HPN-ICF-L4RDT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
12

hpnicfL4RedirectCacheTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.10.1 · 1 row entry · 7 columns
Open in standard view 
This table contains an entry for each Web Cache
device that this unit is aware of.
hpnicfL4RedirectCacheEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.10.1.1
Each row specifies a known Web Cache device.
Indexes
hpnicfL4RedirectCacheIpAddress
Column Syntax OID
hpnicfL4RedirectCacheIpAddress
This object specifies the IP address of the Web
Cache device.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.14.11.15.2.10.1.1.1
hpnicfL4RedirectCacheRedirectionStatus
This object returns the current state of traffic
redirection to the cache.

If redirection is disabled, this object shall return
disabledNotRedirecting(1).

If a unit cannot be selected to pe…
Enumeration
Enumerated Values:
1disabledNotRedirecting
2enabledNoHealthChecker
3enabledHealthChecking
4enabledHealthCheckOKNotRedirecting
5enabledHealthCheckFailed
6enabledRedirecting
 .1.3.6.1.4.1.11.2.14.11.15.2.10.1.1.2
hpnicfL4RedirectCachePort
This object stores the ifIndex that identifies the
port or link aggregation which provides the connection that
leads to the cache. If only manual cache configuration is
supported, this value must be supplied. The metho…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.10.1.1.3
hpnicfL4RedirectCacheRowStatus
This object is used to create and remove Web Cache
entries.

The following are the valid values that may be written to
RowStatus:

Writing createAndGo(4) to the RowStatus of a non-existent ro…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.11.2.14.11.15.2.10.1.1.4
hpnicfL4RedirectCacheMacAddress
This object defines the MAC address of the attached
Web cache device. If only manual configuration of
the cache is supported, this value must be
supplied. The method of cache configuration can be
ascertained by the pre…
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.11.2.14.11.15.2.10.1.1.5
hpnicfL4RedirectCacheVlan
This object specifies the VLAN which the cache port belongs to.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.10.1.1.6
hpnicfL4RedirectCacheTcpPort
This object specifies the TCP port number that is being redirected
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.10.1.1.7

hpnicfL4RedirectIpExclusionTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.10.2 · 1 row entry · 3 columns
Open in standard view 
This table lists the IP addresses and subnetworks
that Web Cache redirection is not supported for.
          
Some devices may not support addition to this table.
hpnicfL4RedirectIpExclusionEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.10.2.1
Each row contains an IP address or a IP subnetwork
that is being excluded from the redirection.
Indexes
hpnicfL4RedirectIpExclusionIpAddress
Column Syntax OID
hpnicfL4RedirectIpExclusionIpAddress
This object specifies the IP address or the
subnetwork address that is to be excluded.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.14.11.15.2.10.2.1.1
hpnicfL4RedirectIpExclusionMaskLen
This object provides the number of bits in the
subnetwork mask. This mask shall be applied to the excludeIP
address to determine the subnetwork that is to be excluded. A
value of 32 implies that the excludeIP address r…
Integer32r/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.11.2.14.11.15.2.10.2.1.2
hpnicfL4RedirectIpExclusionRowStatus
This object is used to add rows to the Exclusion
Table.

The following are the valid values that may be written to
RowStatus:

Writing createAndGo(4) to the RowStatus of a non-existent row
sh…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.11.2.14.11.15.2.10.2.1.3

hpnicfL4RedirectVlanTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.10.3 · 1 row entry · 2 columns
Open in standard view 
This table contains a row for each VLAN of the packet
which need to be redirected to the Web cache.
hpnicfL4RedirectVlanEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.10.3.1
Each row specifies a VLAN of the packet which need to
be redirected to the Web cache.
Indexes
hpnicfL4RedirectVlanID
Column Syntax OID
hpnicfL4RedirectVlanID
This object specifies the VLAN ID of the packet which
need to be redirected to the Web cache.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.10.3.1.1
hpnicfL4RedirectVlanRowStatus
This object allows ports to be added and removed
from the table.

The following are the valid values that may be written to
RowStatus:

Writing createAndGo(4) to the RowStatus of a non-existe…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.11.2.14.11.15.2.10.3.1.2