LSB (0000) %d |
|
cycAspiDatabaseCleared
|
.1.3.6.1.4.1.795.2.5.0.117 |
The Aspi database is cleared and therefore all the previous information are not available |
|
cycAspiCrash
|
.1.3.6.1.4.1.795.2.5.0.118 |
The Aspi has crashed |
|
cycAspiNoMemory
|
.1.3.6.1.4.1.795.2.5.0.119 |
No memory left for Aspi Operations |
|
cycAspiFileWriteOpenError
|
.1.3.6.1.4.1.795.2.5.0.120 |
Unable to open Aspi file for writing, problem exists in server hard disk |
|
cycAspiFileWriteError
|
.1.3.6.1.4.1.795.2.5.0.121 |
Unable to open Aspi file , problem exists in server hard disk |
|
cycAspiNoDeviceFile
|
.1.3.6.1.4.1.795.2.5.0.122 |
Aspi device file doesnot exist |
|
cycAspiNoMemoryReading
|
.1.3.6.1.4.1.795.2.5.0.123 |
Aspi: Memory allocation is failing |
|
cycAspiFileReadError
|
.1.3.6.1.4.1.795.2.5.0.124 |
Aspi: unable to read the file server hard disk might have problems |
|
cycAspiBadFileMagic
|
.1.3.6.1.4.1.795.2.5.0.125 |
Aspi: database is corrupted |
|
hpnsaScsiStatusCorruptedDB
|
.1.3.6.1.4.1.795.4.1.0.8193 |
Device Database has been corrupted. |
|
hpnsaScsiStatusUnloadedNLM
|
.1.3.6.1.4.1.795.4.1.0.8194 |
SCSI Status agent was unloaded from a NetWare Server. |
|
hpnsaScsiStatusFailedHBA
|
.1.3.6.1.4.1.795.4.1.0.8196 |
One of the SCSI HBAs can no longer be detected by the SCSI Status agent. |
|
hpnsaScsiStatusRecoveredHBA
|
.1.3.6.1.4.1.795.4.1.0.8197 |
A Host Adapter which has failed, has become accessible again. |
|
hpnsaScsiStatusDiscoveredHBA
|
.1.3.6.1.4.1.795.4.1.0.8198 |
A new SCSI Host Bus Adapter has been discovered or device database has been cleared. |
|
hpnsaScsiStatusDeviceFailed
|
.1.3.6.1.4.1.795.4.1.0.8199 |
One of the SCSI devices installed on the server can no longer be detected by the SCSI Status agent. |
|
hpnsaScsiStatusDeviceRecovered
|
.1.3.6.1.4.1.795.4.1.0.8200 |
A SCSI device which has failed, has become accessible again. |
|
hpnsaScsiStatusDeviceDiscovered
|
.1.3.6.1.4.1.795.4.1.0.8201 |
A new SCSI device has been discovered. |
|
hpnsaScsiStatusChangedHBA
|
.1.3.6.1.4.1.795.4.1.0.8205 |
The SCSI Status agent detected that the Host Bus Adapter has been changed. |
|
hpnsaScsiStatusDeviceChanged
|
.1.3.6.1.4.1.795.4.1.0.8206 |
The SCSI Status agent detected that a SCSI device installed on the server has been changed. |
|
hpnsaScsiStatusTimeoutHBA
|
.1.3.6.1.4.1.795.4.1.0.8208 |
The SCSI Status agent sent a request to an HBA and the request never completed. |
|
hpnsaScsiStatusDeviceTimeout
|
.1.3.6.1.4.1.795.4.1.0.8209 |
The SCSI Status agent sent a request to a SCSI device and the request never completed. |