HPN-ICF-IPSEC-MONITOR-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
4
Rows
4
Columns
60
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1 · 1 row entry · 26 columns
The IPSec Phase-2 Tunnel Table. There is one
entry in this table for each active IPSec Phase-2 Tunnel.
hpnicfIPSecTunnelEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1
Information about hpnicfIPSecTunnelTable.
Indexes
hpnicfIPSecTunIfIndex hpnicfIPSecTunEntryIndex hpnicfIPSecTunIndex
Column Syntax OID
hpnicfIPSecTunIfIndex
The interface index( the ifIndex of ifTable ).
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.1
hpnicfIPSecTunEntryIndex
The index of IPSec policy applied in the interface.
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.2
hpnicfIPSecTunIndex
The index of IPSec Phase-2 Tunnel Table. The value of
the index is a number which begins at one and is
incremented with each tunnel that is created. The
value of this object will wrap at 2,147,483,647.
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.3
hpnicfIPSecTunIKETunnelIndex
The index of the associated IPSec Phase-1 IKE Tunnel
(IKETunIndex in the IKETunnelTable). 2147483647 is defined as
invalid value.
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.4
hpnicfIPSecTunLocalAddr
The IP address of the local peer for the IPSec Phase-2
Tunnel. 0.0.0.0 is defined as invalid value.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.5
hpnicfIPSecTunRemoteAddr
The IP address of the remote peer for the IPSec Phase-2
Tunnel. 0.0.0.0 is defined as invalid value.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.6
hpnicfIPSecTunKeyType
The key negotiate mode used by the IPSec Phase-2 Tunnel.
HpnicfIPSecNegoType
Textual Convention: HpnicfIPSecNegoType Enumeration
Type Values:
1ike
2manual
2147483647invalidType
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.7
hpnicfIPSecTunEncapMode
The encapsulation mode used by the IPSec Phase-2 Tunnel.
HpnicfEncapMode
Textual Convention: HpnicfEncapMode Enumeration
Type Values:
1tunnel
2transport
2147483647invalidMode
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.8
hpnicfIPSecTunInitiator
The initiator of this IPSec tunnel. Value none is used for manual
IPsec tunnel, for there is no initiator or responder in this method.
Enumeration
Enumerated Values:
1local
2remote
2147483647none
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.9
hpnicfIPSecTunLifeSize
The negotiated LifeSize of the IPSec Phase-2 Tunnel in kilobytes.
0 is defined as invalid value.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.10
hpnicfIPSecTunLifeTime
The negotiated LifeTime of the IPSec Phase-2 Tunnel in seconds.
2147483647 is defined as invalid value.
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.11
hpnicfIPSecTunRemainTime
The remain time of SA in seconds. 2147483647 is defined as invalid
value.
Integer32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.12
hpnicfIPSecTunActiveTime
The duration the IPSec Phase-2 Tunnel has been active in
hundredths of seconds. 2147483647 is defined as invalid value.
Integer32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.13
hpnicfIPSecTunRemainSize
The remain LifeSize of SA in kilobytes. 0 is defined as
invalid value.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.14
hpnicfIPSecTunTotalRefreshes
The total number of security association refreshing performed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.15
hpnicfIPSecTunCurrentSaInstances
The number of security associations which are currently active
or expiring.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.16
hpnicfIPSecTunInSaEncryptAlgo
The encryption algorithm used by the inbound security association
of the IPSec Phase-2 Tunnel.
HpnicfEncryptAlgo
Textual Convention: HpnicfEncryptAlgo Enumeration
Type Values:
0none
1desCbc
2ideaCbc
3blowfishCbc
4rc5R16B64Cbc
5tripledesCbc
6castCbc
7aesCbc
8nsaCbc
9aesCbc128
10aesCbc192
11aesCbc256
2147483647invalidAlg
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.17
hpnicfIPSecTunInSaAhAuthAlgo
The authentication algorithm used by the inbound authentication
header (AH) security association of the IPSec Phase-2 Tunnel.
HpnicfAuthAlgo
Textual Convention: HpnicfAuthAlgo Enumeration
Type Values:
0none
1md5
2sha
2147483647invalidAlg
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.18
hpnicfIPSecTunInSaEspAuthAlgo
The authentication algorithm used by the inbound encapsulation
security protocol(ESP) security association of the IPSec
Phase-2 Tunnel.
HpnicfAuthAlgo
Textual Convention: HpnicfAuthAlgo Enumeration
Type Values:
0none
1md5
2sha
2147483647invalidAlg
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.19
hpnicfIPSecTunDiffHellmanGrp
The Diffie Hellman Group used by the security association of the
IPSec Phase-2 Tunnel.
HpnicfDiffHellmanGrp
Textual Convention: HpnicfDiffHellmanGrp Enumeration
Type Values:
0none
1modp768
2modp1024
5modp1536
14modp2048
2147483647invalidGroup
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.20
hpnicfIPSecTunOutSaEncryptAlgo
The encryption algorithm used by the outbound security
association of the IPSec Phase-2 Tunnel.
HpnicfEncryptAlgo
Textual Convention: HpnicfEncryptAlgo Enumeration
Type Values:
0none
1desCbc
2ideaCbc
3blowfishCbc
4rc5R16B64Cbc
5tripledesCbc
6castCbc
7aesCbc
8nsaCbc
9aesCbc128
10aesCbc192
11aesCbc256
2147483647invalidAlg
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.21
hpnicfIPSecTunOutSaAhAuthAlgo
The authentication algorithm used by the outbound
authentication header (AH) security association of
the IPSec Phase-2 Tunnel.
HpnicfAuthAlgo
Textual Convention: HpnicfAuthAlgo Enumeration
Type Values:
0none
1md5
2sha
2147483647invalidAlg
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.22
hpnicfIPSecTunOutSaEspAuthAlgo
The authentication algorithm used by the outbound encapsulation
security protocol(ESP) security association of the IPSec
Phase-2 Tunnel.
HpnicfAuthAlgo
Textual Convention: HpnicfAuthAlgo Enumeration
Type Values:
0none
1md5
2sha
2147483647invalidAlg
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.23
hpnicfIPSecTunPolicyName
The policy name used by this IPSec tunnel.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.24
hpnicfIPSecTunPolicyNum
The sequence number of policy used by this IPSec tunnel.
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.25
hpnicfIPSecTunStatus
The status of the IPSec Tunnel.
Enumeration
Enumerated Values:
1initial
2ready
3rekeyed
4closed
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.26
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.2 · 1 row entry · 17 columns
The IPSec Phase-2 Tunnel Statistics Table.
hpnicfIPSecTunnelStatEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1
Information about hpnicfIPSecTunnelStatTable.
Indexes
hpnicfIPSecTunIfIndex hpnicfIPSecTunEntryIndex hpnicfIPSecTunIndex
Column Syntax OID
hpnicfIPSecTunInOctets
The total number of octets received by this IPSec Phase-2 Tunnel.
This value is accumulated BEFORE determining whether or not the
packet should be decompressed.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.1
hpnicfIPSecTunInDecompOctets
The total number of decompressed octets received by this IPSec
Phase-2 Tunnel. This value is accumulated AFTER the packet
is decompressed.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.2
hpnicfIPSecTunInPkts
The total number of packets received by this IPSec Phase-2 Tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.3
hpnicfIPSecTunInDropPkts
The total number of packets dropped during receiving process
by this IPSec Phase-2 Tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.4
hpnicfIPSecTunInReplayDropPkts
The total number of packets dropped during
receiving process due to Anti-Replay process
by this IPSec Phase-2 Tunnel.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.5
hpnicfIPSecTunInAuthFails
The total number of inbound authentication's
which ended in failure by this IPSec Phase-2 Tunnel.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.6
hpnicfIPSecTunInDecryptFails
The total number of inbound decryption's
which ended in failure by this IPSec Phase-2 Tunnel.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.7
hpnicfIPSecTunOutOctets
The total number of octets sent by this IPSec Phase-2 Tunnel.
This value is accumulated AFTER determining whether or not
the packet should be compressed.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.8
hpnicfIPSecTunOutUncompOctets
The total number of uncompressed octets sent by this IPSec Phase-2
Tunnel.This value is accumulated BEFORE the packet is compressed.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.9
hpnicfIPSecTunOutPkts
The total number of packets sent by this IPSec Phase-2 Tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.10
hpnicfIPSecTunOutDropPkts
The total number of packets dropped during sending process
by this IPSec Phase-2 Tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.11
hpnicfIPSecTunOutEncryptFails
The total number of outbound encryption's which ended in failure
by this IPSec Phase-2 Tunnel.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.12
hpnicfIPSecTunNoMemoryDropPkts
The total number of packets dropped due to no enough memory by this
IPSec Phase-2 Tunnel.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.13
hpnicfIPSecTunQueueFullDropPkts
The total number of packets dropped due to queue full by this
IPSec Phase-2 Tunnel.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.14
hpnicfIPSecTunInvalidLenDropPkts
The total number of packets dropped due to invalid length packet
by this IPSec Phase-2 Tunnel.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.15
hpnicfIPSecTunTooLongDropPkts
The total number of packets dropped due to too long packet by this
IPSec Phase-2 Tunnel.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.16
hpnicfIPSecTunInvalidSaDropPkts
The total number of packets dropped due to invalid SA by this
IPSec Phase-2 Tunnel.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.17
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.3 · 1 row entry · 7 columns
The IPSec Phase-2 Security Protection Index Table.  This table
contains an entry for each active and expiring security association.
hpnicfIPSecSaEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.7.1.3.1
Information about hpnicfIPSecSaTable.
Indexes
hpnicfIPSecTunIfIndex hpnicfIPSecTunEntryIndex hpnicfIPSecTunIndex hpnicfIPSecSaIndex
Column Syntax OID
hpnicfIPSecSaIndex
The number of the Sa associated with the Phase-2 Tunnel
Table. The value of this index is a number which begins
at one and is incremented with each Sa associated with
an IPSec Phase-2 Tunnel. The value of this object …
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.3.1.1
hpnicfIPSecSaDirection
The direction of the SA.
Enumeration
Enumerated Values:
1in
2out
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.3.1.2
hpnicfIPSecSaValue
The value of the SPI.
Unsigned32
Constraints:
range: 1-4294967295
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.3.1.3
hpnicfIPSecSaProtocol
The security protocol of the SA.
HpnicfSaProtocol
Textual Convention: HpnicfSaProtocol Enumeration
Type Values:
0reserved
1isakmp
2ah
3esp
4ipcomp
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.3.1.4
hpnicfIPSecSaEncryptAlgo
The encryption algorithm used by the security association
of the IPSec Phase-2 Tunnel.
HpnicfEncryptAlgo
Textual Convention: HpnicfEncryptAlgo Enumeration
Type Values:
0none
1desCbc
2ideaCbc
3blowfishCbc
4rc5R16B64Cbc
5tripledesCbc
6castCbc
7aesCbc
8nsaCbc
9aesCbc128
10aesCbc192
11aesCbc256
2147483647invalidAlg
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.3.1.5
hpnicfIPSecSaAuthAlgo
The authentication algorithm used by the SA.
HpnicfAuthAlgo
Textual Convention: HpnicfAuthAlgo Enumeration
Type Values:
0none
1md5
2sha
2147483647invalidAlg
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.3.1.6
hpnicfIPSecSaStatus
The status of the SA.
Enumeration
Enumerated Values:
1active
2expiring
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.3.1.7
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.4 · 1 row entry · 10 columns
The IPSec Phase-2 Tunnel Traffic Table.
hpnicfIPSecTrafficEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1
Information about hpnicfIPSecTrafficTable.
Indexes
hpnicfIPSecTunIfIndex hpnicfIPSecTunEntryIndex hpnicfIPSecTunIndex
Column Syntax OID
hpnicfIPSecTrafficLocalType
The type of local peer. Possible values are: a single
IP address, or an IP address range, or an IP subnet.
HpnicfTrafficType
Textual Convention: HpnicfTrafficType Enumeration
Type Values:
1ipv4Addr
4ipv4AddrSubnet
5ipv6Addr
6ipv6AddrSubnet
7ipv4AddrRange
8ipv6AddrRange
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.1
hpnicfIPSecTrafficLocalAddr1
The first specification of local peer's IP address. If
the local peer type is single IP address, then this is the
value of the IP address. If the local peer type is IP subnet,
then this is the value of the subnet. If th…
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.2
hpnicfIPSecTrafficLocalAddr2
The second specification of local peer's IP address. If the local
peer type is single IP address, then this is the value of the
IP address. If the local peer type is IP subnet, then this is
the value of the subnet mask.…
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.3
hpnicfIPSecTrafficLocalProtocol
The protocol number of the local peer's traffic.
Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.4
hpnicfIPSecTrafficLocalPort
The port number of the local peer's traffic.
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.5
hpnicfIPSecTrafficRemoteType
The type of remote peer. Possible values are: a single
IP address, or an IP address range, or an IP subnet.
HpnicfTrafficType
Textual Convention: HpnicfTrafficType Enumeration
Type Values:
1ipv4Addr
4ipv4AddrSubnet
5ipv6Addr
6ipv6AddrSubnet
7ipv4AddrRange
8ipv6AddrRange
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.6
hpnicfIPSecTrafficRemoteAddr1
The first specification of remote peer's IP address.
If the remote peer type is single IP address, then
this is the value of the IP address. If the remote
peer type is IP subnet, then this is the value
of the subnet. If…
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.7
hpnicfIPSecTrafficRemoteAddr2
Single IP address, then this is the value of the IP
address. If the remote peer type is IP subnet,
then this is the value of the subnet mask. If the
remote peer type is IP address range, then this
is the value of ending…
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.8
hpnicfIPSecTrafficRemoteProtocol
The protocol number of the remote peer's traffic.
Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.9
hpnicfIPSecTrafficRemotePort
The port number of the remote peer's traffic.
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.10