HPN-ICF-USERLOG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

hpnicfUserlogNatSlotCfgInfoTable

table

.1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.6 · 1 row entry · 5 columns

Open in standard view

A table of NAT LOG configuration information for the
specified slot.

hpnicfUserlogNatSlotCfgInfoEntry entry .1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.6.1

NAT LOG Configuration Information Entry for a slot.

Indexes

hpnicfUserlogNatCfgSlotNumber

Column	Syntax	OID
hpnicfUserlogNatCfgSlotNumber Slot number. Specify which slot is configured with NAT LOG.	Integer32 Constraints: `range: 0-15`	`.1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.6.1.1`
hpnicfUserlogNatEnable The NAT LOG feature Enable status. If 1, NAT LOG is enbled. If 0, NAT LOG is disabled.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.6.1.2`
hpnicfUserlogNatAclNumber Access-list number. The value 0 means no ACL is specified. Only when NAT LOG is enabled, can ACL be configured. Only NAT flow which match the ACL will be logged.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.6.1.3`
hpnicfUserlogNatHostAddress The IP address of NAT LOG server.	RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.6.1.4`
hpnicfUserlogNatUdpPort The UDP Port Number of NAT LOG UDP packet.	Integer32r/w Constraints: `range: 0-65535`	`.1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.6.1.5`

hpnicfUserlogNatSlotRunInfoTable

table

.1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.7 · 1 row entry · 6 columns

Open in standard view

A table of NAT LOG running information for the specified slot.

hpnicfUserlogNatSlotRunInfoEntry entry .1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.7.1

NAT LOG Running Information Entry for a slot.

Indexes

hpnicfUserlogNatRunSlotNumber

Column	Syntax	OID
hpnicfUserlogNatRunSlotNumber Slot number. Specify on which slot the NAT LOG statistics displayed.	Integer32 Constraints: `range: 0-15`	`.1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.7.1.1`
hpnicfUserlogNatTotalEntries The total number of NAT flow entries which are logged.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.7.1.2`
hpnicfUserlogNatTotalPackets The total number of NAT LOG UDP packets generated by the router.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.7.1.3`
hpnicfUserlogNatFailedEntries The total number of NAT flow entries failed in outputting.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.7.1.4`
hpnicfUserlogNatFailedPackets The total number of NAT LOG UDP packets failed in outputting.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.7.1.5`
hpnicfUserlogNatClearRunStat Clear the running statistics for NAT LOG. Write-only. If 1, the running statistics for NAT LOG is resetted. Other value is invalid.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.7.1.6`

hpnicfUserlogFlowSlotCfgInfoTable

table

.1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.6 · 1 row entry · 5 columns

Open in standard view

A table of BAS FLOW LOG configuration information for the
specified slot.

hpnicfUserlogFlowSlotCfgInfoEntry entry .1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.6.1

BAS FLOW LOG Configuration Information Entry for a slot.

Indexes

hpnicfUserlogFlowCfgSlotNumber

Column	Syntax	OID
hpnicfUserlogFlowCfgSlotNumber Slot number. Specify which slot is configured with BAS FLOW LOG.	Integer32 Constraints: `range: 0-15`	`.1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.6.1.1`
hpnicfUserlogFlowEnable The BAS FLOW LOG feature Enable status. If 1, BAS FLOW LOG is enbled. If 0, BAS FLOW LOG is disabled.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.6.1.2`
hpnicfUserlogFlowAclNumber Access-list number. The value 0 means no ACL is specified. Only when BAS FLOW LOG is enabled, can ACL be configured. Only BAS flow which match the ACL will be logged.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.6.1.3`
hpnicfUserlogFlowHostAddress The IP address of BAS FLOW LOG server.	RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.6.1.4`
hpnicfUserlogFlowUdpPort The UDP Port Number of BAS FLOW LOG UDP packet.	Integer32r/w Constraints: `range: 0-65535`	`.1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.6.1.5`

hpnicfUserlogFlowSlotRunInfoTable

table

.1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.7 · 1 row entry · 6 columns

Open in standard view

A table of BAS FLOW LOG running information for the specified slot.

hpnicfUserlogFlowSlotRunInfoEntry entry .1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.7.1

Running Information Entry for a slot.

Indexes

hpnicfUserlogFlowRunSlotNumber

Column	Syntax	OID
hpnicfUserlogFlowRunSlotNumber Slot number. Specify on which slot the BAS FLOW LOG statistics displayed.	Integer32 Constraints: `range: 0-15`	`.1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.7.1.1`
hpnicfUserlogFlowTotalEntries The total number of BAS FLOW Entries which are logged.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.7.1.2`
hpnicfUserlogFlowTotalPackets The total number of FLOW LOG UDP packet generated by the router.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.7.1.3`
hpnicfUserlogFlowFailedEntries The total number of BAS FLOW entries failed in outputting.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.7.1.4`
hpnicfUserlogFlowFailedPackets The total number of BAS FLOW LOG UDP packet failed in outputting.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.7.1.5`
hpnicfUserlogFlowClearRunStat Clear the running statistics for FLOW LOG. Write-only. If 1, the running statistics for FLOW LOG is resetted. Other value is invalid.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.7.1.6`

hpnicfUserlogAccessSlotCfgInfoTable

table

.1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.4 · 1 row entry · 4 columns

Open in standard view

A table of BAS ACCESS LOG configuration information for the specified slot.

hpnicfUserlogAccessSlotCfgInfoEntry entry .1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.4.1

BAS ACCESS LOG Configuration Information Entry for a slot.

Indexes

hpnicfUserlogAccessCfgSlotNumber

Column	Syntax	OID
hpnicfUserlogAccessCfgSlotNumber Slot number. Specify which slot is configured with BAS ACCESS LOG.	Integer32 Constraints: `range: 0-15`	`.1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.4.1.1`
hpnicfUserlogAccessEnable The BAS ACCESS LOG feature Enable status. If 1, BAS ACCESS LOG is enbled. If 0, BAS ACCESS LOG is disabled.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.4.1.2`
hpnicfUserlogAccessHostAddress The IP address of BAS ACCESS LOG server.	RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.4.1.3`
hpnicfUserlogAccessUdpPort The UDP Port Number of BAS ACCESS LOG UDP packet.	Integer32r/w Constraints: `range: 0-65535`	`.1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.4.1.4`

hpnicfUserlogAccessSlotRunInfoTable

table

.1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.5 · 1 row entry · 6 columns

Open in standard view

A table of BAS ACCESS LOG running information for the specified slot.

hpnicfUserlogAccessSlotRunInfoEntry entry .1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.5.1

Running Information Entry for a slot.

Indexes

hpnicfUserlogAccessRunSlotNumber

Column	Syntax	OID
hpnicfUserlogAccessRunSlotNumber Slot number. Specify on which slot the BAS ACCESS LOG statistics displayed.	Integer32 Constraints: `range: 0-15`	`.1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.5.1.1`
hpnicfUserlogAccessTotalEntries The total number of BAS ACCESS Records which are logged.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.5.1.2`
hpnicfUserlogAccessTotalPackets The total number of ACCESS LOG UDP packet generated by the router.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.5.1.3`
hpnicfUserlogAccessFailedEntries The total number of BAS ACCESS entries failed in outputting.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.5.1.4`
hpnicfUserlogAccessFailedPackets The total number of BAS ACCESS LOG UDP packet failed in outputting.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.5.1.5`
hpnicfUserlogAccessClearRunStat Clear the running statistics for ACCESS LOG. Write-only. If 1, the running statistics for ACCESS LOG is resetted. Other value is invalid.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.5.1.6`