HPN-ICF-IPSEC-MONITOR-V2-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
75

hpnicfIPsecTunnelV2Table

table
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.2 · 1 row entry · 33 columns
Open in standard view 
The IPsec Phase-2 Tunnel Table.  There is one entry in this
table for each active IPsec Phase-2 Tunnel.
hpnicfIPsecTunnelV2Entry entry .1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1
Information about hpnicfIPsecTunnelV2Table.
Indexes
hpnicfIPsecTunIndexV2
Column Syntax OID
hpnicfIPsecTunIndexV2
The index of IPsec Phase-2 Tunnel Table. The value of
the index is a number which begins at one and is
incremented with each tunnel that is created. The
value of this object will wrap at 2147483647.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.1
hpnicfIPsecTunIfIndexV2
The interface index( the ifIndex of ifTable ).
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.2
hpnicfIPsecTunIKETunnelIndexV2
The index of the associated IPsec Phase-1 IKE Tunnel
(IKETunIndex in the IKETunnelTable). 2147483647 is defined as
invalid value.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.3
hpnicfIPsecTunIKETunLocalIDTypeV2
The type of the local peer identity for the associated IPsec
Phase-1 IKE Tunnel (IKETunLocalType in the IKETunnelTable).
HpnicfIPsecIDTypeV2
Textual Convention: HpnicfIPsecIDTypeV2 Enumeration
Type Values:
0reserved
1ipv4Addr
2fqdn
3userFqdn
4ipv4AddrSubnet
5ipv6Addr
6ipv6AddrSubnet
7ipv4AddrRange
8ipv6AddrRange
9derAsn1Dn
10derAsn1Gn
11keyId
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.4
hpnicfIPsecTunIKETunLocalIDVal1V2
The value of the local peer identity for the associated IPsec
Phase-1 IKE Tunnel (IKETunLocalValue1 in the IKETunnelTable).

If the local peer type is ipv4Addr/ipv6Addr, this is the IP address
used to iden…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.5
hpnicfIPsecTunIKETunLocalIDVal2V2
The second specification of the local peer's IP address for the
associated IPsec Phase-1 IKE Tunnel (IKETunLocalValue2 in the
IKETunnelTable).

If the local peer type is ipv4AddrSubnet/ipv6AddrSubnet, this…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.6
hpnicfIPsecTunIKETunRemoteIDTypeV2
The type of the remote peer identity for the associated IPsec
Phase-1 IKE Tunnel (IKETunRemoteType in the IKETunnelTable).
HpnicfIPsecIDTypeV2
Textual Convention: HpnicfIPsecIDTypeV2 Enumeration
Type Values:
0reserved
1ipv4Addr
2fqdn
3userFqdn
4ipv4AddrSubnet
5ipv6Addr
6ipv6AddrSubnet
7ipv4AddrRange
8ipv6AddrRange
9derAsn1Dn
10derAsn1Gn
11keyId
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.7
hpnicfIPsecTunIKETunRemoteIDVal1V2
The value of the remote peer identity for the associated IPsec
Phase-1 IKE Tunnel (IKETunRemoteValue1 in the IKETunnelTable).

If the remote peer type is ipv4Addr/ipv6Addr, this is the IP address
used to i…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.8
hpnicfIPsecTunIKETunRemoteIDVal2V2
The second specification of the remote peer's IP address for the
associated IPsec Phase-1 IKE Tunnel(IKETunRemoteValue2 in the
IKETunnelTable).

If the remote peer type is ipv4AddrSubnet/ipv6AddrSubnet, th…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.9
hpnicfIPsecTunLocalAddrTypeV2
The type of the IP address for the local peer of the IPsec Phase-2
Tunnel.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.10
hpnicfIPsecTunLocalAddrV2
The IP address of the local peer for the IPsec Phase-2 Tunnel.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.11
hpnicfIPsecTunRemoteAddrTypeV2
The type of the IP address for the remote peer of the IPsec Phase-2
Tunnel.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.12
hpnicfIPsecTunRemoteAddrV2
The IP address of the remote peer for the IPsec Phase-2 Tunnel.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.13
hpnicfIPsecTunKeyTypeV2
The key negotiate mode used by the IPsec Phase-2 Tunnel.
HpnicfIPsecNegoTypeV2
Textual Convention: HpnicfIPsecNegoTypeV2 Enumeration
Type Values:
1ike
2manual
2147483647invalidType
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.14
hpnicfIPsecTunEncapModeV2
The encapsulation mode used by the IPsec Phase-2 Tunnel.
HpnicfIPsecEncapModeV2
Textual Convention: HpnicfIPsecEncapModeV2 Enumeration
Type Values:
1tunnel
2transport
2147483647invalidMode
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.15
hpnicfIPsecTunInitiatorV2
The initiator of this IPsec tunnel. Value none is used for manual
IPsec tunnel, for there is no initiator or responder in this method.
Enumeration
Enumerated Values:
1local
2remote
2147483647none
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.16
hpnicfIPsecTunLifeSizeV2
The negotiated LifeSize of the IPsec Phase-2 Tunnel in kilobytes.
0 is defined as invalid value.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.17
hpnicfIPsecTunLifeTimeV2
The negotiated LifeTime of the IPsec Phase-2 Tunnel in seconds.
2147483647 is defined as invalid value.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.18
hpnicfIPsecTunRemainTimeV2
The remain time of SA in seconds. 2147483647 is defined as invalid
value.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.19
hpnicfIPsecTunActiveTimeV2
The duration the IPsec Phase-2 Tunnel has been active in
hundredths of seconds. 2147483647 is defined as invalid value.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.20
hpnicfIPsecTunRemainSizeV2
The remain LifeSize of SA in kilobytes. 0 is defined as
invalid value.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.21
hpnicfIPsecTunTotalRefreshesV2
The total number of security association refreshing performed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.22
hpnicfIPsecTunCurrentSaInstancesV2
The number of security associations which are currently active
or expiring.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.23
hpnicfIPsecTunInSaEncryptAlgoV2
The encryption algorithm used by the inbound security association
of the IPsec Phase-2 Tunnel.
HpnicfIPsecEncryptAlgoV2
Textual Convention: HpnicfIPsecEncryptAlgoV2 Enumeration
Type Values:
0none
1desCbc
2ideaCbc
3blowfishCbc
4rc5R16B64Cbc
5tripleDesCbc
6castCbc
7aesCbc
8nsaCbc
9aesCbc128
10aesCbc192
11aesCbc256
12aesCtr
13aesCamelliaCbc
14rc4
2147483647invalidAlg
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.24
hpnicfIPsecTunInSaAhAuthAlgoV2
The authentication algorithm used by the inbound authentication
header (AH) security association of the IPsec Phase-2 Tunnel.
HpnicfIPsecAuthAlgoV2
Textual Convention: HpnicfIPsecAuthAlgoV2 Enumeration
Type Values:
0none
1md5
2sha1
3sha256
4sha384
5sha512
2147483647invalidAlg
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.25
hpnicfIPsecTunInSaEspAuthAlgoV2
The authentication algorithm used by the inbound encapsulation
security protocol(ESP) security association of the IPsec
Phase-2 Tunnel.
HpnicfIPsecAuthAlgoV2
Textual Convention: HpnicfIPsecAuthAlgoV2 Enumeration
Type Values:
0none
1md5
2sha1
3sha256
4sha384
5sha512
2147483647invalidAlg
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.26
hpnicfIPsecTunDiffHellmanGrpV2
The Diffie Hellman Group used by the security association of the
IPsec Phase-2 Tunnel.
HpnicfIPsecDiffHellmanGrpV2
Textual Convention: HpnicfIPsecDiffHellmanGrpV2 Enumeration
Type Values:
0none
1dhGroup1
2dhGroup2
5dhGroup5
14dhGroup14
24dhGroup24
2147483647invalidGroup
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.27
hpnicfIPsecTunOutSaEncryptAlgoV2
The encryption algorithm used by the outbound security
association of the IPsec Phase-2 Tunnel.
HpnicfIPsecEncryptAlgoV2
Textual Convention: HpnicfIPsecEncryptAlgoV2 Enumeration
Type Values:
0none
1desCbc
2ideaCbc
3blowfishCbc
4rc5R16B64Cbc
5tripleDesCbc
6castCbc
7aesCbc
8nsaCbc
9aesCbc128
10aesCbc192
11aesCbc256
12aesCtr
13aesCamelliaCbc
14rc4
2147483647invalidAlg
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.28
hpnicfIPsecTunOutSaAhAuthAlgoV2
The authentication algorithm used by the outbound
authentication header (AH) security association of
the IPsec Phase-2 Tunnel.
HpnicfIPsecAuthAlgoV2
Textual Convention: HpnicfIPsecAuthAlgoV2 Enumeration
Type Values:
0none
1md5
2sha1
3sha256
4sha384
5sha512
2147483647invalidAlg
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.29
hpnicfIPsecTunOutSaEspAuthAlgoV2
The authentication algorithm used by the outbound encapsulation
security protocol(ESP) security association of the IPsec
Phase-2 Tunnel.
HpnicfIPsecAuthAlgoV2
Textual Convention: HpnicfIPsecAuthAlgoV2 Enumeration
Type Values:
0none
1md5
2sha1
3sha256
4sha384
5sha512
2147483647invalidAlg
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.30
hpnicfIPsecTunPolicyNameV2
The policy name used by this IPsec tunnel.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.31
hpnicfIPsecTunPolicyNumV2
The sequence number of policy used by this IPsec tunnel.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.32
hpnicfIPsecTunStatusV2
The status of the IPsec Tunnel.
Enumeration
Enumerated Values:
1initial
2ready
3rekeyed
4closed
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.33

hpnicfIPsecTunnelStatV2Table

table
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.3 · 1 row entry · 17 columns
Open in standard view 
The IPsec Phase-2 Tunnel Statistics Table.
hpnicfIPsecTunnelStatV2Entry entry .1.3.6.1.4.1.11.2.14.11.15.2.126.1.3.1
Information about hpnicfIPsecTunnelStatV2Table.
Indexes
hpnicfIPsecTunIndexV2
Column Syntax OID
hpnicfIPsecTunInOctetsV2
The total number of octets received by this IPsec Phase-2 Tunnel.
This value is accumulated BEFORE determining whether or not the
packet should be decompressed.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.3.1.1
hpnicfIPsecTunInDecompOctetsV2
The total number of decompressed octets received by this IPsec
Phase-2 Tunnel. This value is accumulated AFTER the packet
is decompressed.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.3.1.2
hpnicfIPsecTunInPktsV2
The total number of packets received by this IPsec Phase-2 Tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.3.1.3
hpnicfIPsecTunInDropPktsV2
The total number of packets dropped during receiving process
by this IPsec Phase-2 Tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.3.1.4
hpnicfIPsecTunInReplayDropPktsV2
The total number of packets dropped during
receiving process due to Anti-Replay process
by this IPsec Phase-2 Tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.3.1.5
hpnicfIPsecTunInAuthFailsV2
The total number of inbound authentication's
which ended in failure by this IPsec Phase-2 Tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.3.1.6
hpnicfIPsecTunInDecryptFailsV2
The total number of inbound decryption's
which ended in failure by this IPsec Phase-2 Tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.3.1.7
hpnicfIPsecTunOutOctetsV2
The total number of octets sent by this IPsec Phase-2 Tunnel.
This value is accumulated AFTER determining whether or not
the packet should be compressed.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.3.1.8
hpnicfIPsecTunOutUncompOctetsV2
The total number of uncompressed octets sent by this IPsec Phase-2
Tunnel. This value is accumulated BEFORE the packet is compressed.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.3.1.9
hpnicfIPsecTunOutPktsV2
The total number of packets sent by this IPsec Phase-2 Tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.3.1.10
hpnicfIPsecTunOutDropPktsV2
The total number of packets dropped during sending process
by this IPsec Phase-2 Tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.3.1.11
hpnicfIPsecTunOutEncryptFailsV2
The total number of outbound encryption's which ended in failure
by this IPsec Phase-2 Tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.3.1.12
hpnicfIPsecTunNoMemoryDropPktsV2
The total number of packets dropped due to no enough memory by this
IPsec Phase-2 Tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.3.1.13
hpnicfIPsecTunQueueFullDropPktsV2
The total number of packets dropped due to queue full by this
IPsec Phase-2 Tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.3.1.14
hpnicfIPsecTunInvalidLenDropPktsV2
The total number of packets dropped due to invalid length packet
by this IPsec Phase-2 Tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.3.1.15
hpnicfIPsecTunTooLongDropPktsV2
The total number of packets dropped due to too long packet by this
IPsec Phase-2 Tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.3.1.16
hpnicfIPsecTunInvalidSaDropPktsV2
The total number of packets dropped due to invalid SA by this
IPsec Phase-2 Tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.3.1.17

hpnicfIPsecSaV2Table

table
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.4 · 1 row entry · 7 columns
Open in standard view 
The IPsec Phase-2 Security Protection Index Table.  This table
contains an entry for each active and expiring security association.
hpnicfIPsecSaV2Entry entry .1.3.6.1.4.1.11.2.14.11.15.2.126.1.4.1
Information about hpnicfIPsecSaV2Table.
Indexes
hpnicfIPsecTunIndexV2 hpnicfIPsecSaIndexV2
Column Syntax OID
hpnicfIPsecSaIndexV2
The number of the Sa associated with the Phase-2 Tunnel
Table. The value of this index is a number which begins
at one and is incremented with each Sa associated with
an IPsec Phase-2 Tunnel. The value of this object …
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.4.1.1
hpnicfIPsecSaDirectionV2
The direction of the SA.
Enumeration
Enumerated Values:
1in
2out
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.4.1.2
hpnicfIPsecSaSpiValueV2
The value of the SPI.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.4.1.3
hpnicfIPsecSaSecProtocolV2
The security protocol of the SA.
HpnicfIPsecSaProtocolV2
Textual Convention: HpnicfIPsecSaProtocolV2 Enumeration
Type Values:
0reserved
2ah
3esp
4ipcomp
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.4.1.4
hpnicfIPsecSaEncryptAlgoV2
The encryption algorithm used by the security association
of the IPsec Phase-2 Tunnel.
HpnicfIPsecEncryptAlgoV2
Textual Convention: HpnicfIPsecEncryptAlgoV2 Enumeration
Type Values:
0none
1desCbc
2ideaCbc
3blowfishCbc
4rc5R16B64Cbc
5tripleDesCbc
6castCbc
7aesCbc
8nsaCbc
9aesCbc128
10aesCbc192
11aesCbc256
12aesCtr
13aesCamelliaCbc
14rc4
2147483647invalidAlg
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.4.1.5
hpnicfIPsecSaAuthAlgoV2
The authentication algorithm used by the SA.
HpnicfIPsecAuthAlgoV2
Textual Convention: HpnicfIPsecAuthAlgoV2 Enumeration
Type Values:
0none
1md5
2sha1
3sha256
4sha384
5sha512
2147483647invalidAlg
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.4.1.6
hpnicfIPsecSaStatusV2
The status of the SA.
Enumeration
Enumerated Values:
1active
2expiring
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.4.1.7

hpnicfIPsecTrafficV2Table

table
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.5 · 1 row entry · 18 columns
Open in standard view 
The IPsec Phase-2 Tunnel Traffic Table.
hpnicfIPsecTrafficV2Entry entry .1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1
Information about hpnicfIPsecTrafficV2Table.
Indexes
hpnicfIPsecTunIndexV2
Column Syntax OID
hpnicfIPsecTrafficLocalTypeV2
The type of the local peer's traffic. Possible values are:
1) A single IP address
2) An IP address range
3) An IP subnet
HpnicfIPsecTrafficTypeV2
Textual Convention: HpnicfIPsecTrafficTypeV2 Enumeration
Type Values:
1ipv4Addr
4ipv4AddrSubnet
5ipv6Addr
6ipv6AddrSubnet
7ipv4AddrRange
8ipv6AddrRange
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.1
hpnicfIPsecTrafficLocalAddr1TypeV2
The type of the first IP address specification for the local peer's
traffic.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.2
hpnicfIPsecTrafficLocalAddr1V2
The first IP address specification of the local peer's traffic.

If the local peer's traffic type is single IP address, this is the
IP address.

If the local peer's traffic type is IP subnet,…
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.3
hpnicfIPsecTrafficLocalAddr2TypeV2
The type of the second IP address specification for the local peer's
traffic.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.4
hpnicfIPsecTrafficLocalAddr2V2
The second IP address specification of the local peer's traffic.

If the local peer's traffic type is single IP address, this is the
IP address.

If the local peer's traffic type is IP subnet…
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.5
hpnicfIPsecTrafficLocalProtocol1V2
The first protocol number specification of the local peer's traffic.

If the protocol type of the local peer's traffic is single protocol,
this is the protocol number.

If the protocol type o…
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.6
hpnicfIPsecTrafficLocalProtocol2V2
The second protocol number specification of the local peer's traffic.

If the protocol type of the local peer's traffic is single protocol,
this is the protocol number.

If the protocol type …
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.7
hpnicfIPsecTrafficLocalPort1V2
The first port number specification of the local peer's traffic.

If the port type of the local peer's traffic is single port, this is
the port number.

If the port type of the local peer's t…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.8
hpnicfIPsecTrafficLocalPort2V2
The second port number specification of the local peer's traffic.

If the port type of the local peer's traffic is single port, this is
the port number.

If the port type of the local peer's …
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.9
hpnicfIPsecTrafficRemoteTypeV2
The type of the remote peer's traffic. Possible values are:
1) A single IP address
2) An IP address range
3) An IP subnet
HpnicfIPsecTrafficTypeV2
Textual Convention: HpnicfIPsecTrafficTypeV2 Enumeration
Type Values:
1ipv4Addr
4ipv4AddrSubnet
5ipv6Addr
6ipv6AddrSubnet
7ipv4AddrRange
8ipv6AddrRange
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.10
hpnicfIPsecTrafficRemAddr1TypeV2
The type of the first IP address specification for the remote peer's
traffic.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.11
hpnicfIPsecTrafficRemAddr1V2
The first IP address specification of the remote peer's traffic.

If the remote traffic type is single IP address, this is the IP address.

If the remote traffic type is IP subnet, this is th…
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.12
hpnicfIPsecTrafficRemAddr2TypeV2
The type of the second IP address specification for the remote peer's
traffic.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.13
hpnicfIPsecTrafficRemAddr2V2
The second IP address specification of the remote peer's traffic.

If the remote traffic type is single IP address, this is the IP address.

If the remote traffic type is IP subnet, this is t…
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.14
hpnicfIPsecTrafficRemoPro1V2
The first protocol number specification of the remote peer's traffic.

If the protocol type of the remote peer's traffic is single protocol,
this is the protocol number.

If the protocol type…
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.15
hpnicfIPsecTrafficRemoPro2V2
The second protocol number specification of the remote peer's traffic.

If the protocol type of the remote peer's traffic is single protocol,
this is the protocol number.

If the protocol typ…
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.16
hpnicfIPsecTrafficRemPort1V2
The first port number specification of the remote peer's traffic.

If the port type of the remote peer's traffic is single port,
this is the port number.

If the port type of the remote peer'…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.17
hpnicfIPsecTrafficRemPort2V2
The second port number specification of the remote peer's traffic.

If the port type of the remote peer's traffic is single port,
this is the port number.

If the port type of the remote peer…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.18