HP-ICF-RIPNG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
11

hpicfRipngIfConfTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.113.1.2 · 1 row entry · 7 columns
Open in standard view 
A list of the interfaces that require separate
configuration in RIPng.
hpicfRipngIfConfEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.113.1.2.1
A single routing domain in a single subnet.
Indexes
hpicfRipngIfConfIndex hpicfRipngIfConfInstId
Column Syntax OID
hpicfRipngIfConfIndex
The interface index of this RIPng interface.
It corresponds to the interface index of the
IPv6 interface on which RIPng is configured.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.11.2.14.11.5.1.113.1.2.1.1
hpicfRipngIfConfInstId
This will allow multiple instances of RIPng to
run on the same device. Currently, only one instance
is supported.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.11.2.14.11.5.1.113.1.2.1.2
hpicfRipngIfConfMetric
The RIPng metric for this interface.
Integer32r/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.11.2.14.11.5.1.113.1.2.1.3
hpicfRipngIfConfStatus
The row status variable for the hpicfRipngIfConf table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.11.2.14.11.5.1.113.1.2.1.4
hpicfRipngIfConfSrcAddressType
The address type for hpicfRipngIfConfSrcAddress.
Only IPv6 addresses without a zone index value are accepted.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.14.11.5.1.113.1.2.1.5
hpicfRipngIfConfSrcAddress
The link-local IPv6 address that this system will use as a source
address on this interface.
OctetString
Constraints:
range: 0-0
range: 16-16
 .1.3.6.1.4.1.11.2.14.11.5.1.113.1.2.1.6
hpicfRipngIfConfDoPoisonReverse
A flag indicating whether the router should perform poison
reverse on this interface.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.5.1.113.1.2.1.7

hpicfRipngPeerTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.113.1.3 · 1 row entry · 4 columns
Open in standard view 
A list of RIPng peers.
hpicfRipngPeerEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.113.1.3.1
Information regarding a single routing peer.
Indexes
hpicfRipngPeerAddressType hpicfRipngPeerAddress
Column Syntax OID
hpicfRipngPeerAddressType
The address type for hpicfRipngPeerAddress.
Only IPv6 addresses without a zone index are expected.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.14.11.5.1.113.1.3.1.1
hpicfRipngPeerAddress
The IPv6 address that the peer is using as its source
address. On an unnumbered link, this IPv6 address might
not be a member of any subnet on the system.
OctetString
Constraints:
range: 0-0
range: 16-16
 .1.3.6.1.4.1.11.2.14.11.5.1.113.1.3.1.2
hpicfRipngPeerLastUpdate
The value of sysUpTime when the most recent
RIPng update was received from this peer.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.113.1.3.1.3
hpicfRipngPeerRcvBadPackets
The number of RIPng invalid response packets that
are received from this peer.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.113.1.3.1.4