HPN-ICF-DHCP-SNOOP2-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
30

hpnicfDhcpSnoop2BindTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.1 · 1 row entry · 7 columns
Open in standard view 
The table containing information of DHCP clients listened by
DHCP snooping.
hpnicfDhcpSnoop2BindEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.124.2.1.1
An entry containing information of DHCP clients.
Indexes
hpnicfDhcpSnoop2BindIpAddr hpnicfDhcpSnoop2BindVlanId hpnicfDhcpSnoop2BindSecVlanId
Column Syntax OID
hpnicfDhcpSnoop2BindIpAddr
DHCP client's IP addresses collected by DHCP snooping.
INET-ADDRESS-MIBInetAddressIPv4
Textual Convention: INET-ADDRESS-MIBInetAddressIPv4 OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.14.11.15.2.124.2.1.1.1
hpnicfDhcpSnoop2BindVlanId
DHCP client's VLAN ID collected by DHCP snooping.
Unsigned32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.11.2.14.11.15.2.124.2.1.1.2
hpnicfDhcpSnoop2BindSecVlanId
DHCP client's second VLAN ID collected by DHCP snooping.
65535 means no second VLAN.
Unsigned32
Constraints:
range: 1-4094
range: 65535-65535
 .1.3.6.1.4.1.11.2.14.11.15.2.124.2.1.1.3
hpnicfDhcpSnoop2BindMacAddr
DHCP client's MAC address collected by DHCP snooping.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.11.2.14.11.15.2.124.2.1.1.4
hpnicfDhcpSnoop2BindLease
Left lease time in seconds collected by DHCP snooping.
The value of this object cannot be 0.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.2.124.2.1.1.5
hpnicfDhcpSnoop2BindPortIndex
DHCP client's port index collected by DHCP snooping.
The value of zero means unknown port.
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.124.2.1.1.6
hpnicfDhcpSnoop2BindRowStatus
RowStatus. Only destroy action is allow to use.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.11.2.14.11.15.2.124.2.1.1.7

hpnicfDhcpSnoop2IfConfigTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.2 · 1 row entry · 16 columns
Open in standard view 
A table is used to configure DHCP snooping functions on ports.
hpnicfDhcpSnoop2IfConfigEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.124.2.2.1
An entry containing DHCP snooping configurations of ports.
Indexes
IF-MIBifIndex
Column Syntax OID
hpnicfDhcpSnoop2IfTrustStatus
Trusted status of the port.
Enumerationr/w
Enumerated Values:
0untrusted
1trusted
 .1.3.6.1.4.1.11.2.14.11.15.2.124.2.2.1.1
hpnicfDhcpSnoop2IfCheckMac
If the value is 'true', MAC address of DHCP packets received
on the port will be checked.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.124.2.2.1.2
hpnicfDhcpSnoop2IfCheckRequest
If the value is 'true', DHCP request packets will be checked.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.124.2.2.1.3
hpnicfDhcpSnoop2IfRateLimit
The rate limit in Kbps.
If the value is 0, there is no rate limit on the port.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.2.124.2.2.1.4
hpnicfDhcpSnoop2IfRecordBind
If the value is 'true', information of DHCP packets received
on the port will be recorded.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.124.2.2.1.5
hpnicfDhcpSnoop2IfMaxLearnNum
The maximum number of binding entries that could be learned on
the port.
If the value is 0, it means that there is no threshold on the
port.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.11.2.14.11.15.2.124.2.2.1.6
hpnicfDhcpSnoop2IfOpt82Enable
If DHCP snooping supports option 82 functions, the
value is 'true'.
If DHCP snooping does NOT support option 82 functions,
the value is 'false'.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.124.2.2.1.7
hpnicfDhcpSnoop2IfOpt82Strategy
The strategy of DHCP snooping handling option 82.

'drop' indicates DHCP snooping discarding the request
packet including option 82.

'keep' indicates DHCP snooping accepting the request
pack…
Enumerationr/w
Enumerated Values:
1drop
2keep
3replace
 .1.3.6.1.4.1.11.2.14.11.15.2.124.2.2.1.8
hpnicfDhcpSnoop2IfOpt82CIDMode
The mode of filling in the circuit ID suboption
of DHCP option 82.

'normal' is the standard mode.

'verbose' is the detailed mode.

'userDefine' is the user-defined mode.
…
Enumerationr/w
Enumerated Values:
1normal
2verbose
3userDefine
 .1.3.6.1.4.1.11.2.14.11.15.2.124.2.2.1.9
hpnicfDhcpSnoop2IfOpt82CIDNodeType
Type of access node identifier that is used to fill
in the circuit ID suboption of option 82 when the value
of hpnicfDhcpSnoop2IfOption82CIDMode is set to 'verbose'.

The SET operation of this object must …
Enumerationr/w
Enumerated Values:
1invalid
2mac
3sysname
4userDefine
 .1.3.6.1.4.1.11.2.14.11.15.2.124.2.2.1.10
hpnicfDhcpSnoop2IfOpt82CIDNodeStr
The string defined by user to fill in the
node identifier in the verbose mode.

If the value of hpnicfDhcpSnoop2IfOpt82CIDMode is NOT
'verbose', or the value of hpnicfDhcpSnoop2IfOpt82CIDNodeType
is NOT 'u…
OctetStringr/w
Constraints:
range: 0-50
 .1.3.6.1.4.1.11.2.14.11.15.2.124.2.2.1.11
hpnicfDhcpSnoop2IfOpt82CIDStr
The string defined by user to fill in the circuit ID
suboption of option 82 in the user-define mode.

If the value of hpnicfDhcpSnoop2IfOpt82CIDMode is
NOT 'userDefine', it is set to a zero-length string
a…
OctetStringr/w
Constraints:
range: 0-0
range: 3-63
 .1.3.6.1.4.1.11.2.14.11.15.2.124.2.2.1.12
hpnicfDhcpSnoop2IfOpt82CIDFormat
The format of the circuit ID suboption of DHCP
option 82.

'hex' is the hex format.

'ascii' is the ascii format.

'undefine' is the undefine format.

If the value…
Enumerationr/w
Enumerated Values:
1hex
2ascii
3undefine
 .1.3.6.1.4.1.11.2.14.11.15.2.124.2.2.1.13
hpnicfDhcpSnoop2IfOpt82RIDMode
The mode of filling in the remote ID suboption
of DHCP option 82.

'normal' is the standard mode.

'userDefine' is the user-defined mode.

'sysname' is the sysname mode.
…
Enumerationr/w
Enumerated Values:
1normal
2sysname
3userDefine
 .1.3.6.1.4.1.11.2.14.11.15.2.124.2.2.1.14
hpnicfDhcpSnoop2IfOpt82RIDStr
The string defined by user to fill in the
remote ID in the user-defined mode.

If the value of hpnicfDhcpSnoop2IfOpt82RIDMode is
NOT 'userDefine', this object is set with a zero-length
string automatically…
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.11.2.14.11.15.2.124.2.2.1.15
hpnicfDhcpSnoop2IfOpt82RIDFormat
The format of DHCP option 82 remote ID in 'normal' mode.

'hex' is the hex format.

'ascii' is the ascii format.

If the value of hpnicfDhcpSnoop2IfOpt82RIDMode is
'sysname' or …
Enumerationr/w
Enumerated Values:
1hex
2ascii
 .1.3.6.1.4.1.11.2.14.11.15.2.124.2.2.1.16

hpnicfDhcpSnoop2IfVlanCIDTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.3 · 1 row entry · 3 columns
Open in standard view 
A table containing the information of the circuit ID
suboption of DHCP option 82 in VLAN.
hpnicfDhcpSnoop2IfVlanCIDEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.124.2.3.1
An entry containing the information of the circuit ID
suboption of DHCP option 82 in VLAN.
Indexes
IF-MIBifIndex hpnicfDhcpSnoop2IfVlanCIDVlanIndex
Column Syntax OID
hpnicfDhcpSnoop2IfVlanCIDVlanIndex
VLAN ID.
Unsigned32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.11.2.14.11.15.2.124.2.3.1.1
hpnicfDhcpSnoop2IfVlanCIDStr
The string defined by user to fill in the
circuit ID suboption of option 82.
OctetStringr/w
Constraints:
range: 3-63
 .1.3.6.1.4.1.11.2.14.11.15.2.124.2.3.1.2
hpnicfDhcpSnoop2IfVlanCIDRowStatus
Operation status of this table entry.
Three actions are used: active,
createAndGo, destroy.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.11.2.14.11.15.2.124.2.3.1.3

hpnicfDhcpSnoop2IfVlanRIDTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.4 · 1 row entry · 4 columns
Open in standard view 
A table containing the information of the remote ID
suboption of DHCP option 82 in VLAN.
hpnicfDhcpSnoop2IfVlanRIDEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.124.2.4.1
An entry containing the information of the remote ID
suboption of DHCP option 82 in VLAN.
Indexes
IF-MIBifIndex hpnicfDhcpSnoop2IfVlanRIDVlanIndex
Column Syntax OID
hpnicfDhcpSnoop2IfVlanRIDVlanIndex
VLAN ID.
Unsigned32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.11.2.14.11.15.2.124.2.4.1.1
hpnicfDhcpSnoop2IfVlanRIDMode
The mode of filling in the remote ID suboption
of DHCP option 82 in VLAN.

'sysname' indicates using the device sysname to fill in
the suboption.

'userDefine' indicates using the string defi…
Enumerationr/w
Enumerated Values:
1sysname
2userDefine
 .1.3.6.1.4.1.11.2.14.11.15.2.124.2.4.1.2
hpnicfDhcpSnoop2IfVlanRIDStr
The string used to fill in the remote ID suboption.

If the value of hpnicfDhcpSnoop2IfVlanRIDMode is NOT 'userDefine',
this object is set with a zero-length string automatically.
Otherwise it must be set …
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.11.2.14.11.15.2.124.2.4.1.3
hpnicfDhcpSnoop2IfVlanRIDRowStatus
Operation status of this table entry.
Three actions are used: active,
createAndGo, destroy.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.11.2.14.11.15.2.124.2.4.1.4