HPN-ICF-RCR-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
5
Rows
5
Columns
31
.1.3.6.1.4.1.11.2.14.11.15.2.48.1.2 · 1 row entry · 4 columns
This table contains state information of each MR
which is controlled by RCR.
hpnicfRcrMRStateEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.48.1.2.1
Entry items
Indexes
hpnicfRcrMRName
Column Syntax OID
hpnicfRcrMRName
The name of MR which is controlled by RCR.
OctetString
Constraints:
range: 1-32
.1.3.6.1.4.1.11.2.14.11.15.2.48.1.2.1.1
hpnicfRcrMRState
The state of MR where identified on the controller
router-device(CR).
down: The MR has been enabled but has not connected
to the CR with TCP connection.
up: The MR has already successfully connected to
the CR …
Enumeration
Enumerated Values:
1down
2up
3controlled
.1.3.6.1.4.1.11.2.14.11.15.2.48.1.2.1.2
hpnicfRcrMRAuthType
The authentication type of communication packet between CR and MR.
Enumerationr/w
Enumerated Values:
1simple
2md5
.1.3.6.1.4.1.11.2.14.11.15.2.48.1.2.1.3
hpnicfRcrMRAuthPwd
The authentication password of communication packet between CR
and MR.
Reading this object always results in an OCTET STRING of length zero;
authentication may not be bypassed by reading the MIB object.
OctetStringr/w .1.3.6.1.4.1.11.2.14.11.15.2.48.1.2.1.4
.1.3.6.1.4.1.11.2.14.11.15.2.48.1.3 · 1 row entry · 5 columns
This table contains the external interface states of each MR
which is controlled by RCR.
hpnicfRcrMROutIfStateEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.48.1.3.1
Entry items
Indexes
hpnicfRcrMRName hpnicfRcrMROutIfName
Column Syntax OID
hpnicfRcrMROutIfName
The name of external interface on each MR.
OctetString
Constraints:
range: 1-48
.1.3.6.1.4.1.11.2.14.11.15.2.48.1.3.1.1
hpnicfRcrMROutIfState
The state of external interface on each MR.
Enumeration
Enumerated Values:
1down
2up
3notExist
.1.3.6.1.4.1.11.2.14.11.15.2.48.1.3.1.2
hpnicfRcrMROutIfMaxUsedBandRate
The max spendable bandwidth rate on external interface.
%Integer32r/w
Constraints:
range: 1-100
.1.3.6.1.4.1.11.2.14.11.15.2.48.1.3.1.3
hpnicfRcrMROutIfMinUsedBandRate
The min spendable bandwidth rate on external interface.
%Integer32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.11.2.14.11.15.2.48.1.3.1.4
hpnicfRcrMROutIfUsedBandRate
The used bandwidth rate on external interface.
%Integer32
Constraints:
range: 0-100
.1.3.6.1.4.1.11.2.14.11.15.2.48.1.3.1.5
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.2 · 1 row entry · 7 columns
This table contains objects to get statistic information
of interfaces on a device.
hpnicfRcrCRRcrPolicyEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.48.2.2.1
Entry items
Indexes
hpnicfRcrCRRcrPlyID
Column Syntax OID
hpnicfRcrCRRcrPlyID
The ID of RCR policy which the user has configured.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.2.1.1
hpnicfRcrCRRcrPlyMatchIPListName
The matched IP prefix list name of RCR policy which the user has
configured.
OctetStringr/w
Constraints:
range: 1-19
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.2.1.2
hpnicfRcrCRRcrPlyMatchStudyEnable
Whether the RCR policy which the user has configured is matched
for studying prefix mode.
Enumerationr/w
Enumerated Values:
1disable
2enable
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.2.1.3
hpnicfRcrCRRcrPlyMatchOperPlyName
The matched operation policy name of RCR policy which the user
has configured.
OctetStringr/w
Constraints:
range: 1-19
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.2.1.4
hpnicfRcrCRRcrAclNumber
The matched acl number of RCR operation policy which the user
has configured.
Integer32r/w
Constraints:
range: 3000-3999
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.2.1.5
hpnicfRcrCRRcrPlyDelayTime
The absolute maximum delay time. The range of values that can be
configured is from 1 to 10000.
millisecondInteger32r/w
Constraints:
range: 1-10000
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.2.1.6
hpnicfRcrCRRcrPlyLossRate
The packet loss percent of prefix which the CR concerns.
%Integer32r/w
Constraints:
range: 1-100
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.2.1.7
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.3 · 1 row entry · 6 columns
This table contains the matched prefix performance
information.
hpnicfRcrCRMatPrefixPerfEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.48.2.3.1
Entry items
Indexes
hpnicfRcrCRMatPrefPerfAddrType hpnicfRcrCRMatPrefPerfDestIPAddr hpnicfRcrCRMatPrefPerfDestMaskLen
Column Syntax OID
hpnicfRcrCRMatPrefPerfAddrType
The destination IP addresses type of matched prefix which the CR
wants (IPv4 or IPv6).
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.3.1.1
hpnicfRcrCRMatPrefPerfDestIPAddr
The destination IP address of matched prefix which the CR wants.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.3.1.2
hpnicfRcrCRMatPrefPerfDestMaskLen
The destination IP address mask length of matched prefix which
the CR wants.
Integer32
Constraints:
range: 0-32
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.3.1.3
hpnicfRcrCRMatPrefPerfDelayTime
The absolute maximum delay time of prefix which the CR has
configured.
secondInteger32
Constraints:
range: 1-10000
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.3.1.4
hpnicfRcrCRMatPrefPerfLossRate
The packet loss percent of prefix which the CR has configured.
%Integer32
Constraints:
range: 1-100
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.3.1.5
hpnicfRcrCRMatPrefPerfThroughput
The bandwidth of prefix which the CR has monitored.
kbSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.3.1.6
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.4 · 1 row entry · 9 columns
This table contains objects to get adjusted prefix information
which the CR controlled.
hpnicfRcrCRAdjustPrefixEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.48.2.4.1
Entry items
Indexes
hpnicfRcrCRAdjuPrefDestAddrType hpnicfRcrCRAdjuPrefDestAddr hpnicfRcrCRAdjuPrefMaskLen hpnicfRcrCRAdjuPrefPreMRName hpnicfRcrCRAdjuPrefPreOutIfName
Column Syntax OID
hpnicfRcrCRAdjuPrefDestAddrType
The IP address type of the adjusted prefix which CR controlled
(IPv4 or IPv6).
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.4.1.1
hpnicfRcrCRAdjuPrefDestAddr
The IP address of the adjusted prefix which CR controlled.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.4.1.2
hpnicfRcrCRAdjuPrefMaskLen
The IP address mask length of the adjusted prefix which CR
controlled.
Integer32
Constraints:
range: 0-32
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.4.1.3
hpnicfRcrCRAdjuPrefPreMRName
The name of the MR which the previous outbound traffic
flows through.
OctetString
Constraints:
range: 1-32
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.4.1.4
hpnicfRcrCRAdjuPrefPreOutIfName
The name of the external interface on the MR which the previous
outbound traffic flows through.
OctetString
Constraints:
range: 1-48
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.4.1.5
hpnicfRcrCRAdjuPrefCurMRName
The name of the MR which the current outbound traffic flows through.
OctetString
Constraints:
range: 1-32
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.4.1.6
hpnicfRcrCRAdjuPrefCurOutIfName
The name of the external interface on the MR which the current outbound
traffic flows through.
OctetString .1.3.6.1.4.1.11.2.14.11.15.2.48.2.4.1.7
hpnicfRcrCRAdjuPrefPersistTime
The persisting time from the time which the adjusted outbound
traffic has been adjusted by CR to now.
secondSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.4.1.8
hpnicfRcrCRAdjuPrefAgeTime
The time which the adjusted prefix remains.
secondSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.4.1.9