HP-ICF-BRIDGE Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
8
Rows
8
Columns
25

hpicfBridgeGvrpPortTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.1 · 1 row entry · 1 columns
Open in standard view 
A table that contains information about the
GVRP port configurations on this switch.
hpicfBridgeGvrpPortEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.1.1
GVRP information associated with a single port.
Indexes
No indexes recorded
Column Syntax OID
hpicfBridgeGvrpRestrictedVlanReg
Controls GVRP's ability to learn new VLANs on
this port. When set to 'false', GVRP will accept
JOIN requests for new VLANs on this port. When
set to 'true', GVRP will only process protocol
packets that concern themsel…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.1.1.1

hpicfBridgeGvrpStateMachineTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.2 · 1 row entry · 3 columns
Open in standard view 
A table that contains information about the
GVRP state Machine(s) configuration.
hpicfBridgeGvrpStateMachineEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.2.1
A row in a table, containing the VLAN ID and Portlist.
Indexes
hpicfGenericVlanId IF-MIBifIndex
Column Syntax OID
hpicfGenericVlanId
The VLAN ID to which this entry belongs.
Q-BRIDGE-MIBVlanId
Textual Convention: Q-BRIDGE-MIBVlanId Integer32
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.2.1.1
hpicfApplicantStateMachine
This MIB provides the Applicant State Machine values of
the GVRP enabled port as follows,0 = va, 1 = aa,2 = qa,
3 = la,4 = vp,5 = ap,6 = qp,7 = vo,8 = ao,9 = qo,10 = lo,
11 = von,12 = aon,13 = qon. Whereas, the first …
Enumeration
Enumerated Values:
0va
1aa
2qa
3la
4vp
5ap
6qp
7vo
8ao
9qo
10lo
11von
12aon
13qon
 .1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.2.1.2
hpicfRegistarStateMachine
This MIB provides the Registrar state machine value for the
GVRP enabled port as follows,0 = inn,1 = lv,2 = l3,3 = l2,
4 = l1,5 = mt,6 = inr,7 = lvr,8 = l3r,9 = l2r,10 = l1r,11 = mtr,
12 = inf,13 = lvf,14 = l3f,15 = l2…
Enumeration
Enumerated Values:
0inn
1lv
2l3
3l2
4l1
5mt
6inr
7lvr
8l3r
9l2r
10l1r
11mtr
12inf
13lvf
14l3f
15l2f
16l1f
17mtf
 .1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.2.1.3

hpicfBridgeRstpPortTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5 · 1 row entry · 9 columns
Open in standard view 
A table that contains information about STP configuration on all ports.
hpicfBridgeRstpPortEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1
An entry in the hpicfBridgeRstpPortTable which holds the information of STP
configuration of a port. An entry is available for each port in this table.
Indexes
hpicfBridgeRstpPortIndex
Column Syntax OID
hpicfBridgeRstpPortIndex
The port number of the port for which this entry
contains Spanning Tree Protocol management
information.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.1
hpicfBridgeRstpAdminEdgePort
Indicate that port is connected to LAN segment that don't
have any bridge connected to it
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.2
hpicfBridgeRstpOperEdgePort
Reflects the value of the operEdgePort parameter, as
defined by the operation of the Bridge Detection state
machine (Clause 18 of P802.1t). The value of this parameter
is used by a Designated Port in order to determine…
Enumeration
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.3
hpicfBridgeRstpAdminPointToPointMac
forceTrue: This value indicates that the administrator requires the MAC
to be treated as if it is connected to a point-to-point LAN
segment, regardless of any indications to the contrary that
…
Enumerationr/w
Enumerated Values:
1forceTrue
2forceFalse
3auto
 .1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.4
hpicfBridgeRstpOperPointToPointMac
true: This value indicates that the MAC is connected to a
point-to-point LAN segment; i.e., there is at most one other
system attached to the LAN segment.
false: This value indicates that the MAC is connec…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.5
hpicfBridgeRstpPortPathCost
The administratively assigned value for the contribution
of this port to the path cost of paths toward the spanning
tree root.

Writing a value of '0' assigns the automatically calculated
default Path Cost…
Integer32r/w
Constraints:
range: 0-200000000
 .1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.6
hpicfBridgeRstpForceBpduMigrationCheck
When operating in RSTP version 2 or later,
writing TRUE(1) to this object forces this port to
transmit RSTP BPDUs. Any other operation on this object
always returns FALSE(2) when read.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.7
hpicfBridgeRstpAutoEdgePort
This object determines the identification of edge ports.
When set to TRUE, it is used by the bridge detection state
machine for automatic identification of edge ports.
The default value is FALSE.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.8
hpicfBridgeRstpPortBpduFiltering
This objects determines the BPDU filtering on ports.
When set to TRUE, the port does not transmit any BPDU and all the
received BPDUs are dropped. When set to FALSE, all the BPDUs are
processed normally. The default …
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.9

hpicfBridgeLoopProtectPortTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1 · 1 row entry · 6 columns
Open in standard view 
Per-interface configuration for Loop Protection.
hpicfBridgeLoopProtectPortEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1
Loop Protection configuration information for
a single port.
Indexes
IF-MIBifIndex
Column Syntax OID
hpicfBridgeLoopProtectPortEnable
This object indicates whether the Loop Protection is enabled
on a port. The default value is FALSE
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.1
hpicfBridgeLoopProtectPortLoopDetected
This object will be set to TRUE when a loop is detected on
the port. The value of this object will be reset to FALSE when
the port's hpicfBridgeLoopProtectPortEnable is set to
FALSE.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.2
hpicfBridgeLoopProtectPortLastLoopTime
The value of sysUpTime when a loop was last detected
on this port. A value of 0 means that the timestamp has
not been set.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.3
hpicfBridgeLoopProtectPortLoopCount
This object provides the number of loops detected on a Loop Protection enabled
port. The value of this object is set to zero when Loop Protection is disabled on
a port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.4
hpicfBridgeLoopProtectPortReceiverAction
Controls the action taken when a Loop Protection packet is
received on this port.
When set to 'disableTx' the port that transmitted the packet is disabled.

When set to 'noDisable' the transmitting port is…
LoopProtectReceiverActionr/w
Textual Convention: LoopProtectReceiverAction Enumeration
Type Values:
1disableTx
2noDisable
3disableTxRx
4disableRx
 .1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.5
hpicfBridgeLoopDetectedVlan
Refers to this object for the port on which loop is
detected.
Integer32
Constraints:
range: 1-4096
 .1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.6

hpicfBridgeMirrorSessionTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.2.1 · 1 row entry · 3 columns
Open in standard view 
This table contains mirror session information 
related to a given specified destination. A mirror 
session is a group of one or more portCopyEntries 
all having the same specified destination. A given
specified destination may be associated with more
then one mirror session.
hpicfBridgeMirrorSessionEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.2.1.1
An entry in the hpicfBridgeMirrorSessionEntry contains
mirror session specific identification
information.
Indexes
No indexes recorded
Column Syntax OID
hpicfBridgeMirrorSessionID
This variable is valid only for mirroring
transfers. It allows mirroring destinations
to be grouped. A given hpicfBridgeMirrorSessionID
can only be used with 1 destination. However,
multiple sources may be related to th…
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.2.1.1.1
hpicfBridgeDontTagWithVlan
This objects determines whether to include IEEE 802.1Q
tag in the mirrored copy of the packet.

When the value of this object is set to 1 ('enabled'),
the IEEE 802.1Q VLAN tag is not included in the
mirr…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.2.1.1.2
hpicfBridgeMirrorSessionType
This oid mentions what is the source type of traffic
associated with mirror session.
noMirror Not associated with any mirroring.
mirrorAddresses Mirror traffic based on addresses
mirrorPolicies Mirror traffic ba…
Enumerationr/w
Enumerated Values:
1noMirror
2mirrorAddresses
3mirrorPolicies
4mirrorPorts
5mirrorVlan
 .1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.2.1.1.3

hpicfBridgeVoiceVlanConfigTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.7.1 · 1 row entry · 1 columns
Open in standard view 
An HP proprietary extension to the dot1qVlanStaticTable to 
configure a Voice VLAN.
hpicfBridgeVoiceVlanConfigEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.12.1.7.1.1
An entry for HP Specific extension table.
Indexes
No indexes recorded
Column Syntax OID
hpicfBridgeVoiceVlanEnable
Labels the VLAN as a Voice VLAN which allows
to separate, prioritize, and authenticate voice
traffic moving through the network.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.5.1.12.1.7.1.1.1

hpicfBridgeJumboInterfaceConfigTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.8.1 · 1 row entry · 1 columns
Open in standard view 
This table contains the jumbo frame configuration of
all interfaces.
hpicfBridgeJumboInterfaceConfigEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.12.1.8.1.1
An entry in the hpicfBridgeJumboInterfaceConfigTable, which contains
the jumbo frame configuration of an interface.
Indexes
IF-MIBifIndex
Column Syntax OID
hpicfBridgeJumboInterfaceEnable
This object enables or disables the support for jumbo frames. This configuration
is supported only on VLAN interfaces.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.5.1.12.1.8.1.1.1

hpicfBridgeManagementInterfaceConfigTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.9.1 · 1 row entry · 1 columns
Open in standard view 
This table contains objects for configuring interface as
Management interface.
hpicfBridgeManagementInterfaceConfigEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.12.1.9.1.1
An entry in the hpicfBridgeManagementInterfaceConfigEntry
contains objects for configuring interface as management
interface.
Indexes
IF-MIBifIndex
Column Syntax OID
hpicfBridgeManagementInterfaceEnable
This object configures a VLAN as a Secure Management VLAN.
When the value of this object is set to TRUE, a VLAN acts as a Secure
Management VLAN. The default value of this object is FALSE for all VLANs.
For VLAN with V…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.5.1.12.1.9.1.1.1