HP-ICF-OSPF Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
19
Rows
19
Columns
78

hpicfOspfRedistTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.2 · 1 row entry · 2 columns
Open in standard view 
Table for configuring route redistribution
into OSPF.
hpicfOspfRedistEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.14.1.2.1
An entry in the table for configuring route
redistribution into OSPF from a single source
protocol. Entries in this table are not
created dynamically. There will be a single
entry for each supported source protocol.
Indexes
hpicfOspfRedistSrcProto
Column Syntax OID
hpicfOspfRedistSrcProto
Source protocol to redistribute routes from.
IANA-RTPROTO-MIBIANAipRouteProtocol
Textual Convention: IANA-RTPROTO-MIBIANAipRouteProtocol Enumeration
Type Values:
1other
2local
3netmgmt
4icmp
5egp
6ggp
7hello
8rip
9isIs
10esIs
11ciscoIgrp
12bbnSpfIgp
13ospf
14bgp
15idpr
16ciscoEigrp
17dvmrp
18rpl
19dhcp
20ttdp
 .1.3.6.1.4.1.11.2.14.11.5.1.14.1.2.1.1
hpicfOspfRedistEnabled
A flag indicating whether OSPF should
redistribute routes from this source protocol.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.5.1.14.1.2.1.2

hpicfOspfRedistRestrictTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.3 · 1 row entry · 3 columns
Open in standard view 
A table of route prefixes for filtering out
routes that OSPF should not redistribute.  Any
route that is contained by a range in this table
(in other words, has a longer mask than that
specified by hpicfOspfRedistRestrictMask and
where the route destination ANDed with the
hpicfOspfRedistRestrictMask is equal to
hpicfOspfRedistRestrictAddr) will not be
redistributed as an AS-external LSA by OSPF.
hpicfOspfRedistRestrictEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.14.1.3.1
A single entry in the table. Any route,
regardless of source protocol which is
contained within the specified range will not
be redistributed into OSPF. Entries in this
table are created dynamically using the
hpicfOsp…
Indexes
hpicfOspfRedistRestrictAddr hpicfOspfRedistRestrictMask
Column Syntax OID
hpicfOspfRedistRestrictAddr
The IP address of the range of route entries
to exclude from redistribution into OSPF.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.14.11.5.1.14.1.3.1.1
hpicfOspfRedistRestrictMask
The mask for the range of route entries to
exclude from redistribution into OSPF.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.14.11.5.1.14.1.3.1.2
hpicfOspfRedistRestrictStatus
The status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.11.2.14.11.5.1.14.1.3.1.3

hpicfOspfLogTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.4 · 1 row entry · 2 columns
Open in standard view 
A table containing the configuration parameters
pertaining for OSPF routing protocol logging facility.
hpicfOspfLogEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.14.1.4.1
The configuration parameters pertaining to a OSPF
log entry. Each entry contains information about
the action and severity for a particular logType, and
for each version of OSPF.
Indexes
hpicfOspfLogType
Column Syntax OID
hpicfOspfLogType
The type of log for every kind of
event in OSPF routing protocol .
HpicfOspfLogType
Textual Convention: HpicfOspfLogType Enumeration
Type Values:
1neighborAdjacencyChanges
2other
 .1.3.6.1.4.1.11.2.14.11.5.1.14.1.4.1.1
hpicfOspfLogAction
The action, if any, that was taken by the agent
when the event represented by hpicfOspfLogType.
When enabled, brief information of the event is logged
and if it is set to enabledWithDetail, provides more information,
li…
HpicfOspfLogActionr/w
Textual Convention: HpicfOspfLogAction Enumeration
Type Values:
1enabled
2disabled
3enabledWithDetail
 .1.3.6.1.4.1.11.2.14.11.5.1.14.1.4.1.2

hpicfOspfNbrTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.5 · 1 row entry · 7 columns
Open in standard view 
HP proprietary extension to ospfNbrTable to support
read-only elements for reading neighbor adjacency length,
designated router, backup designated router, Area ID and the
and time-to-expiry for an OSPF neighbor
hpicfOspfNbrEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.14.1.5.1
Each entry is extension of ospfNbr Entry and gives more
information for OSPF neighbors
Indexes
No indexes recorded
Column Syntax OID
hpicfOspfNbrUpTime
This object specifies the time duration for which the
adjacency with the particular neighbor is active. This should be
a monotonically increasing timer for the duration the adjacency
is active. This counter should be r…
secondsOSPF-MIBPositiveInteger
Textual Convention: OSPF-MIBPositiveInteger Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.11.2.14.11.5.1.14.1.5.1.1
hpicfOspfNbrTimeToExpiry
This object specifies the time remaining for the dead timer for the
particular neighbor to expire. This counter thus specifies the time in
seconds left for an adjacency to be brought down in case no Hello packet
is rece…
OSPF-MIBPositiveInteger
Textual Convention: OSPF-MIBPositiveInteger Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.11.2.14.11.5.1.14.1.5.1.2
hpicfOspfNbrDesignatedRouter
The IP address of the designated router.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.14.11.5.1.14.1.5.1.3
hpicfOspfNbrBackupDesignatedRouter
The IP address of the backup designated
router.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.14.11.5.1.14.1.5.1.4
hpicfOspfNbrAreaId
A 32-bit integer uniquely identifying an area.
Area ID 0.0.0.0 is used for the OSPF backbone.
OSPF-MIBAreaID
Textual Convention: OSPF-MIBAreaID OctetString
 .1.3.6.1.4.1.11.2.14.11.5.1.14.1.5.1.5
hpicfOspfNbrInterfaceName
The ifName value of this OSPF interface.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.5.1.14.1.5.1.6
hpicfOspfNbrBfdState
The ifName value of this OSPF interface.
Enumeration
Enumerated Values:
0notConfigured
1created
2up
3down
 .1.3.6.1.4.1.11.2.14.11.5.1.14.1.5.1.7

hpicfOspfAreaAggregateTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.6 · 1 row entry · 2 columns
Open in standard view 
HP proprietary extensions to ospfAreaAggregateTable
hpicfOspfAreaAggregateEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.14.1.6.1
Each entry is extension of ospfAreaAggregateEntry
Indexes
No indexes recorded
Column Syntax OID
hpicfOspfAreaAggregateCost
Manually configured cost of the summary advertisement.
A value of 0 indicates that the cost defined and
calculated by the OSPF standard should be used.
Valid costs range from 1-16777215
OSPF-MIBBigMetricr/w
Textual Convention: OSPF-MIBBigMetric Integer32
Type Constraints:
range: 0..16777215
 .1.3.6.1.4.1.11.2.14.11.5.1.14.1.6.1.1
hpicfOspfAreaAggregateType
Configure whether external metric and OSPF metric
are comparable.
If 'metric-type' is specified as 'type1', the
external metric and the OSPF metric are considered
comparable. 'type2' implies non-comparable metric
Enumerationr/w
Enumerated Values:
1type1
2type2
 .1.3.6.1.4.1.11.2.14.11.5.1.14.1.6.1.2

hpicfOspfDistributeListTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.7 · 1 row entry · 3 columns
Open in standard view 
A table of route prefixes for filtering out
intra-area routes that OSPF should not install into
local routing table.  Any route that is contained by
a range in this table (in other words, has a longer mask
than that specified by hpicfOspfDistributeListMask and
where the route destination ANDed with the
hpicfOspfDistributeListMask is equal to
hpicfOspfDistributeListAddr) will not be
installed into FIB by OSPF.
hpicfOspfDistributeListEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.14.1.7.1
A single entry in the table. Any intra-area route,
which is contained within the specified range will not
be installed into FIB by OSPF. Entries in this
table are created dynamically using the
hpicfOspfDistributeListSt…
Indexes
hpicfOspfDistributeListAddr hpicfOspfDistributeListMask
Column Syntax OID
hpicfOspfDistributeListAddr
The IP address of the range of route entries
to exclude from installing into FIB by OSPF.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.14.11.5.1.14.1.7.1.1
hpicfOspfDistributeListMask
The mask for the range of route entries to
exclude from installing into FIB by OSPF.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.14.11.5.1.14.1.7.1.2
hpicfOspfDistributeListStatus
The status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.11.2.14.11.5.1.14.1.7.1.3

hpicfOspfIfTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.14.4 · 1 row entry · 3 columns
Open in standard view 
Extensions to the table that contains OSPF Interface specific
information.
hpicfOspfIfEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.14.4.1
A list of extensions to the information maintained
for an OSPF interface.
Indexes
No indexes recorded
Column Syntax OID
hpicfOspfIfPassive
The passive state configuration of the OSPF interface.
In the passive mode no OSPF protocol messages are exchanged on
this interface.

true (1) - The interface is configured to work in Passive mode
fa…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.5.1.14.4.1.1
hpicfOspfIfNbrCount
This object specifies the number of OSPFv3 neighbors
present in this interface. This counter should be
incremented when a new neighbor is added in the network in
which this interface is present.
It should be decre…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.14.4.1.2
hpicfOspfIfBfdEnbl
param to enable BFD under OSPF
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.5.1.14.4.1.3

hpicfOspfIfStatsTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.14.5 · 1 row entry · 10 columns
Open in standard view 
Table that contains OSPF Interface traffic specific
information.
hpicfOspfIfStatsEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.14.5.1
A list of extensions to the information
maintained for an OSPF interface.
Indexes
OSPF-MIBospfIfIpAddress OSPF-MIBospfAddressLessIf
Column Syntax OID
hpicfOspfSentHelloPkt
The number of OSPF Hello packets sent on the
interface. This number is incremented each time an
OSPF Hello packet is sent out of an OSPF enabled
interface.

Discontinuities in the value of this counter …
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.14.5.1.1
hpicfOspfSentDDPkt
The number of Database Description packets sent on
the interface. This number is incremented each time
an OSPF DD packet is sent out of an OSPF enabled
interface.

Discontinuities in the value of this …
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.14.5.1.2
hpicfOspfSentLSRPkt
The number of Link State Request packet sent on the
interface. This number is incremented each time an
OSPF LSR packet is sent out of OSPF enabled
interface.

Discontinuities in the value of this counter …
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.14.5.1.3
hpicfOspfSentLSUPkt
The number of Link State Update packet sent on the
interface. This number is incremented each time an
OSPF LSU packet is sent out of an OSPF enabled
interface.

Discontinuities in the value of this count…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.14.5.1.4
hpicfOspfSentLSAPkt
The number of Link State Ack packet sent on the
interface. This number is incremented each time an
OSPF LSA packet is sent out of an OSPF enabled
interface.

Discontinuities in the value of this counter
…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.14.5.1.5
hpicfOspfRcvdHelloPkt
The number of Hello packets received on the interface.
This number is incremented each time a hello
packet is received on OSPF enabled interface.

Discontinuities in the value of this counter
can occur at…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.14.5.1.6
hpicfOspfRcvdDDPkt
The number of Database Description packets received
on the interface. This number is incremented each
time a OSPF DD packet is received on OSPF enabled
interface.

Discontinuities in the value of this c…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.14.5.1.7
hpicfOspfRcvdLSRPkt
The number of Link State Request packets received
on the interface. This number is incremented each
time a OSPF LSR packet is received on OSPF enabled
interface.

Discontinuities in the value of this co…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.14.5.1.8
hpicfOspfRcvdLSUPkt
The number of Link State Update packets received
on the interface. This number is incremented each
time a OSPF LSU packet is received on OSPF enabled
interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.14.5.1.9
hpicfOspfRcvdLSAPkt
The number of Link State Ack packets received
on the interface. This number is incremented each
time a OSPF LSA packet is received on OSPF enabled
interface.

Discontinuities in the value of this counte…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.14.5.1.10

hpicfOspfIfErrorTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.14.6 · 1 row entry · 2 columns
Open in standard view 
Table that contains OSPF Interface traffic specific
information.
hpicfOspfIfErrorEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.14.6.1
A list of extensions to the information
maintained for an OSPF interface.
Indexes
OSPF-MIBospfIfIpAddress OSPF-MIBospfAddressLessIf hpicfOspfIfErrorType
Column Syntax OID
hpicfOspfIfErrorType
The hpicfOspfIfErrorType refers to the type of errors
in the OSPF packet received on any OSPF enabled
interface. Errors could be Invalid RouterID/ AreaID
Checksum error, OutOfbound Error ...
Integer32
Constraints:
range: -2147483648-2147483647
 .1.3.6.1.4.1.11.2.14.11.5.1.14.6.1.1
hpicfOspfIfErrorCount
The hpicfOspfErrorCount is count of each type
error packet received on an OSPF interface.

Discontinuities in the value of this counter
can occur at re-initialization of the management
system. The count…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.14.6.1.2

hpicfOspfIfClearStatsTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.14.7 · 1 row entry · 1 columns
Open in standard view 
A list used to clear statistics information
maintained for an OSPF interface.
hpicfOspfIfClearStatsEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.14.7.1
A list used to clear statistics information
maintained for an OSPF interface.
Indexes
OSPF-MIBospfIfIpAddress OSPF-MIBospfAddressLessIf
Column Syntax OID
hpicfOspfClearCounters
Read of this will always be false, When this variable is set
to true for a given Ipaddress interface, corresponding
interface counters will be cleared.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.5.1.14.7.1.1

hpicfOspfSpfTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.14.8 · 1 row entry · 3 columns
Open in standard view 
Table that contains OSPF SPF information.
hpicfOspfSpfEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.14.8.1
A list of extensions to the information
maintained for OSPF SPF runs.
Indexes
hpicfOspfSpfInstance
Column Syntax OID
hpicfOspfSpfInstance
The hpicfospfSpfInstance refers to the instance of SPF
Shortest Path First ran for an OSPF instance.
Integer32
Constraints:
range: -2147483648-2147483647
 .1.3.6.1.4.1.11.2.14.11.5.1.14.8.1.1
hpicfOspfSpfReason
The hpicfOspfSpfReason refers to the reason for
scheduling an SPF run. Reasons could be OSPF init,
adding/deleting interface, linkStateUpdate received..
Only last ten SPF run's reasons will be saved.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.5.1.14.8.1.2
hpicfOspfSpfTime
The hpicfOspfSpfTime refers to the time at which
SPF run is scheduled. Reasons could be OSPF init,
adding/deleting interface, linkStateUpdate received..
Only last ten SPF run's reasons will be saved.
secondsSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.5.1.14.8.1.3

hpicfOspfReqTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.14.9 · 1 row entry · 6 columns
Open in standard view 
Request List table that contains OSPF 
Specific interface information.
hpicfOspfReqEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.14.9.1
A Request List entries that contain fields of
link state advertisement.
Indexes
OSPF-MIBospfIfIpAddress OSPF-MIBospfAddressLessIf
Column Syntax OID
hpicfOspfReqType
The type of the Request List's link state advertisement.
Each link state type has a separate advertisement
format.
Enumeration
Enumerated Values:
1routerLink
2networkLink
3summaryLink
4asSummaryLink
5asExternalLink
6multicastLink
7nssaExternalLink
10areaOpaqueLink
 .1.3.6.1.4.1.11.2.14.11.5.1.14.9.1.1
hpicfOspfReqLsid
The Request List's Link State ID is an LS Type Specific field
containing either a Router ID or an IP address;
it identifies the piece of the routing domain
that is being described by the advertisement.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.14.11.5.1.14.9.1.2
hpicfOspfReqRouterId
The 32-bit number that uniquely identifies the
originating router in the Autonomous System.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.14.11.5.1.14.9.1.3
hpicfOspfReqSequence
The Request List's sequence number field is a signed 32-bit
integer. It starts with the value '80000001'h,
or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.
Thus, a typical sequence number will be very negative.
It is…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.5.1.14.9.1.4
hpicfOspfReqAge
This Request list's field is the age of the link state advertisement
in seconds.
secondsSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.5.1.14.9.1.5
hpicfOspfReqChecksum
This Request list's field is the checksum of the complete contents of
the advertisement, excepting the age field. The age field
is excepted so that an advertisement's age can be
incremented without updating the checksu…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.5.1.14.9.1.6

hpicfOspfRetransTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.14.10 · 1 row entry · 6 columns
Open in standard view 
Retransmission List table that contains
Ospf Interface Specific information.
hpicfOspfRetransEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.14.10.1
Retransmission list entry that is maintained
for an OSPF Interface.
Indexes
OSPF-MIBospfIfIpAddress OSPF-MIBospfAddressLessIf
Column Syntax OID
hpicfOspfRetransType
The Retransmission List LSA type.
Each link state type has a separate advertisement
format.
Enumeration
Enumerated Values:
1routerLink
2networkLink
3summaryLink
4asSummaryLink
5asExternalLink
6multicastLink
7nssaExternalLink
10areaOpaqueLink
 .1.3.6.1.4.1.11.2.14.11.5.1.14.10.1.1
hpicfOspfRetransLsid
The Retransmission List Link State ID is an LS Type Specific field
containing either a Router ID or an IP address;
it identifies the piece of the routing domain
that is being described by the advertisement.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.14.11.5.1.14.10.1.2
hpicfOspfRetransRouterId
The 32-bit number that uniquely identifies the
originating Retransmission List router in the Autonomous System.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.14.11.5.1.14.10.1.3
hpicfOspfRetransSequence
The Retransmission List sequence number field is a signed 32-bit
integer. It starts with the value '80000001'h,
or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.
Thus, a typical sequence number will be very negative.
…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.5.1.14.10.1.4
hpicfOspfRetransAge
This Retransmission List field is the age of the link state
advertisement in seconds.
secondsSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.5.1.14.10.1.5
hpicfOspfRetransChecksum
This Retransmission field is the checksum of the complete contents of
the advertisement, excepting the age field. The age field
is excepted so that an advertisement's age can be
incremented without updating the checksu…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.5.1.14.10.1.6

hpicfOspfFloodTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.14.11 · 1 row entry · 6 columns
Open in standard view 
Flood list table that contains
Ospf Interface Specific information
hpicfOspfFloodEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.14.11.1
A Flood list information maintained
for an OSPF Interface
Indexes
OSPF-MIBospfIfIpAddress OSPF-MIBospfAddressLessIf
Column Syntax OID
hpicfOspfFloodType
The flood list LSA type .Each link state type
has a separate advertisement format.
Enumeration
Enumerated Values:
1routerLink
2networkLink
3summaryLink
4asSummaryLink
5asExternalLink
6multicastLink
7nssaExternalLink
10areaOpaqueLink
 .1.3.6.1.4.1.11.2.14.11.5.1.14.11.1.1
hpicfOspfFloodLsid
The flood list Link State ID is an LS Type Specific field
containing either a Router ID or an IP address;
it identifies the piece of the routing domain
that is being described by the advertisement.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.14.11.5.1.14.11.1.2
hpicfOspfFloodRouterId
The 32-bit number that uniquely identifies the
originating flood list router in the Autonomous System.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.14.11.5.1.14.11.1.3
hpicfOspfFloodSequence
The flood list sequence number field is a signed 32-bit
integer. It starts with the value '80000001'h,
or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.
Thus, a typical sequence number will be very negative.
It is use…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.5.1.14.11.1.4
hpicfOspfFloodAge
This flood list field is the age of the link state advertisement
in seconds.
secondsSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.5.1.14.11.1.5
hpicfOspfFloodChecksum
This flood list field is the checksum of the complete contents of
the advertisement, excepting the age field. The age field
is excepted so that an advertisement's age can be
incremented without updating the checksum. …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.5.1.14.11.1.6

hpicfOspfAreaLsdbTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.14.14 · 1 row entry · 9 columns
Open in standard view 
The OSPF Process's Area-Scope LSDB. 
The LSDB contains the Area-Scope Link State 
Advertisements from throughout the area that the 
device is attached to.
hpicfOspfAreaLsdbEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.14.14.1
A single Area-Scope Link State Advertisement.
Indexes
No indexes recorded
Column Syntax OID
hpicfOspfAreaLsdbRtrCapBits
This field is valid if the LSA is a Router LSA. It uniquely
identifies the router type of the router in the Area.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.14.14.1.1
hpicfOspfAreaLsdbOptions
The Options field enables OSPF routers to support
(or not support) optional capabilities, and to communicate
their capability level to other OSPF routers. This field is
valid for each type of LSA.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.14.14.1.2
hpicfOspfAreaLsdbMetric
This field is valid if the LSA is a Router LSA, a
Summary LSA, AS Summary LSA or a NSSA LSA.
This field indicates the cost involved in using the interface
or route.
OSPF-MIBMetric
Textual Convention: OSPF-MIBMetric Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.11.2.14.11.5.1.14.14.1.3
hpicfOspfAreaLsdbAddrPrefix
The Prefix the Address.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.14.14.1.4
hpicfOspfAreaLsdbFwdingAddress
This field is valid if the LSA is a NSSA LSA. This field is
present only if the 'F' Bit is set in the EFT flags field
and if included, the data traffic for the advertised
destination will be forwarded to this address.
HpicfOspfRouterIdTc
Textual Convention: HpicfOspfRouterIdTc Unsigned32
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.14.14.1.5
hpicfOspfAreaLsdbExtRouteTags
This field is valid if the LSA is a NSSA LSA. This field is
present only if the 'T' Bit is set in the EFT flags field.
A 32-bit field which may be used to communicate additional
information between AS boundary routers.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.14.14.1.6
hpicfOspfTOS
The 32-bit identifier for the TOS specific information
of the LSA.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.14.14.1.7
hpicfOspfLsdbRouterLinks
This field is valid if the LSA is Router LSA. It holds the
information of Number of links in the router LSA.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.14.14.1.8
hpicfOspfLsdbBitE
The 32-bit identifier for the Metric specific information
of the LSA.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.14.14.1.9

hpicfOspfRouterLSATable

table
.1.3.6.1.4.1.11.2.14.11.5.1.14.15 · 1 row entry · 5 columns
Open in standard view 
This table having Area scope is a dependent-expansion table
for the Router LSA entry in the Area LSDB table. It
represents the list of per interface details advertised
in a Router LSA.
hpicfOspfRouterLSAEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.14.15.1
A single Area-Scope Link State Advertisement.
Indexes
OSPF-MIBospfLsdbAreaId OSPF-MIBospfLsdbType OSPF-MIBospfLsdbLsid OSPF-MIBospfLsdbRouterId hpicfOspfRouterLSANbrRtrId
Column Syntax OID
hpicfOspfRouterLSANbrRtrId
The router id of the router which is connected over
the interface Id.
HpicfOspfRouterIdTc
Textual Convention: HpicfOspfRouterIdTc Unsigned32
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.14.15.1.1
hpicfOspfRouterLSAIfType
The 32-bit identifier of the Area from which the
LSA was received.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.14.15.1.2
hpicfOspfRouterLSAMetric
This field indicates the cost involved in using the
interface or route.
OSPF-MIBMetric
Textual Convention: OSPF-MIBMetric Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.11.2.14.11.5.1.14.15.1.3
hpicfOspfRouterLSAIfId
The interface Id of the router that connects
to the other router.
HpicfOspfRouterIdTc
Textual Convention: HpicfOspfRouterIdTc Unsigned32
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.14.15.1.4
hpicfOspfRouterLSATOSMetric
This field indicates the cost involved in using the interface
or route specific to TOS.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.14.15.1.5

hpicfOspfNetworkLSATable

table
.1.3.6.1.4.1.11.2.14.11.5.1.14.16 · 1 row entry · 2 columns
Open in standard view 
This table having Area scope is a dependent-expansion table
for the Network LSA entry in the Area LSDB table. This table
represents the list of routers advertised in a Network LSA.
hpicfOspfNetworkLSAEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.14.16.1
A single Area-Scope Link State Advertisement.
Indexes
OSPF-MIBospfLsdbAreaId OSPF-MIBospfLsdbType OSPF-MIBospfLsdbLsid OSPF-MIBospfLsdbRouterId hpicfOspfNetworkLSASeqNum
Column Syntax OID
hpicfOspfNetworkLSASeqNum
The 32-bit sequence number identifying the attached
router-ids.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.14.16.1.1
hpicfOspfNetworkLSAAttachedRouter
The 32-bit Router identifier of the attached Router.
HpicfOspfRouterIdTc
Textual Convention: HpicfOspfRouterIdTc Unsigned32
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.14.16.1.2

hpicfOspfExtLsdbTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.14.17 · 1 row entry · 5 columns
Open in standard view 
The OSPFv3 Process's AS-Scope Link State Database 
(LSDB). The LSDB contains the AS-Scope Link State 
Advertisements from throughout the areas that the 
device is attached to.
hpicfOspfExtLsdbEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.14.17.1
A single AS-Scope Link State Advertisement.
Indexes
No indexes recorded
Column Syntax OID
hpicfOspfExtLsdbMetric
The cost associated with this route.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.14.17.1.1
hpicfOspfExtLsdbOptions
The Options field enables OSPF routers to support
(or not support) optional capabilities, and to communicate
their capability level to other OSPF routers.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.14.17.1.2
hpicfOspfExtLsdbFwdingAddress
If included, Data traffic for the advertised destination
will be forwarded to this address.
HpicfOspfRouterIdTc
Textual Convention: HpicfOspfRouterIdTc Unsigned32
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.14.17.1.3
hpicfOspfExtLsdbExtRouteTags
The 32-bit Router Tags for the advertised Route.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.14.17.1.4
hpicfOspfExtLsdbBitE
The type of External metric. If bit E is set, the metric
specified is Type 2 external metric.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.14.17.1.5

hpicfOspfIfMetricTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.14.18.1 · 1 row entry · 1 columns
Open in standard view 
Extensions to the table that contains OSPF Metric specific
information.
hpicfOspfIfMetricEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.14.18.1.1
A list of extensions to the information maintained
for an OSPF interface.
Indexes
No indexes recorded
Column Syntax OID
hpicfOspfIfFlagValue
This flag is defined to know the type of OSPF cost
configuration..
-1 : Default configuration.
0 : Manual configuration.
1 : Global configuration (value taken from global).
Integer32r/w
Constraints:
range: -1-1
 .1.3.6.1.4.1.11.2.14.11.5.1.14.18.1.1.1