HPN-ICF-ATM-DXI-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
14

hpnicfAtmDxiPvcTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.49.2.1 · 1 row entry · 6 columns
Open in standard view 
This table describes information of PVC in ATM-DXI interface.
hpnicfAtmDxiPvcEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.49.2.1.1
The entry of hpnicfAtmDxiPvcTable.
Indexes
RFC1213-MIBifIndex hpnicfAtmDxiPvcVpi hpnicfAtmDxiPvcVci
Column Syntax OID
hpnicfAtmDxiPvcVpi
The value of VPI. It can't be 0 if hpnicfAtmDxiPvcVci is 0.
Integer32
Constraints:
range: 0-15
 .1.3.6.1.4.1.11.2.14.11.15.2.49.2.1.1.1
hpnicfAtmDxiPvcVci
The value of VCI. It can't be 0 if hpnicfAtmDxiPvcVpi is 0.
Integer32
Constraints:
range: 0-63
 .1.3.6.1.4.1.11.2.14.11.15.2.49.2.1.1.2
hpnicfAtmDxiPvcDFA
The index of PVC. It is equal with vci and VPI. And this node value
is correlate with hpnicfAtmDxiPvcVpi and hpnicfAtmDxiPvcVci.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.49.2.1.1.3
hpnicfAtmDxiPvcEncType
Encapsulation type of the frame.
Enumerationr/w
Enumerated Values:
1snap
2nlpid
3mux
 .1.3.6.1.4.1.11.2.14.11.15.2.49.2.1.1.4
hpnicfAtmDxiPvcMapCount
The number of map. One map can only associate with one PVC, but
one PVC can associate with 32 maps. This node is the map count
which one PVC associated with.
Integer32r/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.11.2.14.11.15.2.49.2.1.1.5
hpnicfAtmDxiPvcRowStatus
Only support 'destroy' 'createAndGo' and 'active'.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.11.2.14.11.15.2.49.2.1.1.6

hpnicfAtmDxiMapTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.49.2.2 · 1 row entry · 8 columns
Open in standard view 
This table describes PVC map information.
hpnicfAtmDxiMapEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.49.2.2.1
The entry of hpnicfAtmDxiMapTable.
Indexes
RFC1213-MIBifIndex hpnicfAtmDxiMapPeerIpType hpnicfAtmDxiMapPeerIp hpnicfAtmDxiMapPvcVpi hpnicfAtmDxiMapPvcVci hpnicfAtmDxiMapType
Column Syntax OID
hpnicfAtmDxiMapPeerIpType
The type of ip address: IPv4 or IPv6.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.14.11.15.2.49.2.2.1.1
hpnicfAtmDxiMapPeerIp
The peer ip address. This ip address is the peer ip
address which the frame will arrive.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.15.2.49.2.2.1.2
hpnicfAtmDxiMapPvcVpi
The VPI of PVC. It can't be 0 if hpnicfAtmDxiMapPvcVci is 0.
Integer32
Constraints:
range: 0-15
 .1.3.6.1.4.1.11.2.14.11.15.2.49.2.2.1.3
hpnicfAtmDxiMapPvcVci
The VCI of PVC. It can't be 0 if hpnicfAtmDxiMapPvcVpi is 0.
Integer32
Constraints:
range: 0-63
 .1.3.6.1.4.1.11.2.14.11.15.2.49.2.2.1.4
hpnicfAtmDxiMapType
Pvc map type.
Enumeration
Enumerated Values:
1address
2inarp
3default
 .1.3.6.1.4.1.11.2.14.11.15.2.49.2.2.1.5
hpnicfAtmDxiMapInarpTime
The interval time of inarp request. This node describes
the interval time inarp request frame sent. If the hpnicfAtmDxiMapType
isn't inarp, this value is 0. Its unit is minute.
Integer32r/w
Constraints:
range: 0-0
range: 5-10
 .1.3.6.1.4.1.11.2.14.11.15.2.49.2.2.1.6
hpnicfAtmDxiMapBroEnable
Whether ATM-DXI map enable broadcast or not.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.11.2.14.11.15.2.49.2.2.1.7
hpnicfAtmDxiMapRowStatus
Only support 'destroy', 'createAndGo' and 'active'.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.11.2.14.11.15.2.49.2.2.1.8