HP-TUNNEL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
14

hpTunnelConfigTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.77.1.1 · 1 row entry · 4 columns
Open in standard view 
This table is used to provision for a tunnel without 
having to configure the source and destination ends of the tunnels.
hpTunnelConfigEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.77.1.1.1
A set of objects that are used to create a tunnel.
Indexes
hpTunnelID
Column Syntax OID
hpTunnelID
The tunnel number to configure a tunnel.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.11.2.14.11.5.1.77.1.1.1.1
hpTunnelIfIndex deprecated
The interface index associated with this tunnel
entry.
Since this Object is read-only, it is deprecated in favor of
hpTunnelInterfaceIndex.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.11.2.14.11.5.1.77.1.1.1.2
hpTunnelRowStatus
The status of this row, by which new entries may be
created, or old entries deleted from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.11.2.14.11.5.1.77.1.1.1.3
hpTunnelInterfaceIndex
The tunnel interface index associated with this tunnel entry.
IF-MIBInterfaceIndexr/w
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.11.2.14.11.5.1.77.1.1.1.4

hpTunnelIfTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.77.1.2 · 1 row entry · 5 columns
Open in standard view 
This table augments the tunnelIfTable
hpTunnelIfEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.77.1.2.1
A set of objects as an augment to tunnelIfTable.
Indexes
No indexes recorded
Column Syntax OID
hpTunnelIfPMTU
Enable/Disable path mtu discovery for this tunnel.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.11.2.14.11.5.1.77.1.2.1.1
hpTunnelIfNUD
Enable/Disable Neighbor Unreachability Detection for this tunnel.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.11.2.14.11.5.1.77.1.2.1.2
hpTunnelIfMTU
The size of the largest packet which can be sent/received
on the interface, specified in octets. For interfaces that
are used for transmitting network datagrams, this is the
size of the largest network datagram that ca…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.77.1.2.1.3
hpTunnelEncapsMethod
The encapsulation method used by the tunnel.
HpTunnelTyper/w
Textual Convention: HpTunnelType Enumeration
Type Values:
1unspecified
2direct4in4
3direct6in4
4direct6in4Ipsec
5direct6in6
6ipsecIpv4
7ipsecIpv6
8macinudp
 .1.3.6.1.4.1.11.2.14.11.5.1.77.1.2.1.4
hpTunnelIpsecName
Specifies the IPSEC profile name for tunnel.
This mentioned IPSEC profile can be attached with
tunnel to avail the protection for tunnel traffic
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.11.2.14.11.5.1.77.1.2.1.5

hpTunnelInetConfigTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.77.1.3 · 1 row entry · 1 columns
Open in standard view 
This table augments the tunnelInetConfigTable
hpTunnelInetConfigEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.77.1.3.1
A set of objects as an augment to tunnelInetConfigTable.
Indexes
No indexes recorded
Column Syntax OID
hpTunnelInetConfigEncapsMethod
The encapsulation method used by the tunnel.
HpTunnelTyper/w
Textual Convention: HpTunnelType Enumeration
Type Values:
1unspecified
2direct4in4
3direct6in4
4direct6in4Ipsec
5direct6in6
6ipsecIpv4
7ipsecIpv6
8macinudp
 .1.3.6.1.4.1.11.2.14.11.5.1.77.1.3.1.1

hpicfVlanTunnelMappingTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.77.1.4 · 1 row entry · 3 columns
Open in standard view 
A table that maps a VLAN to a tunnel. The tunnel to VLAN mapping                implies that tunnel will carry bidirectional traffic of a VLAN.
hpicfVlanTunnelMappingEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.77.1.4.1
An entry containing the mapping of a VLAN to a tunnel.
The VLAN-to-tunnel mapping allows all the VLAN traffic to
flow through the associated tunnel.
Indexes
hpicfVLANIndex hpicfTunnelIfIndex
Column Syntax OID
hpicfVLANIndex
This object refers to the VLANID that is mapped to a tunnel
Q-BRIDGE-MIBVlanIndex
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.11.2.14.11.5.1.77.1.4.1.1
hpicfTunnelIfIndex
This object specifies the tunnel interface index which is
mapped to a speciifc VLAN.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.11.2.14.11.5.1.77.1.4.1.2
hpicfVlanTunnelMappingRowStatus
The row status of a VLAN to tunnel mapping entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.11.2.14.11.5.1.77.1.4.1.3

hpicfUDPTunnelTypeTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.77.1.5 · 1 row entry · 1 columns
Open in standard view 
A table containing the information about the UDP tunnel types.
hpicfUDPTunnelTypeEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.77.1.5.1
An entry containing the information on a UDP tunnel type.
Indexes
No indexes recorded
Column Syntax OID
hpicfUDPTunnelType
This object is used to configure the UDP tunnel type.
A value of none(0) indicates that the tunnel is not a
UDP tunnel.
A value of remotemirror(1) indicates that the UDP tunnel
configured is a remote mirroring tun…
Enumerationr/w
Enumerated Values:
0none
1remotemirror
2vxlan
 .1.3.6.1.4.1.11.2.14.11.5.1.77.1.5.1.1