HP-PROCURVE-420-PRIVATE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
9
Rows
9
Columns
43

lineTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.37.2.1 · 1 row entry · 5 columns
Open in standard view 
Table of descriptive and status information about
configuration of each RS-232 line in this system
lineEntry entry .1.3.6.1.4.1.11.2.3.7.11.37.2.1.1
An entry in the table, containing information
about configuration in one RS232 line of the Access Point.
Indexes
lineIndex
Column Syntax OID
lineIndex mandatory
This is defined as RS-232 index.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.37.2.1.1.1
lineDataBits mandatory
This is defined as number of data bits for the RS232 interface.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.37.2.1.1.2
lineParity mandatory
This is defined as parity of the RS232 interface.
Enumeration
Enumerated Values:
1odd
2even
99none
 .1.3.6.1.4.1.11.2.3.7.11.37.2.1.1.3
lineSpeed mandatory
This is defined as the speed of the RS-232 interface.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.37.2.1.1.4
lineStopBits mandatory
This is defined as the number of stop bits for the RS-232 interface.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.37.2.1.1.5

portTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.37.3.1 · 1 row entry · 9 columns
Open in standard view 
Table of descriptive and status information about
configuration of each switch port (including expansion slot)
in this system. This table also contains information
about each trunk (similar to Cisco's EtherChannel).
portEntry entry .1.3.6.1.4.1.11.2.3.7.11.37.3.1.1
An entry in the table, containing information
about configuration in one switch port of the switch.
Indexes
portIndex
Column Syntax OID
portIndex mandatory
This is defined as ifIndex in the IF-MIB.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.37.3.1.1.1
portName mandatory
Indicates the port name. This is same as
ifAlias in the IF-MIB (RFC2863 or later).
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.11.2.3.7.11.37.3.1.1.2
portType mandatory
Indicates the port type.
Enumeration
Enumerated Values:
1other
2hundredBaseTX
3hundredBaseFX
4thousandBaseSX
5thousandBaseLX
6thousandBaseT
7thousandBaseGBIC
8thousandBaseMiniGBIC
 .1.3.6.1.4.1.11.2.3.7.11.37.3.1.1.3
portSpeedDpxCfg mandatory
Set the port speed and duplex mode as follows:
halfDuplex10(2) - 10Mbps and half duplex mode
fullDuplex10(3) - 10Mbps and full duplex mode
halfDuplex100(4) - 100Mbps and half duplex mode
fullDuplex100(5) - 100…
Enumeration
Enumerated Values:
1auto
2halfDuplex10
3fullDuplex10
4halfDuplex100
5fullDuplex100
6halfDuplex1000
7fullDuplex1000
 .1.3.6.1.4.1.11.2.3.7.11.37.3.1.1.4
portFlowCtrlCfg mandatory
(1) Flow control mechanism is enabled.
If the port type is hundredBaseTX or thousandBaseSX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism. When
the port is operating in…
Enumeration
Enumerated Values:
1enabled
2disabled
3backPressure
4dot3xFlowControl
 .1.3.6.1.4.1.11.2.3.7.11.37.3.1.1.5
portCapabilities mandatory
Port capabilities.
Enumeration
Enumerated Values:
1portCap10full
2portCap100half
3portCap100full
4portCap1000half
5portCap1000full
6reserved6
7reserved7
8reserved8
9reserved9
10reserved10
11reserved11
12reserved12
13reserved13
14portCapSym
15portCapFlowCtrl
99portCap10half
 .1.3.6.1.4.1.11.2.3.7.11.37.3.1.1.6
portAutonegotiation mandatory
Whether autonegotiation is enabled.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.11.2.3.7.11.37.3.1.1.7
portSpeedDpxStatus mandatory
The operating speed and duplex mode of the
switched port. If this index is a trunk,
the speed is the speed of its individual members.
If this index is a trunk and the result
is inconsistent among its member ports, this …
Enumeration
Enumerated Values:
1error
2halfDuplex10
3fullDuplex10
4halfDuplex100
5fullDuplex100
6halfDuplex1000
7fullDuplex1000
 .1.3.6.1.4.1.11.2.3.7.11.37.3.1.1.8
portFlowCtrlStatus mandatory
(2) BackPressure flow control machanism is used.
(3) IEEE 802.3 flow control machanism is used.
(4) Flow control mechanism is disabled.
If this index is a trunk and the result
is inconsistent among its member ports, thi…
Enumeration
Enumerated Values:
1error
2backPressure
3dot3xFlowControl
4none
 .1.3.6.1.4.1.11.2.3.7.11.37.3.1.1.9

hpdot11StationConfigTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.37.7.1 · 1 row entry · 6 columns
Open in standard view 
Table of descriptive and status information about
configuration of each radio of the AP.
hpdot11StationConfigEntry entry .1.3.6.1.4.1.11.2.3.7.11.37.7.1.1
An entry in the table, containing information
about configuration in one radio of the AP.
Indexes
hpdot11portIndex
Column Syntax OID
hpdot11portIndex mandatory
Radio index of the AP.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.37.7.1.1.1
hpdot11DesiredSSID mandatory
This attribute reflects the Service Set ID used
in the DesiredSSID parameter of the most recent
MLME_Scan.request. This value may be modified
by an external management entity and used by the
local SME to make decisions …
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.11.2.3.7.11.37.7.1.1.2
hpdot11BeaconPeriod mandatory
This attribute shall specify the number of ms that a
station shall use for scheduling Beacon transmissions.
This value is transmitted in Beacon and Probe Response
frames.
Integer32r/w
Constraints:
range: 20-1000
 .1.3.6.1.4.1.11.2.3.7.11.37.7.1.1.3
hpdot11DTIMPeriod mandatory
This attribute shall specify the number of beacon
intervals that shall elapse between transmission of
Beacons frames containing a TIM element whose DTIM
Count field is 0. This value is transmitted in
the DTIM Period fie…
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.11.2.3.7.11.37.7.1.1.4
hpdot11OperationalRateSet mandatory
This attribute shall specify the set of data rates
at which the station may transmit data. Each octet
contains a value representing a rate. Each rate
shall be within the range from 2 to 127,
corresponding to data rates …
Integer32r/w
Constraints:
range: 1-108
 .1.3.6.1.4.1.11.2.3.7.11.37.7.1.1.5
hpdot11AuthenticationAlgorithm mandatory
This attribute shall be a set of all the authentication
algorithms supported by the STAs. The following are the
default values and the associated algorithm.
Value = 1: Open System
Value = 2: Shared Key
Enumerationr/w
Enumerated Values:
1openSystem
2sharedKey
 .1.3.6.1.4.1.11.2.3.7.11.37.7.1.1.6

hpdot11PrivacyTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.37.7.2 · 1 row entry · 4 columns
Open in standard view 
Table of descriptive and status information about
configuration of each radio of the AP.
hpdot11PrivacyEntry entry .1.3.6.1.4.1.11.2.3.7.11.37.7.2.1
An entry in the table, containing information
about configuration in one radio of the AP.
Indexes
hpdot11PrivacyportIndex
Column Syntax OID
hpdot11PrivacyportIndex mandatory
Radio index of the AP.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.37.7.2.1.1
hpdot11PrivacyInvoked mandatory
When this attribute is true, it shall indicate that the IEEE
802.11 WEP mechanism is used for transmitting frames of type
Data. The default value of this attribute shall be false.
Enumerationr/w
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.11.2.3.7.11.37.7.2.1.2
hpdot11WEPDefaultKeyID mandatory
This attribute shall indicate the use of the first,
second, or third element of the WEPDefaultKeys
array when set to values of zero, one, or two(the
fourth are reserved for dynamic key). The
default value of this attri…
Integer32r/w
Constraints:
range: 0-3
 .1.3.6.1.4.1.11.2.3.7.11.37.7.2.1.3
hpdot11WEPKeyMappingLength mandatory
The maximum number of tuples that dot11WEPKeyMappings can hold.
Integer32r/w
Constraints:
range: 10-2147483647
 .1.3.6.1.4.1.11.2.3.7.11.37.7.2.1.4

hpdot11OperationTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.37.7.3.1 · 1 row entry · 3 columns
Open in standard view 
Table of descriptive and status information about
configuration of each radio of the AP.
hpdot11OperationEntry entry .1.3.6.1.4.1.11.2.3.7.11.37.7.3.1.1
An entry in the table, containing information
about configuration in one radio of the AP.
Indexes
hpdot11OperationIndex
Column Syntax OID
hpdot11OperationIndex mandatory
Radio index of the AP.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.37.7.3.1.1.1
hpdot11RTSThreshold mandatory
This attribute shall indicate the number of octets in an MPDU,
below which an RTS/CTS handshake shall not be performed. An
RTS/CTS handshake shall be performed at the beginning of any
frame exchange sequence where the M…
Integer32r/w
Constraints:
range: 0-2347
 .1.3.6.1.4.1.11.2.3.7.11.37.7.3.1.1.2
hpdot11FragmentationThreshold mandatory
This attribute shall specify the mandatory maximum size, in
octets, of the MPDU that may be delivered to the PHY. An MSDU
shall be broken into fragments if its size exceeds the value
of this attribute after adding MAC h…
Integer32r/w
Constraints:
range: 256-2346
 .1.3.6.1.4.1.11.2.3.7.11.37.7.3.1.1.3

hpdot11PhyOperationTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.37.7.4.1 · 1 row entry · 4 columns
Open in standard view 
Table of descriptive and status information about
configuration of each radio of the AP.
hpdot11PhyOperationEntry entry .1.3.6.1.4.1.11.2.3.7.11.37.7.4.1.1
An entry in the table, containing information
about configuration in one radio of the AP.
Indexes
hpdot11Index
Column Syntax OID
hpdot11Index mandatory
Radio index of the AP.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.37.7.4.1.1.1
hpdot11CurrentChannel mandatory
The current operating frequency channel of the network
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.37.7.4.1.1.2
hpdot11TurboModeEnabled mandatory
This attribute, when true, shall indicate that the
propietory turbo mode option is enabled. The default value of
this attribute shall be false.
Enumeration
Enumerated Values:
1on
2off
99none
 .1.3.6.1.4.1.11.2.3.7.11.37.7.4.1.1.3
hpdot11PreambleLength mandatory
This attribute determines whether or not a short or a long
preamble is used to delineate 802.11 frames.
Enumerationr/w
Enumerated Values:
1short
2long
 .1.3.6.1.4.1.11.2.3.7.11.37.7.4.1.1.4

hpdot11AuthenticationServerTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.37.7.6 · 1 row entry · 6 columns
Open in standard view 
Table of descriptive and status information about
configuration of each authentication server.
hpdot11AuthenticationServerEntry entry .1.3.6.1.4.1.11.2.3.7.11.37.7.6.1
An entry in the table, containing information
about configuration in one radio of the AP.
Indexes
hpdot11serverIndex
Column Syntax OID
hpdot11serverIndex mandatory
Radio index of the AP.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.37.7.6.1.1
hpdot11AuthenticationServer mandatory
This values indicates the IP address of the
authentication server.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.3.7.11.37.7.6.1.2
hpdot11AuthenticationPort mandatory
This values indicates the UDP Port used by the primary
authentication server.
Integer32r/w
Constraints:
range: 1024-65535
 .1.3.6.1.4.1.11.2.3.7.11.37.7.6.1.3
hpdot11AuthenticationKey mandatory
This values indicates the shared key used by the
authentication server.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.11.2.3.7.11.37.7.6.1.4
hpdot11AuthenticationRetransmit mandatory
This values indicates the retransmit timer length used by the
authentication server.
Integer32r/w
Constraints:
range: 1-30
 .1.3.6.1.4.1.11.2.3.7.11.37.7.6.1.5
hpdot11AuthenticationTimeout mandatory
This values indicates the Timeout value(sec) used by the
authentication server.
Integer32r/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.11.2.3.7.11.37.7.6.1.6

hpdot11FilterTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.37.7.7 · 1 row entry · 3 columns
Open in standard view 
Table of status information about
each configured MAC Address Filtering Entry.
hpdot11FilterEntry entry .1.3.6.1.4.1.11.2.3.7.11.37.7.7.1
An entry in the table, containing information
about configuration in one radio of the AP.
Indexes
hpdot11FilterIndex
Column Syntax OID
hpdot11FilterIndex mandatory
Filter index.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.37.7.7.1.1
hpdot11FilterAddress mandatory
This values indicates the MAC address of the
filter entry.
PhysAddressr/w
Textual Convention: PhysAddress OctetString
 .1.3.6.1.4.1.11.2.3.7.11.37.7.7.1.2
hpdot11FilterStatus mandatory
This values indicates the Status of the filter entry.
Ifallowed, the client is allowed access to the network.
If disallowed, the no frames will be forwarded to the
network from the client.
Enumerationr/w
Enumerated Values:
30allowed
31denied
 .1.3.6.1.4.1.11.2.3.7.11.37.7.7.1.3

hpdot11WEPDefaultKeys11gTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.37.7.8.1.1 · 1 row entry · 3 columns
Open in standard view 
Conceptual table for WEP default keys.  This table shall
contain the four WEP default secret key values
corresponding to the four possible KeyID values.  The WEP
default secret keys are logically WRITE-ONLY.  Attempts to
read the entries in this table shall return unsuccessful
status and values of null or zero.  The default value of
each WEP default key shall be null.
hpdot11WEPDefaultKeys11gEntry entry .1.3.6.1.4.1.11.2.3.7.11.37.7.8.1.1.1
An Entry (conceptual row) in the WEP Default Keys Table.

ifIndex - Each 802.11 interface is represented by an
ifEntry. Interface tables in this MIB module are indexed
by ifIndex.
Indexes
dot11WEPDefaultKey11gLength
Column Syntax OID
hpdot11WEPDefaultKey11gLength mandatory
A 40(64)-bits [5 octets WEP], 104(128)-bits [13 octets] or 128(152)-bits [16 octets]
Enumerationr/w
Enumerated Values:
64sixtyFour
128oneHundredTwentyEight
152oneHundredFiftyTwo
 .1.3.6.1.4.1.11.2.3.7.11.37.7.8.1.1.1.1
hpdot11WEPDefaultKey11gIndex mandatory
The auxiliary variable used to identify instances
of the columnar objects in the WEP Default Keys Table.
The value of this variable is equal to the WEPDefaultKeyID + 1
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.11.2.3.7.11.37.7.8.1.1.1.2
hpdot11WEPDefaultKey11gValue mandatory
A 40(64)-bits [5 octets WEP] or 104(128)-bits [13 octets]
default secret key value.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.11.2.3.7.11.37.7.8.1.1.1.3