HPN-ICF-HPEOC-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
5
Rows
5
Columns
17
.1.3.6.1.4.1.11.2.14.11.15.2.84.1.2 · 1 row entry · 1 columns
This table implements the management of CLT(Coax Line Terminal)
VLAN.
hpnicfHPEOCCltVlanManEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.84.1.2.1
The entry of the table hpnicfHPEOCCltVlanManTable.
Indexes
IF-MIBifIndex
Column Syntax OID
hpnicfHPEOCCltEthPortType
Control CLT ethernet ports' type,
normal : port which used for normal translation,
debug : port which used for debug.
Enumerationr/w
Enumerated Values:
1normal
2debug
.1.3.6.1.4.1.11.2.14.11.15.2.84.1.2.1.1
.1.3.6.1.4.1.11.2.14.11.15.2.84.1.3 · 1 row entry · 3 columns
This table implements the management of CLT(Coax Line Terminal).
hpnicfHPEOCCltSysManEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.84.1.3.1
The entry of the table hpnicfHPEOCCltSysManTable.
Indexes
IF-MIBifIndex
Column Syntax OID
hpnicfHPEOCCltDescr
Set the description of CLT.
OctetStringr/w
Constraints:
range: 0-126
.1.3.6.1.4.1.11.2.14.11.15.2.84.1.3.1.1
hpnicfHPEOCCltFwVersion
EOC firmware version. If the object length is
zero, it means the version is unknown.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.11.2.14.11.15.2.84.1.3.1.2
hpnicfHPEOCCltLinkState
The cable port's link state. The physicaldown(1) state indicates
that the CLT is not powered on. The linkdown(2) state indicates
that the CLT is powered on, but registers fail. The linkup(3)
state indicates that the …
Enumeration
Enumerated Values:
1physicaldown
2linkdown
3linkup
4loopback
.1.3.6.1.4.1.11.2.14.11.15.2.84.1.3.1.3
.1.3.6.1.4.1.11.2.14.11.15.2.84.1.4 · 1 row entry · 3 columns
This table implements the management of CNUs.
hpnicfHPEOCCnuSysManEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.84.1.4.1
The entry of the table hpnicfHPEOCCnuSysManTable.
Indexes
IF-MIBifIndex
Column Syntax OID
hpnicfHPEOCCnuBcastControl
Broadcast storm suppression status.
true(1) - Broadcast storm suppression enable.
false(2) - Broadcast storm suppression disable.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.11.2.14.11.15.2.84.1.4.1.1
hpnicfHPEOCCnuAnonymStatus
Anonymity status.
true(1) - the user which uses the CNU is anonymous.
false(2) - the user which uses the CNU has an account.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.11.2.14.11.15.2.84.1.4.1.2
hpnicfHPEOCCnuMacLimit
Configure the max number of MAC address entries which can access
through the CNU, it ranges from 1 to 8.
Otherwise,
If configure 0, the CNU won't limit the MAC address entry.
If configure 0xFF, it means no MAC address e…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.15.2.84.1.4.1.3
.1.3.6.1.4.1.11.2.14.11.15.2.84.2.1 · 1 row entry · 8 columns
This table defines the primary parameters of the
cable information.
hpnicfHPEOCCableInfoEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1
The entry of the table hpnicfHPEOCCableInfoTable.
Indexes
IF-MIBifIndex
Column Syntax OID
hpnicfHPEOCFECErrors
The cable port's FEC bits errors ratio. FEC means the
payload Forward Error Correction. It's a technology of
controlling errors. Packets in transmission is checked by
the receiver, if error occurs, the receiver will …
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.1
hpnicfHPEOCAvgBitsPerCarrier
The cable port's average bits per carrier.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.2
hpnicfHPEOCAvgSNRPerCarrier
The cable port's signal noise ratio(SNR) bits per carrier.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.3
hpnicfHPEOCAvgInPBCRCErrors
The input PB CRC errors on average.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.4
hpnicfHPEOCInTotalPkts
The total number of packets(including bad packets)
received on this interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.5
hpnicfHPEOCAvgOutPower
The cable port's power sent on average, the unit is db.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.6
hpnicfHPEOCAvgOutPBCRCErrors
The cable port's physical block(PB) cyclic redundancy
check(CRC) errors sent on average.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.7
hpnicfHPEOCOutTotalPkts
The total count of the packets(including bad packets)
sent on this interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.8
.1.3.6.1.4.1.11.2.14.11.15.2.84.2.2 · 1 row entry · 2 columns
This table defines the bits per symbol parameters of the
cable line.
hpnicfHPEOCBitPerSymbolEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.84.2.2.1
The entry of the table hpnicfHPEOCBitPerSymbolTable.
Indexes
IF-MIBifIndex hpnicfHPEOCBitPerSymbolIndex
Column Syntax OID
hpnicfHPEOCBitPerSymbolIndex
The index of the hpnicfHPEOCBitPerSymbolTable.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.15.2.84.2.2.1.1
hpnicfHPEOCBitPerSymbol
hpnicfHPEOCBitPerSymbol returns all the bits per symbol on the fixed
frequency. Each 4 bits stand for one value, all the values
picking-up will make up a cable bit map.
OctetString .1.3.6.1.4.1.11.2.14.11.15.2.84.2.2.1.2